atl1c: update PHY reset related routine
authorHuang, Xiong <xiong@qca.qualcomm.com>
Wed, 25 Apr 2012 20:27:14 +0000 (20:27 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 26 Apr 2012 09:03:32 +0000 (05:03 -0400)
Many magic data are re-configured for PHY during its reset operation
based on chip type to get better compability and stability.
REG_PHY_CTRL register may be configured by BIOS before enter OS.
so, the driver can't directly write to it without any Read-Op.
this change also affect suspend and phy_disable routines.
PHY debug ports and extension registers are refined as well.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
drivers/net/ethernet/atheros/atl1c/atl1c_main.c

index a17b5311dcec5c9291e244a7d6bc911899a358e9..9a5b0f398f7887fb94a35282b8ae81de332eff1a 100644 (file)
@@ -457,6 +457,32 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
        return atl1c_write_phy_core(hw, true, dev_addr, reg_addr, phy_data);
 }
 
+int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+       int err;
+
+       err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr);
+       if (unlikely(err))
+               return err;
+       else
+               err = atl1c_read_phy_reg(hw, MII_DBG_DATA, phy_data);
+
+       return err;
+}
+
+int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data)
+{
+       int err;
+
+       err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr);
+       if (unlikely(err))
+               return err;
+       else
+               err = atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);
+
+       return err;
+}
+
 /*
  * Configures PHY autoneg and flow control advertisement settings
  *
@@ -499,119 +525,107 @@ static int atl1c_phy_setup_adv(struct atl1c_hw *hw)
 
 void atl1c_phy_disable(struct atl1c_hw *hw)
 {
-       AT_WRITE_REGW(hw, REG_GPHY_CTRL,
-                       GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET);
+       u32 phy_ctrl_data;
+
+       AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data);
+       phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS);
+       phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE |
+                       GPHY_CTRL_HIB_EN | GPHY_CTRL_PHY_IDDQ |
+                       GPHY_CTRL_PWDOWN_HW;
+       AT_WRITE_REGW(hw, REG_GPHY_CTRL, phy_ctrl_data);
 }
 
-static void atl1c_phy_magic_data(struct atl1c_hw *hw)
-{
-       u16 data;
-
-       data = ANA_LOOP_SEL_10BT | ANA_EN_MASK_TB | ANA_EN_10BT_IDLE |
-               ((1 & ANA_INTERVAL_SEL_TIMER_MASK) <<
-               ANA_INTERVAL_SEL_TIMER_SHIFT);
-
-       atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_18);
-       atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
-       data = (2 & ANA_SERDES_CDR_BW_MASK) | ANA_MS_PAD_DBG |
-               ANA_SERDES_EN_DEEM | ANA_SERDES_SEL_HSP | ANA_SERDES_EN_PLL |
-               ANA_SERDES_EN_LCKDT;
-
-       atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_5);
-       atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
-       data = (44 & ANA_LONG_CABLE_TH_100_MASK) |
-               ((33 & ANA_SHORT_CABLE_TH_100_MASK) <<
-               ANA_SHORT_CABLE_TH_100_SHIFT) | ANA_BP_BAD_LINK_ACCUM |
-               ANA_BP_SMALL_BW;
-
-       atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_54);
-       atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
-       data = (11 & ANA_IECHO_ADJ_MASK) | ((11 & ANA_IECHO_ADJ_MASK) <<
-               ANA_IECHO_ADJ_2_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
-               ANA_IECHO_ADJ_1_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
-               ANA_IECHO_ADJ_0_SHIFT);
-
-       atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_4);
-       atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
-       data = ANA_RESTART_CAL | ((7 & ANA_MANUL_SWICH_ON_MASK) <<
-               ANA_MANUL_SWICH_ON_SHIFT) | ANA_MAN_ENABLE |
-               ANA_SEL_HSP | ANA_EN_HB | ANA_OEN_125M;
-
-       atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_0);
-       atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
-       if (hw->ctrl_flags & ATL1C_HIB_DISABLE) {
-               atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_41);
-               if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
-                       return;
-               data &= ~ANA_TOP_PS_EN;
-               atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
-               atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_11);
-               if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
-                       return;
-               data &= ~ANA_PS_HIB_EN;
-               atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-       }
-}
 
 int atl1c_phy_reset(struct atl1c_hw *hw)
 {
        struct atl1c_adapter *adapter = hw->adapter;
        struct pci_dev *pdev = adapter->pdev;
        u16 phy_data;
-       u32 phy_ctrl_data = GPHY_CTRL_DEFAULT;
-       u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN;
+       u32 phy_ctrl_data, lpi_ctrl;
        int err;
 
-       if (hw->ctrl_flags & ATL1C_HIB_DISABLE)
-               phy_ctrl_data &= ~GPHY_CTRL_HIB_EN;
-
+       /* reset PHY core */
+       AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data);
+       phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_PHY_IDDQ |
+               GPHY_CTRL_GATE_25M_EN | GPHY_CTRL_PWDOWN_HW | GPHY_CTRL_CLS);
+       phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST;
+       if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE))
+               phy_ctrl_data |= (GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE);
+       else
+               phy_ctrl_data &= ~(GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE);
        AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
        AT_WRITE_FLUSH(hw);
-       msleep(40);
-       phy_ctrl_data |= GPHY_CTRL_EXT_RESET;
-       AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
+       udelay(10);
+       AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data | GPHY_CTRL_EXT_RESET);
        AT_WRITE_FLUSH(hw);
-       msleep(10);
+       udelay(10 * GPHY_CTRL_EXT_RST_TO);      /* delay 800us */
 
+       /* switch clock */
        if (hw->nic_type == athr_l2c_b) {
-               atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x0A);
-               atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
-               atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xDFFF);
+               atl1c_read_phy_dbg(hw, MIIDBG_CFGLPSPD, &phy_data);
+               atl1c_write_phy_dbg(hw, MIIDBG_CFGLPSPD,
+                       phy_data & ~CFGLPSPD_RSTCNT_CLK125SW);
        }
 
-       if (hw->nic_type == athr_l2c_b ||
-           hw->nic_type == athr_l2c_b2 ||
-           hw->nic_type == athr_l1d ||
-           hw->nic_type == athr_l1d_2) {
-               atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
-               atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
-               atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xFFF7);
-               msleep(20);
+       /* tx-half amplitude issue fix */
+       if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) {
+               atl1c_read_phy_dbg(hw, MIIDBG_CABLE1TH_DET, &phy_data);
+               phy_data |= CABLE1TH_DET_EN;
+               atl1c_write_phy_dbg(hw, MIIDBG_CABLE1TH_DET, phy_data);
        }
-       if (hw->nic_type == athr_l1d) {
-               atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);
-               atl1c_write_phy_reg(hw, MII_DBG_DATA, 0x929D);
+
+       /* clear bit3 of dbgport 3B to lower voltage */
+       if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE)) {
+               if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) {
+                       atl1c_read_phy_dbg(hw, MIIDBG_VOLT_CTRL, &phy_data);
+                       phy_data &= ~VOLT_CTRL_SWLOWEST;
+                       atl1c_write_phy_dbg(hw, MIIDBG_VOLT_CTRL, phy_data);
+               }
+               /* power saving config */
+               phy_data =
+                       hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 ?
+                       L1D_LEGCYPS_DEF : L1C_LEGCYPS_DEF;
+               atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS, phy_data);
+               /* hib */
+               atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL,
+                       SYSMODCTRL_IECHOADJ_DEF);
+       } else {
+               /* disable pws */
+               atl1c_read_phy_dbg(hw, MIIDBG_LEGCYPS, &phy_data);
+               atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS,
+                       phy_data & ~LEGCYPS_EN);
+               /* disable hibernate */
+               atl1c_read_phy_dbg(hw, MIIDBG_HIBNEG, &phy_data);
+               atl1c_write_phy_dbg(hw, MIIDBG_HIBNEG,
+                       phy_data & HIBNEG_PSHIB_EN);
        }
-       if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b2
-               || hw->nic_type == athr_l2c) {
-               atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);
-               atl1c_write_phy_reg(hw, MII_DBG_DATA, 0xB6DD);
+       /* disable AZ(EEE) by default */
+       if (hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 ||
+           hw->nic_type == athr_l2c_b2) {
+               AT_READ_REG(hw, REG_LPI_CTRL, &lpi_ctrl);
+               AT_WRITE_REG(hw, REG_LPI_CTRL, lpi_ctrl & ~LPI_CTRL_EN);
+               atl1c_write_phy_ext(hw, MIIEXT_ANEG, MIIEXT_LOCAL_EEEADV, 0);
+               atl1c_write_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL3,
+                       L2CB_CLDCTRL3);
        }
-       err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data);
+
+       /* other debug port to set */
+       atl1c_write_phy_dbg(hw, MIIDBG_ANACTRL, ANACTRL_DEF);
+       atl1c_write_phy_dbg(hw, MIIDBG_SRDSYSMOD, SRDSYSMOD_DEF);
+       atl1c_write_phy_dbg(hw, MIIDBG_TST10BTCFG, TST10BTCFG_DEF);
+       /* UNH-IOL test issue, set bit7 */
+       atl1c_write_phy_dbg(hw, MIIDBG_TST100BTCFG,
+               TST100BTCFG_DEF | TST100BTCFG_LITCH_EN);
+
+       /* set phy interrupt mask */
+       phy_data = IER_LINK_UP | IER_LINK_DOWN;
+       err = atl1c_write_phy_reg(hw, MII_IER, phy_data);
        if (err) {
                if (netif_msg_hw(adapter))
                        dev_err(&pdev->dev,
                                "Error enable PHY linkChange Interrupt\n");
                return err;
        }
-       if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION))
-               atl1c_phy_magic_data(hw);
        return 0;
 }
 
index 113e67bf179bf89d4a77ca63b12913eb0cbe45aa..fba7eb5db2ed103118efaf56b789a997536ad451 100644 (file)
@@ -60,6 +60,9 @@ int atl1c_read_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
                        u16 reg_addr, u16 *phy_data);
 int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
                        u16 reg_addr, u16 phy_data);
+int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
+int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data);
+
 /* register definition */
 #define REG_DEVICE_CAP                 0x5C
 #define DEVICE_CAP_MAX_PAYLOAD_MASK     0x7
@@ -222,41 +225,32 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
 #define IRQ_MODRT_RX_TIMER_SHIFT       16
 
 #define REG_GPHY_CTRL                  0x140C
-#define GPHY_CTRL_EXT_RESET            0x1
-#define GPHY_CTRL_RTL_MODE             0x2
-#define GPHY_CTRL_LED_MODE             0x4
-#define GPHY_CTRL_ANEG_NOW             0x8
-#define GPHY_CTRL_REV_ANEG             0x10
-#define GPHY_CTRL_GATE_25M_EN          0x20
-#define GPHY_CTRL_LPW_EXIT             0x40
-#define GPHY_CTRL_PHY_IDDQ             0x80
-#define GPHY_CTRL_PHY_IDDQ_DIS         0x100
-#define GPHY_CTRL_GIGA_DIS             0x200
-#define GPHY_CTRL_HIB_EN               0x400
-#define GPHY_CTRL_HIB_PULSE            0x800
-#define GPHY_CTRL_SEL_ANA_RST          0x1000
-#define GPHY_CTRL_PHY_PLL_ON           0x2000
-#define GPHY_CTRL_PWDOWN_HW            0x4000
-#define GPHY_CTRL_PHY_PLL_BYPASS       0x8000
-
-#define GPHY_CTRL_DEFAULT (             \
-               GPHY_CTRL_SEL_ANA_RST   |\
-               GPHY_CTRL_HIB_PULSE     |\
-               GPHY_CTRL_HIB_EN)
-
-#define GPHY_CTRL_PW_WOL_DIS (          \
-               GPHY_CTRL_SEL_ANA_RST   |\
-               GPHY_CTRL_HIB_PULSE     |\
-               GPHY_CTRL_HIB_EN        |\
-               GPHY_CTRL_PWDOWN_HW     |\
-               GPHY_CTRL_PHY_IDDQ)
-
-#define GPHY_CTRL_POWER_SAVING (       \
-               GPHY_CTRL_SEL_ANA_RST   |\
-               GPHY_CTRL_HIB_EN        |\
-               GPHY_CTRL_HIB_PULSE     |\
-               GPHY_CTRL_PWDOWN_HW     |\
-               GPHY_CTRL_PHY_IDDQ)
+#define GPHY_CTRL_ADDR_MASK            0x1FUL
+#define GPHY_CTRL_ADDR_SHIFT           19
+#define GPHY_CTRL_BP_VLTGSW            BIT(18)
+#define GPHY_CTRL_100AB_EN             BIT(17)
+#define GPHY_CTRL_10AB_EN              BIT(16)
+#define GPHY_CTRL_PHY_PLL_BYPASS       BIT(15)
+#define GPHY_CTRL_PWDOWN_HW            BIT(14) /* affect MAC&PHY, to low pw */
+#define GPHY_CTRL_PHY_PLL_ON           BIT(13) /* 1:pll always on, 0:can sw */
+#define GPHY_CTRL_SEL_ANA_RST          BIT(12)
+#define GPHY_CTRL_HIB_PULSE            BIT(11)
+#define GPHY_CTRL_HIB_EN               BIT(10)
+#define GPHY_CTRL_GIGA_DIS             BIT(9)
+#define GPHY_CTRL_PHY_IDDQ_DIS         BIT(8)  /* pw on RST */
+#define GPHY_CTRL_PHY_IDDQ             BIT(7)  /* bit8 affect bit7 while rb */
+#define GPHY_CTRL_LPW_EXIT             BIT(6)
+#define GPHY_CTRL_GATE_25M_EN          BIT(5)
+#define GPHY_CTRL_REV_ANEG             BIT(4)
+#define GPHY_CTRL_ANEG_NOW             BIT(3)
+#define GPHY_CTRL_LED_MODE             BIT(2)
+#define GPHY_CTRL_RTL_MODE             BIT(1)
+#define GPHY_CTRL_EXT_RESET            BIT(0)  /* 1:out of DSP RST status */
+#define GPHY_CTRL_EXT_RST_TO           80      /* 800us atmost */
+#define GPHY_CTRL_CLS                  (\
+       GPHY_CTRL_LED_MODE              |\
+       GPHY_CTRL_100AB_EN              |\
+       GPHY_CTRL_PHY_PLL_ON)
 
 /* Block IDLE Status Register */
 #define REG_IDLE_STATUS                        0x1410
@@ -350,6 +344,26 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
 #define SERDES_LOCK_DETECT_EN          BIT(1)
 #define SERDES_LOCK_DETECT             BIT(0)
 
+#define REG_LPI_DECISN_TIMER            0x143C
+#define L2CB_LPI_DESISN_TIMER          0x7D00
+
+#define REG_LPI_CTRL                    0x1440
+#define LPI_CTRL_CHK_DA                        BIT(31)
+#define LPI_CTRL_ENH_TO_MASK           0x1FFFUL
+#define LPI_CTRL_ENH_TO_SHIFT          12
+#define LPI_CTRL_ENH_TH_MASK           0x1FUL
+#define LPI_CTRL_ENH_TH_SHIFT          6
+#define LPI_CTRL_ENH_EN                        BIT(5)
+#define LPI_CTRL_CHK_RX                        BIT(4)
+#define LPI_CTRL_CHK_STATE             BIT(3)
+#define LPI_CTRL_GMII                  BIT(2)
+#define LPI_CTRL_TO_PHY                        BIT(1)
+#define LPI_CTRL_EN                    BIT(0)
+
+#define REG_LPI_WAIT                   0x1444
+#define LPI_WAIT_TIMER_MASK            0xFFFFUL
+#define LPI_WAIT_TIMER_SHIFT           0
+
 /* MAC Control Register  */
 #define REG_MAC_CTRL                   0x1480
 #define MAC_CTRL_TX_EN                 0x1
@@ -813,73 +827,188 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
 #define MII_DBG_ADDR                   0x1D
 #define MII_DBG_DATA                   0x1E
 
-#define MII_ANA_CTRL_0                 0x0
-#define ANA_RESTART_CAL                        0x0001
-#define ANA_MANUL_SWICH_ON_SHIFT       0x1
-#define ANA_MANUL_SWICH_ON_MASK                0xF
-#define ANA_MAN_ENABLE                 0x0020
-#define ANA_SEL_HSP                    0x0040
-#define ANA_EN_HB                      0x0080
-#define ANA_EN_HBIAS                   0x0100
-#define ANA_OEN_125M                   0x0200
-#define ANA_EN_LCKDT                   0x0400
-#define ANA_LCKDT_PHY                  0x0800
-#define ANA_AFE_MODE                   0x1000
-#define ANA_VCO_SLOW                   0x2000
-#define ANA_VCO_FAST                   0x4000
-#define ANA_SEL_CLK125M_DSP            0x8000
-
-#define MII_ANA_CTRL_4                 0x4
-#define ANA_IECHO_ADJ_MASK             0xF
-#define ANA_IECHO_ADJ_3_SHIFT          0
-#define ANA_IECHO_ADJ_2_SHIFT          4
-#define ANA_IECHO_ADJ_1_SHIFT          8
-#define ANA_IECHO_ADJ_0_SHIFT          12
-
-#define MII_ANA_CTRL_5                 0x5
-#define ANA_SERDES_CDR_BW_SHIFT                0
-#define ANA_SERDES_CDR_BW_MASK         0x3
-#define ANA_MS_PAD_DBG                 0x0004
-#define ANA_SPEEDUP_DBG                        0x0008
-#define ANA_SERDES_TH_LOS_SHIFT                4
-#define ANA_SERDES_TH_LOS_MASK         0x3
-#define ANA_SERDES_EN_DEEM             0x0040
-#define ANA_SERDES_TXELECIDLE          0x0080
-#define ANA_SERDES_BEACON              0x0100
-#define ANA_SERDES_HALFTXDR            0x0200
-#define ANA_SERDES_SEL_HSP             0x0400
-#define ANA_SERDES_EN_PLL              0x0800
-#define ANA_SERDES_EN                  0x1000
-#define ANA_SERDES_EN_LCKDT            0x2000
-
-#define MII_ANA_CTRL_11                        0xB
-#define ANA_PS_HIB_EN                  0x8000
-
-#define MII_ANA_CTRL_18                        0x12
-#define ANA_TEST_MODE_10BT_01SHIFT     0
-#define ANA_TEST_MODE_10BT_01MASK      0x3
-#define ANA_LOOP_SEL_10BT              0x0004
-#define ANA_RGMII_MODE_SW              0x0008
-#define ANA_EN_LONGECABLE              0x0010
-#define ANA_TEST_MODE_10BT_2           0x0020
-#define ANA_EN_10BT_IDLE               0x0400
-#define ANA_EN_MASK_TB                 0x0800
-#define ANA_TRIGGER_SEL_TIMER_SHIFT    12
-#define ANA_TRIGGER_SEL_TIMER_MASK     0x3
-#define ANA_INTERVAL_SEL_TIMER_SHIFT   14
-#define ANA_INTERVAL_SEL_TIMER_MASK    0x3
-
-#define MII_ANA_CTRL_41                        0x29
-#define ANA_TOP_PS_EN                  0x8000
-
-#define MII_ANA_CTRL_54                        0x36
-#define ANA_LONG_CABLE_TH_100_SHIFT    0
-#define ANA_LONG_CABLE_TH_100_MASK     0x3F
-#define ANA_DESERVED                   0x0040
-#define ANA_EN_LIT_CH                  0x0080
-#define ANA_SHORT_CABLE_TH_100_SHIFT   8
-#define ANA_SHORT_CABLE_TH_100_MASK    0x3F
-#define ANA_BP_BAD_LINK_ACCUM          0x4000
-#define ANA_BP_SMALL_BW                        0x8000
+/***************************** debug port *************************************/
+
+#define MIIDBG_ANACTRL                  0x00
+#define ANACTRL_CLK125M_DELAY_EN        0x8000
+#define ANACTRL_VCO_FAST                0x4000
+#define ANACTRL_VCO_SLOW                0x2000
+#define ANACTRL_AFE_MODE_EN             0x1000
+#define ANACTRL_LCKDET_PHY              0x800
+#define ANACTRL_LCKDET_EN               0x400
+#define ANACTRL_OEN_125M                0x200
+#define ANACTRL_HBIAS_EN                0x100
+#define ANACTRL_HB_EN                   0x80
+#define ANACTRL_SEL_HSP                 0x40
+#define ANACTRL_CLASSA_EN               0x20
+#define ANACTRL_MANUSWON_SWR_MASK       3U
+#define ANACTRL_MANUSWON_SWR_SHIFT      2
+#define ANACTRL_MANUSWON_SWR_2V         0
+#define ANACTRL_MANUSWON_SWR_1P9V       1
+#define ANACTRL_MANUSWON_SWR_1P8V       2
+#define ANACTRL_MANUSWON_SWR_1P7V       3
+#define ANACTRL_MANUSWON_BW3_4M         0x2
+#define ANACTRL_RESTART_CAL             0x1
+#define ANACTRL_DEF                     0x02EF
+
+#define MIIDBG_SYSMODCTRL               0x04
+#define SYSMODCTRL_IECHOADJ_PFMH_PHY    0x8000
+#define SYSMODCTRL_IECHOADJ_BIASGEN     0x4000
+#define SYSMODCTRL_IECHOADJ_PFML_PHY    0x2000
+#define SYSMODCTRL_IECHOADJ_PS_MASK     3U
+#define SYSMODCTRL_IECHOADJ_PS_SHIFT    10
+#define SYSMODCTRL_IECHOADJ_PS_40       3
+#define SYSMODCTRL_IECHOADJ_PS_20       2
+#define SYSMODCTRL_IECHOADJ_PS_0        1
+#define SYSMODCTRL_IECHOADJ_10BT_100MV  0x40 /* 1:100mv, 0:200mv */
+#define SYSMODCTRL_IECHOADJ_HLFAP_MASK  3U
+#define SYSMODCTRL_IECHOADJ_HLFAP_SHIFT 4
+#define SYSMODCTRL_IECHOADJ_VDFULBW     0x8
+#define SYSMODCTRL_IECHOADJ_VDBIASHLF   0x4
+#define SYSMODCTRL_IECHOADJ_VDAMPHLF    0x2
+#define SYSMODCTRL_IECHOADJ_VDLANSW     0x1
+#define SYSMODCTRL_IECHOADJ_DEF         0x88BB /* ???? */
+
+/* for l1d & l2cb */
+#define SYSMODCTRL_IECHOADJ_CUR_ADD     0x8000
+#define SYSMODCTRL_IECHOADJ_CUR_MASK    7U
+#define SYSMODCTRL_IECHOADJ_CUR_SHIFT   12
+#define SYSMODCTRL_IECHOADJ_VOL_MASK    0xFU
+#define SYSMODCTRL_IECHOADJ_VOL_SHIFT   8
+#define SYSMODCTRL_IECHOADJ_VOL_17ALL   3
+#define SYSMODCTRL_IECHOADJ_VOL_100M15  1
+#define SYSMODCTRL_IECHOADJ_VOL_10M17   0
+#define SYSMODCTRL_IECHOADJ_BIAS1_MASK  0xFU
+#define SYSMODCTRL_IECHOADJ_BIAS1_SHIFT 4
+#define SYSMODCTRL_IECHOADJ_BIAS2_MASK  0xFU
+#define SYSMODCTRL_IECHOADJ_BIAS2_SHIFT 0
+#define L1D_SYSMODCTRL_IECHOADJ_DEF     0x4FBB
+
+#define MIIDBG_SRDSYSMOD                0x05
+#define SRDSYSMOD_LCKDET_EN             0x2000
+#define SRDSYSMOD_PLL_EN                0x800
+#define SRDSYSMOD_SEL_HSP               0x400
+#define SRDSYSMOD_HLFTXDR               0x200
+#define SRDSYSMOD_TXCLK_DELAY_EN        0x100
+#define SRDSYSMOD_TXELECIDLE            0x80
+#define SRDSYSMOD_DEEMP_EN              0x40
+#define SRDSYSMOD_MS_PAD                0x4
+#define SRDSYSMOD_CDR_ADC_VLTG          0x2
+#define SRDSYSMOD_CDR_DAC_1MA           0x1
+#define SRDSYSMOD_DEF                   0x2C46
+
+#define MIIDBG_CFGLPSPD                 0x0A
+#define CFGLPSPD_RSTCNT_MASK            3U
+#define CFGLPSPD_RSTCNT_SHIFT           14
+#define CFGLPSPD_RSTCNT_CLK125SW        0x2000
+
+#define MIIDBG_HIBNEG                   0x0B
+#define HIBNEG_PSHIB_EN                 0x8000
+#define HIBNEG_WAKE_BOTH                0x4000
+#define HIBNEG_ONOFF_ANACHG_SUDEN       0x2000
+#define HIBNEG_HIB_PULSE                0x1000
+#define HIBNEG_GATE_25M_EN              0x800
+#define HIBNEG_RST_80U                  0x400
+#define HIBNEG_RST_TIMER_MASK           3U
+#define HIBNEG_RST_TIMER_SHIFT          8
+#define HIBNEG_GTX_CLK_DELAY_MASK       3U
+#define HIBNEG_GTX_CLK_DELAY_SHIFT      5
+#define HIBNEG_BYPSS_BRKTIMER           0x10
+#define HIBNEG_DEF                      0xBC40
+
+#define MIIDBG_TST10BTCFG               0x12
+#define TST10BTCFG_INTV_TIMER_MASK      3U
+#define TST10BTCFG_INTV_TIMER_SHIFT     14
+#define TST10BTCFG_TRIGER_TIMER_MASK    3U
+#define TST10BTCFG_TRIGER_TIMER_SHIFT   12
+#define TST10BTCFG_DIV_MAN_MLT3_EN      0x800
+#define TST10BTCFG_OFF_DAC_IDLE         0x400
+#define TST10BTCFG_LPBK_DEEP            0x4 /* 1:deep,0:shallow */
+#define TST10BTCFG_DEF                  0x4C04
+
+#define MIIDBG_AZ_ANADECT              0x15
+#define AZ_ANADECT_10BTRX_TH           0x8000
+#define AZ_ANADECT_BOTH_01CHNL         0x4000
+#define AZ_ANADECT_INTV_MASK           0x3FU
+#define AZ_ANADECT_INTV_SHIFT          8
+#define AZ_ANADECT_THRESH_MASK         0xFU
+#define AZ_ANADECT_THRESH_SHIFT                4
+#define AZ_ANADECT_CHNL_MASK           0xFU
+#define AZ_ANADECT_CHNL_SHIFT          0
+#define AZ_ANADECT_DEF                 0x3220
+#define AZ_ANADECT_LONG                 0xb210
+
+#define MIIDBG_MSE16DB                 0x18    /* l1d */
+#define L1D_MSE16DB_UP                 0x05EA
+#define L1D_MSE16DB_DOWN               0x02EA
+
+#define MIIDBG_LEGCYPS                  0x29
+#define LEGCYPS_EN                      0x8000
+#define LEGCYPS_DAC_AMP1000_MASK        7U
+#define LEGCYPS_DAC_AMP1000_SHIFT       12
+#define LEGCYPS_DAC_AMP100_MASK         7U
+#define LEGCYPS_DAC_AMP100_SHIFT        9
+#define LEGCYPS_DAC_AMP10_MASK          7U
+#define LEGCYPS_DAC_AMP10_SHIFT         6
+#define LEGCYPS_UNPLUG_TIMER_MASK       7U
+#define LEGCYPS_UNPLUG_TIMER_SHIFT      3
+#define LEGCYPS_UNPLUG_DECT_EN          0x4
+#define LEGCYPS_ECNC_PS_EN              0x1
+#define L1D_LEGCYPS_DEF                 0x129D
+#define L1C_LEGCYPS_DEF                 0x36DD
+
+#define MIIDBG_TST100BTCFG              0x36
+#define TST100BTCFG_NORMAL_BW_EN        0x8000
+#define TST100BTCFG_BADLNK_BYPASS       0x4000
+#define TST100BTCFG_SHORTCABL_TH_MASK   0x3FU
+#define TST100BTCFG_SHORTCABL_TH_SHIFT  8
+#define TST100BTCFG_LITCH_EN            0x80
+#define TST100BTCFG_VLT_SW              0x40
+#define TST100BTCFG_LONGCABL_TH_MASK    0x3FU
+#define TST100BTCFG_LONGCABL_TH_SHIFT   0
+#define TST100BTCFG_DEF                 0xE12C
+
+#define MIIDBG_VOLT_CTRL                0x3B   /* only for l2cb 1 & 2 */
+#define VOLT_CTRL_CABLE1TH_MASK         0x1FFU
+#define VOLT_CTRL_CABLE1TH_SHIFT        7
+#define VOLT_CTRL_AMPCTRL_MASK          3U
+#define VOLT_CTRL_AMPCTRL_SHIFT         5
+#define VOLT_CTRL_SW_BYPASS             0x10
+#define VOLT_CTRL_SWLOWEST              0x8
+#define VOLT_CTRL_DACAMP10_MASK         7U
+#define VOLT_CTRL_DACAMP10_SHIFT        0
+
+#define MIIDBG_CABLE1TH_DET             0x3E
+#define CABLE1TH_DET_EN                 0x8000
+
+
+/******* dev 3 *********/
+#define MIIEXT_PCS                      3
+
+#define MIIEXT_CLDCTRL3                 0x8003
+#define CLDCTRL3_BP_CABLE1TH_DET_GT     0x8000
+#define CLDCTRL3_AZ_DISAMP              0x1000
+#define L2CB_CLDCTRL3                   0x4D19
+#define L1D_CLDCTRL3                    0xDD19
+
+#define MIIEXT_CLDCTRL6                        0x8006
+#define CLDCTRL6_CAB_LEN_MASK          0x1FFU
+#define CLDCTRL6_CAB_LEN_SHIFT          0
+#define CLDCTRL6_CAB_LEN_SHORT          0x50
+
+/********* dev 7 **********/
+#define MIIEXT_ANEG                     7
+
+#define MIIEXT_LOCAL_EEEADV             0x3C
+#define LOCAL_EEEADV_1000BT             0x4
+#define LOCAL_EEEADV_100BT              0x2
+
+#define MIIEXT_REMOTE_EEEADV            0x3D
+#define REMOTE_EEEADV_1000BT            0x4
+#define REMOTE_EEEADV_100BT             0x2
+
+#define MIIEXT_EEE_ANEG                 0x8000
+#define EEE_ANEG_1000M                  0x4
+#define EEE_ANEG_100M                   0x2
 
 #endif /*_ATL1C_HW_H_*/
index 8a1d2f90eb1a4514507fe992a4ed45c6e51fc2fa..995da221fc5acdbc6707b92c8758c83d9fb4f6ee 100644 (file)
@@ -2314,6 +2314,7 @@ static int atl1c_suspend(struct device *dev)
        u32 wol_ctrl_data = 0;
        u16 mii_intr_status_data = 0;
        u32 wufc = adapter->wol;
+       u32 phy_ctrl_data;
 
        atl1c_disable_l0s_l1(hw);
        if (netif_running(netdev)) {
@@ -2328,6 +2329,7 @@ static int atl1c_suspend(struct device *dev)
 
        AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data);
        AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data);
+       AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data);
 
        master_ctrl_data &= ~MASTER_CTRL_CLK_SEL_DIS;
        mac_ctrl_data &= ~(MAC_CTRL_PRMLEN_MASK << MAC_CTRL_PRMLEN_SHIFT);
@@ -2336,9 +2338,13 @@ static int atl1c_suspend(struct device *dev)
                        MAC_CTRL_PRMLEN_SHIFT);
        mac_ctrl_data &= ~(MAC_CTRL_SPEED_MASK << MAC_CTRL_SPEED_SHIFT);
        mac_ctrl_data &= ~MAC_CTRL_DUPLX;
+       phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS);
+       phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE |
+                       GPHY_CTRL_HIB_EN;
 
        if (wufc) {
                mac_ctrl_data |= MAC_CTRL_RX_EN;
+               phy_ctrl_data |= GPHY_CTRL_EXT_RESET;
                if (adapter->link_speed == SPEED_1000 ||
                        adapter->link_speed == SPEED_0) {
                        mac_ctrl_data |= atl1c_mac_speed_1000 <<
@@ -2381,23 +2387,20 @@ static int atl1c_suspend(struct device *dev)
                dev_dbg(&pdev->dev,
                        "%s: suspend MAC=0x%x\n",
                        atl1c_driver_name, mac_ctrl_data);
-               AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
-               AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
-               AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
-
-               AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT |
-                       GPHY_CTRL_EXT_RESET);
        } else {
-               AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_POWER_SAVING);
                master_ctrl_data |= MASTER_CTRL_CLK_SEL_DIS;
                mac_ctrl_data |= atl1c_mac_speed_10_100 << MAC_CTRL_SPEED_SHIFT;
                mac_ctrl_data |= MAC_CTRL_DUPLX;
-               AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
-               AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
-               AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+               phy_ctrl_data |= GPHY_CTRL_PHY_IDDQ | GPHY_CTRL_PWDOWN_HW;
+               wol_ctrl_data = 0;
                hw->phy_configured = false; /* re-init PHY when resume */
        }
 
+       AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
+       AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+       AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
+       AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
+
        return 0;
 }