source "drivers/staging/media/Kconfig"
+source "drivers/staging/omapdrm/Kconfig"
+
endif # STAGING
obj-$(CONFIG_DRM_PSB) += gma500/
obj-$(CONFIG_INTEL_MEI) += mei/
obj-$(CONFIG_MFD_NVEC) += nvec/
+obj-$(CONFIG_DRM_OMAP) += omapdrm/
--- /dev/null
+
+config DRM_OMAP
+ tristate "OMAP DRM"
+ depends on DRM && !CONFIG_FB_OMAP2
+ depends on ARCH_OMAP2PLUS
+ select DRM_KMS_HELPER
+ select OMAP2_DSS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ default n
+ help
+ DRM display driver for OMAP2/3/4 based boards.
+
+config DRM_OMAP_NUM_CRTCS
+ int "Number of CRTCs"
+ range 1 10
+ default 1 if ARCH_OMAP2 || ARCH_OMAP3
+ default 2 if ARCH_OMAP4
+ depends on DRM_OMAP
+ help
+ Select the number of video overlays which can be used as framebuffers.
+ The remaining overlays are reserved for video.
+
--- /dev/null
+#
+# Makefile for the drm device driver. This driver provides support for the
+# Direct Rendering Infrastructure (DRI)
+#
+
+ccflags-y := -Iinclude/drm -Werror
+omapdrm-y := omap_drv.o omap_crtc.o omap_encoder.o omap_connector.o omap_fb.o omap_fbdev.o omap_gem.o
+
+# temporary:
+omapdrm-y += omap_gem_helpers.o
+
+obj-$(CONFIG_DRM_OMAP) += omapdrm.o
--- /dev/null
+TODO
+. check error handling/cleanup paths
+. add drm_plane / overlay support
+. add video decode/encode support (via syslink3 + codec-engine)
+. still some rough edges with flipping.. event back to userspace should
+ really come after VSYNC interrupt
+. where should we do eviction (detatch_pages())? We aren't necessarily
+ accessing the pages via a GART, so maybe we need some other threshold
+ to put a cap on the # of pages that can be pin'd. (It is mostly only
+ of interest in case you have a swap partition/file.. which a lot of
+ these devices do not.. but it doesn't hurt for the driver to do the
+ right thing anyways.)
+ . Use mm_shrinker to trigger unpinning pages. Need to figure out how
+ to handle next issue first (I think?)
+ . Note TTM already has some mm_shrinker stuff.. maybe an argument to
+ move to TTM? Or maybe something that could be factored out in common?
+. GEM/shmem backed pages can have existing mappings (kernel linear map,
+ etc..), which isn't really ideal.
+. Revisit GEM sync object infrastructure.. TTM has some framework for this
+ already. Possibly this could be refactored out and made more common?
+ There should be some way to do this with less wheel-reinvention.
+. Review DSS vs KMS mismatches. The omap_dss_device is sort of part encoder,
+ part connector. Which results in a bit of duct tape to fwd calls from
+ encoder to connector. Possibly this could be done a bit better.
+
+Userspace:
+. git://github.com/robclark/xf86-video-omap.git
+
+Currently tested on
+. OMAP3530 beagleboard
+. OMAP4430 pandaboard
+. OMAP4460 pandaboard
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_connector.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+/*
+ * connector funcs
+ */
+
+#define to_omap_connector(x) container_of(x, struct omap_connector, base)
+
+struct omap_connector {
+ struct drm_connector base;
+ struct omap_dss_device *dssdev;
+};
+
+static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode,
+ struct omap_video_timings *timings)
+{
+ mode->clock = timings->pixel_clock;
+
+ mode->hdisplay = timings->x_res;
+ mode->hsync_start = mode->hdisplay + timings->hfp;
+ mode->hsync_end = mode->hsync_start + timings->hsw;
+ mode->htotal = mode->hsync_end + timings->hbp;
+
+ mode->vdisplay = timings->y_res;
+ mode->vsync_start = mode->vdisplay + timings->vfp;
+ mode->vsync_end = mode->vsync_start + timings->vsw;
+ mode->vtotal = mode->vsync_end + timings->vbp;
+
+ /* note: whether or not it is interlaced, +/- h/vsync, etc,
+ * which should be set in the mode flags, is not exposed in
+ * the omap_video_timings struct.. but hdmi driver tracks
+ * those separately so all we have to have to set the mode
+ * is the way to recover these timings values, and the
+ * omap_dss_driver would do the rest.
+ */
+}
+
+static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings,
+ struct drm_display_mode *mode)
+{
+ timings->pixel_clock = mode->clock;
+
+ timings->x_res = mode->hdisplay;
+ timings->hfp = mode->hsync_start - mode->hdisplay;
+ timings->hsw = mode->hsync_end - mode->hsync_start;
+ timings->hbp = mode->htotal - mode->hsync_end;
+
+ timings->y_res = mode->vdisplay;
+ timings->vfp = mode->vsync_start - mode->vdisplay;
+ timings->vsw = mode->vsync_end - mode->vsync_start;
+ timings->vbp = mode->vtotal - mode->vsync_end;
+}
+
+static void omap_connector_dpms(struct drm_connector *connector, int mode)
+{
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+ struct omap_dss_device *dssdev = omap_connector->dssdev;
+ int old_dpms;
+
+ DBG("%s: %d", dssdev->name, mode);
+
+ old_dpms = connector->dpms;
+
+ /* from off to on, do from crtc to connector */
+ if (mode < old_dpms)
+ drm_helper_connector_dpms(connector, mode);
+
+ if (mode == DRM_MODE_DPMS_ON) {
+ /* store resume info for suspended displays */
+ switch (dssdev->state) {
+ case OMAP_DSS_DISPLAY_SUSPENDED:
+ dssdev->activate_after_resume = true;
+ break;
+ case OMAP_DSS_DISPLAY_DISABLED: {
+ int ret = dssdev->driver->enable(dssdev);
+ if (ret) {
+ DBG("%s: failed to enable: %d",
+ dssdev->name, ret);
+ dssdev->driver->disable(dssdev);
+ }
+ break;
+ }
+ default:
+ break;
+ }
+ } else {
+ /* TODO */
+ }
+
+ /* from on to off, do from connector to crtc */
+ if (mode > old_dpms)
+ drm_helper_connector_dpms(connector, mode);
+}
+
+enum drm_connector_status omap_connector_detect(
+ struct drm_connector *connector, bool force)
+{
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+ struct omap_dss_device *dssdev = omap_connector->dssdev;
+ struct omap_dss_driver *dssdrv = dssdev->driver;
+ enum drm_connector_status ret;
+
+ if (dssdrv->detect) {
+ if (dssdrv->detect(dssdev)) {
+ ret = connector_status_connected;
+ } else {
+ ret = connector_status_disconnected;
+ }
+ } else {
+ ret = connector_status_unknown;
+ }
+
+ VERB("%s: %d (force=%d)", omap_connector->dssdev->name, ret, force);
+
+ return ret;
+}
+
+static void omap_connector_destroy(struct drm_connector *connector)
+{
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+ struct omap_dss_device *dssdev = omap_connector->dssdev;
+
+ dssdev->driver->disable(dssdev);
+
+ DBG("%s", omap_connector->dssdev->name);
+ drm_sysfs_connector_remove(connector);
+ drm_connector_cleanup(connector);
+ kfree(omap_connector);
+
+ omap_dss_put_device(dssdev);
+}
+
+#define MAX_EDID 512
+
+static int omap_connector_get_modes(struct drm_connector *connector)
+{
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+ struct omap_dss_device *dssdev = omap_connector->dssdev;
+ struct omap_dss_driver *dssdrv = dssdev->driver;
+ struct drm_device *dev = connector->dev;
+ int n = 0;
+
+ DBG("%s", omap_connector->dssdev->name);
+
+ /* if display exposes EDID, then we parse that in the normal way to
+ * build table of supported modes.. otherwise (ie. fixed resolution
+ * LCD panels) we just return a single mode corresponding to the
+ * currently configured timings:
+ */
+ if (dssdrv->read_edid) {
+ void *edid = kzalloc(MAX_EDID, GFP_KERNEL);
+
+ if ((dssdrv->read_edid(dssdev, edid, MAX_EDID) > 0) &&
+ drm_edid_is_valid(edid)) {
+ drm_mode_connector_update_edid_property(
+ connector, edid);
+ n = drm_add_edid_modes(connector, edid);
+ kfree(connector->display_info.raw_edid);
+ connector->display_info.raw_edid = edid;
+ } else {
+ drm_mode_connector_update_edid_property(
+ connector, NULL);
+ connector->display_info.raw_edid = NULL;
+ kfree(edid);
+ }
+ } else {
+ struct drm_display_mode *mode = drm_mode_create(dev);
+ struct omap_video_timings timings;
+
+ dssdrv->get_timings(dssdev, &timings);
+
+ copy_timings_omap_to_drm(mode, &timings);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+
+ n = 1;
+ }
+
+ return n;
+}
+
+static int omap_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+ struct omap_dss_device *dssdev = omap_connector->dssdev;
+ struct omap_dss_driver *dssdrv = dssdev->driver;
+ struct omap_video_timings timings = {0};
+ struct drm_device *dev = connector->dev;
+ struct drm_display_mode *new_mode;
+ int ret = MODE_BAD;
+
+ copy_timings_drm_to_omap(&timings, mode);
+ mode->vrefresh = drm_mode_vrefresh(mode);
+
+ if (!dssdrv->check_timings(dssdev, &timings)) {
+ /* check if vrefresh is still valid */
+ new_mode = drm_mode_duplicate(dev, mode);
+ new_mode->clock = timings.pixel_clock;
+ new_mode->vrefresh = 0;
+ if (mode->vrefresh == drm_mode_vrefresh(new_mode))
+ ret = MODE_OK;
+ drm_mode_destroy(dev, new_mode);
+ }
+
+ DBG("connector: mode %s: "
+ "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
+ (ret == MODE_OK) ? "valid" : "invalid",
+ mode->base.id, mode->name, mode->vrefresh, mode->clock,
+ mode->hdisplay, mode->hsync_start,
+ mode->hsync_end, mode->htotal,
+ mode->vdisplay, mode->vsync_start,
+ mode->vsync_end, mode->vtotal, mode->type, mode->flags);
+
+ return ret;
+}
+
+struct drm_encoder *omap_connector_attached_encoder(
+ struct drm_connector *connector)
+{
+ int i;
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+
+ for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+ struct drm_mode_object *obj;
+
+ if (connector->encoder_ids[i] == 0)
+ break;
+
+ obj = drm_mode_object_find(connector->dev,
+ connector->encoder_ids[i],
+ DRM_MODE_OBJECT_ENCODER);
+
+ if (obj) {
+ struct drm_encoder *encoder = obj_to_encoder(obj);
+ struct omap_overlay_manager *mgr =
+ omap_encoder_get_manager(encoder);
+ DBG("%s: found %s", omap_connector->dssdev->name,
+ mgr->name);
+ return encoder;
+ }
+ }
+
+ DBG("%s: no encoder", omap_connector->dssdev->name);
+
+ return NULL;
+}
+
+static const struct drm_connector_funcs omap_connector_funcs = {
+ .dpms = omap_connector_dpms,
+ .detect = omap_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = omap_connector_destroy,
+};
+
+static const struct drm_connector_helper_funcs omap_connector_helper_funcs = {
+ .get_modes = omap_connector_get_modes,
+ .mode_valid = omap_connector_mode_valid,
+ .best_encoder = omap_connector_attached_encoder,
+};
+
+/* called from encoder when mode is set, to propagate settings to the dssdev */
+void omap_connector_mode_set(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct drm_device *dev = connector->dev;
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+ struct omap_dss_device *dssdev = omap_connector->dssdev;
+ struct omap_dss_driver *dssdrv = dssdev->driver;
+ struct omap_video_timings timings;
+
+ copy_timings_drm_to_omap(&timings, mode);
+
+ DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
+ omap_connector->dssdev->name,
+ mode->base.id, mode->name, mode->vrefresh, mode->clock,
+ mode->hdisplay, mode->hsync_start,
+ mode->hsync_end, mode->htotal,
+ mode->vdisplay, mode->vsync_start,
+ mode->vsync_end, mode->vtotal, mode->type, mode->flags);
+
+ if (dssdrv->check_timings(dssdev, &timings)) {
+ dev_err(dev->dev, "could not set timings\n");
+ return;
+ }
+
+ dssdrv->set_timings(dssdev, &timings);
+}
+
+/* flush an area of the framebuffer (in case of manual update display that
+ * is not automatically flushed)
+ */
+void omap_connector_flush(struct drm_connector *connector,
+ int x, int y, int w, int h)
+{
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+
+ /* TODO: enable when supported in dss */
+ VERB("%s: %d,%d, %dx%d", omap_connector->dssdev->name, x, y, w, h);
+}
+
+/* initialize connector */
+struct drm_connector *omap_connector_init(struct drm_device *dev,
+ int connector_type, struct omap_dss_device *dssdev)
+{
+ struct drm_connector *connector = NULL;
+ struct omap_connector *omap_connector;
+
+ DBG("%s", dssdev->name);
+
+ omap_dss_get_device(dssdev);
+
+ omap_connector = kzalloc(sizeof(struct omap_connector), GFP_KERNEL);
+ if (!omap_connector) {
+ dev_err(dev->dev, "could not allocate connector\n");
+ goto fail;
+ }
+
+ omap_connector->dssdev = dssdev;
+ connector = &omap_connector->base;
+
+ drm_connector_init(dev, connector, &omap_connector_funcs,
+ connector_type);
+ drm_connector_helper_add(connector, &omap_connector_helper_funcs);
+
+#if 0 /* enable when dss2 supports hotplug */
+ if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_HPD)
+ connector->polled = 0;
+ else
+#endif
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT;
+
+ connector->interlace_allowed = 1;
+ connector->doublescan_allowed = 0;
+
+ drm_sysfs_connector_add(connector);
+
+ return connector;
+
+fail:
+ if (connector) {
+ omap_connector_destroy(connector);
+ }
+
+ return NULL;
+}
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_crtc.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_mode.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+#define to_omap_crtc(x) container_of(x, struct omap_crtc, base)
+
+struct omap_crtc {
+ struct drm_crtc base;
+ struct omap_overlay *ovl;
+ struct omap_overlay_info info;
+ int id;
+
+ /* if there is a pending flip, this will be non-null: */
+ struct drm_pending_vblank_event *event;
+};
+
+/* push changes down to dss2 */
+static int commit(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct omap_overlay *ovl = omap_crtc->ovl;
+ struct omap_overlay_info *info = &omap_crtc->info;
+ int ret;
+
+ DBG("%s", omap_crtc->ovl->name);
+ DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width,
+ info->out_height, info->screen_width);
+ DBG("%d,%d %08x", info->pos_x, info->pos_y, info->paddr);
+
+ /* NOTE: do we want to do this at all here, or just wait
+ * for dpms(ON) since other CRTC's may not have their mode
+ * set yet, so fb dimensions may still change..
+ */
+ ret = ovl->set_overlay_info(ovl, info);
+ if (ret) {
+ dev_err(dev->dev, "could not set overlay info\n");
+ return ret;
+ }
+
+ /* our encoder doesn't necessarily get a commit() after this, in
+ * particular in the dpms() and mode_set_base() cases, so force the
+ * manager to update:
+ *
+ * could this be in the encoder somehow?
+ */
+ if (ovl->manager) {
+ ret = ovl->manager->apply(ovl->manager);
+ if (ret) {
+ dev_err(dev->dev, "could not apply settings\n");
+ return ret;
+ }
+ }
+
+ if (info->enabled) {
+ omap_framebuffer_flush(crtc->fb, crtc->x, crtc->y,
+ crtc->fb->width, crtc->fb->height);
+ }
+
+ return 0;
+}
+
+/* update parameters that are dependent on the framebuffer dimensions and
+ * position within the fb that this crtc scans out from. This is called
+ * when framebuffer dimensions or x,y base may have changed, either due
+ * to our mode, or a change in another crtc that is scanning out of the
+ * same fb.
+ */
+static void update_scanout(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ dma_addr_t paddr;
+ unsigned int screen_width;
+
+ omap_framebuffer_get_buffer(crtc->fb, crtc->x, crtc->y,
+ NULL, &paddr, &screen_width);
+
+ DBG("%s: %d,%d: %08x (%d)", omap_crtc->ovl->name,
+ crtc->x, crtc->y, (u32)paddr, screen_width);
+
+ omap_crtc->info.paddr = paddr;
+ omap_crtc->info.screen_width = screen_width;
+}
+
+static void omap_crtc_gamma_set(struct drm_crtc *crtc,
+ u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t size)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ DBG("%s", omap_crtc->ovl->name);
+}
+
+static void omap_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ DBG("%s", omap_crtc->ovl->name);
+ drm_crtc_cleanup(crtc);
+ kfree(omap_crtc);
+}
+
+static void omap_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+
+ DBG("%s: %d", omap_crtc->ovl->name, mode);
+
+ if (mode == DRM_MODE_DPMS_ON) {
+ update_scanout(crtc);
+ omap_crtc->info.enabled = true;
+ } else {
+ omap_crtc->info.enabled = false;
+ }
+
+ WARN_ON(commit(crtc));
+}
+
+static bool omap_crtc_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ DBG("%s", omap_crtc->ovl->name);
+ return true;
+}
+
+static int omap_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+
+ DBG("%s: %d,%d: %dx%d", omap_crtc->ovl->name, x, y,
+ mode->hdisplay, mode->vdisplay);
+
+ /* just use adjusted mode */
+ mode = adjusted_mode;
+
+ omap_crtc->info.width = mode->hdisplay;
+ omap_crtc->info.height = mode->vdisplay;
+ omap_crtc->info.out_width = mode->hdisplay;
+ omap_crtc->info.out_height = mode->vdisplay;
+ omap_crtc->info.color_mode = OMAP_DSS_COLOR_RGB24U;
+ omap_crtc->info.rotation_type = OMAP_DSS_ROT_DMA;
+ omap_crtc->info.rotation = OMAP_DSS_ROT_0;
+ omap_crtc->info.global_alpha = 0xff;
+ omap_crtc->info.mirror = 0;
+ omap_crtc->info.mirror = 0;
+ omap_crtc->info.pos_x = 0;
+ omap_crtc->info.pos_y = 0;
+#if 0 /* re-enable when these are available in DSS2 driver */
+ omap_crtc->info.zorder = 3; /* GUI in the front, video behind */
+ omap_crtc->info.min_x_decim = 1;
+ omap_crtc->info.max_x_decim = 1;
+ omap_crtc->info.min_y_decim = 1;
+ omap_crtc->info.max_y_decim = 1;
+#endif
+
+ update_scanout(crtc);
+
+ return 0;
+}
+
+static void omap_crtc_prepare(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct omap_overlay *ovl = omap_crtc->ovl;
+
+ DBG("%s", omap_crtc->ovl->name);
+
+ ovl->get_overlay_info(ovl, &omap_crtc->info);
+
+ omap_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void omap_crtc_commit(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ DBG("%s", omap_crtc->ovl->name);
+ omap_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+
+ DBG("%s %d,%d: fb=%p", omap_crtc->ovl->name, x, y, old_fb);
+
+ update_scanout(crtc);
+
+ return commit(crtc);
+}
+
+static void omap_crtc_load_lut(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ DBG("%s", omap_crtc->ovl->name);
+}
+
+static void page_flip_cb(void *arg)
+{
+ struct drm_crtc *crtc = arg;
+ struct drm_device *dev = crtc->dev;
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct drm_pending_vblank_event *event = omap_crtc->event;
+ struct timeval now;
+ unsigned long flags;
+
+ WARN_ON(!event);
+
+ omap_crtc->event = NULL;
+
+ update_scanout(crtc);
+ WARN_ON(commit(crtc));
+
+ /* wakeup userspace */
+ /* TODO: this should happen *after* flip in vsync IRQ handler */
+ if (event) {
+ spin_lock_irqsave(&dev->event_lock, flags);
+ event->event.sequence = drm_vblank_count_and_time(
+ dev, omap_crtc->id, &now);
+ event->event.tv_sec = now.tv_sec;
+ event->event.tv_usec = now.tv_usec;
+ list_add_tail(&event->base.link,
+ &event->base.file_priv->event_list);
+ wake_up_interruptible(&event->base.file_priv->event_wait);
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ }
+}
+
+static int omap_crtc_page_flip_locked(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event)
+{
+ struct drm_device *dev = crtc->dev;
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+
+ DBG("%d -> %d", crtc->fb ? crtc->fb->base.id : -1, fb->base.id);
+
+ if (omap_crtc->event) {
+ dev_err(dev->dev, "already a pending flip\n");
+ return -EINVAL;
+ }
+
+ crtc->fb = fb;
+ omap_crtc->event = event;
+
+ omap_gem_op_async(omap_framebuffer_bo(fb), OMAP_GEM_READ,
+ page_flip_cb, crtc);
+
+ return 0;
+}
+
+static const struct drm_crtc_funcs omap_crtc_funcs = {
+ .gamma_set = omap_crtc_gamma_set,
+ .set_config = drm_crtc_helper_set_config,
+ .destroy = omap_crtc_destroy,
+ .page_flip = omap_crtc_page_flip_locked,
+};
+
+static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = {
+ .dpms = omap_crtc_dpms,
+ .mode_fixup = omap_crtc_mode_fixup,
+ .mode_set = omap_crtc_mode_set,
+ .prepare = omap_crtc_prepare,
+ .commit = omap_crtc_commit,
+ .mode_set_base = omap_crtc_mode_set_base,
+ .load_lut = omap_crtc_load_lut,
+};
+
+struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ return omap_crtc->ovl;
+}
+
+/* initialize crtc */
+struct drm_crtc *omap_crtc_init(struct drm_device *dev,
+ struct omap_overlay *ovl, int id)
+{
+ struct drm_crtc *crtc = NULL;
+ struct omap_crtc *omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL);
+
+ DBG("%s", ovl->name);
+
+ if (!omap_crtc) {
+ dev_err(dev->dev, "could not allocate CRTC\n");
+ goto fail;
+ }
+
+ omap_crtc->ovl = ovl;
+ omap_crtc->id = id;
+ crtc = &omap_crtc->base;
+ drm_crtc_init(dev, crtc, &omap_crtc_funcs);
+ drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs);
+
+ return crtc;
+
+fail:
+ if (crtc) {
+ drm_crtc_cleanup(crtc);
+ kfree(omap_crtc);
+ }
+ return NULL;
+}
--- /dev/null
+/*
+ * include/drm/omap_drm.h
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_DRM_H__
+#define __OMAP_DRM_H__
+
+#include "drm.h"
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ */
+
+#define OMAP_PARAM_CHIPSET_ID 1 /* ie. 0x3430, 0x4430, etc */
+
+struct drm_omap_param {
+ uint64_t param; /* in */
+ uint64_t value; /* in (set_param), out (get_param) */
+};
+
+#define OMAP_BO_SCANOUT 0x00000001 /* scanout capable (phys contiguous) */
+#define OMAP_BO_CACHE_MASK 0x00000006 /* cache type mask, see cache modes */
+#define OMAP_BO_TILED_MASK 0x00000f00 /* tiled mapping mask, see tiled modes */
+
+/* cache modes */
+#define OMAP_BO_CACHED 0x00000000 /* default */
+#define OMAP_BO_WC 0x00000002 /* write-combine */
+#define OMAP_BO_UNCACHED 0x00000004 /* strongly-ordered (uncached) */
+
+/* tiled modes */
+#define OMAP_BO_TILED_8 0x00000100
+#define OMAP_BO_TILED_16 0x00000200
+#define OMAP_BO_TILED_32 0x00000300
+#define OMAP_BO_TILED (OMAP_BO_TILED_8 | OMAP_BO_TILED_16 | OMAP_BO_TILED_32)
+
+union omap_gem_size {
+ uint32_t bytes; /* (for non-tiled formats) */
+ struct {
+ uint16_t width;
+ uint16_t height;
+ } tiled; /* (for tiled formats) */
+};
+
+struct drm_omap_gem_new {
+ union omap_gem_size size; /* in */
+ uint32_t flags; /* in */
+ uint32_t handle; /* out */
+ uint32_t __pad;
+};
+
+/* mask of operations: */
+enum omap_gem_op {
+ OMAP_GEM_READ = 0x01,
+ OMAP_GEM_WRITE = 0x02,
+};
+
+struct drm_omap_gem_cpu_prep {
+ uint32_t handle; /* buffer handle (in) */
+ uint32_t op; /* mask of omap_gem_op (in) */
+};
+
+struct drm_omap_gem_cpu_fini {
+ uint32_t handle; /* buffer handle (in) */
+ uint32_t op; /* mask of omap_gem_op (in) */
+ /* TODO maybe here we pass down info about what regions are touched
+ * by sw so we can be clever about cache ops? For now a placeholder,
+ * set to zero and we just do full buffer flush..
+ */
+ uint32_t nregions;
+ uint32_t __pad;
+};
+
+struct drm_omap_gem_info {
+ uint32_t handle; /* buffer handle (in) */
+ uint32_t pad;
+ uint64_t offset; /* mmap offset (out) */
+ /* note: in case of tiled buffers, the user virtual size can be
+ * different from the physical size (ie. how many pages are needed
+ * to back the object) which is returned in DRM_IOCTL_GEM_OPEN..
+ * This size here is the one that should be used if you want to
+ * mmap() the buffer:
+ */
+ uint32_t size; /* virtual size for mmap'ing (out) */
+ uint32_t __pad;
+};
+
+#define DRM_OMAP_GET_PARAM 0x00
+#define DRM_OMAP_SET_PARAM 0x01
+/* placeholder for plugin-api
+#define DRM_OMAP_GET_BASE 0x02
+*/
+#define DRM_OMAP_GEM_NEW 0x03
+#define DRM_OMAP_GEM_CPU_PREP 0x04
+#define DRM_OMAP_GEM_CPU_FINI 0x05
+#define DRM_OMAP_GEM_INFO 0x06
+#define DRM_OMAP_NUM_IOCTLS 0x07
+
+#define DRM_IOCTL_OMAP_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GET_PARAM, struct drm_omap_param)
+#define DRM_IOCTL_OMAP_SET_PARAM DRM_IOW (DRM_COMMAND_BASE + DRM_OMAP_SET_PARAM, struct drm_omap_param)
+/* placeholder for plugin-api
+#define DRM_IOCTL_OMAP_GET_BASE DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GET_BASE, struct drm_omap_get_base)
+*/
+#define DRM_IOCTL_OMAP_GEM_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GEM_NEW, struct drm_omap_gem_new)
+#define DRM_IOCTL_OMAP_GEM_CPU_PREP DRM_IOW (DRM_COMMAND_BASE + DRM_OMAP_GEM_CPU_PREP, struct drm_omap_gem_cpu_prep)
+#define DRM_IOCTL_OMAP_GEM_CPU_FINI DRM_IOW (DRM_COMMAND_BASE + DRM_OMAP_GEM_CPU_FINI, struct drm_omap_gem_cpu_fini)
+#define DRM_IOCTL_OMAP_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GEM_INFO, struct drm_omap_gem_info)
+
+#endif /* __OMAP_DRM_H__ */
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_drv.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
+
+#define DRIVER_NAME MODULE_NAME
+#define DRIVER_DESC "OMAP DRM"
+#define DRIVER_DATE "20110917"
+#define DRIVER_MAJOR 1
+#define DRIVER_MINOR 0
+#define DRIVER_PATCHLEVEL 0
+
+struct drm_device *drm_device;
+
+static int num_crtc = CONFIG_DRM_OMAP_NUM_CRTCS;
+
+MODULE_PARM_DESC(num_crtc, "Number of overlays to use as CRTCs");
+module_param(num_crtc, int, 0600);
+
+/*
+ * mode config funcs
+ */
+
+/* Notes about mapping DSS and DRM entities:
+ * CRTC: overlay
+ * encoder: manager.. with some extension to allow one primary CRTC
+ * and zero or more video CRTC's to be mapped to one encoder?
+ * connector: dssdev.. manager can be attached/detached from different
+ * devices
+ */
+
+static void omap_fb_output_poll_changed(struct drm_device *dev)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ DBG("dev=%p", dev);
+ if (priv->fbdev) {
+ drm_fb_helper_hotplug_event(priv->fbdev);
+ }
+}
+
+static struct drm_mode_config_funcs omap_mode_config_funcs = {
+ .fb_create = omap_framebuffer_create,
+ .output_poll_changed = omap_fb_output_poll_changed,
+};
+
+static int get_connector_type(struct omap_dss_device *dssdev)
+{
+ switch (dssdev->type) {
+ case OMAP_DISPLAY_TYPE_HDMI:
+ return DRM_MODE_CONNECTOR_HDMIA;
+ case OMAP_DISPLAY_TYPE_DPI:
+ if (!strcmp(dssdev->name, "dvi"))
+ return DRM_MODE_CONNECTOR_DVID;
+ /* fallthrough */
+ default:
+ return DRM_MODE_CONNECTOR_Unknown;
+ }
+}
+
+#if 0 /* enable when dss2 supports hotplug */
+static int omap_drm_notifier(struct notifier_block *nb,
+ unsigned long evt, void *arg)
+{
+ switch (evt) {
+ case OMAP_DSS_SIZE_CHANGE:
+ case OMAP_DSS_HOTPLUG_CONNECT:
+ case OMAP_DSS_HOTPLUG_DISCONNECT: {
+ struct drm_device *dev = drm_device;
+ DBG("hotplug event: evt=%d, dev=%p", evt, dev);
+ if (dev) {
+ drm_sysfs_hotplug_event(dev);
+ }
+ return NOTIFY_OK;
+ }
+ default: /* don't care about other events for now */
+ return NOTIFY_DONE;
+ }
+}
+#endif
+
+static void dump_video_chains(void)
+{
+ int i;
+
+ DBG("dumping video chains: ");
+ for (i = 0; i < omap_dss_get_num_overlays(); i++) {
+ struct omap_overlay *ovl = omap_dss_get_overlay(i);
+ struct omap_overlay_manager *mgr = ovl->manager;
+ struct omap_dss_device *dssdev = mgr ? mgr->device : NULL;
+ if (dssdev) {
+ DBG("%d: %s -> %s -> %s", i, ovl->name, mgr->name,
+ dssdev->name);
+ } else if (mgr) {
+ DBG("%d: %s -> %s", i, ovl->name, mgr->name);
+ } else {
+ DBG("%d: %s", i, ovl->name);
+ }
+ }
+}
+
+/* create encoders for each manager */
+static int create_encoder(struct drm_device *dev,
+ struct omap_overlay_manager *mgr)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ struct drm_encoder *encoder = omap_encoder_init(dev, mgr);
+
+ if (!encoder) {
+ dev_err(dev->dev, "could not create encoder: %s\n",
+ mgr->name);
+ return -ENOMEM;
+ }
+
+ BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders));
+
+ priv->encoders[priv->num_encoders++] = encoder;
+
+ return 0;
+}
+
+/* create connectors for each display device */
+static int create_connector(struct drm_device *dev,
+ struct omap_dss_device *dssdev)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ static struct notifier_block *notifier;
+ struct drm_connector *connector;
+ int j;
+
+ if (!dssdev->driver) {
+ dev_warn(dev->dev, "%s has no driver.. skipping it\n",
+ dssdev->name);
+ return 0;
+ }
+
+ if (!(dssdev->driver->get_timings ||
+ dssdev->driver->read_edid)) {
+ dev_warn(dev->dev, "%s driver does not support "
+ "get_timings or read_edid.. skipping it!\n",
+ dssdev->name);
+ return 0;
+ }
+
+ connector = omap_connector_init(dev,
+ get_connector_type(dssdev), dssdev);
+
+ if (!connector) {
+ dev_err(dev->dev, "could not create connector: %s\n",
+ dssdev->name);
+ return -ENOMEM;
+ }
+
+ BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors));
+
+ priv->connectors[priv->num_connectors++] = connector;
+
+#if 0 /* enable when dss2 supports hotplug */
+ notifier = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
+ notifier->notifier_call = omap_drm_notifier;
+ omap_dss_add_notify(dssdev, notifier);
+#else
+ notifier = NULL;
+#endif
+
+ for (j = 0; j < priv->num_encoders; j++) {
+ struct omap_overlay_manager *mgr =
+ omap_encoder_get_manager(priv->encoders[j]);
+ if (mgr->device == dssdev) {
+ drm_mode_connector_attach_encoder(connector,
+ priv->encoders[j]);
+ }
+ }
+
+ return 0;
+}
+
+/* create up to max_overlays CRTCs mapping to overlays.. by default,
+ * connect the overlays to different managers/encoders, giving priority
+ * to encoders connected to connectors with a detected connection
+ */
+static int create_crtc(struct drm_device *dev, struct omap_overlay *ovl,
+ int *j, unsigned int connected_connectors)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ struct omap_overlay_manager *mgr = NULL;
+ struct drm_crtc *crtc;
+
+ if (ovl->manager) {
+ DBG("disconnecting %s from %s", ovl->name,
+ ovl->manager->name);
+ ovl->unset_manager(ovl);
+ }
+
+ /* find next best connector, ones with detected connection first
+ */
+ while (*j < priv->num_connectors && !mgr) {
+ if (connected_connectors & (1 << *j)) {
+ struct drm_encoder *encoder =
+ omap_connector_attached_encoder(
+ priv->connectors[*j]);
+ if (encoder) {
+ mgr = omap_encoder_get_manager(encoder);
+ }
+ }
+ (*j)++;
+ }
+
+ /* if we couldn't find another connected connector, lets start
+ * looking at the unconnected connectors:
+ *
+ * note: it might not be immediately apparent, but thanks to
+ * the !mgr check in both this loop and the one above, the only
+ * way to enter this loop is with *j == priv->num_connectors,
+ * so idx can never go negative.
+ */
+ while (*j < 2 * priv->num_connectors && !mgr) {
+ int idx = *j - priv->num_connectors;
+ if (!(connected_connectors & (1 << idx))) {
+ struct drm_encoder *encoder =
+ omap_connector_attached_encoder(
+ priv->connectors[idx]);
+ if (encoder) {
+ mgr = omap_encoder_get_manager(encoder);
+ }
+ }
+ (*j)++;
+ }
+
+ if (mgr) {
+ DBG("connecting %s to %s", ovl->name, mgr->name);
+ ovl->set_manager(ovl, mgr);
+ }
+
+ crtc = omap_crtc_init(dev, ovl, priv->num_crtcs);
+
+ if (!crtc) {
+ dev_err(dev->dev, "could not create CRTC: %s\n",
+ ovl->name);
+ return -ENOMEM;
+ }
+
+ BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
+
+ priv->crtcs[priv->num_crtcs++] = crtc;
+
+ return 0;
+}
+
+static int match_dev_name(struct omap_dss_device *dssdev, void *data)
+{
+ return !strcmp(dssdev->name, data);
+}
+
+static unsigned int detect_connectors(struct drm_device *dev)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ unsigned int connected_connectors = 0;
+ int i;
+
+ for (i = 0; i < priv->num_connectors; i++) {
+ struct drm_connector *connector = priv->connectors[i];
+ if (omap_connector_detect(connector, true) ==
+ connector_status_connected) {
+ connected_connectors |= (1 << i);
+ }
+ }
+
+ return connected_connectors;
+}
+
+static int omap_modeset_init(struct drm_device *dev)
+{
+ const struct omap_drm_platform_data *pdata = dev->dev->platform_data;
+ struct omap_drm_private *priv = dev->dev_private;
+ struct omap_dss_device *dssdev = NULL;
+ int i, j;
+ unsigned int connected_connectors = 0;
+
+ drm_mode_config_init(dev);
+
+ if (pdata) {
+ /* if platform data is provided by the board file, use it to
+ * control which overlays, managers, and devices we own.
+ */
+ for (i = 0; i < pdata->mgr_cnt; i++) {
+ struct omap_overlay_manager *mgr =
+ omap_dss_get_overlay_manager(pdata->mgr_ids[i]);
+ create_encoder(dev, mgr);
+ }
+
+ for (i = 0; i < pdata->dev_cnt; i++) {
+ struct omap_dss_device *dssdev =
+ omap_dss_find_device(
+ (void *)pdata->dev_names[i], match_dev_name);
+ if (!dssdev) {
+ dev_warn(dev->dev, "no such dssdev: %s\n",
+ pdata->dev_names[i]);
+ continue;
+ }
+ create_connector(dev, dssdev);
+ }
+
+ connected_connectors = detect_connectors(dev);
+
+ j = 0;
+ for (i = 0; i < pdata->ovl_cnt; i++) {
+ struct omap_overlay *ovl =
+ omap_dss_get_overlay(pdata->ovl_ids[i]);
+ create_crtc(dev, ovl, &j, connected_connectors);
+ }
+ } else {
+ /* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try
+ * to make educated guesses about everything else
+ */
+ int max_overlays = min(omap_dss_get_num_overlays(), num_crtc);
+
+ for (i = 0; i < omap_dss_get_num_overlay_managers(); i++) {
+ create_encoder(dev, omap_dss_get_overlay_manager(i));
+ }
+
+ for_each_dss_dev(dssdev) {
+ create_connector(dev, dssdev);
+ }
+
+ connected_connectors = detect_connectors(dev);
+
+ j = 0;
+ for (i = 0; i < max_overlays; i++) {
+ create_crtc(dev, omap_dss_get_overlay(i),
+ &j, connected_connectors);
+ }
+ }
+
+ /* for now keep the mapping of CRTCs and encoders static.. */
+ for (i = 0; i < priv->num_encoders; i++) {
+ struct drm_encoder *encoder = priv->encoders[i];
+ struct omap_overlay_manager *mgr =
+ omap_encoder_get_manager(encoder);
+
+ encoder->possible_crtcs = 0;
+
+ for (j = 0; j < priv->num_crtcs; j++) {
+ struct omap_overlay *ovl =
+ omap_crtc_get_overlay(priv->crtcs[j]);
+ if (ovl->manager == mgr) {
+ encoder->possible_crtcs |= (1 << j);
+ }
+ }
+
+ DBG("%s: possible_crtcs=%08x", mgr->name,
+ encoder->possible_crtcs);
+ }
+
+ dump_video_chains();
+
+ dev->mode_config.min_width = 256;
+ dev->mode_config.min_height = 256;
+
+ /* note: eventually will need some cpu_is_omapXYZ() type stuff here
+ * to fill in these limits properly on different OMAP generations..
+ */
+ dev->mode_config.max_width = 2048;
+ dev->mode_config.max_height = 2048;
+
+ dev->mode_config.funcs = &omap_mode_config_funcs;
+
+ return 0;
+}
+
+static void omap_modeset_free(struct drm_device *dev)
+{
+ drm_mode_config_cleanup(dev);
+}
+
+/*
+ * drm ioctl funcs
+ */
+
+
+static int ioctl_get_param(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_omap_param *args = data;
+
+ DBG("%p: param=%llu", dev, args->param);
+
+ switch (args->param) {
+ case OMAP_PARAM_CHIPSET_ID:
+ args->value = GET_OMAP_TYPE;
+ break;
+ default:
+ DBG("unknown parameter %lld", args->param);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ioctl_set_param(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_omap_param *args = data;
+
+ switch (args->param) {
+ default:
+ DBG("unknown parameter %lld", args->param);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ioctl_gem_new(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_omap_gem_new *args = data;
+ DBG("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
+ args->size.bytes, args->flags);
+ return omap_gem_new_handle(dev, file_priv, args->size,
+ args->flags, &args->handle);
+}
+
+static int ioctl_gem_cpu_prep(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_omap_gem_cpu_prep *args = data;
+ struct drm_gem_object *obj;
+ int ret;
+
+ VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args->op);
+
+ obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+ if (!obj) {
+ return -ENOENT;
+ }
+
+ ret = omap_gem_op_sync(obj, args->op);
+
+ if (!ret) {
+ ret = omap_gem_op_start(obj, args->op);
+ }
+
+ drm_gem_object_unreference_unlocked(obj);
+
+ return ret;
+}
+
+static int ioctl_gem_cpu_fini(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_omap_gem_cpu_fini *args = data;
+ struct drm_gem_object *obj;
+ int ret;
+
+ VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
+
+ obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+ if (!obj) {
+ return -ENOENT;
+ }
+
+ /* XXX flushy, flushy */
+ ret = 0;
+
+ if (!ret) {
+ ret = omap_gem_op_finish(obj, args->op);
+ }
+
+ drm_gem_object_unreference_unlocked(obj);
+
+ return ret;
+}
+
+static int ioctl_gem_info(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_omap_gem_info *args = data;
+ struct drm_gem_object *obj;
+ int ret = 0;
+
+ DBG("%p:%p: handle=%d", dev, file_priv, args->handle);
+
+ obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+ if (!obj) {
+ return -ENOENT;
+ }
+
+ args->size = obj->size; /* for now */
+ args->offset = omap_gem_mmap_offset(obj);
+
+ drm_gem_object_unreference_unlocked(obj);
+
+ return ret;
+}
+
+struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
+ DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, DRM_UNLOCKED|DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param, DRM_UNLOCKED|DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, DRM_UNLOCKED|DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, ioctl_gem_cpu_prep, DRM_UNLOCKED|DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, ioctl_gem_cpu_fini, DRM_UNLOCKED|DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info, DRM_UNLOCKED|DRM_AUTH),
+};
+
+/*
+ * drm driver funcs
+ */
+
+/**
+ * load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ * - initialize the memory manager
+ * - allocate initial config memory
+ * - setup the DRM framebuffer with the allocated memory
+ */
+static int dev_load(struct drm_device *dev, unsigned long flags)
+{
+ struct omap_drm_private *priv;
+ int ret;
+
+ DBG("load: dev=%p", dev);
+
+ drm_device = dev;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(dev->dev, "could not allocate priv\n");
+ return -ENOMEM;
+ }
+
+ dev->dev_private = priv;
+
+ ret = omap_modeset_init(dev);
+ if (ret) {
+ dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret);
+ dev->dev_private = NULL;
+ kfree(priv);
+ return ret;
+ }
+
+ priv->fbdev = omap_fbdev_init(dev);
+ if (!priv->fbdev) {
+ dev_warn(dev->dev, "omap_fbdev_init failed\n");
+ /* well, limp along without an fbdev.. maybe X11 will work? */
+ }
+
+ drm_kms_helper_poll_init(dev);
+
+ ret = drm_vblank_init(dev, priv->num_crtcs);
+ if (ret) {
+ dev_warn(dev->dev, "could not init vblank\n");
+ }
+
+ return 0;
+}
+
+static int dev_unload(struct drm_device *dev)
+{
+ DBG("unload: dev=%p", dev);
+
+ drm_vblank_cleanup(dev);
+ drm_kms_helper_poll_fini(dev);
+
+ omap_fbdev_free(dev);
+
+ omap_modeset_free(dev);
+
+ kfree(dev->dev_private);
+ dev->dev_private = NULL;
+
+ return 0;
+}
+
+static int dev_open(struct drm_device *dev, struct drm_file *file)
+{
+ file->driver_priv = NULL;
+
+ DBG("open: dev=%p, file=%p", dev, file);
+
+ return 0;
+}
+
+static int dev_firstopen(struct drm_device *dev)
+{
+ DBG("firstopen: dev=%p", dev);
+ return 0;
+}
+
+/**
+ * lastclose - clean up after all DRM clients have exited
+ * @dev: DRM device
+ *
+ * Take care of cleaning up after all DRM clients have exited. In the
+ * mode setting case, we want to restore the kernel's initial mode (just
+ * in case the last client left us in a bad state).
+ */
+static void dev_lastclose(struct drm_device *dev)
+{
+ /* we don't support vga-switcheroo.. so just make sure the fbdev
+ * mode is active
+ */
+ struct omap_drm_private *priv = dev->dev_private;
+ int ret;
+
+ DBG("lastclose: dev=%p", dev);
+
+ ret = drm_fb_helper_restore_fbdev_mode(priv->fbdev);
+ if (ret)
+ DBG("failed to restore crtc mode");
+}
+
+static void dev_preclose(struct drm_device *dev, struct drm_file *file)
+{
+ DBG("preclose: dev=%p", dev);
+}
+
+static void dev_postclose(struct drm_device *dev, struct drm_file *file)
+{
+ DBG("postclose: dev=%p, file=%p", dev, file);
+}
+
+/**
+ * enable_vblank - enable vblank interrupt events
+ * @dev: DRM device
+ * @crtc: which irq to enable
+ *
+ * Enable vblank interrupts for @crtc. If the device doesn't have
+ * a hardware vblank counter, this routine should be a no-op, since
+ * interrupts will have to stay on to keep the count accurate.
+ *
+ * RETURNS
+ * Zero on success, appropriate errno if the given @crtc's vblank
+ * interrupt cannot be enabled.
+ */
+static int dev_enable_vblank(struct drm_device *dev, int crtc)
+{
+ DBG("enable_vblank: dev=%p, crtc=%d", dev, crtc);
+ return 0;
+}
+
+/**
+ * disable_vblank - disable vblank interrupt events
+ * @dev: DRM device
+ * @crtc: which irq to enable
+ *
+ * Disable vblank interrupts for @crtc. If the device doesn't have
+ * a hardware vblank counter, this routine should be a no-op, since
+ * interrupts will have to stay on to keep the count accurate.
+ */
+static void dev_disable_vblank(struct drm_device *dev, int crtc)
+{
+ DBG("disable_vblank: dev=%p, crtc=%d", dev, crtc);
+}
+
+static irqreturn_t dev_irq_handler(DRM_IRQ_ARGS)
+{
+ return IRQ_HANDLED;
+}
+
+static void dev_irq_preinstall(struct drm_device *dev)
+{
+ DBG("irq_preinstall: dev=%p", dev);
+}
+
+static int dev_irq_postinstall(struct drm_device *dev)
+{
+ DBG("irq_postinstall: dev=%p", dev);
+ return 0;
+}
+
+static void dev_irq_uninstall(struct drm_device *dev)
+{
+ DBG("irq_uninstall: dev=%p", dev);
+}
+
+static struct vm_operations_struct omap_gem_vm_ops = {
+ .fault = omap_gem_fault,
+ .open = drm_gem_vm_open,
+ .close = drm_gem_vm_close,
+};
+
+static struct drm_driver omap_drm_driver = {
+ .driver_features =
+ DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM,
+ .load = dev_load,
+ .unload = dev_unload,
+ .open = dev_open,
+ .firstopen = dev_firstopen,
+ .lastclose = dev_lastclose,
+ .preclose = dev_preclose,
+ .postclose = dev_postclose,
+ .get_vblank_counter = drm_vblank_count,
+ .enable_vblank = dev_enable_vblank,
+ .disable_vblank = dev_disable_vblank,
+ .irq_preinstall = dev_irq_preinstall,
+ .irq_postinstall = dev_irq_postinstall,
+ .irq_uninstall = dev_irq_uninstall,
+ .irq_handler = dev_irq_handler,
+ .reclaim_buffers = drm_core_reclaim_buffers,
+ .gem_init_object = omap_gem_init_object,
+ .gem_free_object = omap_gem_free_object,
+ .gem_vm_ops = &omap_gem_vm_ops,
+ .dumb_create = omap_gem_dumb_create,
+ .dumb_map_offset = omap_gem_dumb_map_offset,
+ .dumb_destroy = omap_gem_dumb_destroy,
+ .ioctls = ioctls,
+ .num_ioctls = DRM_OMAP_NUM_IOCTLS,
+ .fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .unlocked_ioctl = drm_ioctl,
+ .release = drm_release,
+ .mmap = omap_gem_mmap,
+ .poll = drm_poll,
+ .fasync = drm_fasync,
+ .read = drm_read,
+ .llseek = noop_llseek,
+ },
+ .name = DRIVER_NAME,
+ .desc = DRIVER_DESC,
+ .date = DRIVER_DATE,
+ .major = DRIVER_MAJOR,
+ .minor = DRIVER_MINOR,
+ .patchlevel = DRIVER_PATCHLEVEL,
+};
+
+static int pdev_suspend(struct platform_device *pDevice, pm_message_t state)
+{
+ DBG("");
+ return 0;
+}
+
+static int pdev_resume(struct platform_device *device)
+{
+ DBG("");
+ return 0;
+}
+
+static void pdev_shutdown(struct platform_device *device)
+{
+ DBG("");
+}
+
+static int pdev_probe(struct platform_device *device)
+{
+ DBG("%s", device->name);
+ return drm_platform_init(&omap_drm_driver, device);
+}
+
+static int pdev_remove(struct platform_device *device)
+{
+ DBG("");
+ drm_platform_exit(&omap_drm_driver, device);
+ return 0;
+}
+
+struct platform_driver pdev = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = pdev_probe,
+ .remove = pdev_remove,
+ .suspend = pdev_suspend,
+ .resume = pdev_resume,
+ .shutdown = pdev_shutdown,
+};
+
+static int __init omap_drm_init(void)
+{
+ DBG("init");
+ return platform_driver_register(&pdev);
+}
+
+static void __exit omap_drm_fini(void)
+{
+ DBG("fini");
+ platform_driver_unregister(&pdev);
+}
+
+/* need late_initcall() so we load after dss_driver's are loaded */
+late_initcall(omap_drm_init);
+module_exit(omap_drm_fini);
+
+MODULE_AUTHOR("Rob Clark <rob@ti.com>");
+MODULE_DESCRIPTION("OMAP DRM Display Driver");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_drv.h
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_DRV_H__
+#define __OMAP_DRV_H__
+
+#include <video/omapdss.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <drm/drmP.h>
+#include "omap_drm.h"
+#include "omap_priv.h"
+
+#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
+#define VERB(fmt, ...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose debug */
+
+#define MODULE_NAME "omapdrm"
+
+/* max # of mapper-id's that can be assigned.. todo, come up with a better
+ * (but still inexpensive) way to store/access per-buffer mapper private
+ * data..
+ */
+#define MAX_MAPPERS 2
+
+struct omap_drm_private {
+ unsigned int num_crtcs;
+ struct drm_crtc *crtcs[8];
+ unsigned int num_encoders;
+ struct drm_encoder *encoders[8];
+ unsigned int num_connectors;
+ struct drm_connector *connectors[8];
+
+ struct drm_fb_helper *fbdev;
+};
+
+struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev);
+void omap_fbdev_free(struct drm_device *dev);
+
+struct drm_crtc *omap_crtc_init(struct drm_device *dev,
+ struct omap_overlay *ovl, int id);
+struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc);
+
+struct drm_encoder *omap_encoder_init(struct drm_device *dev,
+ struct omap_overlay_manager *mgr);
+struct omap_overlay_manager *omap_encoder_get_manager(
+ struct drm_encoder *encoder);
+struct drm_encoder *omap_connector_attached_encoder(
+ struct drm_connector *connector);
+enum drm_connector_status omap_connector_detect(
+ struct drm_connector *connector, bool force);
+
+struct drm_connector *omap_connector_init(struct drm_device *dev,
+ int connector_type, struct omap_dss_device *dssdev);
+void omap_connector_mode_set(struct drm_connector *connector,
+ struct drm_display_mode *mode);
+void omap_connector_flush(struct drm_connector *connector,
+ int x, int y, int w, int h);
+
+struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev,
+ struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd);
+struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
+ struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *bo);
+struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb);
+int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y,
+ void **vaddr, dma_addr_t *paddr, unsigned int *screen_width);
+struct drm_connector *omap_framebuffer_get_next_connector(
+ struct drm_framebuffer *fb, struct drm_connector *from);
+void omap_framebuffer_flush(struct drm_framebuffer *fb,
+ int x, int y, int w, int h);
+
+
+struct drm_gem_object *omap_gem_new(struct drm_device *dev,
+ union omap_gem_size gsize, uint32_t flags);
+int omap_gem_new_handle(struct drm_device *dev, struct drm_file *file,
+ union omap_gem_size gsize, uint32_t flags, uint32_t *handle);
+void omap_gem_free_object(struct drm_gem_object *obj);
+int omap_gem_init_object(struct drm_gem_object *obj);
+void *omap_gem_vaddr(struct drm_gem_object *obj);
+int omap_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev,
+ uint32_t handle, uint64_t *offset);
+int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
+ uint32_t handle);
+int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
+ struct drm_mode_create_dumb *args);
+int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma);
+int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
+int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op);
+int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op);
+int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op);
+int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op,
+ void (*fxn)(void *arg), void *arg);
+int omap_gem_get_paddr(struct drm_gem_object *obj,
+ dma_addr_t *paddr, bool remap);
+int omap_gem_put_paddr(struct drm_gem_object *obj);
+uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj);
+
+static inline int align_pitch(int pitch, int width, int bpp)
+{
+ int bytespp = (bpp + 7) / 8;
+ /* in case someone tries to feed us a completely bogus stride: */
+ pitch = max(pitch, width * bytespp);
+ /* PVR needs alignment to 8 pixels.. right now that is the most
+ * restrictive stride requirement..
+ */
+ return ALIGN(pitch, 8 * bytespp);
+}
+
+#endif /* __OMAP_DRV_H__ */
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_encoder.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+/*
+ * encoder funcs
+ */
+
+#define to_omap_encoder(x) container_of(x, struct omap_encoder, base)
+
+struct omap_encoder {
+ struct drm_encoder base;
+ struct omap_overlay_manager *mgr;
+};
+
+static void omap_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+ DBG("%s", omap_encoder->mgr->name);
+ drm_encoder_cleanup(encoder);
+ kfree(omap_encoder);
+}
+
+static void omap_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+ DBG("%s: %d", omap_encoder->mgr->name, mode);
+}
+
+static bool omap_encoder_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+ DBG("%s", omap_encoder->mgr->name);
+ return true;
+}
+
+static void omap_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ struct omap_drm_private *priv = dev->dev_private;
+ int i;
+
+ mode = adjusted_mode;
+
+ DBG("%s: set mode: %dx%d", omap_encoder->mgr->name,
+ mode->hdisplay, mode->vdisplay);
+
+ for (i = 0; i < priv->num_connectors; i++) {
+ struct drm_connector *connector = priv->connectors[i];
+ if (connector->encoder == encoder) {
+ omap_connector_mode_set(connector, mode);
+ }
+ }
+}
+
+static void omap_encoder_prepare(struct drm_encoder *encoder)
+{
+ struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+ struct drm_encoder_helper_funcs *encoder_funcs =
+ encoder->helper_private;
+ DBG("%s", omap_encoder->mgr->name);
+ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void omap_encoder_commit(struct drm_encoder *encoder)
+{
+ struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+ struct drm_encoder_helper_funcs *encoder_funcs =
+ encoder->helper_private;
+ DBG("%s", omap_encoder->mgr->name);
+ omap_encoder->mgr->apply(omap_encoder->mgr);
+ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static const struct drm_encoder_funcs omap_encoder_funcs = {
+ .destroy = omap_encoder_destroy,
+};
+
+static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = {
+ .dpms = omap_encoder_dpms,
+ .mode_fixup = omap_encoder_mode_fixup,
+ .mode_set = omap_encoder_mode_set,
+ .prepare = omap_encoder_prepare,
+ .commit = omap_encoder_commit,
+};
+
+struct omap_overlay_manager *omap_encoder_get_manager(
+ struct drm_encoder *encoder)
+{
+ struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+ return omap_encoder->mgr;
+}
+
+/* initialize encoder */
+struct drm_encoder *omap_encoder_init(struct drm_device *dev,
+ struct omap_overlay_manager *mgr)
+{
+ struct drm_encoder *encoder = NULL;
+ struct omap_encoder *omap_encoder;
+ struct omap_overlay_manager_info info;
+ int ret;
+
+ DBG("%s", mgr->name);
+
+ omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL);
+ if (!omap_encoder) {
+ dev_err(dev->dev, "could not allocate encoder\n");
+ goto fail;
+ }
+
+ omap_encoder->mgr = mgr;
+ encoder = &omap_encoder->base;
+
+ drm_encoder_init(dev, encoder, &omap_encoder_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs);
+
+ mgr->get_manager_info(mgr, &info);
+
+ /* TODO: fix hard-coded setup.. */
+ info.default_color = 0x00000000;
+ info.trans_key = 0x00000000;
+ info.trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
+ info.trans_enabled = false;
+
+ ret = mgr->set_manager_info(mgr, &info);
+ if (ret) {
+ dev_err(dev->dev, "could not set manager info\n");
+ goto fail;
+ }
+
+ ret = mgr->apply(mgr);
+ if (ret) {
+ dev_err(dev->dev, "could not apply\n");
+ goto fail;
+ }
+
+ return encoder;
+
+fail:
+ if (encoder) {
+ drm_encoder_cleanup(encoder);
+ kfree(omap_encoder);
+ }
+
+ return NULL;
+}
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_fb.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+
+/*
+ * framebuffer funcs
+ */
+
+#define to_omap_framebuffer(x) container_of(x, struct omap_framebuffer, base)
+
+struct omap_framebuffer {
+ struct drm_framebuffer base;
+ struct drm_gem_object *bo;
+ int size;
+ dma_addr_t paddr;
+};
+
+static int omap_framebuffer_create_handle(struct drm_framebuffer *fb,
+ struct drm_file *file_priv,
+ unsigned int *handle)
+{
+ struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+ return drm_gem_handle_create(file_priv, omap_fb->bo, handle);
+}
+
+static void omap_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+ struct drm_device *dev = fb->dev;
+ struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+
+ DBG("destroy: FB ID: %d (%p)", fb->base.id, fb);
+
+ drm_framebuffer_cleanup(fb);
+
+ if (omap_gem_put_paddr(omap_fb->bo)) {
+ dev_err(dev->dev, "could not unmap!\n");
+ }
+
+ if (omap_fb->bo) {
+ drm_gem_object_unreference_unlocked(omap_fb->bo);
+ }
+
+ kfree(omap_fb);
+}
+
+static int omap_framebuffer_dirty(struct drm_framebuffer *fb,
+ struct drm_file *file_priv, unsigned flags, unsigned color,
+ struct drm_clip_rect *clips, unsigned num_clips)
+{
+ int i;
+
+ for (i = 0; i < num_clips; i++) {
+ omap_framebuffer_flush(fb, clips[i].x1, clips[i].y1,
+ clips[i].x2 - clips[i].x1,
+ clips[i].y2 - clips[i].y1);
+ }
+
+ return 0;
+}
+
+static const struct drm_framebuffer_funcs omap_framebuffer_funcs = {
+ .create_handle = omap_framebuffer_create_handle,
+ .destroy = omap_framebuffer_destroy,
+ .dirty = omap_framebuffer_dirty,
+};
+
+/* returns the buffer size */
+int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y,
+ void **vaddr, dma_addr_t *paddr, unsigned int *screen_width)
+{
+ struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+ int bpp = fb->bits_per_pixel / 8;
+ unsigned long offset;
+
+ offset = (x * bpp) + (y * fb->pitch);
+
+ if (vaddr) {
+ void *bo_vaddr = omap_gem_vaddr(omap_fb->bo);
+ /* note: we can only count on having a vaddr for buffers that
+ * are allocated physically contiguously to begin with (ie.
+ * dma_alloc_coherent()). But this should be ok because it
+ * is only used by legacy fbdev
+ */
+ BUG_ON(!bo_vaddr);
+ *vaddr = bo_vaddr + offset;
+ }
+
+ *paddr = omap_fb->paddr + offset;
+ *screen_width = fb->pitch / bpp;
+
+ return omap_fb->size - offset;
+}
+
+struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb)
+{
+ struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+ return omap_fb->bo;
+}
+
+/* iterate thru all the connectors, returning ones that are attached
+ * to the same fb..
+ */
+struct drm_connector *omap_framebuffer_get_next_connector(
+ struct drm_framebuffer *fb, struct drm_connector *from)
+{
+ struct drm_device *dev = fb->dev;
+ struct list_head *connector_list = &dev->mode_config.connector_list;
+ struct drm_connector *connector = from;
+
+ if (!from) {
+ return list_first_entry(connector_list, typeof(*from), head);
+ }
+
+ list_for_each_entry_from(connector, connector_list, head) {
+ if (connector != from) {
+ struct drm_encoder *encoder = connector->encoder;
+ struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
+ if (crtc && crtc->fb == fb) {
+ return connector;
+ }
+ }
+ }
+
+ return NULL;
+}
+
+/* flush an area of the framebuffer (in case of manual update display that
+ * is not automatically flushed)
+ */
+void omap_framebuffer_flush(struct drm_framebuffer *fb,
+ int x, int y, int w, int h)
+{
+ struct drm_connector *connector = NULL;
+
+ VERB("flush: %d,%d %dx%d, fb=%p", x, y, w, h, fb);
+
+ while ((connector = omap_framebuffer_get_next_connector(fb, connector))) {
+ /* only consider connectors that are part of a chain */
+ if (connector->encoder && connector->encoder->crtc) {
+ /* TODO: maybe this should propagate thru the crtc who
+ * could do the coordinate translation..
+ */
+ struct drm_crtc *crtc = connector->encoder->crtc;
+ int cx = max(0, x - crtc->x);
+ int cy = max(0, y - crtc->y);
+ int cw = w + (x - crtc->x) - cx;
+ int ch = h + (y - crtc->y) - cy;
+
+ omap_connector_flush(connector, cx, cy, cw, ch);
+ }
+ }
+}
+
+struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev,
+ struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd)
+{
+ struct drm_gem_object *bo;
+ struct drm_framebuffer *fb;
+ bo = drm_gem_object_lookup(dev, file, mode_cmd->handle);
+ if (!bo) {
+ return ERR_PTR(-ENOENT);
+ }
+ fb = omap_framebuffer_init(dev, mode_cmd, bo);
+ if (!fb) {
+ return ERR_PTR(-ENOMEM);
+ }
+ return fb;
+}
+
+struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
+ struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *bo)
+{
+ struct omap_framebuffer *omap_fb;
+ struct drm_framebuffer *fb = NULL;
+ int size, ret;
+
+ DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%d)",
+ dev, mode_cmd, mode_cmd->width, mode_cmd->height,
+ mode_cmd->bpp);
+
+ /* in case someone tries to feed us a completely bogus stride: */
+ mode_cmd->pitch = align_pitch(mode_cmd->pitch,
+ mode_cmd->width, mode_cmd->bpp);
+
+ omap_fb = kzalloc(sizeof(*omap_fb), GFP_KERNEL);
+ if (!omap_fb) {
+ dev_err(dev->dev, "could not allocate fb\n");
+ goto fail;
+ }
+
+ fb = &omap_fb->base;
+ ret = drm_framebuffer_init(dev, fb, &omap_framebuffer_funcs);
+ if (ret) {
+ dev_err(dev->dev, "framebuffer init failed: %d\n", ret);
+ goto fail;
+ }
+
+ DBG("create: FB ID: %d (%p)", fb->base.id, fb);
+
+ size = PAGE_ALIGN(mode_cmd->pitch * mode_cmd->height);
+
+ if (bo) {
+ DBG("using existing %d byte buffer (needed %d)", bo->size, size);
+ if (size > bo->size) {
+ dev_err(dev->dev, "provided buffer object is too small!\n");
+ goto fail;
+ }
+ } else {
+ /* for convenience of all the various callers who don't want
+ * to be bothered to allocate their own buffer..
+ */
+ union omap_gem_size gsize = {
+ .bytes = size,
+ };
+ DBG("allocating %d bytes for fb %d", size, dev->primary->index);
+ bo = omap_gem_new(dev, gsize, OMAP_BO_SCANOUT | OMAP_BO_WC);
+ if (!bo) {
+ dev_err(dev->dev, "failed to allocate buffer object\n");
+ goto fail;
+ }
+ }
+
+ omap_fb->bo = bo;
+ omap_fb->size = size;
+
+ if (omap_gem_get_paddr(bo, &omap_fb->paddr, true)) {
+ dev_err(dev->dev, "could not map (paddr)!\n");
+ goto fail;
+ }
+
+ drm_helper_mode_fill_fb_struct(fb, mode_cmd);
+
+ return fb;
+
+fail:
+ if (fb) {
+ omap_framebuffer_destroy(fb);
+ }
+ return NULL;
+}
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_fbdev.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc.h"
+#include "drm_fb_helper.h"
+
+/*
+ * fbdev funcs, to implement legacy fbdev interface on top of drm driver
+ */
+
+#define to_omap_fbdev(x) container_of(x, struct omap_fbdev, base)
+
+struct omap_fbdev {
+ struct drm_fb_helper base;
+ struct drm_framebuffer *fb;
+};
+
+static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w, int h);
+
+static ssize_t omap_fbdev_write(struct fb_info *fbi, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t res;
+
+ res = fb_sys_write(fbi, buf, count, ppos);
+ omap_fbdev_flush(fbi, 0, 0, fbi->var.xres, fbi->var.yres);
+
+ return res;
+}
+
+static void omap_fbdev_fillrect(struct fb_info *fbi,
+ const struct fb_fillrect *rect)
+{
+ sys_fillrect(fbi, rect);
+ omap_fbdev_flush(fbi, rect->dx, rect->dy, rect->width, rect->height);
+}
+
+static void omap_fbdev_copyarea(struct fb_info *fbi,
+ const struct fb_copyarea *area)
+{
+ sys_copyarea(fbi, area);
+ omap_fbdev_flush(fbi, area->dx, area->dy, area->width, area->height);
+}
+
+static void omap_fbdev_imageblit(struct fb_info *fbi,
+ const struct fb_image *image)
+{
+ sys_imageblit(fbi, image);
+ omap_fbdev_flush(fbi, image->dx, image->dy,
+ image->width, image->height);
+}
+
+static struct fb_ops omap_fb_ops = {
+ .owner = THIS_MODULE,
+
+ /* Note: to properly handle manual update displays, we wrap the
+ * basic fbdev ops which write to the framebuffer
+ */
+ .fb_read = fb_sys_read,
+ .fb_write = omap_fbdev_write,
+ .fb_fillrect = omap_fbdev_fillrect,
+ .fb_copyarea = omap_fbdev_copyarea,
+ .fb_imageblit = omap_fbdev_imageblit,
+
+ .fb_check_var = drm_fb_helper_check_var,
+ .fb_set_par = drm_fb_helper_set_par,
+ .fb_pan_display = drm_fb_helper_pan_display,
+ .fb_blank = drm_fb_helper_blank,
+ .fb_setcmap = drm_fb_helper_setcmap,
+
+ .fb_debug_enter = drm_fb_helper_debug_enter,
+ .fb_debug_leave = drm_fb_helper_debug_leave,
+};
+
+static int omap_fbdev_create(struct drm_fb_helper *helper,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ struct omap_fbdev *fbdev = to_omap_fbdev(helper);
+ struct drm_device *dev = helper->dev;
+ struct drm_framebuffer *fb = NULL;
+ struct fb_info *fbi = NULL;
+ struct drm_mode_fb_cmd mode_cmd = {0};
+ dma_addr_t paddr;
+ void __iomem *vaddr;
+ int size, screen_width;
+ int ret;
+
+ /* only doing ARGB32 since this is what is needed to alpha-blend
+ * with video overlays:
+ */
+ sizes->surface_bpp = 32;
+ sizes->surface_depth = 32;
+
+ DBG("create fbdev: %dx%d@%d", sizes->surface_width,
+ sizes->surface_height, sizes->surface_bpp);
+
+ mode_cmd.width = sizes->surface_width;
+ mode_cmd.height = sizes->surface_height;
+
+ mode_cmd.bpp = sizes->surface_bpp;
+ mode_cmd.depth = sizes->surface_depth;
+
+ fb = omap_framebuffer_init(dev, &mode_cmd, NULL);
+ if (!fb) {
+ dev_err(dev->dev, "failed to allocate fb\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ mutex_lock(&dev->struct_mutex);
+
+ fbi = framebuffer_alloc(0, dev->dev);
+ if (!fbi) {
+ dev_err(dev->dev, "failed to allocate fb info\n");
+ ret = -ENOMEM;
+ goto fail_unlock;
+ }
+
+ DBG("fbi=%p, dev=%p", fbi, dev);
+
+ fbdev->fb = fb;
+ helper->fb = fb;
+ helper->fbdev = fbi;
+
+ fbi->par = helper;
+ fbi->flags = FBINFO_DEFAULT;
+ fbi->fbops = &omap_fb_ops;
+
+ strcpy(fbi->fix.id, MODULE_NAME);
+
+ ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
+ if (ret) {
+ ret = -ENOMEM;
+ goto fail_unlock;
+ }
+
+ drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth);
+ drm_fb_helper_fill_var(fbi, helper, fb->width, fb->height);
+
+ size = omap_framebuffer_get_buffer(fb, 0, 0,
+ &vaddr, &paddr, &screen_width);
+
+ dev->mode_config.fb_base = paddr;
+
+ fbi->screen_base = vaddr;
+ fbi->screen_size = size;
+ fbi->fix.smem_start = paddr;
+ fbi->fix.smem_len = size;
+
+ DBG("par=%p, %dx%d", fbi->par, fbi->var.xres, fbi->var.yres);
+ DBG("allocated %dx%d fb", fbdev->fb->width, fbdev->fb->height);
+
+ mutex_unlock(&dev->struct_mutex);
+
+ return 0;
+
+fail_unlock:
+ mutex_unlock(&dev->struct_mutex);
+fail:
+
+ if (ret) {
+ if (fbi)
+ framebuffer_release(fbi);
+ if (fb)
+ fb->funcs->destroy(fb);
+ }
+
+ return ret;
+}
+
+static void omap_crtc_fb_gamma_set(struct drm_crtc *crtc,
+ u16 red, u16 green, u16 blue, int regno)
+{
+ DBG("fbdev: set gamma");
+}
+
+static void omap_crtc_fb_gamma_get(struct drm_crtc *crtc,
+ u16 *red, u16 *green, u16 *blue, int regno)
+{
+ DBG("fbdev: get gamma");
+}
+
+static int omap_fbdev_probe(struct drm_fb_helper *helper,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ int new_fb = 0;
+ int ret;
+
+ if (!helper->fb) {
+ ret = omap_fbdev_create(helper, sizes);
+ if (ret)
+ return ret;
+ new_fb = 1;
+ }
+ return new_fb;
+}
+
+static struct drm_fb_helper_funcs omap_fb_helper_funcs = {
+ .gamma_set = omap_crtc_fb_gamma_set,
+ .gamma_get = omap_crtc_fb_gamma_get,
+ .fb_probe = omap_fbdev_probe,
+};
+
+static struct drm_fb_helper *get_fb(struct fb_info *fbi)
+{
+ if (!fbi || strcmp(fbi->fix.id, MODULE_NAME)) {
+ /* these are not the fb's you're looking for */
+ return NULL;
+ }
+ return fbi->par;
+}
+
+/* flush an area of the framebuffer (in case of manual update display that
+ * is not automatically flushed)
+ */
+static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w, int h)
+{
+ struct drm_fb_helper *helper = get_fb(fbi);
+
+ if (!helper)
+ return;
+
+ VERB("flush fbdev: %d,%d %dx%d, fbi=%p", x, y, w, h, fbi);
+
+ omap_framebuffer_flush(helper->fb, x, y, w, h);
+}
+
+/* initialize fbdev helper */
+struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ struct omap_fbdev *fbdev = NULL;
+ struct drm_fb_helper *helper;
+ int ret = 0;
+
+ fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
+ if (!fbdev) {
+ dev_err(dev->dev, "could not allocate fbdev\n");
+ goto fail;
+ }
+
+ helper = &fbdev->base;
+
+ helper->funcs = &omap_fb_helper_funcs;
+
+ ret = drm_fb_helper_init(dev, helper,
+ priv->num_crtcs, priv->num_connectors);
+ if (ret) {
+ dev_err(dev->dev, "could not init fbdev: ret=%d\n", ret);
+ goto fail;
+ }
+
+ drm_fb_helper_single_add_all_connectors(helper);
+ drm_fb_helper_initial_config(helper, 32);
+
+ priv->fbdev = helper;
+
+ return helper;
+
+fail:
+ kfree(fbdev);
+ return NULL;
+}
+
+void omap_fbdev_free(struct drm_device *dev)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ struct drm_fb_helper *helper = priv->fbdev;
+ struct omap_fbdev *fbdev;
+ struct fb_info *fbi;
+
+ DBG();
+
+ fbi = helper->fbdev;
+
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
+
+ drm_fb_helper_fini(helper);
+
+ fbdev = to_omap_fbdev(priv->fbdev);
+
+ kfree(fbdev);
+
+ priv->fbdev = NULL;
+}
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_gem.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include <linux/spinlock.h>
+#include <linux/shmem_fs.h>
+
+#include "omap_drv.h"
+
+/* remove these once drm core helpers are merged */
+struct page ** _drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask);
+void _drm_gem_put_pages(struct drm_gem_object *obj, struct page **pages,
+ bool dirty, bool accessed);
+
+/*
+ * GEM buffer object implementation.
+ */
+
+#define to_omap_bo(x) container_of(x, struct omap_gem_object, base)
+
+/* note: we use upper 8 bits of flags for driver-internal flags: */
+#define OMAP_BO_DMA 0x01000000 /* actually is physically contiguous */
+#define OMAP_BO_EXT_SYNC 0x02000000 /* externally allocated sync object */
+#define OMAP_BO_EXT_MEM 0x04000000 /* externally allocated memory */
+
+
+struct omap_gem_object {
+ struct drm_gem_object base;
+
+ uint32_t flags;
+
+ /**
+ * If buffer is allocated physically contiguous, the OMAP_BO_DMA flag
+ * is set and the paddr is valid.
+ *
+ * Note that OMAP_BO_SCANOUT is a hint from userspace that DMA capable
+ * buffer is requested, but doesn't mean that it is. Use the
+ * OMAP_BO_DMA flag to determine if the buffer has a DMA capable
+ * physical address.
+ */
+ dma_addr_t paddr;
+
+ /**
+ * Array of backing pages, if allocated. Note that pages are never
+ * allocated for buffers originally allocated from contiguous memory
+ */
+ struct page **pages;
+
+ /**
+ * Virtual address, if mapped.
+ */
+ void *vaddr;
+
+ /**
+ * sync-object allocated on demand (if needed)
+ *
+ * Per-buffer sync-object for tracking pending and completed hw/dma
+ * read and write operations. The layout in memory is dictated by
+ * the SGX firmware, which uses this information to stall the command
+ * stream if a surface is not ready yet.
+ *
+ * Note that when buffer is used by SGX, the sync-object needs to be
+ * allocated from a special heap of sync-objects. This way many sync
+ * objects can be packed in a page, and not waste GPU virtual address
+ * space. Because of this we have to have a omap_gem_set_sync_object()
+ * API to allow replacement of the syncobj after it has (potentially)
+ * already been allocated. A bit ugly but I haven't thought of a
+ * better alternative.
+ */
+ struct {
+ uint32_t write_pending;
+ uint32_t write_complete;
+ uint32_t read_pending;
+ uint32_t read_complete;
+ } *sync;
+};
+
+/* GEM objects can either be allocated from contiguous memory (in which
+ * case obj->filp==NULL), or w/ shmem backing (obj->filp!=NULL). But non
+ * contiguous buffers can be remapped in TILER/DMM if they need to be
+ * contiguous... but we don't do this all the time to reduce pressure
+ * on TILER/DMM space when we know at allocation time that the buffer
+ * will need to be scanned out.
+ */
+static inline bool is_shmem(struct drm_gem_object *obj)
+{
+ return obj->filp != NULL;
+}
+
+static int get_pages(struct drm_gem_object *obj, struct page ***pages);
+
+static DEFINE_SPINLOCK(sync_lock);
+
+/** ensure backing pages are allocated */
+static int omap_gem_attach_pages(struct drm_gem_object *obj)
+{
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ struct page **pages;
+
+ WARN_ON(omap_obj->pages);
+
+ /* TODO: __GFP_DMA32 .. but somehow GFP_HIGHMEM is coming from the
+ * mapping_gfp_mask(mapping) which conflicts w/ GFP_DMA32.. probably
+ * we actually want CMA memory for it all anyways..
+ */
+ pages = _drm_gem_get_pages(obj, GFP_KERNEL);
+ if (IS_ERR(pages)) {
+ dev_err(obj->dev->dev, "could not get pages: %ld\n", PTR_ERR(pages));
+ return PTR_ERR(pages);
+ }
+
+ omap_obj->pages = pages;
+ return 0;
+}
+
+/** release backing pages */
+static void omap_gem_detach_pages(struct drm_gem_object *obj)
+{
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ _drm_gem_put_pages(obj, omap_obj->pages, true, false);
+ omap_obj->pages = NULL;
+}
+
+/** get mmap offset */
+uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj)
+{
+ if (!obj->map_list.map) {
+ /* Make it mmapable */
+ int ret = drm_gem_create_mmap_offset(obj);
+ if (ret) {
+ dev_err(obj->dev->dev, "could not allocate mmap offset");
+ return 0;
+ }
+ }
+
+ return (uint64_t)obj->map_list.hash.key << PAGE_SHIFT;
+}
+
+/**
+ * omap_gem_fault - pagefault handler for GEM objects
+ * @vma: the VMA of the GEM object
+ * @vmf: fault detail
+ *
+ * Invoked when a fault occurs on an mmap of a GEM managed area. GEM
+ * does most of the work for us including the actual map/unmap calls
+ * but we need to do the actual page work.
+ *
+ * The VMA was set up by GEM. In doing so it also ensured that the
+ * vma->vm_private_data points to the GEM object that is backing this
+ * mapping.
+ */
+int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ struct drm_gem_object *obj = vma->vm_private_data;
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ struct drm_device *dev = obj->dev;
+ struct page **pages;
+ unsigned long pfn;
+ pgoff_t pgoff;
+ int ret;
+
+ /* Make sure we don't parallel update on a fault, nor move or remove
+ * something from beneath our feet
+ */
+ mutex_lock(&dev->struct_mutex);
+
+ /* if a shmem backed object, make sure we have pages attached now */
+ ret = get_pages(obj, &pages);
+ if (ret) {
+ goto fail;
+ }
+
+ /* where should we do corresponding put_pages().. we are mapping
+ * the original page, rather than thru a GART, so we can't rely
+ * on eviction to trigger this. But munmap() or all mappings should
+ * probably trigger put_pages()?
+ */
+
+ /* We don't use vmf->pgoff since that has the fake offset: */
+ pgoff = ((unsigned long)vmf->virtual_address -
+ vma->vm_start) >> PAGE_SHIFT;
+
+ if (omap_obj->pages) {
+ pfn = page_to_pfn(omap_obj->pages[pgoff]);
+ } else {
+ BUG_ON(!(omap_obj->flags & OMAP_BO_DMA));
+ pfn = (omap_obj->paddr >> PAGE_SHIFT) + pgoff;
+ }
+
+ VERB("Inserting %p pfn %lx, pa %lx", vmf->virtual_address,
+ pfn, pfn << PAGE_SHIFT);
+
+ ret = vm_insert_mixed(vma, (unsigned long)vmf->virtual_address, pfn);
+
+fail:
+ mutex_unlock(&dev->struct_mutex);
+ switch (ret) {
+ case 0:
+ case -ERESTARTSYS:
+ case -EINTR:
+ return VM_FAULT_NOPAGE;
+ case -ENOMEM:
+ return VM_FAULT_OOM;
+ default:
+ return VM_FAULT_SIGBUS;
+ }
+}
+
+/** We override mainly to fix up some of the vm mapping flags.. */
+int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ struct omap_gem_object *omap_obj;
+ int ret;
+
+ ret = drm_gem_mmap(filp, vma);
+ if (ret) {
+ DBG("mmap failed: %d", ret);
+ return ret;
+ }
+
+ /* after drm_gem_mmap(), it is safe to access the obj */
+ omap_obj = to_omap_bo(vma->vm_private_data);
+
+ vma->vm_flags &= ~VM_PFNMAP;
+ vma->vm_flags |= VM_MIXEDMAP;
+
+ if (omap_obj->flags & OMAP_BO_WC) {
+ vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags));
+ } else if (omap_obj->flags & OMAP_BO_UNCACHED) {
+ vma->vm_page_prot = pgprot_noncached(vm_get_page_prot(vma->vm_flags));
+ } else {
+ vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
+ }
+
+ return ret;
+}
+
+/**
+ * omap_gem_dumb_create - create a dumb buffer
+ * @drm_file: our client file
+ * @dev: our device
+ * @args: the requested arguments copied from userspace
+ *
+ * Allocate a buffer suitable for use for a frame buffer of the
+ * form described by user space. Give userspace a handle by which
+ * to reference it.
+ */
+int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
+ struct drm_mode_create_dumb *args)
+{
+ union omap_gem_size gsize;
+
+ /* in case someone tries to feed us a completely bogus stride: */
+ args->pitch = align_pitch(args->pitch, args->width, args->bpp);
+ args->size = PAGE_ALIGN(args->pitch * args->height);
+
+ gsize = (union omap_gem_size){
+ .bytes = args->size,
+ };
+
+ return omap_gem_new_handle(dev, file, gsize,
+ OMAP_BO_SCANOUT | OMAP_BO_WC, &args->handle);
+}
+
+/**
+ * omap_gem_dumb_destroy - destroy a dumb buffer
+ * @file: client file
+ * @dev: our DRM device
+ * @handle: the object handle
+ *
+ * Destroy a handle that was created via omap_gem_dumb_create.
+ */
+int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
+ uint32_t handle)
+{
+ /* No special work needed, drop the reference and see what falls out */
+ return drm_gem_handle_delete(file, handle);
+}
+
+/**
+ * omap_gem_dumb_map - buffer mapping for dumb interface
+ * @file: our drm client file
+ * @dev: drm device
+ * @handle: GEM handle to the object (from dumb_create)
+ *
+ * Do the necessary setup to allow the mapping of the frame buffer
+ * into user memory. We don't have to do much here at the moment.
+ */
+int omap_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev,
+ uint32_t handle, uint64_t *offset)
+{
+ struct drm_gem_object *obj;
+ int ret = 0;
+
+ mutex_lock(&dev->struct_mutex);
+
+ /* GEM does all our handle to object mapping */
+ obj = drm_gem_object_lookup(dev, file, handle);
+ if (obj == NULL) {
+ ret = -ENOENT;
+ goto fail;
+ }
+
+ *offset = omap_gem_mmap_offset(obj);
+
+ drm_gem_object_unreference_unlocked(obj);
+
+fail:
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+}
+
+/* Get physical address for DMA.. if 'remap' is true, and the buffer is not
+ * already contiguous, remap it to pin in physically contiguous memory.. (ie.
+ * map in TILER)
+ */
+int omap_gem_get_paddr(struct drm_gem_object *obj,
+ dma_addr_t *paddr, bool remap)
+{
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ int ret = 0;
+
+ if (is_shmem(obj)) {
+ /* TODO: remap to TILER */
+ return -ENOMEM;
+ }
+
+ *paddr = omap_obj->paddr;
+
+ return ret;
+}
+
+/* Release physical address, when DMA is no longer being performed.. this
+ * could potentially unpin and unmap buffers from TILER
+ */
+int omap_gem_put_paddr(struct drm_gem_object *obj)
+{
+ /* do something here when remap to TILER is used.. */
+ return 0;
+}
+
+/* acquire pages when needed (for example, for DMA where physically
+ * contiguous buffer is not required
+ */
+static int get_pages(struct drm_gem_object *obj, struct page ***pages)
+{
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ int ret = 0;
+
+ if (is_shmem(obj) && !omap_obj->pages) {
+ ret = omap_gem_attach_pages(obj);
+ if (ret) {
+ dev_err(obj->dev->dev, "could not attach pages\n");
+ return ret;
+ }
+ }
+
+ /* TODO: even phys-contig.. we should have a list of pages? */
+ *pages = omap_obj->pages;
+
+ return 0;
+}
+
+int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages)
+{
+ int ret;
+ mutex_lock(&obj->dev->struct_mutex);
+ ret = get_pages(obj, pages);
+ mutex_unlock(&obj->dev->struct_mutex);
+ return ret;
+}
+
+/* release pages when DMA no longer being performed */
+int omap_gem_put_pages(struct drm_gem_object *obj)
+{
+ /* do something here if we dynamically attach/detach pages.. at
+ * least they would no longer need to be pinned if everyone has
+ * released the pages..
+ */
+ return 0;
+}
+
+/* Get kernel virtual address for CPU access.. only buffers that are
+ * allocated contiguously have a kernel virtual address, so this more
+ * or less only exists for omap_fbdev
+ */
+void *omap_gem_vaddr(struct drm_gem_object *obj)
+{
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ return omap_obj->vaddr;
+}
+
+/* Buffer Synchronization:
+ */
+
+struct omap_gem_sync_waiter {
+ struct list_head list;
+ struct omap_gem_object *omap_obj;
+ enum omap_gem_op op;
+ uint32_t read_target, write_target;
+ /* notify called w/ sync_lock held */
+ void (*notify)(void *arg);
+ void *arg;
+};
+
+/* list of omap_gem_sync_waiter.. the notify fxn gets called back when
+ * the read and/or write target count is achieved which can call a user
+ * callback (ex. to kick 3d and/or 2d), wakeup blocked task (prep for
+ * cpu access), etc.
+ */
+static LIST_HEAD(waiters);
+
+static inline bool is_waiting(struct omap_gem_sync_waiter *waiter)
+{
+ struct omap_gem_object *omap_obj = waiter->omap_obj;
+ if ((waiter->op & OMAP_GEM_READ) &&
+ (omap_obj->sync->read_complete < waiter->read_target))
+ return true;
+ if ((waiter->op & OMAP_GEM_WRITE) &&
+ (omap_obj->sync->write_complete < waiter->write_target))
+ return true;
+ return false;
+}
+
+/* macro for sync debug.. */
+#define SYNCDBG 0
+#define SYNC(fmt, ...) do { if (SYNCDBG) \
+ printk(KERN_ERR "%s:%d: "fmt"\n", \
+ __func__, __LINE__, ##__VA_ARGS__); \
+ } while (0)
+
+
+static void sync_op_update(void)
+{
+ struct omap_gem_sync_waiter *waiter, *n;
+ list_for_each_entry_safe(waiter, n, &waiters, list) {
+ if (!is_waiting(waiter)) {
+ list_del(&waiter->list);
+ SYNC("notify: %p", waiter);
+ waiter->notify(waiter->arg);
+ kfree(waiter);
+ }
+ }
+}
+
+static inline int sync_op(struct drm_gem_object *obj,
+ enum omap_gem_op op, bool start)
+{
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ int ret = 0;
+
+ spin_lock(&sync_lock);
+
+ if (!omap_obj->sync) {
+ omap_obj->sync = kzalloc(sizeof(*omap_obj->sync), GFP_ATOMIC);
+ if (!omap_obj->sync) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+ }
+
+ if (start) {
+ if (op & OMAP_GEM_READ)
+ omap_obj->sync->read_pending++;
+ if (op & OMAP_GEM_WRITE)
+ omap_obj->sync->write_pending++;
+ } else {
+ if (op & OMAP_GEM_READ)
+ omap_obj->sync->read_complete++;
+ if (op & OMAP_GEM_WRITE)
+ omap_obj->sync->write_complete++;
+ sync_op_update();
+ }
+
+unlock:
+ spin_unlock(&sync_lock);
+
+ return ret;
+}
+
+/* it is a bit lame to handle updates in this sort of polling way, but
+ * in case of PVR, the GPU can directly update read/write complete
+ * values, and not really tell us which ones it updated.. this also
+ * means that sync_lock is not quite sufficient. So we'll need to
+ * do something a bit better when it comes time to add support for
+ * separate 2d hw..
+ */
+void omap_gem_op_update(void)
+{
+ spin_lock(&sync_lock);
+ sync_op_update();
+ spin_unlock(&sync_lock);
+}
+
+/* mark the start of read and/or write operation */
+int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op)
+{
+ return sync_op(obj, op, true);
+}
+
+int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op)
+{
+ return sync_op(obj, op, false);
+}
+
+static DECLARE_WAIT_QUEUE_HEAD(sync_event);
+
+static void sync_notify(void *arg)
+{
+ struct task_struct **waiter_task = arg;
+ *waiter_task = NULL;
+ wake_up_all(&sync_event);
+}
+
+int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op)
+{
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ int ret = 0;
+ if (omap_obj->sync) {
+ struct task_struct *waiter_task = current;
+ struct omap_gem_sync_waiter *waiter =
+ kzalloc(sizeof(*waiter), GFP_KERNEL);
+
+ if (!waiter) {
+ return -ENOMEM;
+ }
+
+ waiter->omap_obj = omap_obj;
+ waiter->op = op;
+ waiter->read_target = omap_obj->sync->read_pending;
+ waiter->write_target = omap_obj->sync->write_pending;
+ waiter->notify = sync_notify;
+ waiter->arg = &waiter_task;
+
+ spin_lock(&sync_lock);
+ if (is_waiting(waiter)) {
+ SYNC("waited: %p", waiter);
+ list_add_tail(&waiter->list, &waiters);
+ spin_unlock(&sync_lock);
+ ret = wait_event_interruptible(sync_event,
+ (waiter_task == NULL));
+ spin_lock(&sync_lock);
+ if (waiter_task) {
+ SYNC("interrupted: %p", waiter);
+ /* we were interrupted */
+ list_del(&waiter->list);
+ waiter_task = NULL;
+ } else {
+ /* freed in sync_op_update() */
+ waiter = NULL;
+ }
+ }
+ spin_unlock(&sync_lock);
+
+ if (waiter) {
+ kfree(waiter);
+ }
+ }
+ return ret;
+}
+
+/* call fxn(arg), either synchronously or asynchronously if the op
+ * is currently blocked.. fxn() can be called from any context
+ *
+ * (TODO for now fxn is called back from whichever context calls
+ * omap_gem_op_update().. but this could be better defined later
+ * if needed)
+ *
+ * TODO more code in common w/ _sync()..
+ */
+int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op,
+ void (*fxn)(void *arg), void *arg)
+{
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ if (omap_obj->sync) {
+ struct omap_gem_sync_waiter *waiter =
+ kzalloc(sizeof(*waiter), GFP_ATOMIC);
+
+ if (!waiter) {
+ return -ENOMEM;
+ }
+
+ waiter->omap_obj = omap_obj;
+ waiter->op = op;
+ waiter->read_target = omap_obj->sync->read_pending;
+ waiter->write_target = omap_obj->sync->write_pending;
+ waiter->notify = fxn;
+ waiter->arg = arg;
+
+ spin_lock(&sync_lock);
+ if (is_waiting(waiter)) {
+ SYNC("waited: %p", waiter);
+ list_add_tail(&waiter->list, &waiters);
+ spin_unlock(&sync_lock);
+ return 0;
+ }
+
+ spin_unlock(&sync_lock);
+ }
+
+ /* no waiting.. */
+ fxn(arg);
+
+ return 0;
+}
+
+/* special API so PVR can update the buffer to use a sync-object allocated
+ * from it's sync-obj heap. Only used for a newly allocated (from PVR's
+ * perspective) sync-object, so we overwrite the new syncobj w/ values
+ * from the already allocated syncobj (if there is one)
+ */
+int omap_gem_set_sync_object(struct drm_gem_object *obj, void *syncobj)
+{
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+ int ret = 0;
+
+ spin_lock(&sync_lock);
+
+ if ((omap_obj->flags & OMAP_BO_EXT_SYNC) && !syncobj) {
+ /* clearing a previously set syncobj */
+ syncobj = kzalloc(sizeof(*omap_obj->sync), GFP_ATOMIC);
+ if (!syncobj) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+ memcpy(syncobj, omap_obj->sync, sizeof(*omap_obj->sync));
+ omap_obj->flags &= ~OMAP_BO_EXT_SYNC;
+ omap_obj->sync = syncobj;
+ } else if (syncobj && !(omap_obj->flags & OMAP_BO_EXT_SYNC)) {
+ /* replacing an existing syncobj */
+ if (omap_obj->sync) {
+ memcpy(syncobj, omap_obj->sync, sizeof(*omap_obj->sync));
+ kfree(omap_obj->sync);
+ }
+ omap_obj->flags |= OMAP_BO_EXT_SYNC;
+ omap_obj->sync = syncobj;
+ }
+
+unlock:
+ spin_unlock(&sync_lock);
+ return ret;
+}
+
+int omap_gem_init_object(struct drm_gem_object *obj)
+{
+ return -EINVAL; /* unused */
+}
+
+/* don't call directly.. called from GEM core when it is time to actually
+ * free the object..
+ */
+void omap_gem_free_object(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct omap_gem_object *omap_obj = to_omap_bo(obj);
+
+ if (obj->map_list.map) {
+ drm_gem_free_mmap_offset(obj);
+ }
+
+ /* don't free externally allocated backing memory */
+ if (!(omap_obj->flags & OMAP_BO_EXT_MEM)) {
+ if (omap_obj->pages) {
+ omap_gem_detach_pages(obj);
+ }
+ if (!is_shmem(obj)) {
+ dma_free_writecombine(dev->dev, obj->size,
+ omap_obj->vaddr, omap_obj->paddr);
+ }
+ }
+
+ /* don't free externally allocated syncobj */
+ if (!(omap_obj->flags & OMAP_BO_EXT_SYNC)) {
+ kfree(omap_obj->sync);
+ }
+
+ drm_gem_object_release(obj);
+
+ kfree(obj);
+}
+
+/* convenience method to construct a GEM buffer object, and userspace handle */
+int omap_gem_new_handle(struct drm_device *dev, struct drm_file *file,
+ union omap_gem_size gsize, uint32_t flags, uint32_t *handle)
+{
+ struct drm_gem_object *obj;
+ int ret;
+
+ obj = omap_gem_new(dev, gsize, flags);
+ if (!obj)
+ return -ENOMEM;
+
+ ret = drm_gem_handle_create(file, obj, handle);
+ if (ret) {
+ drm_gem_object_release(obj);
+ kfree(obj); /* TODO isn't there a dtor to call? just copying i915 */
+ return ret;
+ }
+
+ /* drop reference from allocate - handle holds it now */
+ drm_gem_object_unreference_unlocked(obj);
+
+ return 0;
+}
+
+/* GEM buffer object constructor */
+struct drm_gem_object *omap_gem_new(struct drm_device *dev,
+ union omap_gem_size gsize, uint32_t flags)
+{
+ struct omap_gem_object *omap_obj;
+ struct drm_gem_object *obj = NULL;
+ size_t size;
+ int ret;
+
+ if (flags & OMAP_BO_TILED) {
+ /* TODO: not implemented yet */
+ goto fail;
+ }
+
+ size = PAGE_ALIGN(gsize.bytes);
+
+ omap_obj = kzalloc(sizeof(*omap_obj), GFP_KERNEL);
+ if (!omap_obj) {
+ dev_err(dev->dev, "could not allocate GEM object\n");
+ goto fail;
+ }
+
+ obj = &omap_obj->base;
+
+ if (flags & OMAP_BO_SCANOUT) {
+ /* attempt to allocate contiguous memory */
+ omap_obj->vaddr = dma_alloc_writecombine(dev->dev, size,
+ &omap_obj->paddr, GFP_KERNEL);
+ if (omap_obj->vaddr) {
+ flags |= OMAP_BO_DMA;
+ }
+ }
+
+ omap_obj->flags = flags;
+
+ if (flags & (OMAP_BO_DMA|OMAP_BO_EXT_MEM)) {
+ ret = drm_gem_private_object_init(dev, obj, size);
+ } else {
+ ret = drm_gem_object_init(dev, obj, size);
+ }
+
+ if (ret) {
+ goto fail;
+ }
+
+ return obj;
+
+fail:
+ if (obj) {
+ omap_gem_free_object(obj);
+ }
+ return NULL;
+}
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_gem_helpers.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* temporary copy of drm_gem_{get,put}_pages() until the
+ * "drm/gem: add functions to get/put pages" patch is merged..
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/shmem_fs.h>
+
+#include <drm/drmP.h>
+
+/**
+ * drm_gem_get_pages - helper to allocate backing pages for a GEM object
+ * @obj: obj in question
+ * @gfpmask: gfp mask of requested pages
+ */
+struct page ** _drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask)
+{
+ struct inode *inode;
+ struct address_space *mapping;
+ struct page *p, **pages;
+ int i, npages;
+
+ /* This is the shared memory object that backs the GEM resource */
+ inode = obj->filp->f_path.dentry->d_inode;
+ mapping = inode->i_mapping;
+
+ npages = obj->size >> PAGE_SHIFT;
+
+ pages = drm_malloc_ab(npages, sizeof(struct page *));
+ if (pages == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ gfpmask |= mapping_gfp_mask(mapping);
+
+ for (i = 0; i < npages; i++) {
+ p = shmem_read_mapping_page_gfp(mapping, i, gfpmask);
+ if (IS_ERR(p))
+ goto fail;
+ pages[i] = p;
+
+ /* There is a hypothetical issue w/ drivers that require
+ * buffer memory in the low 4GB.. if the pages are un-
+ * pinned, and swapped out, they can end up swapped back
+ * in above 4GB. If pages are already in memory, then
+ * shmem_read_mapping_page_gfp will ignore the gfpmask,
+ * even if the already in-memory page disobeys the mask.
+ *
+ * It is only a theoretical issue today, because none of
+ * the devices with this limitation can be populated with
+ * enough memory to trigger the issue. But this BUG_ON()
+ * is here as a reminder in case the problem with
+ * shmem_read_mapping_page_gfp() isn't solved by the time
+ * it does become a real issue.
+ *
+ * See this thread: http://lkml.org/lkml/2011/7/11/238
+ */
+ BUG_ON((gfpmask & __GFP_DMA32) &&
+ (page_to_pfn(p) >= 0x00100000UL));
+ }
+
+ return pages;
+
+fail:
+ while (i--) {
+ page_cache_release(pages[i]);
+ }
+ drm_free_large(pages);
+ return ERR_PTR(PTR_ERR(p));
+}
+
+/**
+ * drm_gem_put_pages - helper to free backing pages for a GEM object
+ * @obj: obj in question
+ * @pages: pages to free
+ */
+void _drm_gem_put_pages(struct drm_gem_object *obj, struct page **pages,
+ bool dirty, bool accessed)
+{
+ int i, npages;
+
+ npages = obj->size >> PAGE_SHIFT;
+
+ for (i = 0; i < npages; i++) {
+ if (dirty)
+ set_page_dirty(pages[i]);
+
+ if (accessed)
+ mark_page_accessed(pages[i]);
+
+ /* Undo the reference we took when populating the table */
+ page_cache_release(pages[i]);
+ }
+
+ drm_free_large(pages);
+}
--- /dev/null
+/*
+ * include/drm/omap_priv.h
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_PRIV_H__
+#define __OMAP_PRIV_H__
+
+/* Non-userspace facing APIs
+ */
+
+/* optional platform data to configure the default configuration of which
+ * pipes/overlays/CRTCs are used.. if this is not provided, then instead the
+ * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to
+ * one manager, with priority given to managers that are connected to
+ * detected devices. This should be a good default behavior for most cases,
+ * but yet there still might be times when you wish to do something different.
+ */
+struct omap_drm_platform_data {
+ int ovl_cnt;
+ const int *ovl_ids;
+ int mgr_cnt;
+ const int *mgr_ids;
+ int dev_cnt;
+ const char **dev_names;
+};
+
+#endif /* __OMAP_DRM_H__ */
menuconfig FB_OMAP2
tristate "OMAP2+ frame buffer support"
- depends on FB && OMAP2_DSS
+ depends on FB && OMAP2_DSS && !DRM_OMAP
select OMAP2_VRAM
select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff