video: hx8357: Make IM pins optional

The IM pins of the HX8357 controller are used to define the interface
used to feed pixel stream to the LCD panel.

Most of the time, these pins are directly routed to either the ground or
the VCC to set their values.

Remove the need to assign GPIOs to these pins when we are in such a case.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index a0482b567bfe2cf9af2f58d9a8e4e6697686a6b7..47237fa73b0c381d29c0a997b06b4766e7351451 100644 (file)
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -76,6 +76,7 @@ struct hx8357_data {
        unsigned                reset;
        struct spi_device       *spi;
        int                     state;
+       bool                    use_im_pins;
 };
 
 static u8 hx8357_seq_power[] = {
@@ -250,9 +251,11 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
         * Set the interface selection pins to SPI mode, with three
         * wires
         */
-       gpio_set_value_cansleep(lcd->im_pins[0], 1);
-       gpio_set_value_cansleep(lcd->im_pins[1], 0);
-       gpio_set_value_cansleep(lcd->im_pins[2], 1);
+       if (lcd->use_im_pins) {
+               gpio_set_value_cansleep(lcd->im_pins[0], 1);
+               gpio_set_value_cansleep(lcd->im_pins[1], 0);
+               gpio_set_value_cansleep(lcd->im_pins[2], 1);
+       }
 
        /* Reset the screen */
        gpio_set_value(lcd->reset, 1);
@@ -424,25 +427,32 @@ static int hx8357_probe(struct spi_device *spi)
                return -EINVAL;
        }
 
-       for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
-               lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
-                                               "im-gpios", i);
-               if (lcd->im_pins[i] == -EPROBE_DEFER) {
-                       dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
-                       return -EPROBE_DEFER;
-               }
-               if (!gpio_is_valid(lcd->im_pins[i])) {
-                       dev_err(&spi->dev, "Missing dt property: im-gpios\n");
-                       return -EINVAL;
-               }
-
-               ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
-                                       GPIOF_OUT_INIT_LOW, "im_pins");
-               if (ret) {
-                       dev_err(&spi->dev, "failed to request gpio %d: %d\n",
-                               lcd->im_pins[i], ret);
-                       return -EINVAL;
+       if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
+               lcd->use_im_pins = 1;
+
+               for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
+                       lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
+                                                           "im-gpios", i);
+                       if (lcd->im_pins[i] == -EPROBE_DEFER) {
+                               dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
+                               return -EPROBE_DEFER;
+                       }
+                       if (!gpio_is_valid(lcd->im_pins[i])) {
+                               dev_err(&spi->dev, "Missing dt property: im-gpios\n");
+                               return -EINVAL;
+                       }
+
+                       ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
+                                                   GPIOF_OUT_INIT_LOW,
+                                                   "im_pins");
+                       if (ret) {
+                               dev_err(&spi->dev, "failed to request gpio %d: %d\n",
+                                       lcd->im_pins[i], ret);
+                               return -EINVAL;
+                       }
                }
+       } else {
+               lcd->use_im_pins = 0;
        }
 
        lcdev = lcd_device_register("mxsfb", &spi->dev, lcd, &hx8357_ops);