stmmac: move hw init in the probe (v2)
authorGiuseppe CAVALLARO <peppe.cavallaro@st.com>
Wed, 15 Feb 2012 00:10:39 +0000 (00:10 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 15 Feb 2012 19:52:10 +0000 (14:52 -0500)
This patch moves the MAC HW initialization and
the HW feature verification from the open to the probe
function as D. Miller suggested.
So the patch actually reorganizes and tidies-up some parts of
the driver and indeed fixes some problem when tune its HW features.
These can be overwritten by looking at the HW cap register at
run-time and that generated problems.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/stmicro/stmmac/stmmac.h
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c

index 120740020e2ca4c68d304629bf5652dd7913ff0b..6ca2aa3cc43bfc97f513341af2f6506306ad388b 100644 (file)
@@ -97,4 +97,5 @@ int stmmac_resume(struct net_device *ndev);
 int stmmac_suspend(struct net_device *ndev);
 int stmmac_dvr_remove(struct net_device *ndev);
 struct stmmac_priv *stmmac_dvr_probe(struct device *device,
-                               struct plat_stmmacenet_data *plat_dat);
+                                    struct plat_stmmacenet_data *plat_dat,
+                                    void __iomem *addr);
index 970a3f415244f88076de15c51ec5ba7338401efc..6ee593a55a64d9eabbf3238bfba28102257b8cc5 100644 (file)
@@ -241,7 +241,7 @@ static void stmmac_adjust_link(struct net_device *dev)
                        case 1000:
                                if (likely(priv->plat->has_gmac))
                                        ctrl &= ~priv->hw->link.port;
-                               stmmac_hw_fix_mac_speed(priv);
+                                       stmmac_hw_fix_mac_speed(priv);
                                break;
                        case 100:
                        case 10:
@@ -785,7 +785,7 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
                u32 uid = ((hwid & 0x0000ff00) >> 8);
                u32 synid = (hwid & 0x000000ff);
 
-               pr_info("STMMAC - user ID: 0x%x, Synopsys ID: 0x%x\n",
+               pr_info("stmmac - user ID: 0x%x, Synopsys ID: 0x%x\n",
                        uid, synid);
 
                return synid;
@@ -869,38 +869,6 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv)
        return hw_cap;
 }
 
-/**
- * stmmac_mac_device_setup
- * @dev : device pointer
- * Description: this is to attach the GMAC or MAC 10/100
- * main core structures that will be completed during the
- * open step.
- */
-static int stmmac_mac_device_setup(struct net_device *dev)
-{
-       struct stmmac_priv *priv = netdev_priv(dev);
-
-       struct mac_device_info *device;
-
-       if (priv->plat->has_gmac)
-               device = dwmac1000_setup(priv->ioaddr);
-       else
-               device = dwmac100_setup(priv->ioaddr);
-
-       if (!device)
-               return -ENOMEM;
-
-       priv->hw = device;
-       priv->hw->ring = &ring_mode_ops;
-
-       if (device_can_wakeup(priv->device)) {
-               priv->wolopts = WAKE_MAGIC; /* Magic Frame as default */
-               enable_irq_wake(priv->wol_irq);
-       }
-
-       return 0;
-}
-
 static void stmmac_check_ether_addr(struct stmmac_priv *priv)
 {
        /* verify if the MAC address is valid, in case of failures it
@@ -930,20 +898,8 @@ static int stmmac_open(struct net_device *dev)
        struct stmmac_priv *priv = netdev_priv(dev);
        int ret;
 
-       /* MAC HW device setup */
-       ret = stmmac_mac_device_setup(dev);
-       if (ret < 0)
-               return ret;
-
        stmmac_check_ether_addr(priv);
 
-       stmmac_verify_args();
-
-       /* Override with kernel parameters if supplied XXX CRS XXX
-        * this needs to have multiple instances */
-       if ((phyaddr >= 0) && (phyaddr <= 31))
-               priv->plat->phy_addr = phyaddr;
-
        /* MDIO bus Registration */
        ret = stmmac_mdio_register(dev);
        if (ret < 0) {
@@ -976,44 +932,6 @@ static int stmmac_open(struct net_device *dev)
                goto open_error;
        }
 
-       stmmac_get_synopsys_id(priv);
-
-       priv->hw_cap_support = stmmac_get_hw_features(priv);
-
-       if (priv->hw_cap_support) {
-               pr_info(" Support DMA HW capability register");
-
-               /* We can override some gmac/dma configuration fields: e.g.
-                * enh_desc, tx_coe (e.g. that are passed through the
-                * platform) with the values from the HW capability
-                * register (if supported).
-                */
-               priv->plat->enh_desc = priv->dma_cap.enh_desc;
-               priv->plat->tx_coe = priv->dma_cap.tx_coe;
-               priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
-
-               /* By default disable wol on magic frame if not supported */
-               if (!priv->dma_cap.pmt_magic_frame)
-                       priv->wolopts &= ~WAKE_MAGIC;
-
-       } else
-               pr_info(" No HW DMA feature register supported");
-
-       /* Select the enhnaced/normal descriptor structures */
-       stmmac_selec_desc_mode(priv);
-
-       /* PMT module is not integrated in all the MAC devices. */
-       if (priv->plat->pmt) {
-               pr_info(" Remote wake-up capable\n");
-               device_set_wakeup_capable(priv->device, 1);
-       }
-
-       priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
-       if (priv->rx_coe)
-               pr_info(" Checksum Offload Engine supported\n");
-       if (priv->plat->tx_coe)
-               pr_info(" Checksum insertion supported\n");
-
        /* Create and initialize the TX/RX descriptors chains. */
        priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
        priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
@@ -1030,14 +948,14 @@ static int stmmac_open(struct net_device *dev)
 
        /* Copy the MAC addr into the HW  */
        priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
+
        /* If required, perform hw setup of the bus. */
        if (priv->plat->bus_setup)
                priv->plat->bus_setup(priv->ioaddr);
+
        /* Initialize the MAC Core */
        priv->hw->mac->core_init(priv->ioaddr);
 
-       netdev_update_features(dev);
-
        /* Request the IRQ lines */
        ret = request_irq(dev->irq, stmmac_interrupt,
                         IRQF_SHARED, dev->name, dev);
@@ -1073,7 +991,7 @@ static int stmmac_open(struct net_device *dev)
 #ifdef CONFIG_STMMAC_DEBUG_FS
        ret = stmmac_init_fs(dev);
        if (ret < 0)
-               pr_warning("\tFailed debugFS registration");
+               pr_warning("%s: failed debugFS registration\n", __func__);
 #endif
        /* Start the ball rolling... */
        DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
@@ -1083,6 +1001,7 @@ static int stmmac_open(struct net_device *dev)
 #ifdef CONFIG_STMMAC_TIMER
        priv->tm->timer_start(tmrate);
 #endif
+
        /* Dump DMA/MAC registers */
        if (netif_msg_hw(priv)) {
                priv->hw->mac->dump_regs(priv->ioaddr);
@@ -1804,6 +1723,69 @@ static const struct net_device_ops stmmac_netdev_ops = {
        .ndo_set_mac_address = eth_mac_addr,
 };
 
+/**
+ *  stmmac_hw_init - Init the MAC device
+ *  @priv : pointer to the private device structure.
+ *  Description: this function detects which MAC device
+ *  (GMAC/MAC10-100) has to attached, checks the HW capability
+ *  (if supported) and sets the driver's features (for example
+ *  to use the ring or chaine mode or support the normal/enh
+ *  descriptor structure).
+ */
+static int stmmac_hw_init(struct stmmac_priv *priv)
+{
+       int ret = 0;
+       struct mac_device_info *mac;
+
+       /* Identify the MAC HW device */
+       if (priv->plat->has_gmac)
+               mac = dwmac1000_setup(priv->ioaddr);
+       else
+               mac = dwmac100_setup(priv->ioaddr);
+       if (!mac)
+               return -ENOMEM;
+
+       priv->hw = mac;
+
+       /* To use the chained or ring mode */
+       priv->hw->ring = &ring_mode_ops;
+
+       /* Get and dump the chip ID */
+       stmmac_get_synopsys_id(priv);
+
+       /* Get the HW capability (new GMAC newer than 3.50a) */
+       priv->hw_cap_support = stmmac_get_hw_features(priv);
+       if (priv->hw_cap_support) {
+               pr_info(" DMA HW capability register supported");
+
+               /* We can override some gmac/dma configuration fields: e.g.
+                * enh_desc, tx_coe (e.g. that are passed through the
+                * platform) with the values from the HW capability
+                * register (if supported).
+                */
+               priv->plat->enh_desc = priv->dma_cap.enh_desc;
+               priv->plat->tx_coe = priv->dma_cap.tx_coe;
+               priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
+       } else
+               pr_info(" No HW DMA feature register supported");
+
+       /* Select the enhnaced/normal descriptor structures */
+       stmmac_selec_desc_mode(priv);
+
+       priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+       if (priv->rx_coe)
+               pr_info(" RX Checksum Offload Engine supported\n");
+       if (priv->plat->tx_coe)
+               pr_info(" TX Checksum insertion supported\n");
+
+       if (priv->plat->pmt) {
+               pr_info(" Wake-Up On Lan supported\n");
+               device_set_wakeup_capable(priv->device, 1);
+       }
+
+       return ret;
+}
+
 /**
  * stmmac_dvr_probe
  * @device: device pointer
@@ -1811,7 +1793,8 @@ static const struct net_device_ops stmmac_netdev_ops = {
  * call the alloc_etherdev, allocate the priv structure.
  */
 struct stmmac_priv *stmmac_dvr_probe(struct device *device,
-                                       struct plat_stmmacenet_data *plat_dat)
+                                    struct plat_stmmacenet_data *plat_dat,
+                                    void __iomem *addr)
 {
        int ret = 0;
        struct net_device *ndev = NULL;
@@ -1831,10 +1814,27 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 
        ether_setup(ndev);
 
-       ndev->netdev_ops = &stmmac_netdev_ops;
        stmmac_set_ethtool_ops(ndev);
+       priv->pause = pause;
+       priv->plat = plat_dat;
+       priv->ioaddr = addr;
+       priv->dev->base_addr = (unsigned long)addr;
+
+       /* Verify driver arguments */
+       stmmac_verify_args();
 
-       ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+       /* Override with kernel parameters if supplied XXX CRS XXX
+        * this needs to have multiple instances */
+       if ((phyaddr >= 0) && (phyaddr <= 31))
+               priv->plat->phy_addr = phyaddr;
+
+       /* Init MAC and get the capabilities */
+       stmmac_hw_init(priv);
+
+       ndev->netdev_ops = &stmmac_netdev_ops;
+
+       ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+                           NETIF_F_RXCSUM;
        ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
        ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
 #ifdef STMMAC_VLAN_TAG_USED
@@ -1846,8 +1846,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
        if (flow_ctrl)
                priv->flow_ctrl = FLOW_AUTO;    /* RX/TX pause on */
 
-       priv->pause = pause;
-       priv->plat = plat_dat;
        netif_napi_add(ndev, &priv->napi, stmmac_poll, 64);
 
        spin_lock_init(&priv->lock);
@@ -1855,15 +1853,10 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 
        ret = register_netdev(ndev);
        if (ret) {
-               pr_err("%s: ERROR %i registering the device\n",
-                      __func__, ret);
+               pr_err("%s: ERROR %i registering the device\n", __func__, ret);
                goto error;
        }
 
-       DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
-           ndev->name, (ndev->features & NETIF_F_SG) ? "on" : "off",
-           (ndev->features & NETIF_F_IP_CSUM) ? "on" : "off");
-
        return priv;
 
 error:
index c796de9eed7226886ec67b453181c20fb129f111..50ad5b80cfaf1885ae71c148543e5cf2c4f1ae36 100644 (file)
@@ -96,13 +96,11 @@ static int __devinit stmmac_pci_probe(struct pci_dev *pdev,
 
        stmmac_default_data();
 
-       priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat);
+       priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr);
        if (!priv) {
-               pr_err("%s: main drivr probe failed", __func__);
+               pr_err("%s: main driver probe failed", __func__);
                goto err_out;
        }
-       priv->ioaddr = addr;
-       priv->dev->base_addr = (unsigned long)addr;
        priv->dev->irq = pdev->irq;
        priv->wol_irq = pdev->irq;
 
index 1ac83243649a2d4c44ad4efa7fd0393c6869fbce..3aad9810237c0dedb8c23f39324f2db646009f1a 100644 (file)
@@ -59,16 +59,20 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
                goto out_release_region;
        }
        plat_dat = pdev->dev.platform_data;
-       priv = stmmac_dvr_probe(&(pdev->dev), plat_dat);
+
+       /* Custom initialisation (if needed)*/
+       if (plat_dat->init) {
+               ret = plat_dat->init(pdev);
+               if (unlikely(ret))
+                       goto out_unmap;
+       }
+
+       priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
        if (!priv) {
-               pr_err("%s: main drivr probe failed", __func__);
+               pr_err("%s: main driver probe failed", __func__);
                goto out_unmap;
        }
 
-       priv->ioaddr = addr;
-       /* Set the I/O base addr */
-       priv->dev->base_addr = (unsigned long)addr;
-
        /* Get the MAC information */
        priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
        if (priv->dev->irq == -ENXIO) {
@@ -92,13 +96,6 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
 
        platform_set_drvdata(pdev, priv->dev);
 
-       /* Custom initialisation */
-       if (priv->plat->init) {
-               ret = priv->plat->init(pdev);
-               if (unlikely(ret))
-                       goto out_unmap;
-       }
-
        pr_debug("STMMAC platform driver registration completed");
 
        return 0;