#define IOCTL_BCM_FLASH2X_SECTION_WRITE _IOW(BCM_IOCTL, 0x866, int)
#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL, 0x867, int)
#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL, 0x868, int)
-#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL, 0x869)
+#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL, 0x869)
#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870, int)
-#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
+#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int)
#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int)
#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int)
};
enum bcm_flash2x_section_val {
- NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */
+ NO_SECTION_VAL = 0, /* no section chosen when absolute offset is given for RD/WR */
ISO_IMAGE1,
ISO_IMAGE2,
DSD0,
* Structure used for READ/WRITE Flash Map2.x
*/
struct bcm_flash2x_readwrite {
- enum bcm_flash2x_section_val Section; /* which section has to be read/written */
- u32 offset; /* Offset within Section. */
- u32 numOfBytes; /* NOB from the offset */
+ enum bcm_flash2x_section_val Section; /* section to be read/written */
+ u32 offset; /* offset within section. */
+ u32 numOfBytes; /* number of bytes from the offset */
u32 bVerify;
- void __user *pDataBuff; /* Buffer for reading/writing */
+ void __user *pDataBuff; /* buffer for reading/writing */
};
/*
};
enum {
- WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
- HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
+ WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
+ HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
MAX_IDX
};
struct bcm_gpio_multi_info {
unsigned int uiGPIOCommand; /* 1 for set and 0 for get */
- unsigned int uiGPIOMask; /* set the correspondig bit to 1 to access GPIO */
- unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
+ unsigned int uiGPIOMask; /* set the corresponding bit to 1 to access GPIO */
+ unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
} __packed;
struct bcm_gpio_multi_mode {
- unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
- unsigned int uiGPIOMask; /* GPIO mask to set mode */
+ unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
+ unsigned int uiGPIOMask; /* GPIO mask to set mode */
} __packed;
#endif