of_node_put(chip->mdio_np);
}
-#ifdef CONFIG_NET_DSA_HWMON
-
-static int mv88e61xx_get_temp(struct dsa_switch *ds, int *temp)
-{
- struct mv88e6xxx_chip *chip = ds->priv;
- u16 val;
- int ret;
-
- *temp = 0;
-
- mutex_lock(&chip->reg_lock);
-
- ret = mv88e6xxx_phy_write(chip, 0x0, 0x16, 0x6);
- if (ret < 0)
- goto error;
-
- /* Enable temperature sensor */
- ret = mv88e6xxx_phy_read(chip, 0x0, 0x1a, &val);
- if (ret < 0)
- goto error;
-
- ret = mv88e6xxx_phy_write(chip, 0x0, 0x1a, val | (1 << 5));
- if (ret < 0)
- goto error;
-
- /* Wait for temperature to stabilize */
- usleep_range(10000, 12000);
-
- ret = mv88e6xxx_phy_read(chip, 0x0, 0x1a, &val);
- if (ret < 0)
- goto error;
-
- /* Disable temperature sensor */
- ret = mv88e6xxx_phy_write(chip, 0x0, 0x1a, val & ~(1 << 5));
- if (ret < 0)
- goto error;
-
- *temp = ((val & 0x1f) - 5) * 5;
-
-error:
- mv88e6xxx_phy_write(chip, 0x0, 0x16, 0x0);
- mutex_unlock(&chip->reg_lock);
- return ret;
-}
-
-static int mv88e63xx_get_temp(struct dsa_switch *ds, int *temp)
-{
- struct mv88e6xxx_chip *chip = ds->priv;
- int phy = mv88e6xxx_6320_family(chip) ? 3 : 0;
- u16 val;
- int ret;
-
- *temp = 0;
-
- mutex_lock(&chip->reg_lock);
- ret = mv88e6xxx_phy_page_read(chip, phy, 6, 27, &val);
- mutex_unlock(&chip->reg_lock);
- if (ret < 0)
- return ret;
-
- *temp = (val & 0xff) - 25;
-
- return 0;
-}
-
-static int mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp)
-{
- struct mv88e6xxx_chip *chip = ds->priv;
-
- if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_TEMP))
- return -EOPNOTSUPP;
-
- if (mv88e6xxx_6320_family(chip) || mv88e6xxx_6352_family(chip))
- return mv88e63xx_get_temp(ds, temp);
-
- return mv88e61xx_get_temp(ds, temp);
-}
-
-static int mv88e6xxx_get_temp_limit(struct dsa_switch *ds, int *temp)
-{
- struct mv88e6xxx_chip *chip = ds->priv;
- int phy = mv88e6xxx_6320_family(chip) ? 3 : 0;
- u16 val;
- int ret;
-
- if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_TEMP_LIMIT))
- return -EOPNOTSUPP;
-
- *temp = 0;
-
- mutex_lock(&chip->reg_lock);
- ret = mv88e6xxx_phy_page_read(chip, phy, 6, 26, &val);
- mutex_unlock(&chip->reg_lock);
- if (ret < 0)
- return ret;
-
- *temp = (((val >> 8) & 0x1f) * 5) - 25;
-
- return 0;
-}
-
-static int mv88e6xxx_set_temp_limit(struct dsa_switch *ds, int temp)
-{
- struct mv88e6xxx_chip *chip = ds->priv;
- int phy = mv88e6xxx_6320_family(chip) ? 3 : 0;
- u16 val;
- int err;
-
- if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_TEMP_LIMIT))
- return -EOPNOTSUPP;
-
- mutex_lock(&chip->reg_lock);
- err = mv88e6xxx_phy_page_read(chip, phy, 6, 26, &val);
- if (err)
- goto unlock;
- temp = clamp_val(DIV_ROUND_CLOSEST(temp, 5) + 5, 0, 0x1f);
- err = mv88e6xxx_phy_page_write(chip, phy, 6, 26,
- (val & 0xe0ff) | (temp << 8));
-unlock:
- mutex_unlock(&chip->reg_lock);
-
- return err;
-}
-
-static int mv88e6xxx_get_temp_alarm(struct dsa_switch *ds, bool *alarm)
-{
- struct mv88e6xxx_chip *chip = ds->priv;
- int phy = mv88e6xxx_6320_family(chip) ? 3 : 0;
- u16 val;
- int ret;
-
- if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_TEMP_LIMIT))
- return -EOPNOTSUPP;
-
- *alarm = false;
-
- mutex_lock(&chip->reg_lock);
- ret = mv88e6xxx_phy_page_read(chip, phy, 6, 26, &val);
- mutex_unlock(&chip->reg_lock);
- if (ret < 0)
- return ret;
-
- *alarm = !!(val & 0x40);
-
- return 0;
-}
-#endif /* CONFIG_NET_DSA_HWMON */
-
static int mv88e6xxx_get_eeprom_len(struct dsa_switch *ds)
{
struct mv88e6xxx_chip *chip = ds->priv;
.get_sset_count = mv88e6xxx_get_sset_count,
.set_eee = mv88e6xxx_set_eee,
.get_eee = mv88e6xxx_get_eee,
-#ifdef CONFIG_NET_DSA_HWMON
- .get_temp = mv88e6xxx_get_temp,
- .get_temp_limit = mv88e6xxx_get_temp_limit,
- .set_temp_limit = mv88e6xxx_set_temp_limit,
- .get_temp_alarm = mv88e6xxx_get_temp_alarm,
-#endif
.get_eeprom_len = mv88e6xxx_get_eeprom_len,
.get_eeprom = mv88e6xxx_get_eeprom,
.set_eeprom = mv88e6xxx_set_eeprom,
*/
MV88E6XXX_CAP_STU,
- /* Internal temperature sensor.
- * Available from any enabled port's PHY register 26, page 6.
- */
- MV88E6XXX_CAP_TEMP,
- MV88E6XXX_CAP_TEMP_LIMIT,
-
/* VLAN Table Unit.
* The VTU is used to program 802.1Q VLANs. See GLOBAL_VTU_OP.
*/
#define MV88E6XXX_FLAG_G2_POT BIT_ULL(MV88E6XXX_CAP_G2_POT)
#define MV88E6XXX_FLAG_STU BIT_ULL(MV88E6XXX_CAP_STU)
-#define MV88E6XXX_FLAG_TEMP BIT_ULL(MV88E6XXX_CAP_TEMP)
-#define MV88E6XXX_FLAG_TEMP_LIMIT BIT_ULL(MV88E6XXX_CAP_TEMP_LIMIT)
#define MV88E6XXX_FLAG_VTU BIT_ULL(MV88E6XXX_CAP_VTU)
/* Ingress Rate Limit unit */
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_TEMP | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
- MV88E6XXX_FLAG_TEMP | \
- MV88E6XXX_FLAG_TEMP_LIMIT | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_TEMP | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_TEMP | \
- MV88E6XXX_FLAG_TEMP_LIMIT | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
(MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_TEMP | \
- MV88E6XXX_FLAG_TEMP_LIMIT | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
int (*get_eee)(struct dsa_switch *ds, int port,
struct ethtool_eee *e);
-#ifdef CONFIG_NET_DSA_HWMON
- /* Hardware monitoring */
- int (*get_temp)(struct dsa_switch *ds, int *temp);
- int (*get_temp_limit)(struct dsa_switch *ds, int *temp);
- int (*set_temp_limit)(struct dsa_switch *ds, int temp);
- int (*get_temp_alarm)(struct dsa_switch *ds, bool *alarm);
-#endif
-
/* EEPROM access */
int (*get_eeprom_len)(struct dsa_switch *ds);
int (*get_eeprom)(struct dsa_switch *ds,
if NET_DSA
-config NET_DSA_HWMON
- bool "Distributed Switch Architecture HWMON support"
- default y
- depends on HWMON && !(NET_DSA=y && HWMON=m)
- ---help---
- Say Y if you want to expose thermal sensor data on switches supported
- by the Distributed Switch Architecture.
-
- Some of those switches contain thermal sensors. This data is available
- via the hwmon sysfs interface and exposes the onboard sensors.
-
# tagging formats
config NET_DSA_TAG_BRCM
bool
# the core
obj-$(CONFIG_NET_DSA) += dsa_core.o
dsa_core-y += dsa.o slave.o dsa2.o
-dsa_core-$(CONFIG_NET_DSA_HWMON) += hwmon.o
# tagging formats
dsa_core-$(CONFIG_NET_DSA_TAG_BRCM) += tag_brcm.o
if (ret)
return ret;
- dsa_hwmon_register(ds);
-
return 0;
}
{
int port;
- dsa_hwmon_unregister(ds);
-
/* Destroy network devices for physical switch ports. */
for (port = 0; port < DSA_MAX_PORTS; port++) {
if (!(ds->enabled_port_mask & (1 << port)))
int dsa_cpu_port_ethtool_setup(struct dsa_switch *ds);
void dsa_cpu_port_ethtool_restore(struct dsa_switch *ds);
-/* hwmon.c */
-#ifdef CONFIG_NET_DSA_HWMON
-void dsa_hwmon_register(struct dsa_switch *ds);
-void dsa_hwmon_unregister(struct dsa_switch *ds);
-#else
-static inline void dsa_hwmon_register(struct dsa_switch *ds) { }
-static inline void dsa_hwmon_unregister(struct dsa_switch *ds) { }
-#endif
-
/* slave.c */
extern const struct dsa_device_ops notag_netdev_ops;
void dsa_slave_mii_bus_init(struct dsa_switch *ds);
+++ /dev/null
-/*
- * net/dsa/hwmon.c - HWMON subsystem support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/ctype.h>
-#include <linux/hwmon.h>
-#include <net/dsa.h>
-
-#include "dsa_priv.h"
-
-static ssize_t temp1_input_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct dsa_switch *ds = dev_get_drvdata(dev);
- int temp, ret;
-
- ret = ds->ops->get_temp(ds, &temp);
- if (ret < 0)
- return ret;
-
- return sprintf(buf, "%d\n", temp * 1000);
-}
-static DEVICE_ATTR_RO(temp1_input);
-
-static ssize_t temp1_max_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct dsa_switch *ds = dev_get_drvdata(dev);
- int temp, ret;
-
- ret = ds->ops->get_temp_limit(ds, &temp);
- if (ret < 0)
- return ret;
-
- return sprintf(buf, "%d\n", temp * 1000);
-}
-
-static ssize_t temp1_max_store(struct device *dev,
- struct device_attribute *attr, const char *buf,
- size_t count)
-{
- struct dsa_switch *ds = dev_get_drvdata(dev);
- int temp, ret;
-
- ret = kstrtoint(buf, 0, &temp);
- if (ret < 0)
- return ret;
-
- ret = ds->ops->set_temp_limit(ds, DIV_ROUND_CLOSEST(temp, 1000));
- if (ret < 0)
- return ret;
-
- return count;
-}
-static DEVICE_ATTR_RW(temp1_max);
-
-static ssize_t temp1_max_alarm_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct dsa_switch *ds = dev_get_drvdata(dev);
- bool alarm;
- int ret;
-
- ret = ds->ops->get_temp_alarm(ds, &alarm);
- if (ret < 0)
- return ret;
-
- return sprintf(buf, "%d\n", alarm);
-}
-static DEVICE_ATTR_RO(temp1_max_alarm);
-
-static struct attribute *dsa_hwmon_attrs[] = {
- &dev_attr_temp1_input.attr, /* 0 */
- &dev_attr_temp1_max.attr, /* 1 */
- &dev_attr_temp1_max_alarm.attr, /* 2 */
- NULL
-};
-
-static umode_t dsa_hwmon_attrs_visible(struct kobject *kobj,
- struct attribute *attr, int index)
-{
- struct device *dev = container_of(kobj, struct device, kobj);
- struct dsa_switch *ds = dev_get_drvdata(dev);
- const struct dsa_switch_ops *ops = ds->ops;
- umode_t mode = attr->mode;
-
- if (index == 1) {
- if (!ops->get_temp_limit)
- mode = 0;
- else if (!ops->set_temp_limit)
- mode &= ~S_IWUSR;
- } else if (index == 2 && !ops->get_temp_alarm) {
- mode = 0;
- }
- return mode;
-}
-
-static const struct attribute_group dsa_hwmon_group = {
- .attrs = dsa_hwmon_attrs,
- .is_visible = dsa_hwmon_attrs_visible,
-};
-__ATTRIBUTE_GROUPS(dsa_hwmon);
-
-void dsa_hwmon_register(struct dsa_switch *ds)
-{
- const char *netname = netdev_name(ds->dst->master_netdev);
- char hname[IFNAMSIZ + 1];
- int i, j;
-
- /* If the switch provides temperature accessors, register with hardware
- * monitoring subsystem. Treat registration error as non-fatal.
- */
- if (!ds->ops->get_temp)
- return;
-
- /* Create valid hwmon 'name' attribute */
- for (i = j = 0; i < IFNAMSIZ && netname[i]; i++) {
- if (isalnum(netname[i]))
- hname[j++] = netname[i];
- }
- hname[j] = '\0';
- scnprintf(ds->hwmon_name, sizeof(ds->hwmon_name), "%s_dsa%d", hname,
- ds->index);
- ds->hwmon_dev = hwmon_device_register_with_groups(NULL, ds->hwmon_name,
- ds, dsa_hwmon_groups);
- if (IS_ERR(ds->hwmon_dev)) {
- pr_warn("DSA: failed to register HWMON subsystem for switch %d\n",
- ds->index);
- ds->hwmon_dev = NULL;
- } else {
- pr_info("DSA: registered HWMON subsystem for switch %d\n",
- ds->index);
- }
-}
-
-void dsa_hwmon_unregister(struct dsa_switch *ds)
-{
- if (ds->hwmon_dev) {
- hwmon_device_unregister(ds->hwmon_dev);
- ds->hwmon_dev = NULL;
- }
-}
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff