bnx2x: fix 'Ethtool -A' when autoneg
authorYuval Mintz <yuvalmin@broadcom.com>
Sun, 2 Dec 2012 04:05:56 +0000 (04:05 +0000)
committerDavid S. Miller <davem@davemloft.net>
Mon, 3 Dec 2012 01:23:00 +0000 (20:23 -0500)
When configuring pauses using 'ethtool -A', the requested values have
effect when used together with autoneg (up to this point, when configured
for autoneg, driver ignored requested pause configuration)

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

index ad280740b13405cc9a54e46fda560dcc2efbcc95..32c3ab72718cad91a7c2a0f9dbfeb9e1e23775ec 100644 (file)
@@ -144,7 +144,7 @@ u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param);
  * @bp:                driver handle
  * @load_mode: current mode
  */
-u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode);
+int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode);
 
 /**
  * bnx2x_link_set - configure hw according to link parameters structure.
index ab65f34bb5410aed3e9ebe383a1bbbc2d783a50c..c8ec3fcd2d35a033ac6f94db20d13548defc3a47 100644 (file)
@@ -2103,22 +2103,25 @@ void bnx2x_calc_fc_adv(struct bnx2x *bp)
        }
 }
 
-u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
+static void bnx2x_set_requested_fc(struct bnx2x *bp)
 {
-       if (!BP_NOMCP(bp)) {
-               u8 rc;
-               int cfx_idx = bnx2x_get_link_cfg_idx(bp);
-               u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx];
-               /*
-                * Initialize link parameters structure variables
-                * It is recommended to turn off RX FC for jumbo frames
-                * for better performance
-                */
-               if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000))
-                       bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
-               else
-                       bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
+       /* Initialize link parameters structure variables
+        * It is recommended to turn off RX FC for jumbo frames
+        *  for better performance
+        */
+       if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000))
+               bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
+       else
+               bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
+}
 
+int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
+{
+       int rc, cfx_idx = bnx2x_get_link_cfg_idx(bp);
+       u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx];
+
+       if (!BP_NOMCP(bp)) {
+               bnx2x_set_requested_fc(bp);
                bnx2x_acquire_phy_lock(bp);
 
                if (load_mode == LOAD_DIAG) {
@@ -2147,11 +2150,11 @@ u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
 
                bnx2x_calc_fc_adv(bp);
 
-               if (CHIP_REV_IS_SLOW(bp) && bp->link_vars.link_up) {
+               if (bp->link_vars.link_up) {
                        bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
                        bnx2x_link_report(bp);
-               } else
-                       queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
+               }
+               queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
                bp->link_params.req_line_speed[cfx_idx] = req_line_speed;
                return rc;
        }
@@ -10315,11 +10318,13 @@ static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
 
                bp->link_params.req_flow_ctrl[idx] = (link_config &
                                         PORT_FEATURE_FLOW_CONTROL_MASK);
-               if ((bp->link_params.req_flow_ctrl[idx] ==
-                    BNX2X_FLOW_CTRL_AUTO) &&
-                   !(bp->port.supported[idx] & SUPPORTED_Autoneg)) {
-                       bp->link_params.req_flow_ctrl[idx] =
-                               BNX2X_FLOW_CTRL_NONE;
+               if (bp->link_params.req_flow_ctrl[idx] ==
+                   BNX2X_FLOW_CTRL_AUTO) {
+                       if (!(bp->port.supported[idx] & SUPPORTED_Autoneg))
+                               bp->link_params.req_flow_ctrl[idx] =
+                                                       BNX2X_FLOW_CTRL_NONE;
+                       else
+                               bnx2x_set_requested_fc(bp);
                }
 
                BNX2X_DEV_INFO("req_line_speed %d  req_duplex %d req_flow_ctrl 0x%x advertising 0x%x\n",