* stopped in ath10k_core_restart() work holding conf_mutex. The state
* RESTARTED means that the device is up and mac80211 has started hw
* reconfiguration. Once mac80211 is done with the reconfiguration we
- * set the state to STATE_ON in restart_complete(). */
+ * set the state to STATE_ON in reconfig_complete(). */
ATH10K_STATE_RESTARTING,
ATH10K_STATE_RESTARTED,
}
#endif
-static void ath10k_restart_complete(struct ieee80211_hw *hw)
+static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
+ enum ieee80211_reconfig_type reconfig_type)
{
struct ath10k *ar = hw->priv;
+ if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
+ return;
+
mutex_lock(&ar->conf_mutex);
/* If device failed to restart it will be in a different state, e.g.
.tx_last_beacon = ath10k_tx_last_beacon,
.set_antenna = ath10k_set_antenna,
.get_antenna = ath10k_get_antenna,
- .restart_complete = ath10k_restart_complete,
+ .reconfig_complete = ath10k_reconfig_complete,
.get_survey = ath10k_get_survey,
.set_bitrate_mask = ath10k_set_bitrate_mask,
.sta_rc_update = ath10k_sta_rc_update,
return ret;
}
-static void iwl_mvm_mac_restart_complete(struct ieee80211_hw *hw)
+static void iwl_mvm_restart_complete(struct iwl_mvm *mvm)
{
- struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
int ret;
mutex_lock(&mvm->mutex);
mutex_unlock(&mvm->mutex);
}
+static void
+iwl_mvm_mac_reconfig_complete(struct ieee80211_hw *hw,
+ enum ieee80211_reconfig_type reconfig_type)
+{
+ struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+
+ switch (reconfig_type) {
+ case IEEE80211_RECONFIG_TYPE_RESTART:
+ iwl_mvm_restart_complete(mvm);
+ break;
+ case IEEE80211_RECONFIG_TYPE_SUSPEND:
+ break;
+ }
+}
+
void __iwl_mvm_mac_stop(struct iwl_mvm *mvm)
{
lockdep_assert_held(&mvm->mutex);
.tx = iwl_mvm_mac_tx,
.ampdu_action = iwl_mvm_mac_ampdu_action,
.start = iwl_mvm_mac_start,
- .restart_complete = iwl_mvm_mac_restart_complete,
+ .reconfig_complete = iwl_mvm_mac_reconfig_complete,
.stop = iwl_mvm_mac_stop,
.add_interface = iwl_mvm_mac_add_interface,
.remove_interface = iwl_mvm_mac_remove_interface,
IEEE80211_ROC_TYPE_MGMT_TX,
};
+/**
+ * enum ieee80211_reconfig_complete_type - reconfig type
+ *
+ * This enum is used by the reconfig_complete() callback to indicate what
+ * reconfiguration type was completed.
+ *
+ * @IEEE80211_RECONFIG_TYPE_RESTART: hw restart type
+ * (also due to resume() callback returning 1)
+ * @IEEE80211_RECONFIG_TYPE_SUSPEND: suspend type (regardless
+ * of wowlan configuration)
+ */
+enum ieee80211_reconfig_type {
+ IEEE80211_RECONFIG_TYPE_RESTART,
+ IEEE80211_RECONFIG_TYPE_SUSPEND,
+};
+
/**
* struct ieee80211_ops - callbacks from mac80211 to the driver
*
* disabled/enabled via @bss_info_changed.
* @stop_ap: Stop operation on the AP interface.
*
- * @restart_complete: Called after a call to ieee80211_restart_hw(), when the
- * reconfiguration has completed. This can help the driver implement the
- * reconfiguration step. Also called when reconfiguring because the
- * driver's resume function returned 1, as this is just like an "inline"
- * hardware restart. This callback may sleep.
+ * @reconfig_complete: Called after a call to ieee80211_restart_hw() and
+ * during resume, when the reconfiguration has completed.
+ * This can help the driver implement the reconfiguration step (and
+ * indicate mac80211 is ready to receive frames).
+ * This callback may sleep.
*
* @ipv6_addr_change: IPv6 address assignment on the given interface changed.
* Currently, this is only called for managed or P2P client interfaces.
int n_vifs,
enum ieee80211_chanctx_switch_mode mode);
- void (*restart_complete)(struct ieee80211_hw *hw);
+ void (*reconfig_complete)(struct ieee80211_hw *hw,
+ enum ieee80211_reconfig_type reconfig_type);
#if IS_ENABLED(CONFIG_IPV6)
void (*ipv6_addr_change)(struct ieee80211_hw *hw,
trace_drv_return_void(local);
}
-static inline void drv_restart_complete(struct ieee80211_local *local)
+static inline void
+drv_reconfig_complete(struct ieee80211_local *local,
+ enum ieee80211_reconfig_type reconfig_type)
{
might_sleep();
- trace_drv_restart_complete(local);
- if (local->ops->restart_complete)
- local->ops->restart_complete(&local->hw);
+ trace_drv_reconfig_complete(local, reconfig_type);
+ if (local->ops->reconfig_complete)
+ local->ops->reconfig_complete(&local->hw, reconfig_type);
trace_drv_return_void(local);
}
TP_ARGS(local, sdata)
);
-DEFINE_EVENT(local_only_evt, drv_restart_complete,
- TP_PROTO(struct ieee80211_local *local),
- TP_ARGS(local)
+TRACE_EVENT(drv_reconfig_complete,
+ TP_PROTO(struct ieee80211_local *local,
+ enum ieee80211_reconfig_type reconfig_type),
+ TP_ARGS(local, reconfig_type),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(u8, reconfig_type)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->reconfig_type = reconfig_type;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " reconfig_type:%d",
+ LOCAL_PR_ARG, __entry->reconfig_type
+ )
+
);
#if IS_ENABLED(CONFIG_IPV6)
* We may want to change that later, however.
*/
if (!local->suspended || reconfig_due_to_wowlan)
- drv_restart_complete(local);
+ drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_RESTART);
if (!local->suspended)
return 0;
mb();
local->resuming = false;
+ if (!reconfig_due_to_wowlan)
+ drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_SUSPEND);
+
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;