mmc: require explicit support for high-speed
authorPierre Ossman <drzeus@drzeus.cx>
Sun, 18 Feb 2007 11:07:47 +0000 (12:07 +0100)
committerPierre Ossman <drzeus@drzeus.cx>
Tue, 6 Mar 2007 12:26:55 +0000 (13:26 +0100)
The new high-speed timings are similar to each other and the old
system, but not identical. And although things "just work" most of
the time, sometimes it does not. So we need to start marking which
hosts are known to fully comply with the new timings.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
drivers/mmc/mmc.c
drivers/mmc/sdhci.c
include/linux/mmc/host.h

index 5046a1661342f2e13ac8417c14ed697163368390..4a73e8b2428d8e3d61f21c1bcc990aa23ce4f976 100644 (file)
@@ -376,10 +376,11 @@ static inline void mmc_set_ios(struct mmc_host *host)
 {
        struct mmc_ios *ios = &host->ios;
 
-       pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
+       pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
+               "width %u timing %u\n",
                 mmc_hostname(host), ios->clock, ios->bus_mode,
                 ios->power_mode, ios->chip_select, ios->vdd,
-                ios->bus_width);
+                ios->bus_width, ios->timing);
 
        host->ops->set_ios(host, ios);
 }
@@ -809,6 +810,7 @@ static void mmc_power_up(struct mmc_host *host)
        host->ios.chip_select = MMC_CS_DONTCARE;
        host->ios.power_mode = MMC_POWER_UP;
        host->ios.bus_width = MMC_BUS_WIDTH_1;
+       host->ios.timing = MMC_TIMING_LEGACY;
        mmc_set_ios(host);
 
        mmc_delay(1);
@@ -828,6 +830,7 @@ static void mmc_power_off(struct mmc_host *host)
        host->ios.chip_select = MMC_CS_DONTCARE;
        host->ios.power_mode = MMC_POWER_OFF;
        host->ios.bus_width = MMC_BUS_WIDTH_1;
+       host->ios.timing = MMC_TIMING_LEGACY;
        mmc_set_ios(host);
 }
 
@@ -1112,46 +1115,50 @@ static void mmc_process_ext_csds(struct mmc_host *host)
                        continue;
                }
 
-               /* Activate highspeed support. */
-               cmd.opcode = MMC_SWITCH;
-               cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
-                         (EXT_CSD_HS_TIMING << 16) |
-                         (1 << 8) |
-                         EXT_CSD_CMD_SET_NORMAL;
-               cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+               if (host->caps & MMC_CAP_MMC_HIGHSPEED) {
+                       /* Activate highspeed support. */
+                       cmd.opcode = MMC_SWITCH;
+                       cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+                                 (EXT_CSD_HS_TIMING << 16) |
+                                 (1 << 8) |
+                                 EXT_CSD_CMD_SET_NORMAL;
+                       cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
 
-               err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
-               if (err != MMC_ERR_NONE) {
-                       printk("%s: failed to switch card to mmc v4 "
-                              "high-speed mode.\n",
-                              mmc_hostname(card->host));
-                       continue;
-               }
+                       err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+                       if (err != MMC_ERR_NONE) {
+                               printk("%s: failed to switch card to mmc v4 "
+                                      "high-speed mode.\n",
+                                      mmc_hostname(card->host));
+                               continue;
+                       }
 
-               mmc_card_set_highspeed(card);
+                       mmc_card_set_highspeed(card);
 
-               /* Check for host support for wide-bus modes. */
-               if (!(host->caps & MMC_CAP_4_BIT_DATA)) {
-                       continue;
+                       host->ios.timing = MMC_TIMING_SD_HS;
+                       mmc_set_ios(host);
                }
 
-               /* Activate 4-bit support. */
-               cmd.opcode = MMC_SWITCH;
-               cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
-                         (EXT_CSD_BUS_WIDTH << 16) |
-                         (EXT_CSD_BUS_WIDTH_4 << 8) |
-                         EXT_CSD_CMD_SET_NORMAL;
-               cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+               /* Check for host support for wide-bus modes. */
+               if (host->caps & MMC_CAP_4_BIT_DATA) {
+                       /* Activate 4-bit support. */
+                       cmd.opcode = MMC_SWITCH;
+                       cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+                                 (EXT_CSD_BUS_WIDTH << 16) |
+                                 (EXT_CSD_BUS_WIDTH_4 << 8) |
+                                 EXT_CSD_CMD_SET_NORMAL;
+                       cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
 
-               err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
-               if (err != MMC_ERR_NONE) {
-                       printk("%s: failed to switch card to "
-                              "mmc v4 4-bit bus mode.\n",
-                              mmc_hostname(card->host));
-                       continue;
-               }
+                       err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+                       if (err != MMC_ERR_NONE) {
+                               printk("%s: failed to switch card to "
+                                      "mmc v4 4-bit bus mode.\n",
+                                      mmc_hostname(card->host));
+                               continue;
+                       }
 
-               host->ios.bus_width = MMC_BUS_WIDTH_4;
+                       host->ios.bus_width = MMC_BUS_WIDTH_4;
+                       mmc_set_ios(host);
+               }
        }
 
        kfree(ext_csd);
@@ -1241,6 +1248,9 @@ static void mmc_read_switch_caps(struct mmc_host *host)
        unsigned char *status;
        struct scatterlist sg;
 
+       if (!(host->caps & MMC_CAP_SD_HIGHSPEED))
+               return;
+
        status = kmalloc(64, GFP_KERNEL);
        if (!status) {
                printk(KERN_WARNING "%s: Unable to allocate buffer for "
@@ -1332,6 +1342,9 @@ static void mmc_read_switch_caps(struct mmc_host *host)
                }
 
                mmc_card_set_highspeed(card);
+
+               host->ios.timing = MMC_TIMING_SD_HS;
+               mmc_set_ios(host);
        }
 
        kfree(status);
index 7522f76b15ec48db85c9c3091dfb4a933d2ca3ab..c52b167e85854e303bd32124fd68355c0d96bb25 100644 (file)
@@ -606,7 +606,6 @@ static void sdhci_finish_command(struct sdhci_host *host)
 static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 {
        int div;
-       u8 ctrl;
        u16 clk;
        unsigned long timeout;
 
@@ -615,13 +614,6 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 
        writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
 
-       ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
-       if (clock > 25000000)
-               ctrl |= SDHCI_CTRL_HISPD;
-       else
-               ctrl &= ~SDHCI_CTRL_HISPD;
-       writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
-
        if (clock == 0)
                goto out;
 
@@ -761,10 +753,17 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                sdhci_set_power(host, ios->vdd);
 
        ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+
        if (ios->bus_width == MMC_BUS_WIDTH_4)
                ctrl |= SDHCI_CTRL_4BITBUS;
        else
                ctrl &= ~SDHCI_CTRL_4BITBUS;
+
+       if (ios->timing == MMC_TIMING_SD_HS)
+               ctrl |= SDHCI_CTRL_HISPD;
+       else
+               ctrl &= ~SDHCI_CTRL_HISPD;
+
        writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
 
        mmiowb();
@@ -1274,6 +1273,9 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
        mmc->f_max = host->max_clk;
        mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK;
 
+       if (caps & SDHCI_CAN_DO_HISPD)
+               mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+
        mmc->ocr_avail = 0;
        if (caps & SDHCI_CAN_VDD_330)
                mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
@@ -1282,13 +1284,6 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
        if (caps & SDHCI_CAN_VDD_180)
                mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19;
 
-       if ((host->max_clk > 25000000) && !(caps & SDHCI_CAN_DO_HISPD)) {
-               printk(KERN_ERR "%s: Controller reports > 25 MHz base clock,"
-                       " but no high speed support.\n",
-                       host->slot_descr);
-               mmc->f_max = 25000000;
-       }
-
        if (mmc->ocr_avail == 0) {
                printk(KERN_ERR "%s: Hardware doesn't report any "
                        "support voltages.\n", host->slot_descr);
index 913e5752569f1c70f7c3cb6315af0d3514a22c92..bfcef8a1ad8b69e971baeff4b0341d0e53706b9b 100644 (file)
@@ -62,6 +62,12 @@ struct mmc_ios {
 
 #define MMC_BUS_WIDTH_1                0
 #define MMC_BUS_WIDTH_4                2
+
+       unsigned char   timing;                 /* timing specification used */
+
+#define MMC_TIMING_LEGACY      0
+#define MMC_TIMING_MMC_HS      1
+#define MMC_TIMING_SD_HS       2
 };
 
 struct mmc_host_ops {
@@ -87,6 +93,8 @@ struct mmc_host {
 #define MMC_CAP_4_BIT_DATA     (1 << 0)        /* Can the host do 4 bit transfers */
 #define MMC_CAP_MULTIWRITE     (1 << 1)        /* Can accurately report bytes sent to card on error */
 #define MMC_CAP_BYTEBLOCK      (1 << 2)        /* Can do non-log2 block sizes */
+#define MMC_CAP_MMC_HIGHSPEED  (1 << 3)        /* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED   (1 << 4)        /* Can do SD high-speed timing */
 
        /* host specific block data */
        unsigned int            max_seg_size;   /* see blk_queue_max_segment_size */