ifeq ($(CONFIG_OF),y)
-dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
- at91sam9263ek.dtb \
- at91sam9g20ek_2mmc.dtb \
- at91sam9g20ek.dtb \
- at91sam9g25ek.dtb \
- at91sam9m10g45ek.dtb \
- at91sam9n12ek.dtb \
- ethernut5.dtb \
- evk-pro3.dtb \
- kizbox.dtb \
- tny_a9260.dtb \
- tny_a9263.dtb \
- tny_a9g20.dtb \
- usb_a9260.dtb \
- usb_a9263.dtb \
- usb_a9g20.dtb
+# Keep at91 dtb files sorted alphabetically for each SoC
+# rm9200
+dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
+# sam9260
+dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
+dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
+dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
+# sam9263
+dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
+# sam9g20
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
+dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+# sam9g45
+dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
+# sam9n12
+dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
+# sam9x5
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
+
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+ dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-dove-db.dtb
static void exynos4_map_io(void);
static void exynos5_map_io(void);
+ static void exynos5440_map_io(void);
static void exynos4_init_clocks(int xtal);
static void exynos5_init_clocks(int xtal);
-static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5_map_io,
.init_clocks = exynos5_init_clocks,
- .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos5250,
+ }, {
+ .idcode = EXYNOS5440_SOC_ID,
+ .idmask = EXYNOS5_SOC_MASK,
+ .map_io = exynos5440_map_io,
+ .init = exynos_init,
+ .name = name_exynos5440,
},
};
#define EXYNOS5_PA_UART1 0x12C10000
#define EXYNOS5_PA_UART2 0x12C20000
#define EXYNOS5_PA_UART3 0x12C30000
-#define EXYNOS5_SZ_UART SZ_256
+ #define EXYNOS5440_PA_UART0 0x000B0000
+ #define EXYNOS5440_PA_UART1 0x000C0000
+ #define EXYNOS5440_SZ_UART SZ_256
+
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#endif /* __ASM_ARCH_MAP_H */
#include <asm/mach/pci.h>
#include <asm/mach/time.h>
- #include <plat/fpga-irq.h>
-
#include "common.h"
-/*
+/* Base address to the AP system controller */
+void __iomem *ap_syscon_base;
+
+/*
* All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
* is the (PA >> 12).
*
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.reserve = integrator_reserve,
- .map_io = ap_map_io,
+ .map_io = ap_map_io_atag,
- .nr_irqs = NR_IRQS_INTEGRATOR_AP,
.init_early = ap_init_early,
.init_irq = ap_init_irq,
.handle_irq = fpga_handle_irq,
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.reserve = integrator_reserve,
- .map_io = intcp_map_io,
+ .map_io = intcp_map_io_atag,
- .nr_irqs = NR_IRQS_INTEGRATOR_CP,
.init_early = intcp_init_early,
.init_irq = intcp_init_irq,
.handle_irq = fpga_handle_irq,
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
+ #include <linux/random.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
void __init v2m_dt_init_early(void)
{
- struct device_node *node;
u32 dt_hbi;
- node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
- v2m_sysreg_base = of_iomap(node, 0);
- if (WARN_ON(!v2m_sysreg_base))
- return;
+ vexpress_sysreg_of_early_init();
/* Confirm board type against DT property, if available */
- if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
+ if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
- int site = v2m_get_master_site();
- u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ?
- V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
- u32 hbi = id & SYS_PROCIDx_HBI_MASK;
+ u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER);
if (WARN_ON(dt_hbi != hbi))
pr_warning("vexpress: DT HBI (%x) is not matching "
depends on OF && GPIOLIB
select PINCTRL_SAMSUNG
-config PINCTRL_MVEBU
- bool
- depends on ARCH_MVEBU
- select PINMUX
- select PINCONF
-
-config PINCTRL_DOVE
- bool
- select PINCTRL_MVEBU
-
-config PINCTRL_KIRKWOOD
- bool
- select PINCTRL_MVEBU
-
-config PINCTRL_ARMADA_370
- bool
- select PINCTRL_MVEBU
-
-config PINCTRL_ARMADA_XP
- bool
- select PINCTRL_MVEBU
+ config PINCTRL_EXYNOS5440
+ bool "Samsung EXYNOS5440 SoC pinctrl driver"
+ select PINMUX
+ select PINCONF
+
+source "drivers/pinctrl/mvebu/Kconfig"
source "drivers/pinctrl/spear/Kconfig"
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o
-obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o
-obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o
-obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o
-obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
-obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o
+ obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o
obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff