drm/i915: Clean up cursor junk from intel_crtc
authorVille Syrjälä <ville.syrjala@linux.intel.com>
Mon, 27 Mar 2017 18:55:35 +0000 (21:55 +0300)
committerVille Syrjälä <ville.syrjala@linux.intel.com>
Wed, 10 May 2017 16:03:00 +0000 (19:03 +0300)
Move cursor_base, cursor_cntl, and cursor_size from intel_crtc
into intel_plane so that we don't need the crtc for cursor stuff
so much.

Also entirely nuke cursor_addr which IMO doesn't provide any benefit
since it's not actually used by the cursor code itself. I'm not 100%
sure what the SKL+ DDB is code is after by looking at cursor_addr so
I just make it do its checks unconditionally. If that's not correct
then we should likely replace it with somehting like
plane_state->visible.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
drivers/gpu/drm/i915/i915_debugfs.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h

index b302c7bacb3dc12d22e7f603802e775d7a366f24..78303379a200f33e27fb6d8c9935e49b88a664d6 100644 (file)
@@ -3042,36 +3042,6 @@ static void intel_connector_info(struct seq_file *m,
                intel_seq_print_mode(m, 2, mode);
 }
 
-static bool cursor_active(struct drm_i915_private *dev_priv, int pipe)
-{
-       u32 state;
-
-       if (IS_I845G(dev_priv) || IS_I865G(dev_priv))
-               state = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE;
-       else
-               state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
-
-       return state;
-}
-
-static bool cursor_position(struct drm_i915_private *dev_priv,
-                           int pipe, int *x, int *y)
-{
-       u32 pos;
-
-       pos = I915_READ(CURPOS(pipe));
-
-       *x = (pos >> CURSOR_X_SHIFT) & CURSOR_POS_MASK;
-       if (pos & (CURSOR_POS_SIGN << CURSOR_X_SHIFT))
-               *x = -*x;
-
-       *y = (pos >> CURSOR_Y_SHIFT) & CURSOR_POS_MASK;
-       if (pos & (CURSOR_POS_SIGN << CURSOR_Y_SHIFT))
-               *y = -*y;
-
-       return cursor_active(dev_priv, pipe);
-}
-
 static const char *plane_type(enum drm_plane_type type)
 {
        switch (type) {
@@ -3193,9 +3163,7 @@ static int i915_display_info(struct seq_file *m, void *unused)
        seq_printf(m, "CRTC info\n");
        seq_printf(m, "---------\n");
        for_each_intel_crtc(dev, crtc) {
-               bool active;
                struct intel_crtc_state *pipe_config;
-               int x, y;
 
                drm_modeset_lock(&crtc->base.mutex, NULL);
                pipe_config = to_intel_crtc_state(crtc->base.state);
@@ -3207,14 +3175,18 @@ static int i915_display_info(struct seq_file *m, void *unused)
                           yesno(pipe_config->dither), pipe_config->pipe_bpp);
 
                if (pipe_config->base.active) {
+                       struct intel_plane *cursor =
+                               to_intel_plane(crtc->base.cursor);
+
                        intel_crtc_info(m, crtc);
 
-                       active = cursor_position(dev_priv, crtc->pipe, &x, &y);
-                       seq_printf(m, "\tcursor visible? %s, position (%d, %d), size %dx%d, addr 0x%08x, active? %s\n",
-                                  yesno(crtc->cursor_base),
-                                  x, y, crtc->base.cursor->state->crtc_w,
-                                  crtc->base.cursor->state->crtc_h,
-                                  crtc->cursor_addr, yesno(active));
+                       seq_printf(m, "\tcursor visible? %s, position (%d, %d), size %dx%d, addr 0x%08x\n",
+                                  yesno(cursor->base.state->visible),
+                                  cursor->base.state->crtc_x,
+                                  cursor->base.state->crtc_y,
+                                  cursor->base.state->crtc_w,
+                                  cursor->base.state->crtc_h,
+                                  cursor->cursor.base);
                        intel_scaler_info(m, crtc);
                        intel_plane_info(m, crtc);
                }
index 6e0a5796b71c7bbbbef83f5d2592ffbb54579f06..bbc202297cb6a1c32561d477fa5b780a838987ee 100644 (file)
@@ -9135,8 +9135,7 @@ out:
        return active;
 }
 
-static u32 intel_cursor_base(struct intel_crtc *crtc,
-                            const struct intel_plane_state *plane_state)
+static u32 intel_cursor_base(const struct intel_plane_state *plane_state)
 {
        struct drm_i915_private *dev_priv =
                to_i915(plane_state->base.plane->dev);
@@ -9149,8 +9148,6 @@ static u32 intel_cursor_base(struct intel_crtc *crtc,
        else
                base = intel_plane_ggtt_offset(plane_state);
 
-       crtc->cursor_addr = base;
-
        /* ILK+ do this automagically */
        if (HAS_GMCH_DISPLAY(dev_priv) &&
            plane_state->base.rotation & DRM_ROTATE_180)
@@ -9185,12 +9182,10 @@ static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,
                CURSOR_STRIDE(stride);
 }
 
-static void i845_update_cursor(struct drm_crtc *crtc, u32 base,
+static void i845_update_cursor(struct intel_plane *plane, u32 base,
                               const struct intel_plane_state *plane_state)
 {
-       struct drm_device *dev = crtc->dev;
-       struct drm_i915_private *dev_priv = to_i915(dev);
-       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+       struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
        uint32_t cntl = 0, size = 0;
 
        if (plane_state && plane_state->base.visible) {
@@ -9201,32 +9196,32 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base,
                size = (height << 12) | width;
        }
 
-       if (intel_crtc->cursor_cntl != 0 &&
-           (intel_crtc->cursor_base != base ||
-            intel_crtc->cursor_size != size ||
-            intel_crtc->cursor_cntl != cntl)) {
+       if (plane->cursor.cntl != 0 &&
+           (plane->cursor.base != base ||
+            plane->cursor.size != size ||
+            plane->cursor.cntl != cntl)) {
                /* On these chipsets we can only modify the base/size/stride
                 * whilst the cursor is disabled.
                 */
                I915_WRITE_FW(CURCNTR(PIPE_A), 0);
                POSTING_READ_FW(CURCNTR(PIPE_A));
-               intel_crtc->cursor_cntl = 0;
+               plane->cursor.cntl = 0;
        }
 
-       if (intel_crtc->cursor_base != base) {
+       if (plane->cursor.base != base) {
                I915_WRITE_FW(CURBASE(PIPE_A), base);
-               intel_crtc->cursor_base = base;
+               plane->cursor.base = base;
        }
 
-       if (intel_crtc->cursor_size != size) {
+       if (plane->cursor.size != size) {
                I915_WRITE_FW(CURSIZE, size);
-               intel_crtc->cursor_size = size;
+               plane->cursor.size = size;
        }
 
-       if (intel_crtc->cursor_cntl != cntl) {
+       if (plane->cursor.cntl != cntl) {
                I915_WRITE_FW(CURCNTR(PIPE_A), cntl);
                POSTING_READ_FW(CURCNTR(PIPE_A));
-               intel_crtc->cursor_cntl = cntl;
+               plane->cursor.cntl = cntl;
        }
 }
 
@@ -9266,39 +9261,35 @@ static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,
        return cntl;
 }
 
-static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base,
+static void i9xx_update_cursor(struct intel_plane *plane, u32 base,
                               const struct intel_plane_state *plane_state)
 {
-       struct drm_device *dev = crtc->dev;
-       struct drm_i915_private *dev_priv = to_i915(dev);
-       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-       int pipe = intel_crtc->pipe;
+       struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+       enum pipe pipe = plane->pipe;
        uint32_t cntl = 0;
 
        if (plane_state && plane_state->base.visible)
                cntl = plane_state->ctl;
 
-       if (intel_crtc->cursor_cntl != cntl) {
+       if (plane->cursor.cntl != cntl) {
                I915_WRITE_FW(CURCNTR(pipe), cntl);
                POSTING_READ_FW(CURCNTR(pipe));
-               intel_crtc->cursor_cntl = cntl;
+               plane->cursor.cntl = cntl;
        }
 
        /* and commit changes on next vblank */
        I915_WRITE_FW(CURBASE(pipe), base);
        POSTING_READ_FW(CURBASE(pipe));
 
-       intel_crtc->cursor_base = base;
+       plane->cursor.base = base;
 }
 
 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
-static void intel_crtc_update_cursor(struct drm_crtc *crtc,
+static void intel_crtc_update_cursor(struct intel_plane *plane,
                                     const struct intel_plane_state *plane_state)
 {
-       struct drm_device *dev = crtc->dev;
-       struct drm_i915_private *dev_priv = to_i915(dev);
-       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-       int pipe = intel_crtc->pipe;
+       struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+       enum pipe pipe = plane->pipe;
        u32 pos = 0, base = 0;
        unsigned long irqflags;
 
@@ -9318,9 +9309,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
                }
                pos |= y << CURSOR_Y_SHIFT;
 
-               base = intel_cursor_base(intel_crtc, plane_state);
-       } else {
-               intel_crtc->cursor_addr = 0;
+               base = intel_cursor_base(plane_state);
        }
 
        spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
@@ -9328,9 +9317,9 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
        I915_WRITE_FW(CURPOS(pipe), pos);
 
        if (IS_I845G(dev_priv) || IS_I865G(dev_priv))
-               i845_update_cursor(crtc, base, plane_state);
+               i845_update_cursor(plane, base, plane_state);
        else
-               i9xx_update_cursor(crtc, base, plane_state);
+               i9xx_update_cursor(plane, base, plane_state);
 
        spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
 }
@@ -11892,7 +11881,7 @@ static void verify_wm_state(struct drm_crtc *crtc,
         * allocation. In that case since the ddb allocation will be updated
         * once the plane becomes visible, we can skip this check
         */
-       if (intel_crtc->cursor_addr) {
+       if (1) {
                hw_plane_wm = &hw_wm.planes[PLANE_CURSOR];
                sw_plane_wm = &sw_wm->planes[PLANE_CURSOR];
 
@@ -13734,7 +13723,7 @@ static void
 intel_disable_cursor_plane(struct intel_plane *plane,
                           struct intel_crtc *crtc)
 {
-       intel_crtc_update_cursor(&crtc->base, NULL);
+       intel_crtc_update_cursor(plane, NULL);
 }
 
 static void
@@ -13742,9 +13731,7 @@ intel_update_cursor_plane(struct intel_plane *plane,
                          const struct intel_crtc_state *crtc_state,
                          const struct intel_plane_state *state)
 {
-       struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
-
-       intel_crtc_update_cursor(&crtc->base, state);
+       intel_crtc_update_cursor(plane, state);
 }
 
 static struct intel_plane *
@@ -13778,6 +13765,10 @@ intel_cursor_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
        cursor->update_plane = intel_update_cursor_plane;
        cursor->disable_plane = intel_disable_cursor_plane;
 
+       cursor->cursor.base = ~0;
+       cursor->cursor.cntl = ~0;
+       cursor->cursor.size = ~0;
+
        ret = drm_universal_plane_init(&dev_priv->drm, &cursor->base,
                                       0, &intel_cursor_plane_funcs,
                                       intel_cursor_formats,
@@ -13885,10 +13876,6 @@ static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
        intel_crtc->pipe = pipe;
        intel_crtc->plane = primary->plane;
 
-       intel_crtc->cursor_base = ~0;
-       intel_crtc->cursor_cntl = ~0;
-       intel_crtc->cursor_size = ~0;
-
        /* initialize shared scalers */
        intel_crtc_init_scalers(intel_crtc, crtc_state);
 
index f922e0489809098596b8cc26d65fddb4b0dc125b..cc1370686193e8663d437393d00637566e564f48 100644 (file)
@@ -799,11 +799,6 @@ struct intel_crtc {
        int adjusted_x;
        int adjusted_y;
 
-       uint32_t cursor_addr;
-       uint32_t cursor_cntl;
-       uint32_t cursor_size;
-       uint32_t cursor_base;
-
        struct intel_crtc_state *config;
 
        /* global reset count when the last flip was submitted */
@@ -845,6 +840,10 @@ struct intel_plane {
        int max_downscale;
        uint32_t frontbuffer_bit;
 
+       struct {
+               u32 base, cntl, size;
+       } cursor;
+
        /*
         * NOTE: Do not place new plane state fields here (e.g., when adding
         * new plane properties).  New runtime state should now be placed in