--- /dev/null
+* Samsung's SDHCI Controller device tree bindings
+
+Samsung's SDHCI controller is used as a connectivity interface with external
+MMC, SD and eMMC storage mediums. This file documents differences between the
+core mmc properties described by mmc.txt and the properties used by the
+Samsung implmentation of the SDHCI controller.
+
+Note: The mmc core bindings documentation states that if none of the core
+card-detect bindings are used, then the standard sdhci card detect mechanism
+is used. The Samsung's SDHCI controller bindings extends this as listed below.
+
+[A] The property "samsung,cd-pinmux-gpio" can be used as stated in the
+ "Optional Board Specific Properties" section below.
+
+[B] If core card-detect bindings and "samsung,cd-pinmux-gpio" property
+ is not specified, it is assumed that there is no card detection
+ mechanism used.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
+ controller.
+ - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci
+ controller.
+
+Required Board Specific Properties:
+- gpios: Should specify the gpios used for clock, command and data lines. The
+ gpio specifier format depends on the gpio controller.
+
+Optional Board Specific Properties:
+- samsung,cd-pinmux-gpio: Specifies the card detect line that is routed
+ through a pinmux to the card-detect pin of the card slot. This property
+ should be used only if none of the mmc core card-detect properties are
+ used.
+
+Example:
+ sdhci@12530000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12530000 0x100>;
+ interrupts = <0 75 0>;
+ bus-width = <4>;
+ cd-gpios = <&gpk2 2 2 3 3>;
+ gpios = <&gpk2 0 2 0 3>, /* clock line */
+ <&gpk2 1 2 0 3>, /* command line */
+ <&gpk2 3 2 3 3>, /* data line 0 */
+ <&gpk2 4 2 3 3>, /* data line 1 */
+ <&gpk2 5 2 3 3>, /* data line 2 */
+ <&gpk2 6 2 3 3>; /* data line 3 */
+ };
+
+ Note: This example shows both SoC specific and board specific properties
+ in a single device node. The properties can be actually be seperated
+ into SoC specific node and board specific node.
#define MAX_BUS_CLK (4)
+/* Number of gpio's used is max data bus width + command and clock lines */
+#define NUM_GPIOS(x) (x + 2)
+
/**
* struct sdhci_s3c - S3C SDHCI instance
* @host: The SDHCI host created
* @ioarea: The resource created when we claimed the IO area.
* @pdata: The platform data for this controller.
* @cur_clk: The index of the current bus clock.
+ * @gpios: List of gpio numbers parsed from device tree.
* @clk_io: The clock for the internal bus interface.
* @clk_bus: The clocks that are available for the SD/MMC bus clock.
*/
unsigned int cur_clk;
int ext_cd_irq;
int ext_cd_gpio;
+ int *gpios;
struct clk *clk_io;
struct clk *clk_bus[MAX_BUS_CLK];
}
}
+#ifdef CONFIG_OF
+static int __devinit sdhci_s3c_parse_dt(struct device *dev,
+ struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+ struct device_node *node = dev->of_node;
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ u32 max_width;
+ int gpio, cnt, ret;
+
+ /* if the bus-width property is not specified, assume width as 1 */
+ if (of_property_read_u32(node, "bus-width", &max_width))
+ max_width = 1;
+ pdata->max_width = max_width;
+
+ ourhost->gpios = devm_kzalloc(dev, NUM_GPIOS(pdata->max_width) *
+ sizeof(int), GFP_KERNEL);
+ if (!ourhost->gpios)
+ return -ENOMEM;
+
+ /* get the card detection method */
+ if (of_get_property(node, "broken-cd", 0)) {
+ pdata->cd_type = S3C_SDHCI_CD_NONE;
+ goto setup_bus;
+ }
+
+ if (of_get_property(node, "non-removable", 0)) {
+ pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
+ goto setup_bus;
+ }
+
+ gpio = of_get_named_gpio(node, "cd-gpios", 0);
+ if (gpio_is_valid(gpio)) {
+ pdata->cd_type = S3C_SDHCI_CD_GPIO;
+ goto found_cd;
+ } else if (gpio != -ENOENT) {
+ dev_err(dev, "invalid card detect gpio specified\n");
+ return -EINVAL;
+ }
+
+ gpio = of_get_named_gpio(node, "samsung,cd-pinmux-gpio", 0);
+ if (gpio_is_valid(gpio)) {
+ pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
+ goto found_cd;
+ } else if (gpio != -ENOENT) {
+ dev_err(dev, "invalid card detect gpio specified\n");
+ return -EINVAL;
+ }
+
+ dev_info(dev, "assuming no card detect line available\n");
+ pdata->cd_type = S3C_SDHCI_CD_NONE;
+
+ found_cd:
+ if (pdata->cd_type == S3C_SDHCI_CD_GPIO) {
+ pdata->ext_cd_gpio = gpio;
+ ourhost->ext_cd_gpio = -1;
+ if (of_get_property(node, "cd-inverted", NULL))
+ pdata->ext_cd_gpio_invert = 1;
+ } else if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ ret = gpio_request(gpio, "sdhci-cd");
+ if (ret) {
+ dev_err(dev, "card detect gpio request failed\n");
+ return -EINVAL;
+ }
+ ourhost->ext_cd_gpio = gpio;
+ }
+
+ setup_bus:
+ /* get the gpios for command, clock and data lines */
+ for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
+ gpio = of_get_gpio(node, cnt);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "invalid gpio[%d]\n", cnt);
+ goto err_free_dt_cd_gpio;
+ }
+ ourhost->gpios[cnt] = gpio;
+ }
+
+ for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
+ ret = gpio_request(ourhost->gpios[cnt], "sdhci-gpio");
+ if (ret) {
+ dev_err(dev, "gpio[%d] request failed\n", cnt);
+ goto err_free_dt_gpios;
+ }
+ }
+
+ return 0;
+
+ err_free_dt_gpios:
+ while (--cnt >= 0)
+ gpio_free(ourhost->gpios[cnt]);
+ err_free_dt_cd_gpio:
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
+ gpio_free(ourhost->ext_cd_gpio);
+ return -EINVAL;
+}
+#else
+static int __devinit sdhci_s3c_parse_dt(struct device *dev,
+ struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+ return -EINVAL;
+}
+#endif
+
+static const struct of_device_id sdhci_s3c_dt_match[];
+
static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
struct platform_device *pdev)
{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
+ return (struct sdhci_s3c_drv_data *)match->data;
+ }
+#endif
return (struct sdhci_s3c_drv_data *)
platform_get_device_id(pdev)->driver_data;
}
struct resource *res;
int ret, irq, ptr, clks;
- if (!pdev->dev.platform_data) {
+ if (!pdev->dev.platform_data && !pdev->dev.of_node) {
dev_err(dev, "no device data specified\n");
return -ENOENT;
}
dev_err(dev, "sdhci_alloc_host() failed\n");
return PTR_ERR(host);
}
+ sc = sdhci_priv(host);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
ret = -ENOMEM;
- goto err_io_clk;
+ goto err_pdata;
+ }
+
+ if (pdev->dev.of_node) {
+ ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
+ if (ret)
+ goto err_pdata;
+ } else {
+ memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+ sc->ext_cd_gpio = -1; /* invalid gpio number */
}
- memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
drv_data = sdhci_s3c_get_driver_data(pdev);
- sc = sdhci_priv(host);
sc->host = host;
sc->pdev = pdev;
sc->pdata = pdata;
- sc->ext_cd_gpio = -1; /* invalid gpio number */
platform_set_drvdata(pdev, host);
clk_put(sc->clk_io);
err_io_clk:
+ for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
+ gpio_free(sc->gpios[ptr]);
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
+ gpio_free(sc->ext_cd_gpio);
+
+ err_pdata:
sdhci_free_host(host);
return ret;
static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
{
- struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_s3c *sc = sdhci_priv(host);
+ struct s3c_sdhci_platdata *pdata = sc->pdata;
int ptr;
if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
clk_disable(sc->clk_io);
clk_put(sc->clk_io);
+ if (pdev->dev.of_node) {
+ for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
+ gpio_free(sc->gpios[ptr]);
+ }
+
sdhci_free_host(host);
platform_set_drvdata(pdev, NULL);
};
MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_s3c_dt_match[] = {
+ { .compatible = "samsung,s3c6410-sdhci", },
+ { .compatible = "samsung,exynos4210-sdhci",
+ .data = (void *)EXYNOS4_SDHCI_DRV_DATA },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
+#endif
+
static struct platform_driver sdhci_s3c_driver = {
.probe = sdhci_s3c_probe,
.remove = __devexit_p(sdhci_s3c_remove),
.driver = {
.owner = THIS_MODULE,
.name = "s3c-sdhci",
+ .of_match_table = of_match_ptr(sdhci_s3c_dt_match),
.pm = SDHCI_S3C_PMOPS,
},
};
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff