--- /dev/null
+#ifndef _MAX1363_H_
+#define _MAX1363_H_
+
+#define MAX1363_SETUP_BYTE(a) ((a) | 0x80)
+
+/* There is a fair bit more defined here than currently
+ * used, but the intention is to support everything these
+ * chips do in the long run */
+
+/* see data sheets */
+/* max1363 and max1236, max1237, max1238, max1239 */
+#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD 0x00
+#define MAX1363_SETUP_AIN3_IS_REF_EXT_TO_REF 0x20
+#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_INT 0x40
+#define MAX1363_SETUP_AIN3_IS_REF_REF_IS_INT 0x60
+#define MAX1363_SETUP_POWER_UP_INT_REF 0x10
+#define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00
+
+/* think about includeing max11600 etc - more settings */
+#define MAX1363_SETUP_EXT_CLOCK 0x08
+#define MAX1363_SETUP_INT_CLOCK 0x00
+#define MAX1363_SETUP_UNIPOLAR 0x00
+#define MAX1363_SETUP_BIPOLAR 0x04
+#define MAX1363_SETUP_RESET 0x00
+#define MAX1363_SETUP_NORESET 0x02
+/* max1363 only - though don't care on others.
+ * For now monitor modes are not implemented as the relevant
+ * line is not connected on my test board.
+ * The definitions are here as I intend to add this soon.
+ */
+#define MAX1363_SETUP_MONITOR_SETUP 0x01
+
+/* Specific to the max1363 */
+#define MAX1363_MON_RESET_CHAN(a) (1 << ((a) + 4))
+#define MAX1363_MON_CONV_RATE_133ksps 0
+#define MAX1363_MON_CONV_RATE_66_5ksps 0x02
+#define MAX1363_MON_CONV_RATE_33_3ksps 0x04
+#define MAX1363_MON_CONV_RATE_16_6ksps 0x06
+#define MAX1363_MON_CONV_RATE_8_3ksps 0x08
+#define MAX1363_MON_CONV_RATE_4_2ksps 0x0A
+#define MAX1363_MON_CONV_RATE_2_0ksps 0x0C
+#define MAX1363_MON_CONV_RATE_1_0ksps 0x0E
+#define MAX1363_MON_INT_ENABLE 0x01
+
+/* defined for readability reasons */
+/* All chips */
+#define MAX1363_CONFIG_BYTE(a) ((a))
+
+#define MAX1363_CONFIG_SE 0x01
+#define MAX1363_CONFIG_DE 0x00
+#define MAX1363_CONFIG_SCAN_TO_CS 0x00
+#define MAX1363_CONFIG_SCAN_SINGLE_8 0x20
+#define MAX1363_CONFIG_SCAN_MONITOR_MODE 0x40
+#define MAX1363_CONFIG_SCAN_SINGLE_1 0x60
+/* max123{6-9} only */
+#define MAX1236_SCAN_MID_TO_CHANNEL 0x40
+
+/* max1363 only - merely part of channel selects or don't care for others*/
+#define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
+
+#define MAX1363_CHANNEL_SEL(a) ((a) << 1)
+
+/* max1363 strictly 0x06 - but doesn't matter */
+#define MAX1363_CHANNEL_SEL_MASK 0x1E
+#define MAX1363_SCAN_MASK 0x60
+#define MAX1363_SE_DE_MASK 0x01
+
+/**
+ * struct max1363_mode - scan mode information
+ * @name: Name used to identify the scan mode.
+ * @conf: The corresponding value of the configuration register
+ * @numvals: The number of values returned by a single scan
+ */
+struct max1363_mode {
+ const char *name;
+ int8_t conf;
+ int numvals;
+};
+
+#define MAX1363_MODE_SINGLE(_num) { \
+ .name = #_num, \
+ .conf = MAX1363_CHANNEL_SEL(_num) \
+ | MAX1363_CONFIG_SCAN_SINGLE_1 \
+ | MAX1363_CONFIG_SE, \
+ .numvals = 1, \
+ }
+
+#define MAX1363_MODE_SINGLE_TIMES_8(_num) { \
+ .name = #_num"x8", \
+ .conf = MAX1363_CHANNEL_SEL(_num) \
+ | MAX1363_CONFIG_SCAN_SINGLE_8 \
+ | MAX1363_CONFIG_SE, \
+ .numvals = 8, \
+ }
+
+#define MAX1363_MODE_SCAN_TO_CHANNEL(_num) { \
+ .name = "0..."#_num, \
+ .conf = MAX1363_CHANNEL_SEL(_num) \
+ | MAX1363_CONFIG_SCAN_TO_CS \
+ | MAX1363_CONFIG_SE, \
+ .numvals = _num + 1, \
+ }
+
+
+/* note not available for max1363 hence naming */
+#define MAX1236_MODE_SCAN_MID_TO_CHANNEL(_mid, _num) { \
+ .name = #_mid"..."#_num, \
+ .conf = MAX1363_CHANNEL_SEL(_num) \
+ | MAX1236_SCAN_MID_TO_CHANNEL \
+ | MAX1363_CONFIG_SE, \
+ .numvals = _num - _mid + 1 \
+}
+
+#define MAX1363_MODE_DIFF_SINGLE(_nump, _numm) { \
+ .name = #_nump"-"#_numm, \
+ .conf = MAX1363_CHANNEL_SEL(_nump) \
+ | MAX1363_CONFIG_SCAN_SINGLE_1 \
+ | MAX1363_CONFIG_DE, \
+ .numvals = 1, \
+ }
+
+#define MAX1363_MODE_DIFF_SINGLE_TIMES_8(_nump, _numm) { \
+ .name = #_nump"-"#_numm, \
+ .conf = MAX1363_CHANNEL_SEL(_nump) \
+ | MAX1363_CONFIG_SCAN_SINGLE_8 \
+ | MAX1363_CONFIG_DE, \
+ .numvals = 1, \
+ }
+
+/* Can't think how to automate naming so specify for now */
+#define MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(_name, _num, _numvals) { \
+ .name = #_name, \
+ .conf = MAX1363_CHANNEL_SEL(_num) \
+ | MAX1363_CONFIG_SCAN_TO_CS \
+ | MAX1363_CONFIG_DE, \
+ .numvals = _numvals, \
+ }
+
+/* note only available for max1363 hence naming */
+#define MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL_NAMED(_name, _num, _numvals) { \
+ .name = #_name, \
+ .conf = MAX1363_CHANNEL_SEL(_num) \
+ | MAX1236_SCAN_MID_TO_CHANNEL \
+ | MAX1363_CONFIG_SE, \
+ .numvals = _numvals, \
+}
+
+/* Not currently handled */
+#define MAX1363_MODE_MONITOR { \
+ .name = "monitor", \
+ .conf = MAX1363_CHANNEL_SEL(3) \
+ | MAX1363_CONFIG_SCAN_MONITOR_MODE \
+ | MAX1363_CONFIG_SE, \
+ .numvals = 10, \
+ }
+
+/* This may seem an overly long winded way to do this, but at least it makes
+ * clear what all the various options actually do. Alternative suggestions
+ * that don't require user to have intimate knowledge of the chip welcomed.
+ */
+
+/* This must be maintained along side the max1363_mode_table in max1363_core */
+enum max1363_modes {
+ /* Single read of a single channel */
+ _s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
+ /* Eight reads of a single channel */
+ se0, se1, se2, se3, se4, se5, se6, se7, se8, se9, se10, se11,
+ /* Scan to channel */
+ s0to1, s0to2, s0to3, s0to4, s0to5, s0to6,
+ s0to7, s0to8, s0to9, s0to10, s0to11,
+ /* Differential single read */
+ d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
+ d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
+ /* Differential single read 8 times */
+ de0m1, de2m3, de4m5, de6m7, de8m9, de10m11,
+ de1m0, de3m2, de5m4, de7m6, de9m8, de11m10,
+ /* Differential scan to channel */
+ d0m1to2m3, d0m1to4m5, d0m1to6m7, d0m1to8m9, d0m1to10m11,
+ d1m0to3m2, d1m0to5m4, d1m0to7m6, d1m0to9m8, d1m0to11m10,
+ /* Scan mid to channel max123{6-9} only */
+ s2to3, s6to7, s6to8, s6to9, s6to10, s6to11,
+ /* Differential scan mid to channel */
+ s6m7to8m9, s6m7to10m11, s7m6to9m8, s7m6to11m10,
+};
+
+/**
+ * struct max1363_chip_info - chip specifc information
+ * @name: indentification string for chip
+ * @num_inputs: number of physical inputs on chip
+ * @int_vref_mv: the internal reference voltage
+ * @monitor_mode: whether the chip supports monitor interrupts
+ * @mode_list: array of available scan modes
+ * @num_modes: the number of scan modes available
+ * @default_mode: the scan mode in which the chip starts up
+ */
+struct max1363_chip_info {
+ const char *name;
+ u8 num_inputs;
+ u16 int_vref_mv;
+ bool monitor_mode;
+ const enum max1363_modes *mode_list;
+ int num_modes;
+ enum max1363_modes default_mode;
+};
+
+
+/**
+ * struct max1363_state - driver instance specific data
+ * @indio_dev: the industrial I/O device
+ * @client: i2c_client
+ * @setupbyte: cache of current device setup byte
+ * @configbyte: cache of current device config byte
+ * @chip_info: chip model specific constants, available modes etc
+ * @current_mode: the scan mode of this chip
+ * @poll_work: bottom half of polling interrupt handler
+ * @protect_ring: used to ensure only one polling bh running at a time
+ * @reg: supply regulator
+ */
+struct max1363_state {
+ struct iio_dev *indio_dev;
+ struct i2c_client *client;
+ char setupbyte;
+ char configbyte;
+ const struct max1363_chip_info *chip_info;
+ const struct max1363_mode *current_mode;
+ struct work_struct poll_work;
+ atomic_t protect_ring;
+ struct iio_trigger *trig;
+ struct regulator *reg;
+};
+
+static inline void max1363_uninitialize_ring(struct iio_ring_buffer *ring)
+{
+};
+
+static inline int max1363_initialize_ring(struct iio_ring_buffer *ring)
+{
+ return 0;
+};
+
+
+static inline ssize_t max1363_scan_from_ring(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return 0;
+};
+
+static inline int
+max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev)
+{
+ return 0;
+};
+
+static inline void max1363_ring_cleanup(struct iio_dev *indio_dev) {};
+
+#endif /* _MAX1363_H_ */
--- /dev/null
+ /*
+ * linux/drivers/industrialio/adc/max1363.c
+ * Copyright (C) 2008 Jonathan Cameron
+ *
+ * based on linux/drivers/i2c/chips/max123x
+ * Copyright (C) 2002-2004 Stefan Eletzhofer
+ *
+ * based on linux/drivers/acron/char/pcf8583.c
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * max1363.c
+ *
+ * Partial support for max1363 and similar chips.
+ *
+ * Not currently implemented.
+ *
+ * - Monitor interrrupt generation.
+ * - Control of internal reference.
+ * - Sysfs scan interface currently assumes unipolar mode.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/regulator/consumer.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+
+#include "max1363.h"
+
+/* Available scan modes.
+ * Awkwardly the associated enum is in the header so it is available to
+ * the ring buffer code.
+ */
+static const struct max1363_mode max1363_mode_table[] = {
+ MAX1363_MODE_SINGLE(0),
+ MAX1363_MODE_SINGLE(1),
+ MAX1363_MODE_SINGLE(2),
+ MAX1363_MODE_SINGLE(3),
+ MAX1363_MODE_SINGLE(4),
+ MAX1363_MODE_SINGLE(5),
+ MAX1363_MODE_SINGLE(6),
+ MAX1363_MODE_SINGLE(7),
+ MAX1363_MODE_SINGLE(8),
+ MAX1363_MODE_SINGLE(9),
+ MAX1363_MODE_SINGLE(10),
+ MAX1363_MODE_SINGLE(11),
+
+ MAX1363_MODE_SINGLE_TIMES_8(0),
+ MAX1363_MODE_SINGLE_TIMES_8(1),
+ MAX1363_MODE_SINGLE_TIMES_8(2),
+ MAX1363_MODE_SINGLE_TIMES_8(3),
+ MAX1363_MODE_SINGLE_TIMES_8(4),
+ MAX1363_MODE_SINGLE_TIMES_8(5),
+ MAX1363_MODE_SINGLE_TIMES_8(6),
+ MAX1363_MODE_SINGLE_TIMES_8(7),
+ MAX1363_MODE_SINGLE_TIMES_8(8),
+ MAX1363_MODE_SINGLE_TIMES_8(9),
+ MAX1363_MODE_SINGLE_TIMES_8(10),
+ MAX1363_MODE_SINGLE_TIMES_8(11),
+
+ MAX1363_MODE_SCAN_TO_CHANNEL(1),
+ MAX1363_MODE_SCAN_TO_CHANNEL(2),
+ MAX1363_MODE_SCAN_TO_CHANNEL(3),
+ MAX1363_MODE_SCAN_TO_CHANNEL(4),
+ MAX1363_MODE_SCAN_TO_CHANNEL(5),
+ MAX1363_MODE_SCAN_TO_CHANNEL(6),
+ MAX1363_MODE_SCAN_TO_CHANNEL(7),
+ MAX1363_MODE_SCAN_TO_CHANNEL(8),
+ MAX1363_MODE_SCAN_TO_CHANNEL(9),
+ MAX1363_MODE_SCAN_TO_CHANNEL(10),
+ MAX1363_MODE_SCAN_TO_CHANNEL(11),
+
+ MAX1363_MODE_DIFF_SINGLE(0, 1),
+ MAX1363_MODE_DIFF_SINGLE(2, 3),
+ MAX1363_MODE_DIFF_SINGLE(4, 5),
+ MAX1363_MODE_DIFF_SINGLE(6, 7),
+ MAX1363_MODE_DIFF_SINGLE(8, 9),
+ MAX1363_MODE_DIFF_SINGLE(10, 11),
+ MAX1363_MODE_DIFF_SINGLE(1, 0),
+ MAX1363_MODE_DIFF_SINGLE(3, 2),
+ MAX1363_MODE_DIFF_SINGLE(5, 4),
+ MAX1363_MODE_DIFF_SINGLE(7, 6),
+ MAX1363_MODE_DIFF_SINGLE(9, 8),
+ MAX1363_MODE_DIFF_SINGLE(11, 10),
+
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(0, 1),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(2, 3),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(4, 5),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(6, 7),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(8, 9),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(10, 11),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(1, 0),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(3, 2),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(5, 4),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(7, 6),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(9, 8),
+ MAX1363_MODE_DIFF_SINGLE_TIMES_8(11, 10),
+
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(0-1...2-3, 2, 2),
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(0-1...4-5, 4, 3),
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(0-1...6-7, 6, 4),
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(0-1...8-9, 8, 5),
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(0-1...10-11, 10, 6),
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(1-0...3-2, 3, 2),
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(1-0...5-4, 5, 3),
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(1-0...7-6, 7, 4),
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(1-0...9-8, 9, 5),
+ MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(1-0...11-10, 11, 6),
+
+ MAX1236_MODE_SCAN_MID_TO_CHANNEL(2, 3),
+ MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 7),
+ MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 8),
+ MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 9),
+ MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 10),
+ MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 11),
+
+ MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL_NAMED(6-7...8-9, 8, 2),
+ MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL_NAMED(6-7...10-11, 10, 3),
+ MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL_NAMED(7-6...9-8, 9, 2),
+ MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL_NAMED(7-6...11-10, 11, 3),
+};
+
+/* Applies to max1363 */
+static const enum max1363_modes max1363_mode_list[] = {
+ _s0, _s1, _s2, _s3,
+ se0, se1, se2, se3,
+ s0to1, s0to2, s0to3,
+ d0m1, d2m3, d1m0, d3m2,
+ de0m1, de2m3, de1m0, de3m2,
+ d0m1to2m3, d1m0to3m2,
+};
+
+/* Appies to max1236, max1237 */
+static const enum max1363_modes max1236_mode_list[] = {
+ _s0, _s1, _s2, _s3,
+ se0, se1, se2, se3,
+ s0to1, s0to2, s0to3,
+ d0m1, d2m3, d1m0, d3m2,
+ de0m1, de2m3, de1m0, de3m2,
+ d0m1to2m3, d1m0to3m2,
+ s2to3,
+};
+
+/* Applies to max1238, max1239 */
+static const enum max1363_modes max1238_mode_list[] = {
+ _s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
+ se0, se1, se2, se3, se4, se5, se6, se7, se8, se9, se10, se11,
+ s0to1, s0to2, s0to3, s0to4, s0to5, s0to6,
+ s0to7, s0to8, s0to9, s0to10, s0to11,
+ d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
+ d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
+ de0m1, de2m3, de4m5, de6m7, de8m9, de10m11,
+ de1m0, de3m2, de5m4, de7m6, de9m8, de11m10,
+ d0m1to2m3, d0m1to4m5, d0m1to6m7, d0m1to8m9, d0m1to10m11,
+ d1m0to3m2, d1m0to5m4, d1m0to7m6, d1m0to9m8, d1m0to11m10,
+ s6to7, s6to8, s6to9, s6to10, s6to11,
+ s6m7to8m9, s6m7to10m11, s7m6to9m8, s7m6to11m10,
+};
+
+
+enum { max1361,
+ max1362,
+ max1363,
+ max1364,
+ max1136,
+ max1137,
+ max1138,
+ max1139,
+ max1236,
+ max1237,
+ max1238,
+ max1239,
+};
+
+/* max1363 and max1368 tested - rest from data sheet */
+static const struct max1363_chip_info max1363_chip_info_tbl[] = {
+ {
+ .name = "max1361",
+ .num_inputs = 4,
+ .monitor_mode = 1,
+ .mode_list = max1363_mode_list,
+ .num_modes = ARRAY_SIZE(max1363_mode_list),
+ .default_mode = s0to3,
+ }, {
+ .name = "max1362",
+ .num_inputs = 4,
+ .monitor_mode = 1,
+ .mode_list = max1363_mode_list,
+ .num_modes = ARRAY_SIZE(max1363_mode_list),
+ .default_mode = s0to3,
+ }, {
+ .name = "max1363",
+ .num_inputs = 4,
+ .monitor_mode = 1,
+ .mode_list = max1363_mode_list,
+ .num_modes = ARRAY_SIZE(max1363_mode_list),
+ .default_mode = s0to3,
+ }, {
+ .name = "max1364",
+ .num_inputs = 4,
+ .monitor_mode = 1,
+ .mode_list = max1363_mode_list,
+ .num_modes = ARRAY_SIZE(max1363_mode_list),
+ .default_mode = s0to3,
+ }, {
+ .name = "max1136",
+ .num_inputs = 4,
+ .int_vref_mv = 4096,
+ .mode_list = max1236_mode_list,
+ .num_modes = ARRAY_SIZE(max1236_mode_list),
+ .default_mode = s0to3,
+ }, {
+ .name = "max1137",
+ .num_inputs = 4,
+ .int_vref_mv = 2048,
+ .mode_list = max1236_mode_list,
+ .num_modes = ARRAY_SIZE(max1236_mode_list),
+ .default_mode = s0to3,
+ }, {
+ .name = "max1138",
+ .num_inputs = 12,
+ .int_vref_mv = 4096,
+ .mode_list = max1238_mode_list,
+ .num_modes = ARRAY_SIZE(max1238_mode_list),
+ .default_mode = s0to11,
+ }, {
+ .name = "max1139",
+ .num_inputs = 12,
+ .int_vref_mv = 2048,
+ .mode_list = max1238_mode_list,
+ .num_modes = ARRAY_SIZE(max1238_mode_list),
+ .default_mode = s0to11,
+ }, {
+ .name = "max1236",
+ .num_inputs = 4,
+ .int_vref_mv = 4096,
+ .mode_list = max1236_mode_list,
+ .num_modes = ARRAY_SIZE(max1236_mode_list),
+ .default_mode = s0to3,
+ }, {
+ .name = "max1237",
+ .num_inputs = 4,
+ .int_vref_mv = 2048,
+ .mode_list = max1236_mode_list,
+ .num_modes = ARRAY_SIZE(max1236_mode_list),
+ .default_mode = s0to3,
+ }, {
+ .name = "max1238",
+ .num_inputs = 12,
+ .int_vref_mv = 4096,
+ .mode_list = max1238_mode_list,
+ .num_modes = ARRAY_SIZE(max1238_mode_list),
+ .default_mode = s0to11,
+ }, {
+ .name = "max1239",
+ .num_inputs = 12,
+ .int_vref_mv = 2048,
+ .mode_list = max1238_mode_list,
+ .num_modes = ARRAY_SIZE(max1238_mode_list),
+ .default_mode = s0to11,
+ },
+};
+
+static int max1363_write_basic_config(struct i2c_client *client,
+ unsigned char d1,
+ unsigned char d2)
+{
+ int ret;
+ u8 *tx_buf = kmalloc(2 , GFP_KERNEL);
+ if (!tx_buf)
+ return -ENOMEM;
+ tx_buf[0] = d1;
+ tx_buf[1] = d2;
+
+ ret = i2c_master_send(client, tx_buf, 2);
+ kfree(tx_buf);
+ return (ret > 0) ? 0 : ret;
+}
+
+static int max1363_set_scan_mode(struct max1363_state *st)
+{
+ st->configbyte &= ~(MAX1363_CHANNEL_SEL_MASK
+ | MAX1363_SCAN_MASK
+ | MAX1363_SE_DE_MASK);
+ st->configbyte |= st->current_mode->conf;
+
+ return max1363_write_basic_config(st->client,
+ st->setupbyte,
+ st->configbyte);
+}
+
+static int max1363_initial_setup(struct max1363_state *st)
+{
+ st->setupbyte = MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD
+ | MAX1363_SETUP_POWER_UP_INT_REF
+ | MAX1363_SETUP_INT_CLOCK
+ | MAX1363_SETUP_UNIPOLAR
+ | MAX1363_SETUP_NORESET;
+
+ /* Set scan mode writes the config anyway so wait until then*/
+ st->setupbyte = MAX1363_SETUP_BYTE(st->setupbyte);
+ st->current_mode = &max1363_mode_table[st->chip_info->default_mode];
+ st->configbyte = MAX1363_CONFIG_BYTE(st->configbyte);
+
+ return max1363_set_scan_mode(st);
+}
+
+static ssize_t max1363_show_av_scan_modes(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *dev_info = dev_get_drvdata(dev);
+ struct max1363_state *st = dev_info->dev_data;
+ int i, len = 0;
+
+ for (i = 0; i < st->chip_info->num_modes; i++)
+ len += sprintf(buf + len, "%s ",
+ max1363_mode_table[st->chip_info
+ ->mode_list[i]].name);
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+
+/* The dev here is the sysfs related one, not the underlying i2c one */
+static ssize_t max1363_scan_direct(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *dev_info = dev_get_drvdata(dev);
+ struct max1363_state *st = dev_info->dev_data;
+ int len = 0, ret, i;
+ struct i2c_client *client = st->client;
+ char *rxbuf;
+
+ if (st->current_mode->numvals == 0)
+ return 0;
+ rxbuf = kmalloc(st->current_mode->numvals*2, GFP_KERNEL);
+ if (rxbuf == NULL)
+ return -ENOMEM;
+
+ /* Interpretation depends on whether these are signed or not!*/
+ /* Assume not for now */
+ ret = i2c_master_recv(client, rxbuf, st->current_mode->numvals*2);
+
+ if (ret < 0)
+ return ret;
+ for (i = 0; i < st->current_mode->numvals; i++)
+ len += sprintf(buf+len, "%d ",
+ ((int)(rxbuf[i*2+0]&0x0F) << 8)
+ + ((int)(rxbuf[i*2+1])));
+ kfree(rxbuf);
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static ssize_t max1363_scan(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *dev_info = dev_get_drvdata(dev);
+ int ret;
+
+ mutex_lock(&dev_info->mlock);
+ if (dev_info->currentmode == INDIO_RING_TRIGGERED)
+ ret = max1363_scan_from_ring(dev, attr, buf);
+ else
+ ret = max1363_scan_direct(dev, attr, buf);
+ mutex_unlock(&dev_info->mlock);
+
+ return ret;
+}
+
+/* Cannot query the device, so use local copy of state */
+static ssize_t max1363_show_scan_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *dev_info = dev_get_drvdata(dev);
+ struct max1363_state *st = dev_info->dev_data;
+
+ return sprintf(buf, "%s\n", st->current_mode->name);
+}
+
+static const struct max1363_mode
+*__max1363_find_mode_in_ci(const struct max1363_chip_info *info,
+ const char *buf)
+{
+ int i;
+ for (i = 0; i < info->num_modes; i++)
+ if (strcmp(max1363_mode_table[info->mode_list[i]].name, buf)
+ == 0)
+ return &max1363_mode_table[info->mode_list[i]];
+ return NULL;
+}
+
+static ssize_t max1363_store_scan_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *dev_info = dev_get_drvdata(dev);
+ struct max1363_state *st = dev_info->dev_data;
+ const struct max1363_mode *new_mode;
+ int ret;
+
+ mutex_lock(&dev_info->mlock);
+ new_mode = NULL;
+ /* Avoid state changes if a ring buffer is enabled */
+ if (!iio_ring_enabled(dev_info)) {
+ new_mode
+ = __max1363_find_mode_in_ci(st->chip_info, buf);
+ if (!new_mode) {
+ ret = -EINVAL;
+ goto error_ret;
+ }
+ st->current_mode = new_mode;
+ ret = max1363_set_scan_mode(st);
+ if (ret)
+ goto error_ret;
+ } else {
+ ret = -EBUSY;
+ goto error_ret;
+ }
+ mutex_unlock(&dev_info->mlock);
+
+ return len;
+
+error_ret:
+ mutex_unlock(&dev_info->mlock);
+
+ return ret;
+}
+
+IIO_DEV_ATTR_AVAIL_SCAN_MODES(max1363_show_av_scan_modes);
+IIO_DEV_ATTR_SCAN_MODE(S_IRUGO | S_IWUSR,
+ max1363_show_scan_mode,
+ max1363_store_scan_mode);
+
+IIO_DEV_ATTR_SCAN(max1363_scan);
+
+static ssize_t max1363_show_name(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *dev_info = dev_get_drvdata(dev);
+ struct max1363_state *st = dev_info->dev_data;
+ return sprintf(buf, "%s\n", st->chip_info->name);
+}
+
+IIO_DEVICE_ATTR(name, S_IRUGO, max1363_show_name, NULL, 0);
+
+/*name export */
+
+static struct attribute *max1363_attributes[] = {
+ &iio_dev_attr_available_scan_modes.dev_attr.attr,
+ &iio_dev_attr_scan_mode.dev_attr.attr,
+ &iio_dev_attr_scan.dev_attr.attr,
+ &iio_dev_attr_name.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group max1363_attribute_group = {
+ .attrs = max1363_attributes,
+};
+
+static int __devinit max1363_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret, i, regdone = 0;
+ struct max1363_state *st = kzalloc(sizeof(*st), GFP_KERNEL);
+ if (st == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+
+ /* this is only used for device removal purposes */
+ i2c_set_clientdata(client, st);
+
+ atomic_set(&st->protect_ring, 0);
+
+ /* Find the chip model specific data */
+ for (i = 0; i < ARRAY_SIZE(max1363_chip_info_tbl); i++)
+ if (!strcmp(max1363_chip_info_tbl[i].name, id->name)) {
+ st->chip_info = &max1363_chip_info_tbl[i];
+ break;
+ };
+ /* Unsupported chip */
+ if (!st->chip_info) {
+ dev_err(&client->dev, "%s is not supported\n", id->name);
+ ret = -ENODEV;
+ goto error_free_st;
+ }
+ st->reg = regulator_get(&client->dev, "vcc");
+ if (!IS_ERR(st->reg)) {
+ ret = regulator_enable(st->reg);
+ if (ret)
+ goto error_put_reg;
+ }
+ st->client = client;
+
+ st->indio_dev = iio_allocate_device();
+ if (st->indio_dev == NULL) {
+ ret = -ENOMEM;
+ goto error_disable_reg;
+ }
+
+ /* Estabilish that the iio_dev is a child of the i2c device */
+ st->indio_dev->dev.parent = &client->dev;
+ st->indio_dev->attrs = &max1363_attribute_group;
+ st->indio_dev->dev_data = (void *)(st);
+ st->indio_dev->driver_module = THIS_MODULE;
+ st->indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = max1363_initial_setup(st);
+ if (ret)
+ goto error_free_device;
+
+ ret = max1363_register_ring_funcs_and_init(st->indio_dev);
+ if (ret)
+ goto error_free_device;
+
+ ret = iio_device_register(st->indio_dev);
+ if (ret)
+ goto error_cleanup_ring;
+ regdone = 1;
+ ret = max1363_initialize_ring(st->indio_dev->ring);
+ if (ret)
+ goto error_cleanup_ring;
+ return 0;
+error_cleanup_ring:
+ max1363_ring_cleanup(st->indio_dev);
+error_free_device:
+ if (!regdone)
+ iio_free_device(st->indio_dev);
+ else
+ iio_device_unregister(st->indio_dev);
+error_disable_reg:
+ if (!IS_ERR(st->reg))
+ regulator_disable(st->reg);
+error_put_reg:
+ if (!IS_ERR(st->reg))
+ regulator_put(st->reg);
+error_free_st:
+ kfree(st);
+
+error_ret:
+ return ret;
+}
+
+static int max1363_remove(struct i2c_client *client)
+{
+ struct max1363_state *st = i2c_get_clientdata(client);
+ struct iio_dev *indio_dev = st->indio_dev;
+ max1363_uninitialize_ring(indio_dev->ring);
+ max1363_ring_cleanup(indio_dev);
+ iio_device_unregister(indio_dev);
+ if (!IS_ERR(st->reg)) {
+ regulator_disable(st->reg);
+ regulator_put(st->reg);
+ }
+ kfree(st);
+
+ return 0;
+}
+
+static const struct i2c_device_id max1363_id[] = {
+ { "max1361", max1361 },
+ { "max1362", max1362 },
+ { "max1363", max1363 },
+ { "max1364", max1364 },
+ { "max1136", max1136 },
+ { "max1137", max1137 },
+ { "max1138", max1138 },
+ { "max1139", max1139 },
+ { "max1236", max1236 },
+ { "max1237", max1237 },
+ { "max1238", max1238 },
+ { "max1239", max1239 },
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, max1363_id);
+
+static struct i2c_driver max1363_driver = {
+ .driver = {
+ .name = "max1363",
+ },
+ .probe = max1363_probe,
+ .remove = max1363_remove,
+ .id_table = max1363_id,
+};
+
+static __init int max1363_init(void)
+{
+ return i2c_add_driver(&max1363_driver);
+}
+
+static __exit void max1363_exit(void)
+{
+ i2c_del_driver(&max1363_driver);
+}
+
+MODULE_AUTHOR("Jonathan Cameron <jic23@cam.ac.uk>");
+MODULE_DESCRIPTION("Maxim 1363 ADC");
+MODULE_LICENSE("GPL v2");
+
+module_init(max1363_init);
+module_exit(max1363_exit);
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff