.name = "Hauppauge WinTV-HVR1270",
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_HAUPPAUGE_HVR1275] = {
+ .name = "Hauppauge WinTV-HVR1275",
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
.subvendor = 0x0070,
.subdevice = 0x2211,
.card = CX23885_BOARD_HAUPPAUGE_HVR1270,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x2215,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1275,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
break;
case CX23885_BOARD_HAUPPAUGE_HVR1270:
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
+ /* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
/* GPIO-6 I2C Gate which can isolate the 3305 from the bus */
/* GPIO-9 LG3305 reset */
/* Put the parts into reset and back */
- cx23885_gpio_enable(dev, GPIO_9 | GPIO_6, 1);
- cx23885_gpio_set(dev, GPIO_9 | GPIO_6);
+ cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1);
+ cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5);
cx23885_gpio_clear(dev, GPIO_9);
mdelay(20);
cx23885_gpio_set(dev, GPIO_9);
case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
/* FIXME: Implement me */
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
default:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */