powerpc/powernv: Display diag data on p7ioc EEH errors
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>
Tue, 29 Nov 2011 18:22:53 +0000 (18:22 +0000)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Wed, 7 Dec 2011 07:04:02 +0000 (18:04 +1100)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
arch/powerpc/platforms/powernv/pci-ioda.c
arch/powerpc/platforms/powernv/pci-p5ioc2.c
arch/powerpc/platforms/powernv/pci.c
arch/powerpc/platforms/powernv/pci.h

index 425c2b297945abe8b2341a8a9552eb8f6fb45fae..f31162cfdaa9762f71cafe41e0f815e92181f6fd 100644 (file)
@@ -9,7 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#define DEBUG
+#undef DEBUG
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -467,14 +467,13 @@ static void __devinit pnv_ioda_update_resources(struct pci_bus *bus)
        struct pci_bus *cbus;
        struct pci_dev *cdev;
        unsigned int i;
-       u16 cmd;
 
-       /* Clear all device enables  */
-       list_for_each_entry(cdev, &bus->devices, bus_list) {
-               pci_read_config_word(cdev, PCI_COMMAND, &cmd);
-               cmd &= ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER);
-               pci_write_config_word(cdev, PCI_COMMAND, cmd);
-       }
+       /* We used to clear all device enables here. However it looks like
+        * clearing MEM enable causes Obsidian (IPR SCS) to go bonkers,
+        * and shoot fatal errors to the PHB which in turns fences itself
+        * and we can't recover from that ... yet. So for now, let's leave
+        * the enables as-is and hope for the best.
+        */
 
        /* Check if bus resources fit in our IO or M32 range */
        for (i = 0; bus->self && (i < 2); i++) {
@@ -618,7 +617,7 @@ static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
                struct pci_dn *pdn = pnv_ioda_get_pdn(parent);
                if (pdn && pdn->pe_number != IODA_INVALID_PE) {
                        rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
-                                               pe->pe_number, 1);
+                                               pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
                        /* XXX What to do in case of error ? */
                }
                parent = parent->bus->self;
@@ -638,7 +637,7 @@ static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
                        pe->mve_number = -1;
                } else {
                        rc = opal_pci_set_mve_enable(phb->opal_id,
-                                                    pe->mve_number, 1);
+                                                    pe->mve_number, OPAL_ENABLE_MVE);
                        if (rc) {
                                pe_err(pe, "OPAL error %ld enabling MVE %d\n",
                                       rc, pe->mve_number);
@@ -1187,6 +1186,12 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
        phb->opal_id = phb_id;
        phb->type = PNV_PHB_IODA1;
 
+       /* Detect specific models for error handling */
+       if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
+               phb->model = PNV_PHB_MODEL_P7IOC;
+       else
+               phb->model = PNV_PHB_MODEL_UNKNOWN;
+
        /* We parse "ranges" now since we need to deduce the register base
         * from the IO base
         */
index 4c80f7c77d56cadb10c8eae97f1b61e0e6d1d5b2..264967770c3ab7cf1272e7a69fd20cb12dda0b18 100644 (file)
@@ -137,6 +137,7 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np,
        phb->hose->private_data = phb;
        phb->opal_id = phb_id;
        phb->type = PNV_PHB_P5IOC2;
+       phb->model = PNV_PHB_MODEL_P5IOC2;
 
        phb->regs = of_iomap(np, 0);
 
index c0ed379498a0e391bff0aaf5d64032de6b0fafe4..a70bc1e385eba68e49815599eeec52de1492e6d2 100644 (file)
@@ -144,6 +144,112 @@ static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
 }
 #endif /* CONFIG_PCI_MSI */
 
+static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
+{
+       struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc;
+       int i;
+
+       pr_info("PHB %d diagnostic data:\n", phb->hose->global_number);
+
+       pr_info("  brdgCtl              = 0x%08x\n", data->brdgCtl);
+
+       pr_info("  portStatusReg        = 0x%08x\n", data->portStatusReg);
+       pr_info("  rootCmplxStatus      = 0x%08x\n", data->rootCmplxStatus);
+       pr_info("  busAgentStatus       = 0x%08x\n", data->busAgentStatus);
+
+       pr_info("  deviceStatus         = 0x%08x\n", data->deviceStatus);
+       pr_info("  slotStatus           = 0x%08x\n", data->slotStatus);
+       pr_info("  linkStatus           = 0x%08x\n", data->linkStatus);
+       pr_info("  devCmdStatus         = 0x%08x\n", data->devCmdStatus);
+       pr_info("  devSecStatus         = 0x%08x\n", data->devSecStatus);
+
+       pr_info("  rootErrorStatus      = 0x%08x\n", data->rootErrorStatus);
+       pr_info("  uncorrErrorStatus    = 0x%08x\n", data->uncorrErrorStatus);
+       pr_info("  corrErrorStatus      = 0x%08x\n", data->corrErrorStatus);
+       pr_info("  tlpHdr1              = 0x%08x\n", data->tlpHdr1);
+       pr_info("  tlpHdr2              = 0x%08x\n", data->tlpHdr2);
+       pr_info("  tlpHdr3              = 0x%08x\n", data->tlpHdr3);
+       pr_info("  tlpHdr4              = 0x%08x\n", data->tlpHdr4);
+       pr_info("  sourceId             = 0x%08x\n", data->sourceId);
+
+       pr_info("  errorClass           = 0x%016llx\n", data->errorClass);
+       pr_info("  correlator           = 0x%016llx\n", data->correlator);
+
+       pr_info("  p7iocPlssr           = 0x%016llx\n", data->p7iocPlssr);
+       pr_info("  p7iocCsr             = 0x%016llx\n", data->p7iocCsr);
+       pr_info("  lemFir               = 0x%016llx\n", data->lemFir);
+       pr_info("  lemErrorMask         = 0x%016llx\n", data->lemErrorMask);
+       pr_info("  lemWOF               = 0x%016llx\n", data->lemWOF);
+       pr_info("  phbErrorStatus       = 0x%016llx\n", data->phbErrorStatus);
+       pr_info("  phbFirstErrorStatus  = 0x%016llx\n", data->phbFirstErrorStatus);
+       pr_info("  phbErrorLog0         = 0x%016llx\n", data->phbErrorLog0);
+       pr_info("  phbErrorLog1         = 0x%016llx\n", data->phbErrorLog1);
+       pr_info("  mmioErrorStatus      = 0x%016llx\n", data->mmioErrorStatus);
+       pr_info("  mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus);
+       pr_info("  mmioErrorLog0        = 0x%016llx\n", data->mmioErrorLog0);
+       pr_info("  mmioErrorLog1        = 0x%016llx\n", data->mmioErrorLog1);
+       pr_info("  dma0ErrorStatus      = 0x%016llx\n", data->dma0ErrorStatus);
+       pr_info("  dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus);
+       pr_info("  dma0ErrorLog0        = 0x%016llx\n", data->dma0ErrorLog0);
+       pr_info("  dma0ErrorLog1        = 0x%016llx\n", data->dma0ErrorLog1);
+       pr_info("  dma1ErrorStatus      = 0x%016llx\n", data->dma1ErrorStatus);
+       pr_info("  dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus);
+       pr_info("  dma1ErrorLog0        = 0x%016llx\n", data->dma1ErrorLog0);
+       pr_info("  dma1ErrorLog1        = 0x%016llx\n", data->dma1ErrorLog1);
+
+       for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
+               if ((data->pestA[i] >> 63) == 0 &&
+                   (data->pestB[i] >> 63) == 0)
+                       continue;
+               pr_info("  PE[%3d] PESTA        = 0x%016llx\n", i, data->pestA[i]);
+               pr_info("          PESTB        = 0x%016llx\n", data->pestB[i]);
+       }
+}
+
+static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb)
+{
+       switch(phb->model) {
+       case PNV_PHB_MODEL_P7IOC:
+               pnv_pci_dump_p7ioc_diag_data(phb);
+               break;
+       default:
+               pr_warning("PCI %d: Can't decode this PHB diag data\n",
+                          phb->hose->global_number);
+       }
+}
+
+static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
+{
+       unsigned long flags, rc;
+       int has_diag;
+
+       spin_lock_irqsave(&phb->lock, flags);
+
+       rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
+       has_diag = (rc == OPAL_SUCCESS);
+
+       rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+                                      OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+       if (rc) {
+               pr_warning("PCI %d: Failed to clear EEH freeze state"
+                          " for PE#%d, err %ld\n",
+                          phb->hose->global_number, pe_no, rc);
+
+               /* For now, let's only display the diag buffer when we fail to clear
+                * the EEH status. We'll do more sensible things later when we have
+                * proper EEH support. We need to make sure we don't pollute ourselves
+                * with the normal errors generated when probing empty slots
+                */
+               if (has_diag)
+                       pnv_pci_dump_phb_diag_data(phb);
+               else
+                       pr_warning("PCI %d: No diag data available\n",
+                                  phb->hose->global_number);
+       }
+
+       spin_unlock_irqrestore(&phb->lock, flags);
+}
+
 static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
                                     u32 bdfn)
 {
@@ -165,15 +271,8 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
        }
        cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
                bdfn, pe_no, fstate);
-       if (fstate != 0) {
-               rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
-                                             OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
-               if (rc) {
-                       pr_warning("PCI %d: Failed to clear EEH freeze state"
-                                  " for PE#%d, err %lld\n",
-                                  phb->hose->global_number, pe_no, rc);
-               }
-       }
+       if (fstate != 0)
+               pnv_pci_handle_eeh_config(phb, pe_no);
 }
 
 static int pnv_pci_read_config(struct pci_bus *bus,
index 28ae4ca512c4752db3ede399e37a581b98da0dc5..8bc47963464315ea2a72bbe722d5eb3613d5d928 100644 (file)
@@ -9,6 +9,15 @@ enum pnv_phb_type {
        PNV_PHB_IODA2,
 };
 
+/* Precise PHB model for error management */
+enum pnv_phb_model {
+       PNV_PHB_MODEL_UNKNOWN,
+       PNV_PHB_MODEL_P5IOC2,
+       PNV_PHB_MODEL_P7IOC,
+};
+
+#define PNV_PCI_DIAG_BUF_SIZE  4096
+
 /* Data associated with a PE, including IOMMU tracking etc.. */
 struct pnv_ioda_pe {
        /* A PE can be associated with a single device or an
@@ -56,6 +65,7 @@ struct pnv_ioda_pe {
 struct pnv_phb {
        struct pci_controller   *hose;
        enum pnv_phb_type       type;
+       enum pnv_phb_model      model;
        u64                     opal_id;
        void __iomem            *regs;
        spinlock_t              lock;
@@ -118,6 +128,12 @@ struct pnv_phb {
                        struct list_head        pe_list;
                } ioda;
        };
+
+       /* PHB status structure */
+       union {
+               unsigned char                   blob[PNV_PCI_DIAG_BUF_SIZE];
+               struct OpalIoP7IOCPhbErrorData  p7ioc;
+       } diag;
 };
 
 extern struct pci_ops pnv_pci_ops;