microblaze: Support timer on AXI lite

New microblaze systems uses two buses. One for memories
and flashes and the second for low-speed peripherals
which can run on different CLK. This is the reason
why the kernel is trying to read clock-frequency
directly from node. If there is then the kernel will
work with it. If not then cpu CLK is used.

Signed-off-by: Michal Simek <monstr@monstr.eu>

diff --git a/arch/microblaze/include/asm/cpuinfo.h b/arch/microblaze/include/asm/cpuinfo.h
index 7fab800496ae27baae2fa3b78d5c2ae26ae73694..cd257537ae5445a4fcd1cbf0defa4d5407b08102 100644 (file)
--- a/arch/microblaze/include/asm/cpuinfo.h
+++ b/arch/microblaze/include/asm/cpuinfo.h
@@ -77,7 +77,6 @@ struct cpuinfo {
        u32 num_rd_brk;
        u32 num_wr_brk;
        u32 cpu_clock_freq; /* store real freq of cpu */
-       u32 freq_div_hz; /* store freq/HZ */
 
        /* FPGA family */
        u32 fpga_family_code;

diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index fcb97e86003df8634500b181ab84c87ce6dea977..a5aa33db1df3c934cfef3691d0fe494409c47642 100644 (file)
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -38,6 +38,9 @@ static unsigned int timer_baseaddr;
 #define TIMER_BASE     timer_baseaddr
 #endif
 
+unsigned int freq_div_hz;
+unsigned int timer_clock_freq;
+
 #define TCSR0  (0x00)
 #define TLR0   (0x04)
 #define TCR0   (0x08)
@@ -115,7 +118,7 @@ static void microblaze_timer_set_mode(enum clock_event_mode mode,
        switch (mode) {
        case CLOCK_EVT_MODE_PERIODIC:
                printk(KERN_INFO "%s: periodic\n", __func__);
-               microblaze_timer0_start_periodic(cpuinfo.freq_div_hz);
+               microblaze_timer0_start_periodic(freq_div_hz);
                break;
        case CLOCK_EVT_MODE_ONESHOT:
                printk(KERN_INFO "%s: oneshot\n", __func__);
@@ -168,7 +171,7 @@ static struct irqaction timer_irqaction = {
 static __init void microblaze_clockevent_init(void)
 {
        clockevent_microblaze_timer.mult =
-               div_sc(cpuinfo.cpu_clock_freq, NSEC_PER_SEC,
+               div_sc(timer_clock_freq, NSEC_PER_SEC,
                                clockevent_microblaze_timer.shift);
        clockevent_microblaze_timer.max_delta_ns =
                clockevent_delta2ns((u32)~0, &clockevent_microblaze_timer);
@@ -201,7 +204,7 @@ static struct cyclecounter microblaze_cc = {
 
 int __init init_microblaze_timecounter(void)
 {
-       microblaze_cc.mult = div_sc(cpuinfo.cpu_clock_freq, NSEC_PER_SEC,
+       microblaze_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC,
                                microblaze_cc.shift);
 
        timecounter_init(&microblaze_tc, &microblaze_cc, sched_clock());
@@ -221,7 +224,7 @@ static struct clocksource clocksource_microblaze = {
 static int __init microblaze_clocksource_init(void)
 {
        clocksource_microblaze.mult =
-                       clocksource_hz2mult(cpuinfo.cpu_clock_freq,
+                       clocksource_hz2mult(timer_clock_freq,
                                                clocksource_microblaze.shift);
        if (clocksource_register(&clocksource_microblaze))
                panic("failed to register clocksource");
@@ -247,6 +250,7 @@ void __init time_init(void)
        u32 irq, i = 0;
        u32 timer_num = 1;
        struct device_node *timer = NULL;
+       const void *prop;
 #ifdef CONFIG_SELFMOD_TIMER
        unsigned int timer_baseaddr = 0;
        int arr_func[] = {
@@ -286,7 +290,14 @@ void __init time_init(void)
        printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n",
                timer_list[i], timer_baseaddr, irq);
 
-       cpuinfo.freq_div_hz = cpuinfo.cpu_clock_freq / HZ;
+       /* If there is clock-frequency property than use it */
+       prop = of_get_property(timer, "clock-frequency", NULL);
+       if (prop)
+               timer_clock_freq = be32_to_cpup(prop);
+       else
+               timer_clock_freq = cpuinfo.cpu_clock_freq;
+
+       freq_div_hz = timer_clock_freq / HZ;
 
        setup_irq(irq, &timer_irqaction);
 #ifdef CONFIG_HEART_BEAT