int t4_sge_init(struct adapter *adap)
{
struct sge *s = &adap->sge;
- u32 sge_control, sge_conm_ctrl;
+ u32 sge_control, sge_control2, sge_conm_ctrl;
+ unsigned int ingpadboundary, ingpackboundary;
int ret, egress_threshold;
/*
sge_control = t4_read_reg(adap, SGE_CONTROL);
s->pktshift = PKTSHIFT_GET(sge_control);
s->stat_len = (sge_control & EGRSTATUSPAGESIZE_MASK) ? 128 : 64;
- s->fl_align = 1 << (INGPADBOUNDARY_GET(sge_control) +
- X_INGPADBOUNDARY_SHIFT);
+
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately. The actual Ingress Packet Data alignment boundary
+ * within Packed Buffer Mode is the maximum of these two
+ * specifications.
+ */
+ ingpadboundary = 1 << (INGPADBOUNDARY_GET(sge_control) +
+ X_INGPADBOUNDARY_SHIFT);
+ if (is_t4(adap->params.chip)) {
+ s->fl_align = ingpadboundary;
+ } else {
+ /* T5 has a different interpretation of one of the PCIe Packing
+ * Boundary values.
+ */
+ sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
+ ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
+ if (ingpackboundary == INGPACKBOUNDARY_16B_X)
+ ingpackboundary = 16;
+ else
+ ingpackboundary = 1 << (ingpackboundary +
+ INGPACKBOUNDARY_SHIFT_X);
+
+ s->fl_align = max(ingpadboundary, ingpackboundary);
+ }
if (adap->flags & USING_SOFT_PARAMS)
ret = t4_sge_init_soft(adap);
HOSTPAGESIZEPF6(sge_hps) |
HOSTPAGESIZEPF7(sge_hps));
- t4_set_reg_field(adap, SGE_CONTROL,
- INGPADBOUNDARY_MASK |
- EGRSTATUSPAGESIZE_MASK,
- INGPADBOUNDARY(fl_align_log - 5) |
- EGRSTATUSPAGESIZE(stat_len != 64));
-
+ if (is_t4(adap->params.chip)) {
+ t4_set_reg_field(adap, SGE_CONTROL,
+ INGPADBOUNDARY_MASK |
+ EGRSTATUSPAGESIZE_MASK,
+ INGPADBOUNDARY(fl_align_log - 5) |
+ EGRSTATUSPAGESIZE(stat_len != 64));
+ } else {
+ /* T5 introduced the separation of the Free List Padding and
+ * Packing Boundaries. Thus, we can select a smaller Padding
+ * Boundary to avoid uselessly chewing up PCIe Link and Memory
+ * Bandwidth, and use a Packing Boundary which is large enough
+ * to avoid false sharing between CPUs, etc.
+ *
+ * For the PCI Link, the smaller the Padding Boundary the
+ * better. For the Memory Controller, a smaller Padding
+ * Boundary is better until we cross under the Memory Line
+ * Size (the minimum unit of transfer to/from Memory). If we
+ * have a Padding Boundary which is smaller than the Memory
+ * Line Size, that'll involve a Read-Modify-Write cycle on the
+ * Memory Controller which is never good. For T5 the smallest
+ * Padding Boundary which we can select is 32 bytes which is
+ * larger than any known Memory Controller Line Size so we'll
+ * use that.
+ *
+ * T5 has a different interpretation of the "0" value for the
+ * Packing Boundary. This corresponds to 16 bytes instead of
+ * the expected 32 bytes. We never have a Packing Boundary
+ * less than 32 bytes so we can't use that special value but
+ * on the other hand, if we wanted 32 bytes, the best we can
+ * really do is 64 bytes.
+ */
+ if (fl_align <= 32) {
+ fl_align = 64;
+ fl_align_log = 6;
+ }
+ t4_set_reg_field(adap, SGE_CONTROL,
+ INGPADBOUNDARY_MASK |
+ EGRSTATUSPAGESIZE_MASK,
+ INGPADBOUNDARY(INGPCIEBOUNDARY_32B_X) |
+ EGRSTATUSPAGESIZE(stat_len != 64));
+ t4_set_reg_field(adap, SGE_CONTROL2_A,
+ INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
+ INGPACKBOUNDARY_V(fl_align_log -
+ INGPACKBOUNDARY_SHIFT_X));
+ }
/*
* Adjust various SGE Free List Host Buffer Sizes.
*
#define X_INGPADBOUNDARY_SHIFT 5
#define SGE_CONTROL 0x1008
+#define SGE_CONTROL2_A 0x1124
#define DCASYSTYPE 0x00080000U
#define RXPKTCPLMODE_MASK 0x00040000U
#define RXPKTCPLMODE_SHIFT 18
#define PKTSHIFT_SHIFT 10
#define PKTSHIFT(x) ((x) << PKTSHIFT_SHIFT)
#define PKTSHIFT_GET(x) (((x) & PKTSHIFT_MASK) >> PKTSHIFT_SHIFT)
+#define INGPCIEBOUNDARY_32B_X 0
#define INGPCIEBOUNDARY_MASK 0x00000380U
#define INGPCIEBOUNDARY_SHIFT 7
#define INGPCIEBOUNDARY(x) ((x) << INGPCIEBOUNDARY_SHIFT)
#define INGPADBOUNDARY(x) ((x) << INGPADBOUNDARY_SHIFT)
#define INGPADBOUNDARY_GET(x) (((x) & INGPADBOUNDARY_MASK) \
>> INGPADBOUNDARY_SHIFT)
+#define INGPACKBOUNDARY_16B_X 0
+#define INGPACKBOUNDARY_SHIFT_X 5
+
+#define INGPACKBOUNDARY_S 16
+#define INGPACKBOUNDARY_M 0x7U
+#define INGPACKBOUNDARY_V(x) ((x) << INGPACKBOUNDARY_S)
+#define INGPACKBOUNDARY_G(x) (((x) >> INGPACKBOUNDARY_S) \
+ & INGPACKBOUNDARY_M)
#define EGRPCIEBOUNDARY_MASK 0x0000000eU
#define EGRPCIEBOUNDARY_SHIFT 1
#define EGRPCIEBOUNDARY(x) ((x) << EGRPCIEBOUNDARY_SHIFT)
u32 fl0 = sge_params->sge_fl_buffer_size[0];
u32 fl1 = sge_params->sge_fl_buffer_size[1];
struct sge *s = &adapter->sge;
+ unsigned int ingpadboundary, ingpackboundary;
/*
* Start by vetting the basic SGE parameters which have been set up by
s->stat_len = ((sge_params->sge_control & EGRSTATUSPAGESIZE_MASK)
? 128 : 64);
s->pktshift = PKTSHIFT_GET(sge_params->sge_control);
- s->fl_align = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) +
- SGE_INGPADBOUNDARY_SHIFT);
+
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately. The actual Ingress Packet Data alignment boundary
+ * within Packed Buffer Mode is the maximum of these two
+ * specifications. (Note that it makes no real practical sense to
+ * have the Pading Boudary be larger than the Packing Boundary but you
+ * could set the chip up that way and, in fact, legacy T4 code would
+ * end doing this because it would initialize the Padding Boundary and
+ * leave the Packing Boundary initialized to 0 (16 bytes).)
+ */
+ ingpadboundary = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) +
+ X_INGPADBOUNDARY_SHIFT);
+ if (is_t4(adapter->params.chip)) {
+ s->fl_align = ingpadboundary;
+ } else {
+ /* T5 has a different interpretation of one of the PCIe Packing
+ * Boundary values.
+ */
+ ingpackboundary = INGPACKBOUNDARY_G(sge_params->sge_control2);
+ if (ingpackboundary == INGPACKBOUNDARY_16B_X)
+ ingpackboundary = 16;
+ else
+ ingpackboundary = 1 << (ingpackboundary +
+ INGPACKBOUNDARY_SHIFT_X);
+
+ s->fl_align = max(ingpadboundary, ingpackboundary);
+ }
/*
* Set up tasklet timers.
*/
struct sge_params {
u32 sge_control; /* padding, boundaries, lengths, etc. */
+ u32 sge_control2; /* T5: more of the same */
u32 sge_host_page_size; /* RDMA page sizes */
u32 sge_queues_per_page; /* RDMA queues/page */
u32 sge_user_mode_limits; /* limits for BAR2 user mode accesses */
sge_params->sge_timer_value_2_and_3 = vals[5];
sge_params->sge_timer_value_4_and_5 = vals[6];
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately with the Padding Boundary in SGE_CONTROL and and Packing
+ * Boundary in SGE_CONTROL2. So for T5 and later we need to grab
+ * SGE_CONTROL in order to determine how ingress packet data will be
+ * laid out in Packed Buffer Mode. Unfortunately, older versions of
+ * the firmware won't let us retrieve SGE_CONTROL2 so if we get a
+ * failure grabbing it we throw an error since we can't figure out the
+ * right value.
+ */
+ if (!is_t4(adapter->params.chip)) {
+ params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ FW_PARAMS_PARAM_XYZ(SGE_CONTROL2_A));
+ v = t4vf_query_params(adapter, 1, params, vals);
+ if (v != FW_SUCCESS) {
+ dev_err(adapter->pdev_dev,
+ "Unable to get SGE Control2; "
+ "probably old firmware.\n");
+ return v;
+ }
+ sge_params->sge_control2 = vals[0];
+ }
+
params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
FW_PARAMS_PARAM_XYZ(SGE_INGRESS_RX_THRESHOLD));
v = t4vf_query_params(adapter, 1, params, vals);
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff