iio: accel: bma180: Fix BMA25x bandwidth register values

commit 8090d67421ddab0ae932abab5a60200598bf0bbb upstream

According to the BMA253 datasheet [1] and BMA250 datasheet [2] the
bandwidth value for BMA25x should be set as 01xxx:

  "Settings 00xxx result in a bandwidth of 7.81 Hz; [...]
   It is recommended [...] to use the range from ´01000b´ to ´01111b´
   only in order to be compatible with future products."

However, at the moment the drivers sets bandwidth values from 0 to 6,
which is not recommended and always results into 7.81 Hz bandwidth
according to the datasheet.

Fix this by introducing a bw_offset = 8 = 01000b for BMA25x,
so the additional bit is always set for BMA25x.

[1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
[2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Fixes: 2017cff24cc0 ("iio:bma180: Add BMA250 chip support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526094408.34298-2-stephan@gerhold.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index aadc7ee956aa5b5e7f913035dcb1485a02423ba8..02a361de3dcca2def9b85795a0d3d353ade7cf5f 100644 (file)
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -49,7 +49,7 @@ struct bma180_part_info {
 
        u8 int_reset_reg, int_reset_mask;
        u8 sleep_reg, sleep_mask;
-       u8 bw_reg, bw_mask;
+       u8 bw_reg, bw_mask, bw_offset;
        u8 scale_reg, scale_mask;
        u8 power_reg, power_mask, lowpower_val;
        u8 int_enable_reg, int_enable_mask;
@@ -105,6 +105,7 @@ struct bma180_part_info {
 
 #define BMA250_RANGE_MASK      GENMASK(3, 0) /* Range of accel values */
 #define BMA250_BW_MASK         GENMASK(4, 0) /* Accel bandwidth */
+#define BMA250_BW_OFFSET       8
 #define BMA250_SUSPEND_MASK    BIT(7) /* chip will sleep */
 #define BMA250_LOWPOWER_MASK   BIT(6)
 #define BMA250_DATA_INTEN_MASK BIT(4)
@@ -242,7 +243,8 @@ static int bma180_set_bw(struct bma180_data *data, int val)
        for (i = 0; i < data->part_info->num_bw; ++i) {
                if (data->part_info->bw_table[i] == val) {
                        ret = bma180_set_bits(data, data->part_info->bw_reg,
-                               data->part_info->bw_mask, i);
+                               data->part_info->bw_mask,
+                               i + data->part_info->bw_offset);
                        if (ret) {
                                dev_err(&data->client->dev,
                                        "failed to set bandwidth\n");
@@ -661,6 +663,7 @@ static const struct bma180_part_info bma180_part_info[] = {
                .sleep_mask = BMA250_SUSPEND_MASK,
                .bw_reg = BMA250_BW_REG,
                .bw_mask = BMA250_BW_MASK,
+               .bw_offset = BMA250_BW_OFFSET,
                .scale_reg = BMA250_RANGE_REG,
                .scale_mask = BMA250_RANGE_MASK,
                .power_reg = BMA250_POWER_REG,