MIPS: Alchemy: devboards: Convert to gpio calls.

Replace a few open-coded GPIO register accesses with gpio calls.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c
index 0191c936cb5e258b35024babf72a8b63fcb872dd..4791011e8f9277585572a58672c25f4cac912a10 100644 (file)
--- a/arch/mips/alchemy/common/reset.c
+++ b/arch/mips/alchemy/common/reset.c
@@ -27,8 +27,9 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <asm/cacheflush.h>
+#include <linux/gpio.h>
 
+#include <asm/cacheflush.h>
 #include <asm/mach-au1x00/au1000.h>
 
 void au1000_restart(char *command)
@@ -161,7 +162,7 @@ void au1000_halt(void)
 #else
        printk(KERN_NOTICE "\n** You can safely turn off the power\n");
 #ifdef CONFIG_MIPS_MIRAGE
-       au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
+       gpio_direction_output(210, 1);
 #endif
 #ifdef CONFIG_MIPS_DB1200
        au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);

diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index a75ffbf99f2520fe91806f32205b2af14b4379c4..de30d8ea7176d3a706b828f0b63d936a57eb6bf4 100644 (file)
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -27,6 +27,7 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/gpio.h>
 #include <linux/init.h>
 
 #include <asm/mach-au1x00/au1000.h>
@@ -94,12 +95,12 @@ void __init board_setup(void)
 #endif
        bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
 
-#ifdef CONFIG_MIPS_MIRAGE
        /* Enable GPIO[31:0] inputs */
-       au_writel(0, SYS_PININPUTEN);
+       alchemy_gpio1_input_enable();
 
-       /* GPIO[20] is output, tristate the other input primary GPIOs */
-       au_writel(~(1 << 20), SYS_TRIOUTCLR);
+#ifdef CONFIG_MIPS_MIRAGE
+       /* GPIO[20] is output */
+       alchemy_gpio_direction_output(20, 0);
 
        /* Set GPIO[210:208] instead of SSI_0 */
        pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
@@ -118,8 +119,7 @@ void __init board_setup(void)
         * Enable speaker amplifier.  This should
         * be part of the audio driver.
         */
-       au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
-       au_writel(0x02000200, GPIO2_OUTPUT);
+       alchemy_gpio_direction_output(209, 1);
 #endif
 
        au_sync();

diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index aed2fdecc70996419ba0c9be0c0725a87f5a3999..cd273545e810df42cc9c5e2e636485a0d5fa7cb8 100644 (file)
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -24,6 +24,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/mach-au1x00/au1000.h>
@@ -130,8 +131,11 @@ void __init board_setup(void)
        pin_func |= SYS_PF_USB;
 
        au_writel(pin_func, SYS_PINFUNC);
-       au_writel(0x2800, SYS_TRIOUTCLR);
-       au_writel(0x0030, SYS_OUTPUTCLR);
+
+       alchemy_gpio_direction_input(11);
+       alchemy_gpio_direction_input(13);
+       alchemy_gpio_direction_output(4, 0);
+       alchemy_gpio_direction_output(5, 0);
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
        /* Make GPIO 15 an input (for interrupt line) */
@@ -140,7 +144,7 @@ void __init board_setup(void)
        pin_func |= SYS_PF_I2S;
        au_writel(pin_func, SYS_PINFUNC);
 
-       au_writel(0x8000, SYS_TRIOUTCLR);
+       alchemy_gpio_direction_input(15);
 
        static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
        au_writel(static_cfg0, MEM_STCFG0);

diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index 4df57fae15d4cfe24f2cbe598389ce4efa4781f1..61263081ef58c1100ab5fa67821a29127225d130 100644 (file)
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -23,6 +23,7 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
@@ -88,7 +89,7 @@ void __init board_setup(void)
 
        /* Set AUX clock to 12 MHz * 8 = 96 MHz */
        au_writel(8, SYS_AUXPLL);
-       au_writel(0, SYS_PININPUTEN);
+       alchemy_gpio1_input_enable();
        udelay(100);
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)

diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index fed3b093156ae3a3722f7fba4852d2206b205394..d7a56569e7ed594efd38f4f33b2cb09c0736bdb4 100644 (file)
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -23,8 +23,9 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
@@ -90,11 +91,12 @@ void __init board_setup(void)
        au_writel(0, SYS_PINSTATERD);
        udelay(100);
 
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-
        /* GPIO201 is input for PCMCIA card detect */
        /* GPIO203 is input for PCMCIA interrupt request */
-       au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR);
+       alchemy_gpio_direction_input(201);
+       alchemy_gpio_direction_input(203);
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 
        /* Zero and disable FREQ2 */
        sys_freqctrl = au_readl(SYS_FREQCTRL0);

diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index d5eb9c325ed0c91009641ff462f60aa9afd7711c..632f9862a0fbdb57513f6fefeecdd300c8e360c2 100644 (file)
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -9,6 +9,7 @@
 #include <linux/suspend.h>
 #include <linux/sysfs.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio.h>
 
 /*
  * Generic suspend userspace interface for Alchemy development boards.
@@ -26,7 +27,7 @@ static unsigned long db1x_pm_last_wakesrc;
 static int db1x_pm_enter(suspend_state_t state)
 {
        /* enable GPIO based wakeup */
-       au_writel(1, SYS_PININPUTEN);
+       alchemy_gpio1_input_enable();
 
        /* clear and setup wake cause and source */
        au_writel(0, SYS_WAKEMSK);