[media] mb86a20s: improve bit error count for BER
authorMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 14 Jan 2013 23:34:55 +0000 (20:34 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Wed, 23 Jan 2013 21:10:42 +0000 (19:10 -0200)
Do a better job on setting the bit error counters, in order to
have all layer measures to happen in a little less than one
second.

Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-frontends/mb86a20s.c

index 354ea664b71353878ac4f5181727bc440022e656..c68e4676e5fd029e193986de9bffd41e3b8d8baa 100644 (file)
@@ -31,6 +31,8 @@ struct mb86a20s_state {
 
        struct dvb_frontend frontend;
 
+       u32 estimated_rate[3];
+
        bool need_init;
 };
 
@@ -39,6 +41,8 @@ struct regdata {
        u8 data;
 };
 
+#define BER_SAMPLING_RATE      1       /* Seconds */
+
 /*
  * Initialization sequence: Use whatevere default values that PV SBTVD
  * does on its initialisation, obtained via USB snoop
@@ -87,7 +91,7 @@ static struct regdata mb86a20s_init[] = {
         * it collects the bit error count. The bit counters are initialized
         * to 65535 here. This warrants that all of them will be quickly
         * calculated when device gets locked. As TMCC is parsed, the values
-        * can be adjusted later in the driver's code.
+        * will be adjusted later in the driver's code.
         */
        { 0x52, 0x01 },                         /* Turn on BER before Viterbi */
        { 0x50, 0xa7 }, { 0x51, 0x00 },
@@ -485,6 +489,113 @@ static void mb86a20s_reset_frontend_cache(struct dvb_frontend *fe)
        c->isdbt_sb_segment_count = 0;
 }
 
+/*
+ * Estimates the bit rate using the per-segment bit rate given by
+ * ABNT/NBR 15601 spec (table 4).
+ */
+static u32 isdbt_rate[3][5][4] = {
+       {       /* DQPSK/QPSK */
+               {  280850,  312060,  330420,  340430 }, /* 1/2 */
+               {  374470,  416080,  440560,  453910 }, /* 2/3 */
+               {  421280,  468090,  495630,  510650 }, /* 3/4 */
+               {  468090,  520100,  550700,  567390 }, /* 5/6 */
+               {  491500,  546110,  578230,  595760 }, /* 7/8 */
+       }, {    /* QAM16 */
+               {  561710,  624130,  660840,  680870 }, /* 1/2 */
+               {  748950,  832170,  881120,  907820 }, /* 2/3 */
+               {  842570,  936190,  991260, 1021300 }, /* 3/4 */
+               {  936190, 1040210, 1101400, 1134780 }, /* 5/6 */
+               {  983000, 1092220, 1156470, 1191520 }, /* 7/8 */
+       }, {    /* QAM64 */
+               {  842570,  936190,  991260, 1021300 }, /* 1/2 */
+               { 1123430, 1248260, 1321680, 1361740 }, /* 2/3 */
+               { 1263860, 1404290, 1486900, 1531950 }, /* 3/4 */
+               { 1404290, 1560320, 1652110, 1702170 }, /* 5/6 */
+               { 1474500, 1638340, 1734710, 1787280 }, /* 7/8 */
+       }
+};
+
+static void mb86a20s_layer_bitrate(struct dvb_frontend *fe, u32 layer,
+                                  u32 modulation, u32 fec, u32 interleaving,
+                                  u32 segment)
+{
+       struct mb86a20s_state *state = fe->demodulator_priv;
+       u32 rate;
+       int m, f, i;
+
+       /*
+        * If modulation/fec/interleaving is not detected, the default is
+        * to consider the lowest bit rate, to avoid taking too long time
+        * to get BER.
+        */
+       switch (modulation) {
+       case DQPSK:
+       case QPSK:
+       default:
+               m = 0;
+               break;
+       case QAM_16:
+               m = 1;
+               break;
+       case QAM_64:
+               m = 2;
+               break;
+       }
+
+       switch (fec) {
+       default:
+       case FEC_1_2:
+       case FEC_AUTO:
+               f = 0;
+               break;
+       case FEC_2_3:
+               f = 1;
+               break;
+       case FEC_3_4:
+               f = 2;
+               break;
+       case FEC_5_6:
+               f = 3;
+               break;
+       case FEC_7_8:
+               f = 4;
+               break;
+       }
+
+       switch (interleaving) {
+       default:
+       case GUARD_INTERVAL_1_4:
+               i = 0;
+               break;
+       case GUARD_INTERVAL_1_8:
+               i = 1;
+               break;
+       case GUARD_INTERVAL_1_16:
+               i = 2;
+               break;
+       case GUARD_INTERVAL_1_32:
+               i = 3;
+               break;
+       }
+
+       /* Samples BER at BER_SAMPLING_RATE seconds */
+       rate = isdbt_rate[m][f][i] * segment * BER_SAMPLING_RATE;
+
+       /* Avoids sampling too quickly or to overflow the register */
+       if (rate < 256)
+               rate = 256;
+       else if (rate > (1 << 24) - 1)
+               rate = (1 << 24) - 1;
+
+       dev_dbg(&state->i2c->dev,
+               "%s: layer %c bitrate: %d kbps; counter = %d (0x%06x)\n",
+              __func__, 'A' + layer, segment * isdbt_rate[m][f][i]/1000,
+               rate, rate);
+
+       state->estimated_rate[i] = rate;
+}
+
+
 static int mb86a20s_get_frontend(struct dvb_frontend *fe)
 {
        struct mb86a20s_state *state = fe->demodulator_priv;
@@ -514,10 +625,11 @@ static int mb86a20s_get_frontend(struct dvb_frontend *fe)
                rc = mb86a20s_get_segment_count(state, i);
                if (rc < 0)
                        goto noperlayer_error;
-               if (rc >= 0 && rc < 14)
+               if (rc >= 0 && rc < 14) {
                        c->layer[i].segment_count = rc;
-               else {
+               else {
                        c->layer[i].segment_count = 0;
+                       state->estimated_rate[i] = 0;
                        continue;
                }
                c->isdbt_layer_enabled |= 1 << i;
@@ -539,6 +651,10 @@ static int mb86a20s_get_frontend(struct dvb_frontend *fe)
                dev_dbg(&state->i2c->dev, "%s: interleaving %d.\n",
                        __func__, rc);
                c->layer[i].interleaving = rc;
+               mb86a20s_layer_bitrate(fe, i, c->layer[i].modulation,
+                                      c->layer[i].fec,
+                                      c->layer[i].interleaving,
+                                      c->layer[i].segment_count);
        }
 
        rc = mb86a20s_writereg(state, 0x6d, 0x84);
@@ -730,6 +846,42 @@ static int mb86a20s_get_ber_before_vterbi(struct dvb_frontend *fe,
                __func__, 'A' + layer, *count);
 
 
+       /*
+        * As we get TMCC data from the frontend, we can better estimate the
+        * BER bit counters, in order to do the BER measure during a longer
+        * time. Use those data, if available, to update the bit count
+        * measure.
+        */
+
+       if (state->estimated_rate[layer]
+           && state->estimated_rate[layer] != *count) {
+               dev_dbg(&state->i2c->dev,
+                       "%s: updating layer %c counter to %d.\n",
+                       __func__, 'A' + layer, state->estimated_rate[layer]);
+               rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3);
+               if (rc < 0)
+                       return rc;
+               rc = mb86a20s_writereg(state, 0x51,
+                                      state->estimated_rate[layer] >> 16);
+               if (rc < 0)
+                       return rc;
+               rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3);
+               if (rc < 0)
+                       return rc;
+               rc = mb86a20s_writereg(state, 0x51,
+                                      state->estimated_rate[layer] >> 8);
+               if (rc < 0)
+                       return rc;
+               rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3);
+               if (rc < 0)
+                       return rc;
+               rc = mb86a20s_writereg(state, 0x51,
+                                      state->estimated_rate[layer]);
+               if (rc < 0)
+                       return rc;
+       }
+
+
        /* Reset counter to collect new data */
        rc = mb86a20s_writereg(state, 0x53, 0x07 & ~(1 << layer));
        if (rc < 0)
@@ -922,8 +1074,10 @@ static int mb86a20s_set_frontend(struct dvb_frontend *fe)
 
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 0);
+
        rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
        mb86a20s_reset_counters(fe);
+
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);