maxcpus=2 will only boot 2. You can choose to bring the
other cpus later online, read FAQ's for more info.
-additional_cpus=n [x86_64, s390 only] use this to limit hotpluggable cpus.
- This option sets
+additional_cpus*=n Use this to limit hotpluggable cpus. This option sets
cpu_possible_map = cpu_present_map + additional_cpus
+(*) Option valid only for following architectures
+- x86_64, ia64, s390
+
ia64 and x86_64 use the number of disabled local apics in ACPI tables MADT
to determine the number of potentially hot-pluggable cpus. The implementation
should only rely on this to count the #of cpus, but *MUST* not rely on the
mark such hot-pluggable cpus as disabled entries, one could use this
parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map.
+s390 uses the number of cpus it detects at IPL time to also the number of bits
+in cpu_possible_map. If it is desired to add additional cpus at a later time
+the number should be specified using this option or the possible_cpus option.
possible_cpus=n [s390 only] use this to set hotpluggable cpus.
This option sets possible_cpus bits in
probing is also known to cause trouble in at least one case (see
bug #5889.)
Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: mount/umount uevents
+When: February 2007
+Why: These events are not correct, and do not properly let userspace know
+ when a file system has been mounted or unmounted. Userspace should
+ poll the /proc/mounts file instead to detect this properly.
+Who: Greg Kroah-Hartman <gregkh@suse.de>
Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
+2.1.26:
+ - Implement support for sector sizes above 512 bytes (up to the maximum
+ supported by NTFS which is 4096 bytes).
+ - Enhance support for NTFS volumes which were supported by Windows but
+ not by Linux due to invalid attribute list attribute flags.
+ - A few minor updates and bug fixes.
2.1.25:
- Write support is now extended with write(2) being able to both
overwrite existing file data and to extend files. Also, if a write
tmpfs has a mount option to set the NUMA memory allocation policy for
-all files in that instance:
-mpol=interleave prefers to allocate memory from each node in turn
-mpol=default prefers to allocate memory from the local node
-mpol=bind prefers to allocate from mpol_nodelist
-mpol=preferred prefers to allocate from first node in mpol_nodelist
+all files in that instance (if CONFIG_NUMA is enabled) - which can be
+adjusted on the fly via 'mount -o remount ...'
-The following mount option is used in conjunction with mpol=interleave,
-mpol=bind or mpol=preferred:
-mpol_nodelist: nodelist suitable for parsing with nodelist_parse.
+mpol=default prefers to allocate memory from the local node
+mpol=prefer:Node prefers to allocate memory from the given Node
+mpol=bind:NodeList allocates memory only from nodes in NodeList
+mpol=interleave prefers to allocate from each node in turn
+mpol=interleave:NodeList allocates from each node of NodeList in turn
+
+NodeList format is a comma-separated list of decimal numbers and ranges,
+a range being two hyphen-separated decimal numbers, the smallest and
+largest node numbers in the range. For example, mpol=bind:0-3,5,7,9-15
+
+Note that trying to mount a tmpfs with an mpol option will fail if the
+running kernel does not support NUMA; and will fail if its nodelist
+specifies a node >= MAX_NUMNODES. If your system relies on that tmpfs
+being mounted, but from time to time runs a kernel built without NUMA
+capability (perhaps a safe recovery kernel), or configured to support
+fewer nodes, then it is advisable to omit the mpol option from automatic
+mount options. It can be added later, when the tmpfs is already mounted
+on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'.
To specify the initial root directory you can use the following mount
Author:
Christoph Rohland <cr@sap.com>, 1.12.01
Updated:
- Hugh Dickins <hugh@veritas.com>, 13 March 2005
+ Hugh Dickins <hugh@veritas.com>, 19 February 2006
port=n port to connect to on the remote server
- timeout=n request timeouts (in ms) (default 60000ms)
-
noextend force legacy mode (no 9P2000.u semantics)
uid attempt to mount as a particular uid
RESOURCES
=========
-The Linux version of the 9P server, along with some client-side utilities
-can be found at http://v9fs.sf.net (along with a CVS repository of the
-development branch of this module). There are user and developer mailing
-lists here, as well as a bug-tracker.
+The Linux version of the 9P server is now maintained under the npfs project
+on sourceforge (http://sourceforge.net/projects/npfs).
+
+There are user and developer mailing lists available through the v9fs project
+on sourceforge (http://sourceforge.net/projects/v9fs).
+
+News and other information is maintained on SWiK (http://swik.net/v9fs).
+
+Bug reports may be issued through the kernel.org bugzilla
+(http://bugzilla.kernel.org)
For more information on the Plan 9 Operating System check out
http://plan9.bell-labs.com/plan9
Currently, these files might (depending on your configuration)
show up in /proc/sys/kernel:
+- acpi_video_flags
- acct
- core_pattern
- core_uses_pid
==============================================================
+acpi_video_flags:
+
+flags
+
+See Doc*/kernel/power/video.txt, it allows mode of video boot to be
+set during run time.
+
+==============================================================
+
acct:
highwater lowwater frequency
apicmaintimer. Useful when your PIT timer is totally
broken.
+ disable_8254_timer / enable_8254_timer
+ Enable interrupt 0 timer routing over the 8254 in addition to over
+ the IO-APIC. The kernel tries to set a sensible default.
+
Early Console
syntax: earlyprintk=vga
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
NAME=Sliding Snow Leopard
# *DOCUMENTATION*
/*
* Calculate the next alarm time given the requested alarm time mask
* and the current time.
- *
- * FIXME: for now, we just copy the alarm time because we're lazy (and
- * is therefore buggy - setting a 10am alarm at 8pm will not result in
- * the alarm triggering.)
*/
void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
{
+ unsigned long next_time;
+ unsigned long now_time;
+
next->tm_year = now->tm_year;
next->tm_mon = now->tm_mon;
next->tm_mday = now->tm_mday;
next->tm_hour = alrm->tm_hour;
next->tm_min = alrm->tm_min;
next->tm_sec = alrm->tm_sec;
+
+ rtc_tm_to_time(now, &now_time);
+ rtc_tm_to_time(next, &next_time);
+
+ if (next_time < now_time) {
+ /* Advance one day */
+ next_time += 60 * 60 * 24;
+ rtc_time_to_tm(next_time, next);
+ }
}
static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)
ldr r6, [r2, #TI_CPU_DOMAIN]!
#endif
#if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_MPCORE
+#ifdef CONFIG_CPU_32v6K
clrex
#else
strex r5, r4, [ip] @ Clear exclusive monitor
#include <linux/personality.h>
#include <linux/ptrace.h>
#include <linux/kallsyms.h>
+#include <linux/delay.h>
#include <linux/init.h>
#include <asm/atomic.h>
__die(str, err, thread, regs);
bust_spinlocks(0);
spin_unlock_irq(&die_lock);
+
+ if (panic_on_oops) {
+ printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+ ssleep(5);
+ panic("Fatal exception");
+ }
+
do_exit(SIGSEGV);
}
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
- if (data->pullup_pin)
+ if (data->pullup_pin) {
at91_set_gpio_output(data->pullup_pin, 0);
+ at91_set_multi_drive(data->pullup_pin, 1);
+ }
udc_data = *data;
platform_device_register(&at91rm9200_udc_device);
}
EXPORT_SYMBOL(at91_set_deglitch);
+/*
+ * enable/disable the multi-driver; This is only valid for output and
+ * allows the output pin to run as an open collector output.
+ */
+int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_multi_drive);
+
/*--------------------------------------------------------------------------*/
gpio = &irq_desc[pin];
while (isr) {
- if (isr & 1)
- gpio->handle(pin, gpio, regs);
+ if (isr & 1) {
+ if (unlikely(gpio->disable_depth)) {
+ /*
+ * The core ARM interrupt handler lazily disables IRQs so
+ * another IRQ must be generated before it actually gets
+ * here to be disabled on the GPIO controller.
+ */
+ gpio_irq_mask(pin);
+ }
+ else
+ gpio->handle(pin, gpio, regs);
+ }
pin++;
gpio++;
isr >>= 1;
if (line < 0)
return -EINVAL;
- if (type & IRQT_BOTHEDGE) {
+ switch (type){
+ case IRQT_BOTHEDGE:
int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
irq_type = IXP4XX_IRQ_EDGE;
- } else if (type & IRQT_RISING) {
+ break;
+ case IRQT_RISING:
int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
- } else if (type & IRQT_FALLING) {
+ break;
+ case IRQT_FALLING:
int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
- } else if (type & IRQT_HIGH) {
+ break;
+ case IRQT_HIGH:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP4XX_IRQ_LEVEL;
- } else if (type & IRQT_LOW) {
+ break;
+ case IRQT_LOW:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP4XX_IRQ_LEVEL;
- } else
+ break;
+ default:
return -EINVAL;
-
+ }
ixp4xx_config_irq(irq, irq_type);
if (line >= 8) { /* pins 8-15 */
static void __exit nslu2_power_exit(void)
{
+ if (!(machine_is_nslu2()))
+ return;
+
free_irq(NSLU2_RB_IRQ, NULL);
free_irq(NSLU2_PB_IRQ, NULL);
}
.num_resources = 0,
};
+static struct platform_device nslu2_beeper = {
+ .name = "ixp4xx-beeper",
+ .id = NSLU2_GPIO_BUZZ,
+ .num_resources = 0,
+};
+
static struct resource nslu2_uart_resources[] = {
{
.start = IXP4XX_UART1_BASE_PHYS,
&nslu2_i2c_controller,
&nslu2_flash,
&nslu2_uart,
+ &nslu2_beeper,
};
static void nslu2_power_off(void)
int i;
int myslot = -1;
unsigned long val;
+ void __iomem *local_pci_cfg_base;
+
+ val = __raw_readl(SYS_PCICTL);
+ if (!(val & 1)) {
+ printk("Not plugged into PCI backplane!\n");
+ ret = -EIO;
+ goto out;
+ }
if (nr == 0) {
sys->mem_offset = 0;
goto out;
}
- __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0);
- __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1);
- __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2);
-
- __raw_writel(1, SYS_PCICTL);
-
- val = __raw_readl(SYS_PCICTL);
- if (!(val & 1)) {
- printk("Not plugged into PCI backplane!\n");
- ret = -EIO;
- goto out;
- }
-
/*
* We need to discover the PCI core first to configure itself
* before the main PCI probing is performed
*/
- for (i=0; i<32; i++) {
+ for (i=0; i<32; i++)
if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
(__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
myslot = i;
-
- __raw_writel(myslot, PCI_SELFID);
- val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET);
- val |= (1<<2);
- __raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET);
break;
}
- }
if (myslot == -1) {
printk("Cannot find PCI core!\n");
ret = -EIO;
- } else {
- printk("PCI core found (slot %d)\n",myslot);
- /* Do not to map Versatile FPGA PCI device
- into memory space as we are short of
- mappable memory */
- pci_slot_ignore |= (1 << myslot);
- ret = 1;
+ goto out;
}
+ printk("PCI core found (slot %d)\n",myslot);
+
+ __raw_writel(myslot, PCI_SELFID);
+ local_pci_cfg_base = (void *) VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
+
+ val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
+ val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
+ __raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
+
+ /*
+ * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
+ */
+ __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
+ __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
+ __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
+
+ /*
+ * Do not to map Versatile FPGA PCI device into memory space
+ */
+ pci_slot_ignore |= (1 << myslot);
+ ret = 1;
+
out:
return ret;
}
return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
}
-/*
- * V3_LB_BASE? - local bus address
- * V3_LB_MAP? - pci bus address
- */
void __init pci_versatile_preinit(void)
{
-}
+ __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
+ __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
+ __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
-void __init pci_versatile_postinit(void)
-{
-}
+ __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
+ __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
+ __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
+ __raw_writel(1, SYS_PCICTL);
+}
/*
* map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this.
int irq;
int devslot = PCI_SLOT(dev->devfn);
- /* slot, pin, irq
- 24 1 27
- 25 1 28 untested
- 26 1 29
- 27 1 30 untested
- */
-
- irq = 27 + ((slot + pin + 2) % 3); /* Fudged */
+ /* slot, pin, irq
+ * 24 1 27
+ * 25 1 28
+ * 26 1 29
+ * 27 1 30
+ */
+ irq = 27 + ((slot + pin - 1) & 3);
- printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
+ printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
return irq;
}
.setup = pci_versatile_setup,
.scan = pci_versatile_scan_bus,
.preinit = pci_versatile_preinit,
- .postinit = pci_versatile_postinit,
};
static int __init versatile_pci_init(void)
*/
.align 5
ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_MPCORE
+#ifdef CONFIG_CPU_32v6K
clrex
#else
strex r0, r1, [sp] @ Clear the exclusive monitor
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Jan 9 12:56:42 2006
+# Last update: Mon Feb 20 10:18:02 2006
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
eb42x MACH_EB42X EB42X 891
iq331es MACH_IQ331ES IQ331ES 892
cosydsp MACH_COSYDSP COSYDSP 893
-uplat7d MACH_UPLAT7D UPLAT7D 894
+uplat7d_proto MACH_UPLAT7D UPLAT7D 894
ptdavinci MACH_PTDAVINCI PTDAVINCI 895
mbus MACH_MBUS MBUS 896
nadia2vb MACH_NADIA2VB NADIA2VB 897
ak3220m MACH_AK3320M AK3320M 925
duramax MACH_DURAMAX DURAMAX 926
n35 MACH_N35 N35 927
+pronghorn MACH_PRONGHORN PRONGHORN 928
+fundy MACH_FUNDY FUNDY 929
+logicpd_pxa270 MACH_LOGICPD_PXA270 LOGICPD_PXA270 930
+cpu777 MACH_CPU777 CPU777 931
+simicon9201 MACH_SIMICON9201 SIMICON9201 932
+leap2_hpm MACH_LEAP2_HPM LEAP2_HPM 933
+cm922txa10 MACH_CM922TXA10 CM922TXA10 934
+sandgate MACH_PXA PXA 935
+sandgate2 MACH_SANDGATE2 SANDGATE2 936
+sandgate2g MACH_SANDGATE2G SANDGATE2G 937
+sandgate2p MACH_SANDGATE2P SANDGATE2P 938
+fred_jack MACH_FRED_JACK FRED_JACK 939
+ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940
+nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941
+netdcu8 MACH_NETDCU8 NETDCU8 942
+ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
+ng_fvx538 MACH_NG_FVX538 NG_FVX538 944
+ng_fvs338 MACH_NG_FVS338 NG_FVS338 945
+pnx4103 MACH_PNX4103 PNX4103 946
+hesdb MACH_HESDB HESDB 947
+xsilo MACH_XSILO XSILO 948
+espresso MACH_ESPRESSO ESPRESSO 949
+emlc MACH_EMLC EMLC 950
+sisteron MACH_SISTERON SISTERON 951
+rx1950 MACH_RX1950 RX1950 952
+tsc_venus MACH_TSC_VENUS TSC_VENUS 953
+ds101j MACH_DS101J DS101J 954
+mxc300_30ads MACH_MXC30030ADS MXC30030ADS 955
+fujitsu_wimaxsoc MACH_FUJITSU_WIMAXSOC FUJITSU_WIMAXSOC 956
+dualpcmodem MACH_DUALPCMODEM DUALPCMODEM 957
+gesbc9312 MACH_GESBC9312 GESBC9312 958
help
gdb stub exception support
-config CONFIG_SH_STANDARD_BIOS
+config SH_STANDARD_BIOS
bool "Use gdb protocol serial console"
depends on (!H8300H_SIM && !H8S_SIM)
help
CONFIG_NO_KERNEL_MSG=y
# CONFIG_SYSCALL_PRINT is not set
# CONFIG_GDB_DEBUG is not set
-# CONFIG_CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_DEFAULT_CMDLINE is not set
# CONFIG_BLKDEV_RESERVE is not set
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL
+ depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
- quirks.o i8237.o
+ quirks.o i8237.o topology.o
obj-y += cpu/
obj-y += timers/
extern int gsi_irq_sharing(int gsi);
#include <asm/proto.h>
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
-
-
#else /* X86 */
#ifdef CONFIG_X86_LOCAL_APIC
#include <linux/smp.h>
#include <linux/module.h>
#include <linux/percpu.h>
+#include <linux/bootmem.h>
#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include "cpu.h"
+DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
+EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr);
+
DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
int cpu = smp_processor_id();
struct tss_struct * t = &per_cpu(init_tss, cpu);
struct thread_struct *thread = ¤t->thread;
- struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+ struct desc_struct *gdt;
__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
+ struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
if (cpu_test_and_set(cpu, cpu_initialized)) {
printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
set_in_cr4(X86_CR4_TSD);
}
+ /*
+ * This is a horrible hack to allocate the GDT. The problem
+ * is that cpu_init() is called really early for the boot CPU
+ * (and hence needs bootmem) but much later for the secondary
+ * CPUs, when bootmem will have gone away
+ */
+ if (NODE_DATA(0)->bdata->node_bootmem_map) {
+ gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE);
+ /* alloc_bootmem_pages panics on failure, so no check */
+ memset(gdt, 0, PAGE_SIZE);
+ } else {
+ gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL);
+ if (unlikely(!gdt)) {
+ printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu);
+ for (;;)
+ local_irq_enable();
+ }
+ }
+
/*
* Initialize the per-CPU GDT with the boot GDT,
* and set up the GDT descriptor:
((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
(CPU_16BIT_STACK_SIZE - 1);
- cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
- cpu_gdt_descr[cpu].address = (unsigned long)gdt;
+ cpu_gdt_descr->size = GDT_SIZE - 1;
+ cpu_gdt_descr->address = (unsigned long)gdt;
- load_gdt(&cpu_gdt_descr[cpu]);
+ load_gdt(cpu_gdt_descr);
load_idt(&idt_descr);
/*
*/
local_flush_tlb();
- cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
- load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0]));
+ per_cpu(cpu_gdt_descr, 0).address =
+ __pa(per_cpu(cpu_gdt_descr, 0).address);
+ load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
}
static void efi_call_phys_epilog(void)
{
unsigned long cr4;
- cpu_gdt_descr[0].address =
- (unsigned long) __va(cpu_gdt_descr[0].address);
- load_gdt(&cpu_gdt_descr[0]);
+ per_cpu(cpu_gdt_descr, 0).address =
+ (unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
+ load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
+
cr4 = read_cr4();
if (cr4 & X86_CR4_PSE) {
.quad 0x0000000000000000 /* 0xf0 - unused */
.quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */
- /* Be sure this is zeroed to avoid false validations in Xen */
- .fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0
#include <asm/checksum.h>
#include <asm/desc.h>
-EXPORT_SYMBOL_GPL(cpu_gdt_descr);
-
EXPORT_SYMBOL(__down_failed);
EXPORT_SYMBOL(__down_failed_interruptible);
EXPORT_SYMBOL(__down_failed_trylock);
spin_unlock_irqrestore(&ioapic_lock, flags);
/* Sanity check */
- if (reg_00.bits.ID != apic_id)
- panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+ if (reg_00.bits.ID != apic_id) {
+ printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+ return -1;
+ }
}
apic_printk(APIC_VERBOSE, KERN_INFO
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
+ /* insn: must be on special executable page on i386. */
+ p->ainsn.insn = get_insn_slot();
+ if (!p->ainsn.insn)
+ return -ENOMEM;
+
memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
p->opcode = *p->addr;
return 0;
(unsigned long) p->addr + sizeof(kprobe_opcode_t));
}
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+ down(&kprobe_mutex);
+ free_insn_slot(p->ainsn.insn);
+ up(&kprobe_mutex);
+}
+
static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
kcb->prev_kprobe.kp = kprobe_running();
if (p->opcode == BREAKPOINT_INSTRUCTION)
regs->eip = (unsigned long)p->addr;
else
- regs->eip = (unsigned long)&p->ainsn.insn;
+ regs->eip = (unsigned long)p->ainsn.insn;
}
/* Called with kretprobe_lock held */
{
unsigned long *tos = (unsigned long *)®s->esp;
unsigned long next_eip = 0;
- unsigned long copy_eip = (unsigned long)&p->ainsn.insn;
+ unsigned long copy_eip = (unsigned long)p->ainsn.insn;
unsigned long orig_eip = (unsigned long)p->addr;
switch (p->ainsn.insn[0]) {
* Read the physical hardware table. Anything here will
* override the defaults.
*/
- if (!smp_read_mpc((void *)mpf->mpf_physptr)) {
+ if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
smp_found_config = 0;
printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
u32 gsi_base)
{
int idx = 0;
+ int tmpid;
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15))
- mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+ tmpid = io_apic_get_unique_id(idx, id);
else
- mp_ioapics[idx].mpc_apicid = id;
+ tmpid = id;
+ if (tmpid == -1) {
+ nr_ioapics--;
+ return;
+ }
+ mp_ioapics[idx].mpc_apicid = tmpid;
mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
/*
unsigned long start_eip;
unsigned short nmi_high = 0, nmi_low = 0;
- if (!cpu_gdt_descr[cpu].address &&
- !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
- printk("Failed to allocate GDT for CPU %d\n", cpu);
- return 1;
- }
-
++cpucount;
/*
--- /dev/null
+/*
+ * arch/i386/kernel/topology.c - Populate driverfs with topology information
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/nodemask.h>
+#include <asm/cpu.h>
+
+static struct i386_cpu cpu_devices[NR_CPUS];
+
+int arch_register_cpu(int num){
+ struct node *parent = NULL;
+
+#ifdef CONFIG_NUMA
+ int node = cpu_to_node(num);
+ if (node_online(node))
+ parent = &node_devices[node].node;
+#endif /* CONFIG_NUMA */
+
+ return register_cpu(&cpu_devices[num].cpu, num, parent);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+void arch_unregister_cpu(int num) {
+ struct node *parent = NULL;
+
+#ifdef CONFIG_NUMA
+ int node = cpu_to_node(num);
+ if (node_online(node))
+ parent = &node_devices[node].node;
+#endif /* CONFIG_NUMA */
+
+ return unregister_cpu(&cpu_devices[num].cpu, parent);
+}
+EXPORT_SYMBOL(arch_register_cpu);
+EXPORT_SYMBOL(arch_unregister_cpu);
+#endif /*CONFIG_HOTPLUG_CPU*/
+
+
+
+#ifdef CONFIG_NUMA
+#include <linux/mmzone.h>
+#include <asm/node.h>
+
+struct i386_node node_devices[MAX_NUMNODES];
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for_each_online_node(i)
+ arch_register_node(i);
+
+ for_each_present_cpu(i)
+ arch_register_cpu(i);
+ return 0;
+}
+
+#else /* !CONFIG_NUMA */
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for_each_present_cpu(i)
+ arch_register_cpu(i);
+ return 0;
+}
+
+#endif /* CONFIG_NUMA */
+
+subsys_initcall(topology_init);
# Makefile for the linux kernel.
#
-obj-y := setup.o topology.o
+obj-y := setup.o
+++ /dev/null
-/*
- * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
- *
- * Written by: Matthew Dobson, IBM Corporation
- * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <colpatch@us.ibm.com>
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/nodemask.h>
-#include <asm/cpu.h>
-
-static struct i386_cpu cpu_devices[NR_CPUS];
-
-int arch_register_cpu(int num){
- struct node *parent = NULL;
-
-#ifdef CONFIG_NUMA
- int node = cpu_to_node(num);
- if (node_online(node))
- parent = &node_devices[node].node;
-#endif /* CONFIG_NUMA */
-
- return register_cpu(&cpu_devices[num].cpu, num, parent);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-void arch_unregister_cpu(int num) {
- struct node *parent = NULL;
-
-#ifdef CONFIG_NUMA
- int node = cpu_to_node(num);
- if (node_online(node))
- parent = &node_devices[node].node;
-#endif /* CONFIG_NUMA */
-
- return unregister_cpu(&cpu_devices[num].cpu, parent);
-}
-EXPORT_SYMBOL(arch_register_cpu);
-EXPORT_SYMBOL(arch_unregister_cpu);
-#endif /*CONFIG_HOTPLUG_CPU*/
-
-
-
-#ifdef CONFIG_NUMA
-#include <linux/mmzone.h>
-#include <asm/node.h>
-
-struct i386_node node_devices[MAX_NUMNODES];
-
-static int __init topology_init(void)
-{
- int i;
-
- for_each_online_node(i)
- arch_register_node(i);
-
- for_each_present_cpu(i)
- arch_register_cpu(i);
- return 0;
-}
-
-#else /* !CONFIG_NUMA */
-
-static int __init topology_init(void)
-{
- int i;
-
- for_each_present_cpu(i)
- arch_register_cpu(i);
- return 0;
-}
-
-#endif /* CONFIG_NUMA */
-
-subsys_initcall(topology_init);
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/sysrq.h>
+#include <linux/smp.h>
+#include <linux/nodemask.h>
#include <asm/io.h>
#include <asm/voyager.h>
#include <asm/vic.h>
if (pm_power_off)
pm_power_off();
}
-
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16;
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24;
+ cpu_possible_map = phys_cpu_present_map;
printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]);
/* Here we set up the VIC to enable SMP */
/* enable the CPIs by writing the base vector to their register */
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
ifdef CONFIG_CHIP_VDEC2
cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst
-aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst
+aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -O2 -Wa,-bitinst -Wa,-no-parallel
else
cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2
-aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2
+aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 -O2
endif
cflags-$(CONFIG_ISA_M32R) += -DNO_FPU
-aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -Wa,-no-bitinst
+aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -O2 -Wa,-no-bitinst
CFLAGS += $(cflags-y)
AFLAGS += $(aflags-y)
asmlinkage int
sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
unsigned long r2, unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, struct pt_regs regs)
+ unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
sigset_t saveset, newset;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs.r0 = -EINTR;
+ regs->r0 = -EINTR;
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
- if (do_signal(®s, &saveset))
- return regs.r0;
+ if (do_signal(regs, &saveset))
+ return regs->r0;
}
}
asmlinkage int
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
unsigned long r2, unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, struct pt_regs regs)
+ unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
- return do_sigaltstack(uss, uoss, regs.spu);
+ return do_sigaltstack(uss, uoss, regs->spu);
}
asmlinkage int
sys_rt_sigreturn(unsigned long r0, unsigned long r1,
unsigned long r2, unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, struct pt_regs regs)
+ unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.spu;
+ struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->spu;
sigset_t set;
- stack_t st;
int result;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if (restore_sigcontext(®s, &frame->uc.uc_mcontext, &result))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &result))
goto badframe;
- if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->spu) == -EFAULT)
goto badframe;
- /* It is more difficult to avoid calling this function than to
- call it and ignore errors. */
- do_sigaltstack(&st, NULL, regs.spu);
return result;
/*
* sys_tas() - test-and-set
- * linuxthreads testing version
*/
-#ifndef CONFIG_SMP
-asmlinkage int sys_tas(int *addr)
-{
- int oldval;
- unsigned long flags;
-
- if (!access_ok(VERIFY_WRITE, addr, sizeof (int)))
- return -EFAULT;
- local_irq_save(flags);
- oldval = *addr;
- if (!oldval)
- *addr = 1;
- local_irq_restore(flags);
- return oldval;
-}
-#else /* CONFIG_SMP */
-#include <linux/spinlock.h>
-
-static DEFINE_SPINLOCK(tas_lock);
-
asmlinkage int sys_tas(int *addr)
{
int oldval;
if (!access_ok(VERIFY_WRITE, addr, sizeof (int)))
return -EFAULT;
- _raw_spin_lock(&tas_lock);
- oldval = *addr;
- if (!oldval)
- *addr = 1;
- _raw_spin_unlock(&tas_lock);
+ /* atomic operation:
+ * oldval = *addr; *addr = 1;
+ */
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r4", "%1")
+ " .fillinsn\n"
+ "1:\n"
+ " lock %0, @%1 -> unlock %2, @%1\n"
+ "2:\n"
+ /* NOTE:
+ * The m32r processor can accept interrupts only
+ * at the 32-bit instruction boundary.
+ * So, in the above code, the "unlock" instruction
+ * can be executed continuously after the "lock"
+ * instruction execution without any interruptions.
+ */
+ ".section .fixup,\"ax\"\n"
+ " .balign 4\n"
+ "3: ldi %0, #%3\n"
+ " seth r14, #high(2b)\n"
+ " or3 r14, r14, #low(2b)\n"
+ " jmp r14\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .balign 4\n"
+ " .long 1b,3b\n"
+ ".previous\n"
+ : "=&r" (oldval)
+ : "r" (addr), "r" (1), "i"(-EFAULT)
+ : "r14", "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
return oldval;
}
-#endif /* CONFIG_SMP */
/*
* sys_pipe() is the normal C calling standard for creating
" .balign 4\n" \
" .long 0b,3b\n" \
".previous" \
- : "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \
+ : "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \
"=&r" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \
"4"(dst) \
" .balign 4\n" \
" .long 0b,3b\n" \
".previous" \
- : "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \
+ : "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \
"=&r" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \
"4"(dst) \
for (;;);
}
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
+
void show_regs(struct pt_regs * regs)
{
printk("\n");
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:21 2005
+# Linux kernel version: 2.6.16-rc4
+# Tue Feb 21 13:44:31 2006
#
CONFIG_MIPS=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
#
# SCSI low-level drivers
#
-CONFIG_ISCSI_TCP=m
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# SN Devices
#
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
* one divide.
*/
u64 nsec = (u64)jiffies * TICK_NSEC;
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec);
- value->tv_usec /= NSEC_PER_USEC;
+ long rem;
+ value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+ value->tv_usec = rem / NSEC_PER_USEC;
}
#define ELF_CORE_EFLAGS EF_MIPS_ABI2
* one divide.
*/
u64 nsec = (u64)jiffies * TICK_NSEC;
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec);
- value->tv_usec /= NSEC_PER_USEC;
+ long rem;
+ value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+ value->tv_usec = rem / NSEC_PER_USEC;
}
#undef ELF_CORE_COPY_REGS
long ret;
mm_segment_t old_fs = get_fs();
+ if (!access_ok(VERIFY_WRITE, uinfo, sizeof(*uinfo)))
+ return -EFAULT;
+
set_fs (KERNEL_DS);
ret = sys_waitid(which, pid, uinfo, options,
uru ? (struct rusage __user *) &ru : NULL);
return sys_timer_create(clock, p, timer_id);
}
-asmlinkage long
-sysn32_rt_sigtimedwait(const sigset_t __user *uthese,
- siginfo_t __user *uinfo,
- const struct compat_timespec __user *uts32,
- size_t sigsetsize)
-{
- struct timespec __user *uts = NULL;
-
- if (uts32) {
- struct timespec ts;
- uts = compat_alloc_user_space(sizeof(struct timespec));
- if (get_user(ts.tv_sec, &uts32->tv_sec) ||
- get_user(ts.tv_nsec, &uts32->tv_nsec) ||
- copy_to_user (uts, &ts, sizeof (ts)))
- return -EFAULT;
- }
- return sys_rt_sigtimedwait(uthese, uinfo, uts, sigsetsize);
-}
-
save_static_function(sys32_clone);
__attribute_used__ noinline static int
_sys32_clone(nabi_no_regargs struct pt_regs regs)
sys sys_fstatat64 4
sys sys_unlinkat 3
sys sys_renameat 4 /* 4295 */
- sys sys_linkat 4
+ sys sys_linkat 5
sys sys_symlinkat 3
sys sys_readlinkat 4
sys sys_fchmodat 3
PTR sys_capget
PTR sys_capset
PTR sys32_rt_sigpending /* 6125 */
- PTR sysn32_rt_sigtimedwait
+ PTR compat_sys_rt_sigtimedwait
PTR sys_rt_sigqueueinfo
- PTR sys32_rt_sigsuspend
+ PTR sysn32_rt_sigsuspend
PTR sys32_sigaltstack
PTR compat_sys_utime /* 6130 */
PTR sys_mknod
* for more details.
*
* Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 1994 - 2000, 2006 Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/cache.h>
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
-
/* 32-bit compatibility types */
#define _NSIG_BPW32 32
_sys32_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
compat_sigset_t *uset;
- sigset_t newset, saveset;
+ sigset_t newset;
uset = (compat_sigset_t *) regs.regs[4];
if (get_sigset(&newset, uset))
sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs.regs[2] = EINTR;
- regs.regs[7] = 1;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal32(&saveset, ®s))
- return -EINTR;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
save_static_function(sys32_rt_sigsuspend);
_sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
compat_sigset_t *uset;
- sigset_t newset, saveset;
- size_t sigsetsize;
+ sigset_t newset;
+ size_t sigsetsize;
/* XXX Don't preclude handling different sized sigset_t's. */
sigsetsize = regs.regs[5];
sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs.regs[2] = EINTR;
- regs.regs[7] = 1;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal32(&saveset, ®s))
- return -EINTR;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
asmlinkage int sys32_sigaction(int sig, const struct sigaction32 *act,
regs->regs[2] = EINTR;
break;
case ERESTARTSYS:
- if(!(ka->sa.sa_flags & SA_RESTART)) {
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->regs[2] = EINTR;
break;
}
return ret;
}
-int do_signal32(sigset_t *oldset, struct pt_regs *regs)
+void do_signal32(struct pt_regs *regs)
{
struct k_sigaction ka;
+ sigset_t *oldset;
siginfo_t info;
int signr;
* if so.
*/
if (!user_mode(regs))
- return 1;
+ return;
if (try_to_freeze())
goto no_signal;
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0)
- return handle_signal(signr, &info, &ka, oldset, regs);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+ }
no_signal:
/*
regs->cp0_epc -= 4;
}
}
- return 0;
+
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
}
asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 *act,
#endif
};
+extern void sigset_from_compat (sigset_t *set, compat_sigset_t *compat);
+
+save_static_function(sysn32_rt_sigsuspend);
+__attribute_used__ noinline static int
+_sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
+{
+ compat_sigset_t __user *unewset, uset;
+ size_t sigsetsize;
+ sigset_t newset;
+
+ /* XXX Don't preclude handling different sized sigset_t's. */
+ sigsetsize = regs.regs[5];
+ if (sigsetsize != sizeof(sigset_t))
+ return -EINVAL;
+
+ unewset = (compat_sigset_t __user *) regs.regs[4];
+ if (copy_from_user(&uset, unewset, sizeof(uset)))
+ return -EFAULT;
+ sigset_from_compat (&newset, &uset);
+ sigdelsetmask(&newset, ~_BLOCKABLE);
+
+ spin_lock_irq(¤t->sighand->siglock);
+ current->saved_sigmask = current->blocked;
+ current->blocked = newset;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
+}
+
save_static_function(sysn32_rt_sigreturn);
__attribute_used__ noinline static void
_sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
#include <linux/timex.h>
#include <linux/sched.h>
#include <linux/cpumask.h>
+#include <linux/cpu.h>
#include <asm/atomic.h>
#include <asm/cpu.h>
local_flush_tlb_one(vaddr);
}
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+static int __init topology_init(void)
+{
+ int cpu;
+ int ret;
+
+ for_each_cpu(cpu) {
+ ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
+ if (ret)
+ printk(KERN_WARNING "topology_init: register_cpu %d "
+ "failed (%d)\n", cpu, ret);
+ }
+
+ return 0;
+}
+
+subsys_initcall(topology_init);
+
EXPORT_SYMBOL(flush_tlb_page);
EXPORT_SYMBOL(flush_tlb_one);
EXPORT_SYMBOL(cpu_data);
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1994 - 1999, 2000, 01 Ralf Baechle
+ * Copyright (C) 1994 - 1999, 2000, 01, 06 Ralf Baechle
* Copyright (C) 1995, 1996 Paul M. Antoine
* Copyright (C) 1998 Ulf Carlsson
* Copyright (C) 1999 Silicon Graphics, Inc.
{
siginfo_t info;
+ die_if_kernel("Integer overflow", regs);
+
info.si_code = FPE_INTOVF;
info.si_signo = SIGFPE;
info.si_errno = 0;
sd k0,0x170($0)
sd k1,0x178($0)
-#if CONFIG_SB1_CEX_ALWAYS_FATAL
+#ifdef CONFIG_SB1_CEX_ALWAYS_FATAL
j handle_vec2_sb1
nop
#else
void prom_boot_secondary(int cpu, struct task_struct *idle)
{
unsigned long gp = (unsigned long) task_thread_info(idle);
- unsigned long sp = __KSTK_TOP(idle);
+ unsigned long sp = __KSTK_TOS(idle);
secondary_sp = sp;
secondary_gp = gp;
Build a kernel suitable for running under the GDB simulator.
Primarily adjusts the kernel's notion of time.
-config CONFIG_SB1_CEX_ALWAYS_FATAL
+config SB1_CEX_ALWAYS_FATAL
bool "All cache exceptions considered fatal (no recovery attempted)"
depends on SIBYTE_SB1xxx_SOC
-config CONFIG_SB1_CERR_STALL
+config SB1_CERR_STALL
bool "Stall (rather than panic) on fatal cache error"
depends on SIBYTE_SB1xxx_SOC
#ifdef CONFIG_SMP
static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
{
- int i = 0, old_cpu, cpu, int_on;
+ int i = 0, old_cpu, cpu, int_on, k;
u64 cur_ints;
irq_desc_t *desc = irq_desc + irq;
unsigned long flags;
irq_dirty -= BCM1480_NR_IRQS_HALF;
}
- int k;
for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
int_on = !(cur_ints & (((u64) 1) << irq_dirty));
{
u64 pending;
unsigned int irq_dirty;
+ int k;
/*
* If the interrupt was an HT interrupt, now is the time to
if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
irq_dirty -= BCM1480_NR_IRQS_HALF;
}
- int k;
for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on PPC64
+ depends on PPC64 && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:30 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 10 17:33:08 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
-CONFIG_NR_CPUS=2
+CONFIG_NR_CPUS=4
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
CONFIG_U3_DART=y
CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
+CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
-CONFIG_GENERIC_TBSYNC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_IOMMU_VMERGE=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=y
-# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
#
# Network device support
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
-CONFIG_TIGON3=m
+CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
+CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
# SN Devices
#
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:38 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 10 17:32:14 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
CONFIG_XICS=y
CONFIG_U3_DART=y
CONFIG_MPIC=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
CONFIG_IBMVIO=y
+# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
-CONFIG_GENERIC_TBSYNC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
+# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=y
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
#
# I2O device support
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
#
# Network device support
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
+CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# SN Devices
#
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:40 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 10 17:33:32 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
CONFIG_XICS=y
# CONFIG_U3_DART is not set
CONFIG_MPIC=y
CONFIG_RTAS_FLASH=m
# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
+# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
-# CONFIG_GENERIC_TBSYNC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
+# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# SN Devices
#
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_XMON_DEFAULT=y
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
* the crash CPU will send an IPI and wait for other CPUs to
* respond. If not, proceed the kexec boot even though we failed to
* capture other CPU states.
+ * Delay of at least 10 seconds.
*/
- msecs = 1000000;
+ printk(KERN_ALERT "Sending IPI to other cpus...\n");
+ msecs = 10000;
while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) {
barrier();
mdelay(1);
#ifdef CONFIG_ALTIVEC
bne load_up_altivec /* if from user, just load it up */
#endif /* CONFIG_ALTIVEC */
+ addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
PerformanceMonitor:
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
- /* Grab our linux cpu number */
+ /* Grab our physical cpu number */
mr r24,r3
/* Tell the master cpu we're here */
cmpdi 0,r4,1
bne 100b
-#ifdef CONFIG_HMT
- SET_REG_IMMEDIATE(r4, .hmt_init)
- mtctr r4
- bctr
-#else
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init)
mtctr r4
mr r3,r24
#else
BUG_OPCODE
#endif
-#endif
/* This value is used to mark exception frames on the stack. */
.section ".toc","aw"
label##_pSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
- RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
#define STD_EXCEPTION_ISERIES(n, label, area) \
label##_iSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
- RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_ISERIES_1(area); \
EXCEPTION_PROLOG_ISERIES_2; \
b label##_common
label##_iSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
- RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \
lbz r10,PACAPROCENABLED(r13); \
cmpwi 0,r10,0; \
label##_common: \
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
DISABLE_INTS; \
+ bl .ppc64_runlatch_on; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
b .ret_from_except_lite
_machine_check_pSeries:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
. = 0x300
data_access_slb_pSeries:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13
- RUNLATCH_ON(r13)
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_DAR
instruction_access_slb_pSeries:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13
- RUNLATCH_ON(r13)
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
.globl system_call_pSeries
system_call_pSeries:
HMT_MEDIUM
- RUNLATCH_ON(r9)
mr r9,r13
mfmsr r10
mfspr r13,SPRN_SPRG3
system_reset_fwnmi:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
.globl machine_check_fwnmi
machine_check_fwnmi:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
#ifdef CONFIG_PPC_ISERIES
.align 7
.globl data_access_common
data_access_common:
- RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */
mfspr r10,SPRN_DAR
std r10,PACA_EXGEN+EX_DAR(r13)
mfspr r10,SPRN_DSISR
EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
hardware_interrupt_entry:
DISABLE_INTS
+ bl .ppc64_runlatch_on
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_IRQ
b .ret_from_except_lite
ori r6,r6,MSR_RI
mtmsrd r6 /* RI on */
-#ifdef CONFIG_HMT
- /* Start up the second thread on cpu 0 */
- mfspr r3,SPRN_PVR
- srwi r3,r3,16
- cmpwi r3,0x34 /* Pulsar */
- beq 90f
- cmpwi r3,0x36 /* Icestar */
- beq 90f
- cmpwi r3,0x37 /* SStar */
- beq 90f
- b 91f /* HMT not supported */
-90: li r3,0
- bl .hmt_start_secondary
-91:
-#endif
-
/* The following gets the stack and TOC set up with the regs */
/* pointing to the real addr of the kernel stack. This is */
/* all done to support the C function call below which sets */
bl .start_kernel
-_GLOBAL(hmt_init)
-#ifdef CONFIG_HMT
- LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
- mfspr r7,SPRN_PVR
- srwi r7,r7,16
- cmpwi r7,0x34 /* Pulsar */
- beq 90f
- cmpwi r7,0x36 /* Icestar */
- beq 91f
- cmpwi r7,0x37 /* SStar */
- beq 91f
- b 101f
-90: mfspr r6,SPRN_PIR
- andi. r6,r6,0x1f
- b 92f
-91: mfspr r6,SPRN_PIR
- andi. r6,r6,0x3ff
-92: sldi r4,r24,3
- stwx r6,r5,r4
- bl .hmt_start_secondary
- b 101f
-
-__hmt_secondary_hold:
- LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
- clrldi r5,r5,4
- li r7,0
- mfspr r6,SPRN_PIR
- mfspr r8,SPRN_PVR
- srwi r8,r8,16
- cmpwi r8,0x34
- bne 93f
- andi. r6,r6,0x1f
- b 103f
-93: andi. r6,r6,0x3f
-
-103: lwzx r8,r5,r7
- cmpw r8,r6
- beq 104f
- addi r7,r7,8
- b 103b
-
-104: addi r7,r7,4
- lwzx r9,r5,r7
- mr r24,r9
-101:
-#endif
- mr r3,r24
- b .pSeries_secondary_smp_init
-
-#ifdef CONFIG_HMT
-_GLOBAL(hmt_start_secondary)
- LOAD_REG_IMMEDIATE(r4,__hmt_secondary_hold)
- clrldi r4,r4,4
- mtspr SPRN_NIADORM, r4
- mfspr r4, SPRN_MSRDORM
- li r5, -65
- and r4, r4, r5
- mtspr SPRN_MSRDORM, r4
- lis r4,0xffef
- ori r4,r4,0x7403
- mtspr SPRN_TSC, r4
- li r4,0x1f4
- mtspr SPRN_TST, r4
- mfspr r4, SPRN_HID0
- ori r4, r4, 0x1
- mtspr SPRN_HID0, r4
- mfspr r4, SPRN_CTRLF
- oris r4, r4, 0x40
- mtspr SPRN_CTRLT, r4
- blr
-#endif
+ /* Not reached */
+ BUG_OPCODE
/*
* We put a few things here that have to be page-aligned.
const char *system_id = "";
unsigned int *lp_index_ptr, lp_index = 0;
struct device_node *rtas_node;
- int *lrdrp;
+ int *lrdrp = NULL;
rootdn = find_path_device("/");
if (rootdn) {
seq_printf(m, "partition_id=%d\n", (int)lp_index);
rtas_node = find_path_device("/rtas");
- lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL);
+ if (rtas_node)
+ lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity",
+ NULL);
if (lrdrp == NULL) {
partition_potential_processors = vdso_data->processorCount;
#include <asm/prom.h>
#include <asm/smp.h>
-#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */
-
int default_machine_kexec_prepare(struct kimage *image)
{
int i;
*/
if (htab_address) {
low = __pa(htab_address);
- high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE;
+ high = low + htab_size_bytes;
for (i = 0; i < image->nr_segments; i++) {
begin = image->segment[i].mem;
}
/* Values we need to export to the second kernel via the device tree. */
-static unsigned long htab_base, htab_size, kernel_end;
+static unsigned long htab_base, kernel_end;
static struct property htab_base_prop = {
.name = "linux,htab-base",
static struct property htab_size_prop = {
.name = "linux,htab-size",
.length = sizeof(unsigned long),
- .value = (unsigned char *)&htab_size,
+ .value = (unsigned char *)&htab_size_bytes,
};
static struct property kernel_end_prop = {
htab_base = __pa(htab_address);
prom_add_property(node, &htab_base_prop);
-
- htab_size = 1UL << ppc64_pft_size;
prom_add_property(node, &htab_size_prop);
out:
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strpbrk);
-EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(strcasecmp);
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(cuda_request);
EXPORT_SYMBOL(cuda_poll);
#endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_PPC_PMAC
-EXPORT_SYMBOL(sys_ctrler);
-#endif
#ifdef CONFIG_VT
EXPORT_SYMBOL(kd_mksound);
#endif
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memchr);
#endif
#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(__delay);
EXPORT_SYMBOL(timer_interrupt);
EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(tb_ticks_per_jiffy);
EXPORT_SYMBOL(cacheable_memcpy);
#endif
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-
#ifdef CONFIG_8xx
EXPORT_SYMBOL(cpm_install_handler);
EXPORT_SYMBOL(cpm_free_handler);
show_stack(current, NULL);
}
EXPORT_SYMBOL(dump_stack);
+
+#ifdef CONFIG_PPC64
+void ppc64_runlatch_on(void)
+{
+ unsigned long ctrl;
+
+ if (cpu_has_feature(CPU_FTR_CTRL) && !test_thread_flag(TIF_RUNLATCH)) {
+ HMT_medium();
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl |= CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+
+ set_thread_flag(TIF_RUNLATCH);
+ }
+}
+
+void ppc64_runlatch_off(void)
+{
+ unsigned long ctrl;
+
+ if (cpu_has_feature(CPU_FTR_CTRL) && test_thread_flag(TIF_RUNLATCH)) {
+ HMT_medium();
+
+ clear_thread_flag(TIF_RUNLATCH);
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl &= ~CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+ }
+}
+#endif
{
unsigned long start, mem, size;
struct device_node **allnextp = &allnodes;
- char *p = NULL;
- int l = 0;
DBG(" -> unflatten_device_tree()\n");
if (of_chosen == NULL)
of_chosen = of_find_node_by_path("/chosen@0");
- /* Retreive command line */
- if (of_chosen != NULL) {
- p = (char *)get_property(of_chosen, "bootargs", &l);
- if (p != NULL && l > 0)
- strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE));
- }
-#ifdef CONFIG_CMDLINE
- if (l == 0 || (l == 1 && (*p) == 0))
- strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif /* CONFIG_CMDLINE */
-
- DBG("Command line is: %s\n", cmd_line);
-
DBG(" <- unflatten_device_tree()\n");
}
{
u32 *prop;
unsigned long *lprop;
+ unsigned long l;
+ char *p;
DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
crashk_res.end = crashk_res.start + *lprop - 1;
#endif
+ /* Retreive command line */
+ p = of_get_flat_dt_prop(node, "bootargs", &l);
+ if (p != NULL && l > 0)
+ strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+
+#ifdef CONFIG_CMDLINE
+ if (l == 0 || (l == 1 && (*p) == 0))
+ strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif /* CONFIG_CMDLINE */
+
+ DBG("Command line is: %s\n", cmd_line);
+
+ if (strstr(cmd_line, "mem=")) {
+ char *p, *q;
+ unsigned long maxmem = 0;
+
+ for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
+ q = p + 4;
+ if (p > cmd_line && p[-1] != ' ')
+ continue;
+ maxmem = simple_strtoul(q, &q, 0);
+ if (*q == 'k' || *q == 'K') {
+ maxmem <<= 10;
+ ++q;
+ } else if (*q == 'm' || *q == 'M') {
+ maxmem <<= 20;
+ ++q;
+ } else if (*q == 'g' || *q == 'G') {
+ maxmem <<= 30;
+ ++q;
+ }
+ }
+ memory_limit = maxmem;
+ }
+
/* break now */
return 1;
}
size_32 = *(reserve_map_32++);
if (size_32 == 0)
break;
- DBG("reserving: %lx -> %lx\n", base_32, size_32);
+ DBG("reserving: %x -> %x\n", base_32, size_32);
lmb_reserve(base_32, size_32);
}
return;
#define MAX_CPU_THREADS 2
-/* TO GO */
-#ifdef CONFIG_HMT
-struct {
- unsigned int pir;
- unsigned int threadid;
-} hmt_thread_data[NR_CPUS];
-#endif /* CONFIG_HMT */
-
/*
* Error results ... some OF calls will return "-1" on error, some
* will return 0, some will return either. To simplify, here are
*/
*spinloop = 0;
-#ifdef CONFIG_HMT
- for (i = 0; i < NR_CPUS; i++)
- RELOC(hmt_thread_data)[i].pir = 0xdeadbeef;
-#endif
/* look for cpus */
for (node = 0; prom_next_node(&node); ) {
type[0] = 0;
/* Reserve cpu #s for secondary threads. They start later. */
cpuid += cpu_threads;
}
-#ifdef CONFIG_HMT
- /* Only enable HMT on processors that provide support. */
- if (__is_processor(PV_PULSAR) ||
- __is_processor(PV_ICESTAR) ||
- __is_processor(PV_SSTAR)) {
- prom_printf(" starting secondary threads\n");
-
- for (i = 0; i < NR_CPUS; i += 2) {
- if (!cpu_online(i))
- continue;
-
- if (i == 0) {
- unsigned long pir = mfspr(SPRN_PIR);
- if (__is_processor(PV_PULSAR)) {
- RELOC(hmt_thread_data)[i].pir =
- pir & 0x1f;
- } else {
- RELOC(hmt_thread_data)[i].pir =
- pir & 0x3ff;
- }
- }
- }
- } else {
- prom_printf("Processor is not HMT capable\n");
- }
-#endif
if (cpuid > NR_CPUS)
prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
DBG(" <- smp_release_cpus()\n");
}
-#else
-#define smp_release_cpus()
#endif /* CONFIG_SMP || CONFIG_KEXEC */
/*
check_smt_enabled();
smp_setup_cpu_maps();
+#ifdef CONFIG_SMP
/* Release secondary cpus out of their spinloops at 0x60 now that
* we can map physical -> logical CPU ids
*/
smp_release_cpus();
+#endif
printk("Starting Linux PPC64 %s\n", system_utsname.version);
};
extern int do_adjtimex(struct timex *);
-extern void ppc_adjtimex(void);
asmlinkage long compat_sys_adjtimex(struct timex32 __user *utp)
{
ret = do_adjtimex(&txc);
- /* adjust the conversion of TB to time of day to track adjtimex */
- ppc_adjtimex();
-
if(put_user(txc.modes, &utp->modes) ||
__put_user(txc.offset, &utp->offset) ||
__put_user(txc.freq, &utp->freq) ||
#include <linux/security.h>
#include <linux/percpu.h>
#include <linux/rtc.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
#include <asm/processor.h>
unsigned long tb_ticks_per_sec;
u64 tb_to_xs;
unsigned tb_to_us;
-unsigned long processor_freq;
+
+#define TICKLEN_SCALE (SHIFT_SCALE - 10)
+u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */
+u64 ticklen_to_xs; /* 0.64 fraction */
+
+/* If last_tick_len corresponds to about 1/HZ seconds, then
+ last_tick_len << TICKLEN_SHIFT will be about 2^63. */
+#define TICKLEN_SHIFT (63 - 30 - TICKLEN_SCALE + SHIFT_HZ)
+
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL_GPL(rtc_lock);
extern struct timezone sys_tz;
static long timezone_offset;
-void ppc_adjtimex(void);
-
-static unsigned adjusting_time = 0;
-
unsigned long ppc_proc_freq;
unsigned long ppc_tb_freq;
*/
if (ppc_md.set_rtc_time && ntp_synced() &&
xtime.tv_sec - last_rtc_update >= 659 &&
- abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ &&
- jiffies - wall_jiffies == 1) {
+ abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ) {
struct rtc_time tm;
to_tm(xtime.tv_sec + 1 + timezone_offset, &tm);
tm.tm_year -= 1900;
if (__USE_RTC()) {
/* do this the old way */
unsigned long flags, seq;
- unsigned int sec, nsec, usec, lost;
+ unsigned int sec, nsec, usec;
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
sec = xtime.tv_sec;
nsec = xtime.tv_nsec + tb_ticks_since(tb_last_stamp);
- lost = jiffies - wall_jiffies;
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
- usec = nsec / 1000 + lost * (1000000 / HZ);
+ usec = nsec / 1000;
while (usec >= 1000000) {
usec -= 1000000;
++sec;
EXPORT_SYMBOL(do_gettimeofday);
-/* Synchronize xtime with do_gettimeofday */
-
-static inline void timer_sync_xtime(unsigned long cur_tb)
-{
-#ifdef CONFIG_PPC64
- /* why do we do this? */
- struct timeval my_tv;
-
- __do_gettimeofday(&my_tv, cur_tb);
-
- if (xtime.tv_sec <= my_tv.tv_sec) {
- xtime.tv_sec = my_tv.tv_sec;
- xtime.tv_nsec = my_tv.tv_usec * 1000;
- }
-#endif
-}
-
/*
* There are two copies of tb_to_xs and stamp_xsec so that no
* lock is needed to access and use these values in
{
unsigned long offset;
u64 new_stamp_xsec;
+ u64 tlen, t2x;
if (__USE_RTC())
return;
+ tlen = current_tick_length();
offset = cur_tb - do_gtod.varp->tb_orig_stamp;
- if ((offset & 0x80000000u) == 0)
- return;
- new_stamp_xsec = do_gtod.varp->stamp_xsec
- + mulhdu(offset, do_gtod.varp->tb_to_xs);
- update_gtod(cur_tb, new_stamp_xsec, do_gtod.varp->tb_to_xs);
+ if (tlen == last_tick_len && offset < 0x80000000u) {
+ /* check that we're still in sync; if not, resync */
+ struct timeval tv;
+ __do_gettimeofday(&tv, cur_tb);
+ if (tv.tv_sec <= xtime.tv_sec &&
+ (tv.tv_sec < xtime.tv_sec ||
+ tv.tv_usec * 1000 <= xtime.tv_nsec))
+ return;
+ }
+ if (tlen != last_tick_len) {
+ t2x = mulhdu(tlen << TICKLEN_SHIFT, ticklen_to_xs);
+ last_tick_len = tlen;
+ } else
+ t2x = do_gtod.varp->tb_to_xs;
+ new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
+ do_div(new_stamp_xsec, 1000000000);
+ new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
+ update_gtod(cur_tb, new_stamp_xsec, t2x);
}
#ifdef CONFIG_SMP
write_seqlock(&xtime_lock);
tb_last_jiffy += tb_ticks_per_jiffy;
tb_last_stamp = per_cpu(last_jiffy, cpu);
- timer_recalc_offset(tb_last_jiffy);
do_timer(regs);
- timer_sync_xtime(tb_last_jiffy);
+ timer_recalc_offset(tb_last_jiffy);
timer_check_rtc();
write_sequnlock(&xtime_lock);
- if (adjusting_time && (time_adjust == 0))
- ppc_adjtimex();
}
next_dec = tb_ticks_per_jiffy - ticks;
void wakeup_decrementer(void)
{
- int i;
+ unsigned long ticks;
- set_dec(tb_ticks_per_jiffy);
/*
- * We don't expect this to be called on a machine with a 601,
- * so using get_tbl is fine.
+ * The timebase gets saved on sleep and restored on wakeup,
+ * so all we need to do is to reset the decrementer.
*/
- tb_last_stamp = tb_last_jiffy = get_tb();
- for_each_cpu(i)
- per_cpu(last_jiffy, i) = tb_last_stamp;
+ ticks = tb_ticks_since(__get_cpu_var(last_jiffy));
+ if (ticks < tb_ticks_per_jiffy)
+ ticks = tb_ticks_per_jiffy - ticks;
+ else
+ ticks = 1;
+ set_dec(ticks);
}
#ifdef CONFIG_SMP
time_t wtm_sec, new_sec = tv->tv_sec;
long wtm_nsec, new_nsec = tv->tv_nsec;
unsigned long flags;
- long int tb_delta;
- u64 new_xsec, tb_delta_xs;
+ u64 new_xsec;
+ unsigned long tb_delta;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
first_settimeofday = 0;
}
#endif
+
+ /*
+ * Subtract off the number of nanoseconds since the
+ * beginning of the last tick.
+ * Note that since we don't increment jiffies_64 anywhere other
+ * than in do_timer (since we don't have a lost tick problem),
+ * wall_jiffies will always be the same as jiffies,
+ * and therefore the (jiffies - wall_jiffies) computation
+ * has been removed.
+ */
tb_delta = tb_ticks_since(tb_last_stamp);
- tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy;
- tb_delta_xs = mulhdu(tb_delta, do_gtod.varp->tb_to_xs);
+ tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */
+ new_nsec -= SCALE_XSEC(tb_delta, 1000000000);
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
ntp_clear();
- new_xsec = 0;
- if (new_nsec != 0) {
- new_xsec = (u64)new_nsec * XSEC_PER_SEC;
+ new_xsec = xtime.tv_nsec;
+ if (new_xsec != 0) {
+ new_xsec *= XSEC_PER_SEC;
do_div(new_xsec, NSEC_PER_SEC);
}
- new_xsec += (u64)new_sec * XSEC_PER_SEC - tb_delta_xs;
+ new_xsec += (u64)xtime.tv_sec * XSEC_PER_SEC;
update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs);
vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
unsigned long flags;
unsigned long tm = 0;
struct div_result res;
- u64 scale;
+ u64 scale, x;
unsigned shift;
if (ppc_md.time_init != NULL)
}
tb_ticks_per_jiffy = ppc_tb_freq / HZ;
- tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
+ tb_ticks_per_sec = ppc_tb_freq;
tb_ticks_per_usec = ppc_tb_freq / 1000000;
tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
- div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res);
- tb_to_xs = res.result_low;
+
+ /*
+ * Calculate the length of each tick in ns. It will not be
+ * exactly 1e9/HZ unless ppc_tb_freq is divisible by HZ.
+ * We compute 1e9 * tb_ticks_per_jiffy / ppc_tb_freq,
+ * rounded up.
+ */
+ x = (u64) NSEC_PER_SEC * tb_ticks_per_jiffy + ppc_tb_freq - 1;
+ do_div(x, ppc_tb_freq);
+ tick_nsec = x;
+ last_tick_len = x << TICKLEN_SCALE;
+
+ /*
+ * Compute ticklen_to_xs, which is a factor which gets multiplied
+ * by (last_tick_len << TICKLEN_SHIFT) to get a tb_to_xs value.
+ * It is computed as:
+ * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9)
+ * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT
+ * so as to give the result as a 0.64 fixed-point fraction.
+ */
+ div128_by_32(1ULL << (64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT), 0,
+ tb_ticks_per_jiffy, &res);
+ div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res);
+ ticklen_to_xs = res.result_low;
+
+ /* Compute tb_to_xs from tick_nsec */
+ tb_to_xs = mulhdu(last_tick_len << TICKLEN_SHIFT, ticklen_to_xs);
/*
* Compute scale factor for sched_clock.
tm = get_boot_time();
write_seqlock_irqsave(&xtime_lock, flags);
+
+ /* If platform provided a timezone (pmac), we correct the time */
+ if (timezone_offset) {
+ sys_tz.tz_minuteswest = -timezone_offset / 60;
+ sys_tz.tz_dsttime = 0;
+ tm -= timezone_offset;
+ }
+
xtime.tv_sec = tm;
xtime.tv_nsec = 0;
do_gtod.varp = &do_gtod.vars[0];
vdso_data->tb_orig_stamp = tb_last_jiffy;
vdso_data->tb_update_count = 0;
vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
- vdso_data->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
+ vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
vdso_data->tb_to_xs = tb_to_xs;
time_freq = 0;
- /* If platform provided a timezone (pmac), we correct the time */
- if (timezone_offset) {
- sys_tz.tz_minuteswest = -timezone_offset / 60;
- sys_tz.tz_dsttime = 0;
- xtime.tv_sec -= timezone_offset;
- }
-
last_rtc_update = xtime.tv_sec;
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
set_dec(tb_ticks_per_jiffy);
}
-/*
- * After adjtimex is called, adjust the conversion of tb ticks
- * to microseconds to keep do_gettimeofday synchronized
- * with ntpd.
- *
- * Use the time_adjust, time_freq and time_offset computed by adjtimex to
- * adjust the frequency.
- */
-
-/* #define DEBUG_PPC_ADJTIMEX 1 */
-
-void ppc_adjtimex(void)
-{
-#ifdef CONFIG_PPC64
- unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec,
- new_tb_to_xs, new_xsec, new_stamp_xsec;
- unsigned long tb_ticks_per_sec_delta;
- long delta_freq, ltemp;
- struct div_result divres;
- unsigned long flags;
- long singleshot_ppm = 0;
-
- /*
- * Compute parts per million frequency adjustment to
- * accomplish the time adjustment implied by time_offset to be
- * applied over the elapsed time indicated by time_constant.
- * Use SHIFT_USEC to get it into the same units as
- * time_freq.
- */
- if ( time_offset < 0 ) {
- ltemp = -time_offset;
- ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
- ltemp >>= SHIFT_KG + time_constant;
- ltemp = -ltemp;
- } else {
- ltemp = time_offset;
- ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
- ltemp >>= SHIFT_KG + time_constant;
- }
-
- /* If there is a single shot time adjustment in progress */
- if ( time_adjust ) {
-#ifdef DEBUG_PPC_ADJTIMEX
- printk("ppc_adjtimex: ");
- if ( adjusting_time == 0 )
- printk("starting ");
- printk("single shot time_adjust = %ld\n", time_adjust);
-#endif
-
- adjusting_time = 1;
-
- /*
- * Compute parts per million frequency adjustment
- * to match time_adjust
- */
- singleshot_ppm = tickadj * HZ;
- /*
- * The adjustment should be tickadj*HZ to match the code in
- * linux/kernel/timer.c, but experiments show that this is too
- * large. 3/4 of tickadj*HZ seems about right
- */
- singleshot_ppm -= singleshot_ppm / 4;
- /* Use SHIFT_USEC to get it into the same units as time_freq */
- singleshot_ppm <<= SHIFT_USEC;
- if ( time_adjust < 0 )
- singleshot_ppm = -singleshot_ppm;
- }
- else {
-#ifdef DEBUG_PPC_ADJTIMEX
- if ( adjusting_time )
- printk("ppc_adjtimex: ending single shot time_adjust\n");
-#endif
- adjusting_time = 0;
- }
-
- /* Add up all of the frequency adjustments */
- delta_freq = time_freq + ltemp + singleshot_ppm;
-
- /*
- * Compute a new value for tb_ticks_per_sec based on
- * the frequency adjustment
- */
- den = 1000000 * (1 << (SHIFT_USEC - 8));
- if ( delta_freq < 0 ) {
- tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den;
- new_tb_ticks_per_sec = tb_ticks_per_sec + tb_ticks_per_sec_delta;
- }
- else {
- tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( delta_freq >> (SHIFT_USEC - 8))) / den;
- new_tb_ticks_per_sec = tb_ticks_per_sec - tb_ticks_per_sec_delta;
- }
-
-#ifdef DEBUG_PPC_ADJTIMEX
- printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm);
- printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec);
-#endif
-
- /*
- * Compute a new value of tb_to_xs (used to convert tb to
- * microseconds) and a new value of stamp_xsec which is the
- * time (in 1/2^20 second units) corresponding to
- * tb_orig_stamp. This new value of stamp_xsec compensates
- * for the change in frequency (implied by the new tb_to_xs)
- * which guarantees that the current time remains the same.
- */
- write_seqlock_irqsave( &xtime_lock, flags );
- tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp;
- div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres);
- new_tb_to_xs = divres.result_low;
- new_xsec = mulhdu(tb_ticks, new_tb_to_xs);
-
- old_xsec = mulhdu(tb_ticks, do_gtod.varp->tb_to_xs);
- new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec;
-
- update_gtod(do_gtod.varp->tb_orig_stamp, new_stamp_xsec, new_tb_to_xs);
-
- write_sequnlock_irqrestore( &xtime_lock, flags );
-#endif /* CONFIG_PPC64 */
-}
-
#define FEBRUARY 2
#define STARTOFTIME 1970
*/
hpte_v = hptep->v;
+ /*
+ * Call __tlbie() here rather than tlbie() since we
+ * already hold the native_tlbie_lock.
+ */
if (hpte_v & HPTE_V_VALID) {
hptep->v = 0;
- tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K, 0);
+ __tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K);
}
}
+ asm volatile("eieio; tlbsync; ptesync":::"memory");
spin_unlock(&native_tlbie_lock);
local_irq_restore(flags);
}
struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
hpte_t *htab_address;
+unsigned long htab_size_bytes;
unsigned long htab_hash_mask;
int mmu_linear_psize = MMU_PAGE_4K;
int mmu_virtual_psize = MMU_PAGE_4K;
void __init htab_initialize(void)
{
- unsigned long table, htab_size_bytes;
+ unsigned long table;
unsigned long pteg_count;
unsigned long mode_rw;
unsigned long base = 0, size = 0;
config PROFILING
+ depends on !PPC_ISERIES
bool "Profiling support (EXPERIMENTAL)"
help
Say Y here to enable the extended profiling support mechanisms used
{
void *eventStack;
+ spin_lock_init(&hvlpevent_queue.lock);
+
/* Allocate a page for the Event Stack. */
eventStack = alloc_bootmem_pages(LpEventStackSize);
memset(eventStack, 0, LpEventStackSize);
* here and let the timer_interrupt code sort out the actual time.
*/
get_lppaca()->int_dword.fields.decr_int = 1;
+ ppc64_runlatch_on();
process_iSeries_events();
}
PCI_DN(np)->busno = 0xf0;
}
- /* Tell pci.c to use the common resource allocation mecanism */
- pci_probe_only = 0;
+ /* Tell pci.c to not change any resource allocations. */
+ pci_probe_only = 1;
/* Allow all IO */
io_page_mask = -1;
KL0_SCC_CELL_ENABLE);
MACIO_BIC(KEYLARGO_FCR1,
- /*KL1_USB2_CELL_ENABLE |*/
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
- KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE);
+ KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+ KL1_EIDE0_ENABLE);
if (pmac_mb.board_flags & PMAC_MB_MOBILE)
MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
},
{ "PowerMac10,1", "Mac mini",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
- PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER,
+ PMAC_MB_MAY_SLEEP,
},
{ "iMac,1", "iMac (first generation)",
PMAC_TYPE_ORIG_IMAC, paddington_features,
},
{ "PowerBook5,8", "PowerBook G4 15\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
- PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
},
{ "PowerBook5,9", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
- PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
},
{ "PowerBook6,1", "PowerBook G4 12\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
processors, that is, which share physical processors between
two or more partitions.
-config HMT
- bool "Hardware multithreading"
- depends on SMP && PPC_PSERIES && BROKEN
- help
- This option enables hardware multithreading on RS64 cpus.
- pSeries systems p620 and p660 have such a cpu type.
-
config EEH
bool "PCI Extended Error Handling (EEH)" if EMBEDDED
depends on PPC_PSERIES
if (start_cpu == RTAS_UNKNOWN_SERVICE)
return 1;
- status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu);
+ status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, pcpu);
if (status != 0) {
printk(KERN_ERR "start-cpu failed: %i\n", status);
return 0;
spin_lock_irqsave(&mpic->fixup_lock, flags);
writeb(0x10 + 2 * fixup->index, fixup->base + 2);
tmp = readl(fixup->base + 4);
- tmp &= ~1U;
+ tmp |= 1;
writel(tmp, fixup->base + 4);
spin_unlock_irqrestore(&mpic->fixup_lock, flags);
}
#ifdef CONFIG_MPIC_BROKEN_U3
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = irq - mpic->irq_offset;
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+ mpic_enable_irq(irq);
+#ifdef CONFIG_MPIC_BROKEN_U3
if (mpic_is_ht_interrupt(mpic, src))
mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
-
#endif /* CONFIG_MPIC_BROKEN_U3 */
- mpic_enable_irq(irq);
-
return 0;
}
#ifdef CONFIG_ALTIVEC
bne load_up_altivec /* if from user, just load it up */
#endif /* CONFIG_ALTIVEC */
+ addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
#ifdef CONFIG_PPC64BRIDGE
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strpbrk);
-EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(strcasecmp);
EXPORT_SYMBOL(__div64_32);
EXPORT_SYMBOL(cacheable_memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memchr);
+++ /dev/null
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include "nonstdio.h"
-#include "privinst.h"
-
-#define scanhex xmon_scanhex
-#define skipbl xmon_skipbl
-
-#define ADB_B (*(volatile unsigned char *)0xf3016000)
-#define ADB_SR (*(volatile unsigned char *)0xf3017400)
-#define ADB_ACR (*(volatile unsigned char *)0xf3017600)
-#define ADB_IFR (*(volatile unsigned char *)0xf3017a00)
-
-static inline void eieio(void) { asm volatile ("eieio" : :); }
-
-#define N_ADB_LOG 1000
-struct adb_log {
- unsigned char b;
- unsigned char ifr;
- unsigned char acr;
- unsigned int time;
-} adb_log[N_ADB_LOG];
-int n_adb_log;
-
-void
-init_adb_log(void)
-{
- adb_log[0].b = ADB_B;
- adb_log[0].ifr = ADB_IFR;
- adb_log[0].acr = ADB_ACR;
- adb_log[0].time = get_dec();
- n_adb_log = 0;
-}
-
-void
-dump_adb_log(void)
-{
- unsigned t, t0;
- struct adb_log *ap;
- int i;
-
- ap = adb_log;
- t0 = ap->time;
- for (i = 0; i <= n_adb_log; ++i, ++ap) {
- t = t0 - ap->time;
- printf("b=%x ifr=%x acr=%x at %d.%.7d\n", ap->b, ap->ifr, ap->acr,
- t / 1000000000, (t % 1000000000) / 100);
- }
-}
-
-void
-adb_chklog(void)
-{
- struct adb_log *ap = &adb_log[n_adb_log + 1];
-
- ap->b = ADB_B;
- ap->ifr = ADB_IFR;
- ap->acr = ADB_ACR;
- if (ap->b != ap[-1].b || (ap->ifr & 4) != (ap[-1].ifr & 4)
- || ap->acr != ap[-1].acr) {
- ap->time = get_dec();
- ++n_adb_log;
- }
-}
-
-int
-adb_bitwait(int bmask, int bval, int fmask, int fval)
-{
- int i;
- struct adb_log *ap;
-
- for (i = 10000; i > 0; --i) {
- adb_chklog();
- ap = &adb_log[n_adb_log];
- if ((ap->b & bmask) == bval && (ap->ifr & fmask) == fval)
- return 0;
- }
- return -1;
-}
-
-int
-adb_wait(void)
-{
- if (adb_bitwait(0, 0, 4, 4) < 0) {
- printf("adb: ready wait timeout\n");
- return -1;
- }
- return 0;
-}
-
-void
-adb_readin(void)
-{
- int i, j;
- unsigned char d[64];
-
- if (ADB_B & 8) {
- printf("ADB_B: %x\n", ADB_B);
- return;
- }
- i = 0;
- adb_wait();
- j = ADB_SR;
- eieio();
- ADB_B &= ~0x20;
- eieio();
- for (;;) {
- if (adb_wait() < 0)
- break;
- d[i++] = ADB_SR;
- eieio();
- if (ADB_B & 8)
- break;
- ADB_B ^= 0x10;
- eieio();
- }
- ADB_B |= 0x30;
- if (adb_wait() == 0)
- j = ADB_SR;
- for (j = 0; j < i; ++j)
- printf("%.2x ", d[j]);
- printf("\n");
-}
-
-int
-adb_write(unsigned char *d, int i)
-{
- int j;
- unsigned x;
-
- if ((ADB_B & 8) == 0) {
- printf("r: ");
- adb_readin();
- }
- for (;;) {
- ADB_ACR = 0x1c;
- eieio();
- ADB_SR = d[0];
- eieio();
- ADB_B &= ~0x20;
- eieio();
- if (ADB_B & 8)
- break;
- ADB_ACR = 0xc;
- eieio();
- ADB_B |= 0x20;
- eieio();
- adb_readin();
- }
- adb_wait();
- for (j = 1; j < i; ++j) {
- ADB_SR = d[j];
- eieio();
- ADB_B ^= 0x10;
- eieio();
- if (adb_wait() < 0)
- break;
- }
- ADB_ACR = 0xc;
- eieio();
- x = ADB_SR;
- eieio();
- ADB_B |= 0x30;
- return j;
-}
-
-void
-adbcmds(void)
-{
- char cmd;
- unsigned rtcu, rtcl, dec, pdec, x;
- int i, j;
- unsigned char d[64];
-
- cmd = skipbl();
- switch (cmd) {
- case 't':
- for (;;) {
- rtcl = get_rtcl();
- rtcu = get_rtcu();
- dec = get_dec();
- printf("rtc u=%u l=%u dec=%x (%d = %d.%.7d)\n",
- rtcu, rtcl, dec, pdec - dec, (pdec - dec) / 1000000000,
- ((pdec - dec) % 1000000000) / 100);
- pdec = dec;
- if (cmd == 'x')
- break;
- while (xmon_read(stdin, &cmd, 1) != 1)
- ;
- }
- break;
- case 'r':
- init_adb_log();
- while (adb_bitwait(8, 0, 0, 0) == 0)
- adb_readin();
- break;
- case 'w':
- i = 0;
- while (scanhex(&x))
- d[i++] = x;
- init_adb_log();
- j = adb_write(d, i);
- printf("sent %d bytes\n", j);
- while (adb_bitwait(8, 0, 0, 0) == 0)
- adb_readin();
- break;
- case 'l':
- dump_adb_log();
- break;
- }
-}
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/page.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/cuda.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/sysrq.h>
#include <linux/bitops.h>
#include <asm/xmon.h>
-#include <asm/prom.h>
-#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/errno.h>
#include <asm/processor.h>
unsigned int TXRDY, RXRDY, DLAB;
static int xmon_expect(const char *str, unsigned int timeout);
-static int use_screen;
static int via_modem;
-static int xmon_use_sccb;
#define TB_SPEED 25000000
sccd[3] &= ~DLAB; /* reset DLAB */
}
-extern int adb_init(void);
-
-#ifdef CONFIG_PPC_CHRP
-/*
- * This looks in the "ranges" property for the primary PCI host bridge
- * to find the physical address of the start of PCI/ISA I/O space.
- * It is basically a cut-down version of pci_process_bridge_OF_ranges.
- */
-static unsigned long chrp_find_phys_io_base(void)
-{
- struct device_node *node;
- unsigned int *ranges;
- unsigned long base = CHRP_ISA_IO_BASE;
- int rlen = 0;
- int np;
-
- node = find_devices("isa");
- if (node != NULL) {
- node = node->parent;
- if (node == NULL || node->type == NULL
- || strcmp(node->type, "pci") != 0)
- node = NULL;
- }
- if (node == NULL)
- node = find_devices("pci");
- if (node == NULL)
- return base;
-
- ranges = (unsigned int *) get_property(node, "ranges", &rlen);
- np = prom_n_addr_cells(node) + 5;
- while ((rlen -= np * sizeof(unsigned int)) >= 0) {
- if ((ranges[0] >> 24) == 1 && ranges[2] == 0) {
- /* I/O space starting at 0, grab the phys base */
- base = ranges[np - 3];
- break;
- }
- ranges += np;
- }
- return base;
-}
-#endif /* CONFIG_PPC_CHRP */
#ifdef CONFIG_MAGIC_SYSRQ
static void sysrq_handle_xmon(int key, struct pt_regs *regs,
#ifdef CONFIG_PPC_MULTIPLATFORM
volatile unsigned char *base;
-#ifdef CONFIG_PPC_CHRP
- base = (volatile unsigned char *) isa_io_base;
- if (_machine == _MACH_chrp)
- base = (volatile unsigned char *)
- ioremap(chrp_find_phys_io_base(), 0x1000);
-
- sccc = base + 0x3fd;
- sccd = base + 0x3f8;
- if (xmon_use_sccb) {
- sccc -= 0x100;
- sccd -= 0x100;
- }
- TXRDY = 0x20;
- RXRDY = 1;
- DLAB = 0x80;
-#endif /* CONFIG_PPC_CHRP */
#elif defined(CONFIG_GEMINI)
/* should already be mapped by the kernel boot */
sccc = (volatile unsigned char *) 0xffeffb0d;
register_sysrq_key('x', &sysrq_xmon_op);
}
-static int scc_initialized = 0;
+static int scc_initialized;
void xmon_init_scc(void);
-extern void cuda_poll(void);
-
-static inline void do_poll_adb(void)
-{
-#ifdef CONFIG_ADB_PMU
- if (sys_ctrler == SYS_CTRLER_PMU)
- pmu_poll_adb();
-#endif /* CONFIG_ADB_PMU */
-#ifdef CONFIG_ADB_CUDA
- if (sys_ctrler == SYS_CTRLER_CUDA)
- cuda_poll();
-#endif /* CONFIG_ADB_CUDA */
-}
int
xmon_write(void *handle, void *ptr, int nb)
break;
#endif
-#ifdef CONFIG_BOOTX_TEXT
- if (use_screen) {
- /* write it on the screen */
- for (i = 0; i < nb; ++i)
- btext_drawchar(*p++);
- goto out;
- }
-#endif
if (!scc_initialized)
xmon_init_scc();
ct = 0;
for (i = 0; i < nb; ++i) {
while ((*sccc & TXRDY) == 0)
- do_poll_adb();
+ ;
c = p[i];
if (c == '\n' && !ct) {
c = '\r';
eieio();
}
- out:
#ifdef CONFIG_SMP
if (!locked)
clear_bit(0, &xmon_write_lock);
}
int xmon_wants_key;
-int xmon_adb_keycode;
-
-#ifdef CONFIG_BOOTX_TEXT
-static int xmon_adb_shiftstate;
-
-static unsigned char xmon_keytab[128] =
- "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */
- "yt123465=97-80]o" /* 0x10 - 0x1f */
- "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */
- "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
- "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
- "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
-
-static unsigned char xmon_shift_keytab[128] =
- "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */
- "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */
- "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */
- "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
- "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
- "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
-
-static int
-xmon_get_adb_key(void)
-{
- int k, t, on;
- xmon_wants_key = 1;
- for (;;) {
- xmon_adb_keycode = -1;
- t = 0;
- on = 0;
- do {
- if (--t < 0) {
- on = 1 - on;
- btext_drawchar(on? 0xdb: 0x20);
- btext_drawchar('\b');
- t = 200000;
- }
- do_poll_adb();
- } while (xmon_adb_keycode == -1);
- k = xmon_adb_keycode;
- if (on)
- btext_drawstring(" \b");
-
- /* test for shift keys */
- if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
- xmon_adb_shiftstate = (k & 0x80) == 0;
- continue;
- }
- if (k >= 0x80)
- continue; /* ignore up transitions */
- k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
- if (k != 0)
- break;
- }
- xmon_wants_key = 0;
- return k;
-}
-#endif /* CONFIG_BOOTX_TEXT */
int
xmon_read(void *handle, void *ptr, int nb)
char *p = ptr;
int i;
-#ifdef CONFIG_BOOTX_TEXT
- if (use_screen) {
- for (i = 0; i < nb; ++i)
- *p++ = xmon_get_adb_key();
- return i;
- }
-#endif
if (!scc_initialized)
xmon_init_scc();
for (i = 0; i < nb; ++i) {
while ((*sccc & RXRDY) == 0)
- do_poll_adb();
+ ;
buf_access();
*p++ = *sccd;
}
xmon_read_poll(void)
{
if ((*sccc & RXRDY) == 0) {
- do_poll_adb();
+ ;
return -1;
}
buf_access();
void
xmon_init_scc(void)
{
- if ( _machine == _MACH_chrp )
- {
- sccd[3] = 0x83; eieio(); /* LCR = 8N1 + DLAB */
- sccd[0] = 12; eieio(); /* DLL = 9600 baud */
- sccd[1] = 0; eieio();
- sccd[2] = 0; eieio(); /* FCR = 0 */
- sccd[3] = 3; eieio(); /* LCR = 8N1 */
- sccd[1] = 0; eieio(); /* IER = 0 */
- }
scc_initialized = 1;
if (via_modem) {
for (;;) {
}
}
-#if 0
-extern int (*prom_entry)(void *);
-
-int
-xmon_exit(void)
-{
- struct prom_args {
- char *service;
- } args;
-
- for (;;) {
- args.service = "exit";
- (*prom_entry)(&args);
- }
-}
-#endif
void *xmon_stdin;
void *xmon_stdout;
#include <linux/kallsyms.h>
#include <asm/ptrace.h>
#include <asm/string.h>
-#include <asm/prom.h>
-#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/xmon.h>
#include "nonstdio.h"
static void cpu_cmd(void);
#endif /* CONFIG_SMP */
static void csum(void);
-#ifdef CONFIG_BOOTX_TEXT
-static void vidcmds(void);
-#endif
static void bootcmds(void);
static void proccall(void);
static void printtime(void);
cpu_cmd();
break;
#endif /* CONFIG_SMP */
-#ifdef CONFIG_BOOTX_TEXT
- case 'v':
- vidcmds();
- break;
-#endif
case 'z':
bootcmds();
break;
}
#endif /* CONFIG_SMP */
-#ifdef CONFIG_BOOTX_TEXT
-extern boot_infos_t disp_bi;
-
-static void vidcmds(void)
-{
- int c = inchar();
- unsigned int val, w;
- extern int boot_text_mapped;
-
- if (!boot_text_mapped)
- return;
- if (c != '\n' && scanhex(&val)) {
- switch (c) {
- case 'd':
- w = disp_bi.dispDeviceRowBytes
- / (disp_bi.dispDeviceDepth >> 3);
- disp_bi.dispDeviceDepth = val;
- disp_bi.dispDeviceRowBytes = w * (val >> 3);
- return;
- case 'p':
- disp_bi.dispDeviceRowBytes = val;
- return;
- case 'w':
- disp_bi.dispDeviceRect[2] = val;
- return;
- case 'h':
- disp_bi.dispDeviceRect[3] = val;
- return;
- }
- }
- printf("W = %d (0x%x) H = %d (0x%x) D = %d (0x%x) P = %d (0x%x)\n",
- disp_bi.dispDeviceRect[2], disp_bi.dispDeviceRect[2],
- disp_bi.dispDeviceRect[3], disp_bi.dispDeviceRect[3],
- disp_bi.dispDeviceDepth, disp_bi.dispDeviceDepth,
- disp_bi.dispDeviceRowBytes, disp_bi.dispDeviceRowBytes);
-}
-#endif /* CONFIG_BOOTX_TEXT */
static unsigned short fcstab[256] = {
0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
}
#else
-#ifndef CONFIG_PPC64BRIDGE
static void
dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
{
printf(" ... %x\n", last_va);
}
-#else /* CONFIG_PPC64BRIDGE */
-static void
-dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
-{
- extern void *Hash;
- extern unsigned long Hash_size;
- unsigned *htab = Hash;
- unsigned hsize = Hash_size;
- unsigned v, hmask, va, last_va;
- int found, last_found, i;
- unsigned *hg, w1, last_w2, last_va0;
-
- last_found = 0;
- hmask = hsize / 128 - 1;
- va = start;
- start = (start >> 12) & 0xffff;
- end = (end >> 12) & 0xffff;
- for (v = start; v < end; ++v) {
- found = 0;
- hg = htab + (((v ^ seg) & hmask) * 32);
- w1 = 1 | (seg << 12) | ((v & 0xf800) >> 4);
- for (i = 0; i < 8; ++i, hg += 4) {
- if (hg[1] == w1) {
- found = 1;
- break;
- }
- }
- if (!found) {
- w1 ^= 2;
- hg = htab + ((~(v ^ seg) & hmask) * 32);
- for (i = 0; i < 8; ++i, hg += 4) {
- if (hg[1] == w1) {
- found = 1;
- break;
- }
- }
- }
- if (!(last_found && found && (hg[3] & ~0x180) == last_w2 + 4096)) {
- if (last_found) {
- if (last_va != last_va0)
- printf(" ... %x", last_va);
- printf("\n");
- }
- if (found) {
- printf("%x to %x", va, hg[3]);
- last_va0 = va;
- }
- last_found = found;
- }
- if (found) {
- last_w2 = hg[3] & ~0x180;
- last_va = va;
- }
- va += 4096;
- }
- if (last_found)
- printf(" ... %x\n", last_va);
-}
-#endif /* CONFIG_PPC64BRIDGE */
-
static unsigned hash_ctx;
static unsigned hash_start;
static unsigned hash_end;
llgtr %r3,%r3 # const char *
lgfr %r4,%r4 # int
llgtr %r5,%r5 # const char *
+ lgfr %r6,%r6 # int
jg sys_linkat
.globl sys_symlinkat_wrapper
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
}
#endif
+ smp_setup_cpu_possible_map();
+
paging_init();
}
return 0;
}
+/* Constrain the number of cpus to max_cpus. */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
- int instance, mid;
-
- instance = 0;
- while (!cpu_find_by_instance(instance, NULL, &mid)) {
- if (mid < max_cpus)
- cpu_set(mid, phys_cpu_present_map);
- instance++;
- }
-
if (num_possible_cpus() > max_cpus) {
+ int instance, mid;
+
instance = 0;
while (!cpu_find_by_instance(instance, NULL, &mid)) {
if (mid != boot_cpu_id) {
smp_store_cpu_info(boot_cpu_id);
}
+/* Set this up early so that things like the scheduler can init
+ * properly. We use the same cpu mask for both the present and
+ * possible cpu map.
+ */
+void __init smp_setup_cpu_possible_map(void)
+{
+ int instance, mid;
+
+ instance = 0;
+ while (!cpu_find_by_instance(instance, NULL, &mid)) {
+ if (mid < NR_CPUS)
+ cpu_set(mid, phys_cpu_present_map);
+ instance++;
+ }
+}
+
void __devinit smp_prepare_boot_cpu(void)
{
if (hard_smp_processor_id() >= NR_CPUS) {
extern int read_cow_header(int (*reader)(__u64, char *, int, void *),
void *arg, __u32 *version_out,
char **backing_file_out, time_t *mtime_out,
- unsigned long long *size_out, int *sectorsize_out,
+ __u64 *size_out, int *sectorsize_out,
__u32 *align_out, int *bitmap_offset_out);
extern int write_cow_header(char *cow_file, int fd, char *backing_file,
return(uml_strdup(str));
}
-static inline int cow_seek_file(int fd, unsigned long long offset)
+static inline int cow_seek_file(int fd, __u64 offset)
{
return(os_seek_file(fd, offset));
}
-static inline int cow_file_size(char *file, unsigned long long *size_out)
+static inline int cow_file_size(char *file, __u64 *size_out)
{
return(os_file_size(file, size_out));
}
-static inline int cow_write_file(int fd, char *buf, int size)
+static inline int cow_write_file(int fd, void *buf, int size)
{
return(os_write_file(fd, buf, size));
}
err = -ENOMEM;
header = cow_malloc(sizeof(*header));
if(header == NULL){
- cow_printf("Failed to allocate COW V3 header\n");
+ cow_printf("write_cow_header - failed to allocate COW V3 header\n");
goto out;
}
header->magic = htonl(COW_MAGIC);
err = os_file_modtime(header->backing_file, &modtime);
if(err < 0){
- cow_printf("Backing file '%s' mtime request failed, "
- "err = %d\n", header->backing_file, -err);
+ cow_printf("write_cow_header - backing file '%s' mtime "
+ "request failed, err = %d\n", header->backing_file,
+ -err);
goto out_free;
}
err = cow_file_size(header->backing_file, size);
if(err < 0){
- cow_printf("Couldn't get size of backing file '%s', "
- "err = %d\n", header->backing_file, -err);
+ cow_printf("write_cow_header - couldn't get size of "
+ "backing file '%s', err = %d\n",
+ header->backing_file, -err);
goto out_free;
}
header->alignment = htonl(alignment);
header->cow_format = COW_BITMAP;
- err = os_write_file(fd, header, sizeof(*header));
+ err = cow_write_file(fd, header, sizeof(*header));
if(err != sizeof(*header)){
- cow_printf("Write of header to new COW file '%s' failed, "
- "err = %d\n", cow_file, -err);
+ cow_printf("write_cow_header - write of header to "
+ "new COW file '%s' failed, err = %d\n", cow_file,
+ -err);
goto out_free;
}
err = 0;
}
else if(version == 3){
if(n < sizeof(header->v3)){
- cow_printf("read_cow_header - failed to read V2 "
+ cow_printf("read_cow_header - failed to read V3 "
"header\n");
goto out;
}
if(err != sizeof(zero)){
cow_printf("Write of bitmap to new COW file '%s' failed, "
"err = %d\n", cow_file, -err);
- err = -EINVAL;
+ if (err >= 0)
+ err = -EINVAL;
goto out;
}
}
}
+/* Do reliable error handling as this fails frequently enough. */
void read_output(int fd, char *output, int len)
{
- int remain, n, actual;
+ int remain, ret, expected;
char c;
+ char *str;
if(output == NULL){
output = &c;
}
*output = '\0';
- n = os_read_file(fd, &remain, sizeof(remain));
- if(n != sizeof(remain)){
- printk("read_output - read of length failed, err = %d\n", -n);
- return;
+ ret = os_read_file(fd, &remain, sizeof(remain));
+
+ if (ret != sizeof(remain)) {
+ expected = sizeof(remain);
+ str = "length";
+ goto err;
}
while(remain != 0){
- n = (remain < len) ? remain : len;
- actual = os_read_file(fd, output, n);
- if(actual != n){
- printk("read_output - read of data failed, "
- "err = %d\n", -actual);
- return;
+ expected = (remain < len) ? remain : len;
+ ret = os_read_file(fd, output, expected);
+ if (ret != expected) {
+ str = "data";
+ goto err;
}
- remain -= actual;
+ remain -= ret;
}
+
return;
+
+err:
+ if (ret < 0)
+ printk("read_output - read of %s failed, errno = %d\n", str, -ret);
+ else
+ printk("read_output - read of %s failed, read only %d of %d bytes\n", str, ret, expected);
}
int net_read(int fd, void *buf, int len)
static int backing_file_mismatch(char *file, __u64 size, time_t mtime)
{
unsigned long modtime;
- long long actual;
+ unsigned long long actual;
int err;
err = os_file_modtime(file, &modtime);
#define __exitcall(fn) static exitcall_t __exitcall_##fn __exit_call = fn
-#define __init_call __attribute__ ((unused,__section__ (".initcall.init")))
+#define __init_call __attribute_used__ __attribute__ ((__section__ (".initcall.init")))
#endif
extern void os_kill_process(int pid, int reap_child);
extern void os_kill_ptraced_process(int pid, int reap_child);
extern void os_usr1_process(int pid);
+extern long os_ptrace_ldt(long pid, long addr, long data);
+
extern int os_getpid(void);
extern int os_getpgrp(void);
+
extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int));
extern void init_new_thread_signals(int altstack);
extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr);
snprintf(sock.sun_path, sizeof(sock.sun_path), "%s", name);
fd = socket(AF_UNIX, SOCK_STREAM, 0);
- if(fd < 0)
- return(fd);
+ if(fd < 0) {
+ err = -errno;
+ goto out;
+ }
err = connect(fd, (struct sockaddr *) &sock, sizeof(sock));
- if(err)
- return(-errno);
+ if(err) {
+ err = -errno;
+ goto out_close;
+ }
- return(fd);
+ return fd;
+
+out_close:
+ close(fd);
+out:
+ return err;
}
void os_close_file(int fd)
#include "irq_user.h"
#include "kern_util.h"
#include "longjmp.h"
+#include "skas_ptrace.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
}
+/* This is here uniquely to have access to the userspace errno, i.e. the one
+ * used by ptrace in case of error.
+ */
+
+long os_ptrace_ldt(long pid, long addr, long data)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_LDT, pid, addr, data);
+
+ if (ret < 0)
+ return -errno;
+ return ret;
+}
+
/* Kill off a ptraced child by all means available. kill it normally first,
* then PTRACE_KILL it, then PTRACE_CONT it in case it's in a run state from
* which it can't exit directly.
* So we need to switch child's mm into our userspace, then
* later switch back.
*
- * Note: I'm unshure: should interrupts be disabled here?
+ * Note: I'm unsure: should interrupts be disabled here?
*/
if(!current->active_mm || current->active_mm == &init_mm ||
mm_idp != ¤t->active_mm->context.skas.id)
pid = userspace_pid[cpu];
}
- res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op);
- if(res)
- res = errno;
+ res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op);
if(proc_mm)
put_cpu();
*/
cpu = get_cpu();
- res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0,
- (unsigned long) &ptrace_ldt);
+ res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt);
put_cpu();
if(res < 0)
goto out;
as it is off-chip. You can find the HPET spec at
<http://www.intel.com/hardwaredesign/hpetspec.htm>.
-config X86_PM_TIMER
- bool "PM timer" if EMBEDDED
- depends on ACPI
- default y
- help
- Support the ACPI PM timer for time keeping. This is slow,
- but is useful on some chipsets without HPET on systems with more
- than one CPU. On a single processor or single socket multi core
- system it is normally not required.
- When the PM timer is active 64bit vsyscalls are disabled
- and should not be enabled (/proc/sys/kernel/vsyscall64 should
- not be changed).
- The kernel selects the PM timer only as a last resort, so it is
- useful to enable just in case.
-
config HPET_EMULATE_RTC
bool "Provide RTC interrupt"
depends on HPET_TIMER && RTC=y
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc3
-# Mon Feb 13 22:31:24 2006
+# Linux kernel version: 2.6.16-rc3-git9
+# Sat Feb 18 00:27:03 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_FRAME_POINTER is not set
bootflag-y += ../../i386/kernel/bootflag.o
cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o
-topology-y += ../../i386/mach-default/topology.o
+topology-y += ../../i386/kernel/topology.o
microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o
intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o
quirks-y += ../../i386/kernel/quirks.o
/* Got the aperture from the AGP bridge */
} else if (swiotlb && !valid_agp) {
/* Do nothing */
- } else if ((!no_iommu && end_pfn >= MAX_DMA32_PFN) ||
+ } else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
force_iommu ||
valid_agp ||
fallback_aper_force) {
irq_exit();
}
+int __initdata unsync_tsc_on_multicluster;
+
/*
* oem_force_hpet_timer -- force HPET mode for some boxes.
*
* Thus far, the major user of this is IBM's Summit2 series:
*
- * Clustered boxes may have unsynced TSC problems if they are
+ * Some clustered boxes may have unsynced TSC problems if they are
* multi-chassis. Use available data to take a good guess.
* If in doubt, go HPET.
*/
unsigned id;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
+ /* Only do this check on IBM machines - big Unisys systems
+ use multiple clusters too, but have synchronized TSC */
+ if (!unsync_tsc_on_multicluster)
+ return 0;
+
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
for (i = 0; i < NR_CPUS; i++) {
int disable_timer_pin_1 __initdata;
+int timer_over_8254 __initdata = 1;
+
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
__setup("noapic", disable_ioapic_setup);
__setup("apic", enable_ioapic_setup);
+static int __init setup_disable_8254_timer(char *s)
+{
+ timer_over_8254 = -1;
+ return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+ timer_over_8254 = 2;
+ return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
#include <asm/pci-direct.h>
#include <linux/pci_ids.h>
#include <linux/pci.h>
#endif
/* RED-PEN skip them on mptables too? */
return;
+
+ /* This should be actually default, but
+ for 2.6.16 let's do it for ATI only where
+ it's really needed. */
case PCI_VENDOR_ID_ATI:
- if (apic_runs_main_timer != 0)
- break;
-#ifdef CONFIG_ACPI
- /* Don't do this for laptops right
- right now because their timer
- doesn't necessarily tick in C2/3 */
- if (acpi_fadt.revision >= 3 &&
- (acpi_fadt.plvl2_lat + acpi_fadt.plvl3_lat) < 1100) {
- printk(KERN_INFO
-"ATI board detected, but seems to be a laptop. Timer might be shakey, sorry\n");
- break;
- }
-#endif
+ if (timer_over_8254 == 1) {
+ timer_over_8254 = 0;
printk(KERN_INFO
- "ATI board detected. Using APIC/PM timer.\n");
- apic_runs_main_timer = 1;
- nohpet = 1;
+ "ATI board detected. Disabling timer routing over 8254.\n");
+ }
return;
}
+
/* No multi-function device? */
type = read_pci_config_byte(num,slot,func,
PCI_HEADER_TYPE);
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
* fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for modern platforms only.
*/
static inline void check_timer(void)
{
*/
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- enable_8259A_irq(0);
+ if (timer_over_8254 > 0)
+ enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
}
printk(" failed.\n");
- if (nmi_watchdog) {
+ if (nmi_watchdog == NMI_IO_APIC) {
printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = 0;
}
int mmu = high;
if (force_iommu)
mmu = 1;
- if (no_iommu) {
- if (high)
- panic("PCI-DMA: high address but no IOMMU.\n");
- mmu = 0;
- }
return mmu;
}
u64 mask = *dev->dma_mask;
int high = addr + size >= mask;
int mmu = high;
- if (no_iommu) {
- if (high)
- panic("PCI-DMA: high address but no IOMMU.\n");
- mmu = 0;
- }
return mmu;
}
for (i = 0; i < nents; i++) {
struct scatterlist *s = &sg[i];
- if (!s->dma_length)
+ if (!s->dma_length || !s->length)
break;
dma_unmap_single(dev, s->dma_address, s->dma_length, dir);
}
BUG_ON(i > start && s->offset);
if (i == start) {
+ *sout = *s;
sout->dma_address = iommu_bus_base;
sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
sout->dma_length = s->length;
{
if (!need) {
BUG_ON(stopat - start != 1);
+ *sout = sg[start];
sout->dma_length = sg[start].length;
return 0;
}
(agp_copy_info(agp_bridge, &info) < 0);
#endif
- if (swiotlb) {
- no_iommu = 1;
+ if (swiotlb)
return -1;
- }
-
+
if (no_iommu ||
(!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
!iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) {
- no_iommu = 1;
- no_iommu_init();
printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
if (end_pfn > MAX_DMA32_PFN) {
printk(KERN_ERR "WARNING more than 4GB of memory "
else if(!memcmp(from, "elfcorehdr=", 11))
elfcorehdr_addr = memparse(from+11, &from);
#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+ else if (!memcmp(from, "additional_cpus=", 16))
+ setup_additional_cpus(from+16);
+#endif
+
next_char:
c = *(from++);
if (!c)
setup_ioapic_dest();
#endif
- time_init_gtod();
-
check_nmi_watchdog();
}
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
}
-static __init int setup_additional_cpus(char *s)
+__init int setup_additional_cpus(char *s)
{
return get_option(&s, &additional_cpus);
}
extern void i8254_timer_resume(void);
extern int using_apic_timer;
+static char *time_init_gtod(void);
+
DEFINE_SPINLOCK(rtc_lock);
DEFINE_SPINLOCK(i8253_lock);
void __init time_init(void)
{
char *timename;
+ char *gtod;
#ifdef HPET_HACK_ENABLE_DANGEROUS
if (!vxtime.hpet_address) {
timename = "PIT";
}
- printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
- vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
+ vxtime.mode = VXTIME_TSC;
+ gtod = time_init_gtod();
+
+ printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
+ vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
- vxtime.mode = VXTIME_TSC;
vxtime.quot = (1000000L << 32) / vxtime_hz;
vxtime.tsc_quot = (1000L << 32) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
setup_irq(0, &irq0);
set_cyc2ns_scale(cpu_khz);
-
-#ifndef CONFIG_SMP
- time_init_gtod();
-#endif
}
/*
}
/*
- * Decide after all CPUs are booted what mode gettimeofday should use.
+ * Decide what mode gettimeofday should use.
*/
-void __init time_init_gtod(void)
+__init static char *time_init_gtod(void)
{
char *timetype;
timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
vxtime.mode = VXTIME_TSC;
}
-
- printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
+ return timetype;
}
__setup("report_lost_ticks", time_setup);
Enter the full path name to the file wich includes the AmlCode declaration.
config ACPI_BLACKLIST_YEAR
- int "Disable ACPI for systems before Jan 1st this year" if X86
+ int "Disable ACPI for systems before Jan 1st this year" if X86_32
default 0
help
enter a 4-digit year, eg. 2001 to disable ACPI by default
dump your ACPI DSDT table using /proc/acpi/dsdt.
config X86_PM_TIMER
- bool "Power Management Timer Support"
+ bool "Power Management Timer Support" if EMBEDDED
depends on X86
- depends on !X86_64
default y
help
The Power Management Timer is available on all ACPI-capable,
voltage scaling, unlike the commonly used Time Stamp Counter
(TSC) timing source.
- So, if you see messages like 'Losing too many ticks!' in the
- kernel logs, and/or you are using this on a notebook which
- does not yet have an HPET, you should say "Y" here.
+ You should nearly always say Y here because many modern
+ systems require this timer.
config ACPI_CONTAINER
tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"
#include <linux/suspend.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_ioctl.h>
+#include <scsi/scsi.h>
#include <asm/uaccess.h>
memcpy(rq->cmd, cgc->cmd, CDROM_PACKET_SIZE);
if (sizeof(rq->cmd) > CDROM_PACKET_SIZE)
memset(rq->cmd + CDROM_PACKET_SIZE, 0, sizeof(rq->cmd) - CDROM_PACKET_SIZE);
+ rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
rq->ref_count++;
rq->flags |= REQ_NOMERGE;
}
/*
- * 0 -- we can write to this track, 1 -- we can't
+ * 1 -- we can write to this track, 0 -- we can't
*/
-static int pkt_good_track(track_information *ti)
+static int pkt_writable_track(struct pktcdvd_device *pd, track_information *ti)
{
- /*
- * only good for CD-RW at the moment, not DVD-RW
- */
+ switch (pd->mmc3_profile) {
+ case 0x1a: /* DVD+RW */
+ case 0x12: /* DVD-RAM */
+ /* The track is always writable on DVD+RW/DVD-RAM */
+ return 1;
+ default:
+ break;
+ }
- /*
- * FIXME: only for FP
- */
- if (ti->fp == 0)
+ if (!ti->packet || !ti->fp)
return 0;
/*
* "good" settings as per Mt Fuji.
*/
- if (ti->rt == 0 && ti->blank == 0 && ti->packet == 1)
- return 0;
+ if (ti->rt == 0 && ti->blank == 0)
+ return 1;
- if (ti->rt == 0 && ti->blank == 1 && ti->packet == 1)
- return 0;
+ if (ti->rt == 0 && ti->blank == 1)
+ return 1;
- if (ti->rt == 1 && ti->blank == 0 && ti->packet == 1)
- return 0;
+ if (ti->rt == 1 && ti->blank == 0)
+ return 1;
printk("pktcdvd: bad state %d-%d-%d\n", ti->rt, ti->blank, ti->packet);
- return 1;
+ return 0;
}
/*
- * 0 -- we can write to this disc, 1 -- we can't
+ * 1 -- we can write to this disc, 0 -- we can't
*/
-static int pkt_good_disc(struct pktcdvd_device *pd, disc_information *di)
+static int pkt_writable_disc(struct pktcdvd_device *pd, disc_information *di)
{
switch (pd->mmc3_profile) {
case 0x0a: /* CD-RW */
case 0x1a: /* DVD+RW */
case 0x13: /* DVD-RW */
case 0x12: /* DVD-RAM */
- return 0;
+ return 1;
default:
VPRINTK("pktcdvd: Wrong disc profile (%x)\n", pd->mmc3_profile);
- return 1;
+ return 0;
}
/*
*/
if (di->disc_type == 0xff) {
printk("pktcdvd: Unknown disc. No track?\n");
- return 1;
+ return 0;
}
if (di->disc_type != 0x20 && di->disc_type != 0) {
printk("pktcdvd: Wrong disc type (%x)\n", di->disc_type);
- return 1;
+ return 0;
}
if (di->erasable == 0) {
printk("pktcdvd: Disc not erasable\n");
- return 1;
+ return 0;
}
if (di->border_status == PACKET_SESSION_RESERVED) {
printk("pktcdvd: Can't write to last track (reserved)\n");
- return 1;
+ return 0;
}
- return 0;
+ return 1;
}
static int pkt_probe_settings(struct pktcdvd_device *pd)
return ret;
}
- if (pkt_good_disc(pd, &di))
- return -ENXIO;
+ if (!pkt_writable_disc(pd, &di))
+ return -EROFS;
- switch (pd->mmc3_profile) {
- case 0x1a: /* DVD+RW */
- printk("pktcdvd: inserted media is DVD+RW\n");
- break;
- case 0x13: /* DVD-RW */
- printk("pktcdvd: inserted media is DVD-RW\n");
- break;
- case 0x12: /* DVD-RAM */
- printk("pktcdvd: inserted media is DVD-RAM\n");
- break;
- default:
- printk("pktcdvd: inserted media is CD-R%s\n", di.erasable ? "W" : "");
- break;
- }
pd->type = di.erasable ? PACKET_CDRW : PACKET_CDR;
track = 1; /* (di.last_track_msb << 8) | di.last_track_lsb; */
return ret;
}
- if (pkt_good_track(&ti)) {
+ if (!pkt_writable_track(pd, &ti)) {
printk("pktcdvd: can't write to this track\n");
- return -ENXIO;
+ return -EROFS;
}
/*
}
if (pd->settings.size > PACKET_MAX_SECTORS) {
printk("pktcdvd: packet size is too big\n");
- return -ENXIO;
+ return -EROFS;
}
pd->settings.fp = ti.fp;
pd->offset = (be32_to_cpu(ti.track_start) << 2) & (pd->settings.size - 1);
break;
default:
printk("pktcdvd: unknown data mode\n");
- return 1;
+ return -EROFS;
}
return 0;
}
if ((ret = pkt_probe_settings(pd))) {
VPRINTK("pktcdvd: %s failed probe\n", pd->name);
- return -EROFS;
+ return ret;
}
if ((ret = pkt_set_write_settings(pd))) {
due to kernel allocation issues), you could use PCI accesses
and have up to a couple gigs of texture space.
- Note that this is the only means to have XFree4/GLX use
+ Note that this is the only means to have X/GLX use
write-combining with MTRR support on the AGP bus. Without it, OpenGL
direct rendering will be a lot slower but still faster than PIO.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
-
To compile this driver as a module, choose M here: the
module will be called agpgart.
+ You should say Y here if you want to use GLX or DRI.
+
+ If unsure, say N.
+
config AGP_ALI
tristate "ALI chipset support"
depends on AGP && X86_32
---help---
This option gives you AGP support for the GLX component of
- XFree86 4.x on the following ALi chipsets. The supported chipsets
+ X on the following ALi chipsets. The supported chipsets
include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
For the ALi-chipset question, ALi suggests you refer to
<http://www.ali.com.tw/eng/support/index.shtml>.
timing issues, this chipset cannot do AGP 2x with the G200.
This is a hardware limitation. AGP 1x seems to be fine, though.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
-
config AGP_ATI
tristate "ATI chipset support"
depends on AGP && X86_32
---help---
- This option gives you AGP support for the GLX component of
- XFree86 4.x on the ATI RadeonIGP family of chipsets.
-
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
+ This option gives you AGP support for the GLX component of
+ X on the ATI RadeonIGP family of chipsets.
config AGP_AMD
tristate "AMD Irongate, 761, and 762 chipset support"
depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
- XFree86 4.x on AMD Irongate, 761, and 762 chipsets.
-
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
+ X on AMD Irongate, 761, and 762 chipsets.
config AGP_AMD64
tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU
default y if GART_IOMMU
help
This option gives you AGP support for the GLX component of
- XFree86 4.x using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
+ X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
You still need an external AGP bridge like the AMD 8151, VIA
K8T400M, SiS755. It may also support other AGP bridges when loaded
with agp_try_unsupported=1.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say Y
config AGP_INTEL
tristate "Intel 440LX/BX/GX, I8xx and E7x05 chipset support"
depends on AGP && X86
help
- This option gives you AGP support for the GLX component of XFree86 4.x
+ This option gives you AGP support for the GLX component of X
on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850, 860, 875,
- E7205 and E7505 chipsets and full support for the 810, 815, 830M, 845G,
- 852GM, 855GM, 865G and I915 integrated graphics chipsets.
+ E7205 and E7505 chipsets and full support for the 810, 815, 830M,
+ 845G, 852GM, 855GM, 865G and I915 integrated graphics chipsets.
+
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI, or if you have any Intel integrated graphics
- chipsets. If unsure, say Y.
config AGP_NVIDIA
tristate "NVIDIA nForce/nForce2 chipset support"
depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
- XFree86 4.x on the following NVIDIA chipsets. The supported chipsets
- include nForce and nForce2
+ X on NVIDIA chipsets including nForce and nForce2
config AGP_SIS
tristate "SiS chipset support"
depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
- XFree86 4.x on Silicon Integrated Systems [SiS] chipsets.
+ X on Silicon Integrated Systems [SiS] chipsets.
Note that 5591/5592 AGP chipsets are NOT supported.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
config AGP_SWORKS
tristate "Serverworks LE/HE chipset support"
depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
- XFree86 4.x on VIA MVP3/Apollo Pro chipsets.
-
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
+ X on VIA MVP3/Apollo Pro chipsets.
config AGP_I460
tristate "Intel 460GX chipset support"
This option gives you AGP support for the Transmeta Efficeon
series processors with integrated northbridges.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say Y.
-
config AGP_SGI_TIOCA
tristate "SGI TIO chipset AGP support"
depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC)
pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &apbase);
/* if x86-64 aperture base is beyond 4G, exit here */
- if ( (apbase & 0x7fff) >> (32 - 25) )
- return -ENODEV;
+ if ( (apbase & 0x7fff) >> (32 - 25) ) {
+ printk(KERN_INFO PFX "aperture base > 4G\n");
+ return -ENODEV;
+ }
apbase = (apbase & 0x7fff) << 25;
switch (pdev->device) {
case 0x0006:
- /* ServerWorks CNB20HE
- Fail silently.*/
- printk (KERN_ERR PFX "Detected ServerWorks CNB20HE chipset: No AGP present.\n");
+ printk (KERN_ERR PFX "ServerWorks CNB20HE is unsupported due to lack of documentation.\n");
return -ENODEV;
case PCI_DEVICE_ID_SERVERWORKS_HE:
void i915_driver_irq_uninstall(drm_device_t * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u16 temp;
+
if (!dev_priv)
return;
I915_WRITE16(I915REG_HWSTAM, 0xffff);
I915_WRITE16(I915REG_INT_MASK_R, 0xffff);
I915_WRITE16(I915REG_INT_ENABLE_R, 0x0);
+
+ temp = I915_READ16(I915REG_INT_IDENTITY_R);
+ I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
}
ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
ADD_RANGE(R300_GB_ENABLE, 1);
ADD_RANGE(R300_GB_MSPOS0, 5);
+ ADD_RANGE(R300_TX_CNTL, 1);
ADD_RANGE(R300_TX_ENABLE, 1);
ADD_RANGE(0x4200, 4);
ADD_RANGE(0x4214, 1);
return 0;
}
+static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv,
+ drm_radeon_kcmd_buffer_t *cmdbuf)
+{
+ u32 *cmd = (u32 *) cmdbuf->buf;
+ int count, ret;
+ RING_LOCALS;
+
+ count=(cmd[0]>>16) & 0x3fff;
+
+ if (cmd[0] & 0x8000) {
+ u32 offset;
+
+ if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL
+ | RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
+ offset = cmd[2] << 10;
+ ret = r300_check_offset(dev_priv, offset);
+ if (ret) {
+ DRM_ERROR("Invalid bitblt first offset is %08X\n", offset);
+ return DRM_ERR(EINVAL);
+ }
+ }
+
+ if ((cmd[1] & RADEON_GMC_SRC_PITCH_OFFSET_CNTL) &&
+ (cmd[1] & RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
+ offset = cmd[3] << 10;
+ ret = r300_check_offset(dev_priv, offset);
+ if (ret) {
+ DRM_ERROR("Invalid bitblt second offset is %08X\n", offset);
+ return DRM_ERR(EINVAL);
+ }
+
+ }
+ }
+
+ BEGIN_RING(count+2);
+ OUT_RING(cmd[0]);
+ OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1);
+ ADVANCE_RING();
+
+ cmdbuf->buf += (count+2)*4;
+ cmdbuf->bufsz -= (count+2)*4;
+
+ return 0;
+}
static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
drm_radeon_kcmd_buffer_t *cmdbuf)
case RADEON_3D_LOAD_VBPNTR: /* load vertex array pointers */
return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header);
+ case RADEON_CNTL_BITBLT_MULTI:
+ return r300_emit_bitblt_multi(dev_priv, cmdbuf);
+
case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */
case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */
case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */
/* END */
/* gap */
+/* Zero to flush caches. */
+#define R300_TX_CNTL 0x4100
+
/* The upper enable bits are guessed, based on fglrx reported limits. */
#define R300_TX_ENABLE 0x4104
# define R300_TX_ENABLE_0 (1 << 0)
* 1.19- Add support for gart table in FB memory and PCIE r300
* 1.20- Add support for r300 texrect
* 1.21- Add support for card type getparam
+ * 1.22- Add support for texture cache flushes (R300_TX_CNTL)
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 21
+#define DRIVER_MINOR 22
#define DRIVER_PATCHLEVEL 0
/*
} /* else count == 0 */
tty->driver_data = hp;
+ tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
+
hp->tty = tty;
/* Save for request_irq outside of spin_lock. */
irq = hp->irq;
tty_insert_flip_char(tty, buf[i], 0);
}
- if (count)
- tty_schedule_flip(tty);
-
/*
* Account for the total amount read in one loop, and if above
* 64 bytes, we do a quick schedule loop to let the tty grok
bail:
spin_unlock_irqrestore(&hp->lock, flags);
+ if (read_total)
+ tty_flip_buffer_push(tty);
+
return poll_mask;
}
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit ();
return 0;
+ }
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
+ }
}
/* Now we're pretty much convinced that there is an SI board here,
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit();
return 0;
+ }
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
+ }
}
printheader ();
static void moom_callback(void *ignored)
{
- out_of_memory(GFP_KERNEL, 0);
+ out_of_memory(&NODE_DATA(0)->node_zonelists[ZONE_NORMAL], GFP_KERNEL, 0);
}
static DECLARE_WORK(moom_work, moom_callback, NULL);
break;
case 32:
- E_KEY[4] = le32_to_cpu(in_key[4]);
- E_KEY[5] = le32_to_cpu(in_key[5]);
- E_KEY[6] = le32_to_cpu(in_key[6]);
- t = E_KEY[7] = le32_to_cpu(in_key[7]);
+ E_KEY[4] = le32_to_cpu(key[4]);
+ E_KEY[5] = le32_to_cpu(key[5]);
+ E_KEY[6] = le32_to_cpu(key[6]);
+ t = E_KEY[7] = le32_to_cpu(key[7]);
for (i = 0; i < 7; ++i)
loop8 (i);
break;
int i;
fcmd = &_fcmd;
- memset(fcmd, 0, sizeof(fcmd));
+ memset(fcmd, 0, sizeof(fcp_cmnd));
FCD(("PLOGI SID %d DID %d\n", fc->sid, alpa))
fch = &fcmd->fch;
FILL_FCHDR_RCTL_DID(fch, R_CTL_ELS_REQ, alpa);
/*
* SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
* if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows
- * inquiry.
+ * This hack makes the inquiry look more like a typical MS Windows inquiry
+ * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
*
* If force_inquiry_hack=1 is required for your device to work,
* please submit the logged sbp2_firmware_revision value of this device to
* the linux1394-devel mailing list.
*/
static int force_inquiry_hack;
-module_param(force_inquiry_hack, int, 0444);
+module_param(force_inquiry_hack, int, 0644);
MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
/*
},
};
-
-/* List of device firmware's that require a forced 36 byte inquiry. */
+/*
+ * List of device firmwares that require the inquiry hack.
+ * Yields a few false positives but did not break other devices so far.
+ */
static u32 sbp2_broken_inquiry_list[] = {
- 0x00002800, /* Stefan Richter <richtest@bauwesen.tu-cottbus.de> */
+ 0x00002800, /* Stefan Richter <stefanr@s5r6.in-berlin.de> */
/* DViCO Momobay CX-1 */
0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */
/* QPS Fire DVDBurner */
};
-#define NUM_BROKEN_INQUIRY_DEVS \
- (sizeof(sbp2_broken_inquiry_list)/sizeof(*sbp2_broken_inquiry_list))
-
/**************************************
* General utility functions
**************************************/
if (!scsi_id)
return 0;
- /* Trigger shutdown functions in scsi's highlevel. */
- if (scsi_id->scsi_host)
+ if (scsi_id->scsi_host) {
+ /* Get rid of enqueued commands if there is no chance to
+ * send them. */
+ if (!sbp2util_node_is_available(scsi_id))
+ sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT);
+ /* scsi_remove_device() will trigger shutdown functions of SCSI
+ * highlevel drivers which would deadlock if blocked. */
scsi_unblock_requests(scsi_id->scsi_host);
+ }
sdev = scsi_id->sdev;
if (sdev) {
scsi_id->sdev = NULL;
hi->host = ud->ne->host;
INIT_LIST_HEAD(&hi->scsi_ids);
- /* Register our sbp2 status address space... */
- hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host, &sbp2_ops,
- SBP2_STATUS_FIFO_ADDRESS,
- SBP2_STATUS_FIFO_ADDRESS +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(SBP2_MAX_UDS_PER_NODE+1));
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
/* Handle data movement if physical dma is not
* enabled/supportedon host controller */
list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids);
+ /* Register the status FIFO address range. We could use the same FIFO
+ * for targets at different nodes. However we need different FIFOs per
+ * target in order to support multi-unit devices. */
+ scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
+ &sbp2_highlevel, ud->ne->host, &sbp2_ops,
+ sizeof(struct sbp2_status_block), sizeof(quadlet_t),
+ ~0ULL, ~0ULL);
+ if (!scsi_id->status_fifo_addr) {
+ SBP2_ERR("failed to allocate status FIFO address range");
+ goto failed_alloc;
+ }
+
/* Register our host with the SCSI stack. */
scsi_host = scsi_host_alloc(&scsi_driver_template,
sizeof(unsigned long));
SBP2_DMA_FREE("single query logins data");
}
+ if (scsi_id->status_fifo_addr)
+ hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
+ scsi_id->status_fifo_addr);
+
scsi_id->ud->device.driver_data = NULL;
SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id);
ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response));
SBP2_DEBUG("sbp2_query_logins: reserved_resp_length initialized");
- scsi_id->query_logins_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->query_logins_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
- SBP2_STATUS_FIFO_ADDRESS_HI);
- SBP2_DEBUG("sbp2_query_logins: status FIFO initialized");
+ scsi_id->query_logins_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->query_logins_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb));
ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response));
SBP2_DEBUG("sbp2_login_device: passwd_resp_lengths initialized");
- scsi_id->login_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->login_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
- SBP2_STATUS_FIFO_ADDRESS_HI);
- SBP2_DEBUG("sbp2_login_device: status FIFO initialized");
+ scsi_id->login_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->login_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->logout_orb->reserved5 = 0x0;
- scsi_id->logout_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->logout_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
- SBP2_STATUS_FIFO_ADDRESS_HI);
+ scsi_id->logout_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->logout_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->reconnect_orb->reserved5 = 0x0;
- scsi_id->reconnect_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->reconnect_orb->status_FIFO_hi =
- (ORB_SET_NODE_ID(hi->host->node_id) | SBP2_STATUS_FIFO_ADDRESS_HI);
+ scsi_id->reconnect_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->reconnect_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
/* Check for a blacklisted set of devices that require us to force
* a 36 byte host inquiry. This can be overriden as a module param
* (to force all hosts). */
- for (i = 0; i < NUM_BROKEN_INQUIRY_DEVS; i++) {
+ for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
if ((firmware_revision & 0xffff00) ==
sbp2_broken_inquiry_list[i]) {
SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
return -EIO;
}
- /*
- * The scsi stack sends down a request_bufflen which does not match the
- * length field in the scsi cdb. This causes some sbp2 devices to
- * reject this inquiry command. Fix the request_bufflen.
- */
- if (*cmd == INQUIRY) {
- if (force_inquiry_hack || scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK)
- request_bufflen = cmd[4] = 0x24;
- else
- request_bufflen = cmd[4];
- }
-
/*
* Now actually fill in the comamnd orb and sbp2 s/g list
*/
SBP2_DEBUG("sbp2_check_sbp2_response");
- switch (SCpnt->cmnd[0]) {
-
- case INQUIRY:
+ if (SCpnt->cmnd[0] == INQUIRY && (SCpnt->cmnd[1] & 3) == 0) {
/*
* Make sure data length is ok. Minimum length is 36 bytes
*/
*/
scsi_buf[2] |= 2;
scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2;
-
- break;
-
- default:
- break;
}
- return;
}
/*
{
struct sbp2scsi_host_info *hi;
struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp;
- u32 id;
struct scsi_cmnd *SCpnt = NULL;
u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
struct sbp2_command_info *command;
}
/*
- * Find our scsi_id structure by looking at the status fifo address written to by
- * the sbp2 device.
+ * Find our scsi_id structure by looking at the status fifo address
+ * written to by the sbp2 device.
*/
- id = SBP2_STATUS_FIFO_OFFSET_TO_ENTRY((u32)(addr - SBP2_STATUS_FIFO_ADDRESS));
list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) {
- if (scsi_id_tmp->ne->nodeid == nodeid && scsi_id_tmp->ud->id == id) {
+ if (scsi_id_tmp->ne->nodeid == nodeid &&
+ scsi_id_tmp->status_fifo_addr == addr) {
scsi_id = scsi_id_tmp;
break;
}
static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
{
- ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev;
+ struct scsi_id_instance_data *scsi_id =
+ (struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
+ scsi_id->sdev = sdev;
+
+ if (force_inquiry_hack ||
+ scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+ sdev->inquiry_len = 36;
+ sdev->skip_ms_page_8 = 1;
+ }
return 0;
}
#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
#define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31)
-#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
-#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
+#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
+#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
#define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16)
-#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
-#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
-#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
-#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
-#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
-#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
+#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id))
+#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff)
+#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
+#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
+#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
+#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
+#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
+#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
struct sbp2_command_orb {
volatile u32 next_ORB_hi;
u32 login_response_lo;
u32 lun_misc;
u32 passwd_resp_lengths;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
#define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff)
u32 query_response_lo;
u32 lun_misc;
u32 reserved_resp_length;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
#define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff)
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
struct sbp2_logout_orb {
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff)
* Miscellaneous SBP2 related config rom defines
*/
-/* The status fifo address definition below is used as a base for each
- * node, which a chunk seperately assigned to each unit directory in the
- * node. For example, 0xfffe00000000ULL is used for the first sbp2 device
- * detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node
- * 0, and so on.
- *
- * Note: We could use a single status fifo address for all sbp2 devices,
- * and figure out which sbp2 device the status belongs to by looking at
- * the source node id of the status write... but, using separate addresses
- * for each sbp2 unit directory allows for better code and the ability to
- * support multiple luns within a single 1394 node.
- *
- * Also note that we choose the address range below as it is a region
- * specified for write posting, where the ohci controller will
- * automatically send an ack_complete when the status is written by the
- * sbp2 device... saving a split transaction. =)
- */
-#define SBP2_STATUS_FIFO_ADDRESS 0xfffe00000000ULL
-#define SBP2_STATUS_FIFO_ADDRESS_HI 0xfffe
-#define SBP2_STATUS_FIFO_ADDRESS_LO 0x0
-
-#define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry) ((entry) << 5)
-#define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset) ((offset) >> 5)
-
#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
#define SBP2_CSR_OFFSET_KEY 0x54
#define SBP2_UNIT_SPEC_ID_KEY 0x12
*/
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
-#define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */
#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
#define SBP2_MAX_CMDS 8 /* This should be safe */
u32 sbp2_lun;
u32 sbp2_firmware_revision;
+ /*
+ * Address for the device to write status blocks to
+ */
+ u64 status_fifo_addr;
+
/*
* Variable used for logins, reconnects, logouts, query logins
*/
static void free_dev(struct mapped_device *md)
{
- free_minor(md->disk->first_minor);
+ unsigned int minor = md->disk->first_minor;
+
+ if (md->suspended_bdev) {
+ thaw_bdev(md->suspended_bdev, NULL);
+ bdput(md->suspended_bdev);
+ }
mempool_destroy(md->tio_pool);
mempool_destroy(md->io_pool);
del_gendisk(md->disk);
+ free_minor(minor);
put_disk(md->disk);
blk_put_queue(md->queue);
kfree(md);
cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
cfi->chips[i].ref_point_counter = 0;
+ init_waitqueue_head(&(cfi->chips[i].wq));
}
map->fldrv = &cfi_intelext_chipdrv;
#define XIP_INVAL_CACHED_RANGE(map, from, size) \
INVALIDATE_CACHED_RANGE(map, from, size)
-#define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec) \
- UDELAY(map, chip, adr, usec)
+#define INVALIDATE_CACHE_UDELAY(map, chip, cmd_adr, adr, len, usec) \
+ UDELAY(map, chip, cmd_adr, usec)
/*
* Extra notes:
spin_lock(chip->mutex); \
} while (0)
-#define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec) \
+#define INVALIDATE_CACHE_UDELAY(map, chip, cmd_adr, adr, len, usec) \
do { \
spin_unlock(chip->mutex); \
INVALIDATE_CACHED_RANGE(map, adr, len); \
map_write(map, datum, adr);
chip->state = mode;
- INVALIDATE_CACHE_UDELAY(map, chip,
+ INVALIDATE_CACHE_UDELAY(map, chip, adr,
adr, map_bankwidth(map),
chip->word_write_time);
map_write(map, CMD(0xd0), cmd_adr);
chip->state = FL_WRITING;
- INVALIDATE_CACHE_UDELAY(map, chip,
- cmd_adr, len,
+ INVALIDATE_CACHE_UDELAY(map, chip, cmd_adr,
+ adr, len,
chip->buffer_write_time);
timeo = jiffies + (HZ/2);
chip->state = FL_ERASING;
chip->erase_suspended = 0;
- INVALIDATE_CACHE_UDELAY(map, chip,
+ INVALIDATE_CACHE_UDELAY(map, chip, adr,
adr, len,
chip->erase_time*1000/2);
struct sk_buff_head tq;
};
-static int numifbs = 1;
+static int numifbs = 2;
static void ri_tasklet(unsigned long dev);
static int ifb_xmit(struct sk_buff *skb, struct net_device *dev);
static void speed_bulk_callback(struct urb *urb, struct pt_regs *regs);
static void write_bulk_callback(struct urb *urb, struct pt_regs *regs);
static void irda_usb_receive(struct urb *urb, struct pt_regs *regs);
+static void irda_usb_rx_defer_expired(unsigned long data);
static int irda_usb_net_open(struct net_device *dev);
static int irda_usb_net_close(struct net_device *dev);
static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
* on the interrupt pipe and hang the Rx URB only when an interrupt is
* received.
* Jean II
+ *
+ * Note : don't read the above as what we are currently doing, but as
+ * something we could do with KC dongle. Also don't forget that the
+ * interrupt pipe is not part of the original standard, so this would
+ * need to be optional...
+ * Jean II
*/
/*------------------------------------------------------------------*/
/* Reinitialize URB */
usb_fill_bulk_urb(urb, self->usbdev,
usb_rcvbulkpipe(self->usbdev, self->bulk_in_ep),
- skb->data, skb->truesize,
+ skb->data, IRDA_SKB_MAX_MTU,
irda_usb_receive, skb);
- /* Note : unlink *must* be synchronous because of the code in
- * irda_usb_net_close() -> free the skb - Jean II */
urb->status = 0;
/* Can be called from irda_usb_receive (irq handler) -> GFP_ATOMIC */
struct irda_skb_cb *cb;
struct sk_buff *newskb;
struct sk_buff *dataskb;
+ struct urb *next_urb;
int docopy;
IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
if (urb->status != 0) {
switch (urb->status) {
case -EILSEQ:
- self->stats.rx_errors++;
self->stats.rx_crc_errors++;
- break;
+ /* Also precursor to a hot-unplug on UHCI. */
+ /* Fallthrough... */
case -ECONNRESET: /* -104 */
- IRDA_DEBUG(0, "%s(), Connection Reset (-104), transfer_flags 0x%04X \n", __FUNCTION__, urb->transfer_flags);
+ /* Random error, if I remember correctly */
/* uhci_cleanup_unlink() is going to kill the Rx
* URB just after we return. No problem, at this
* point the URB will be idle ;-) - Jean II */
- break;
+ case -ESHUTDOWN: /* -108 */
+ /* That's usually a hot-unplug. Submit will fail... */
+ case -ETIMEDOUT: /* -110 */
+ /* Usually precursor to a hot-unplug on OHCI. */
default:
- IRDA_DEBUG(0, "%s(), RX status %d,transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
+ self->stats.rx_errors++;
+ IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
break;
}
- goto done;
+ /* If we received an error, we don't want to resubmit the
+ * Rx URB straight away but to give the USB layer a little
+ * bit of breathing room.
+ * We are in the USB thread context, therefore there is a
+ * danger of recursion (new URB we submit fails, we come
+ * back here).
+ * With recent USB stack (2.6.15+), I'm seeing that on
+ * hot unplug of the dongle...
+ * Lowest effective timer is 10ms...
+ * Jean II */
+ self->rx_defer_timer.function = &irda_usb_rx_defer_expired;
+ self->rx_defer_timer.data = (unsigned long) urb;
+ mod_timer(&self->rx_defer_timer, jiffies + (10 * HZ / 1000));
+ return;
}
/* Check for empty frames */
* idle slot....
* Jean II */
/* Note : with this scheme, we could submit the idle URB before
- * processing the Rx URB. Another time... Jean II */
+ * processing the Rx URB. I don't think it would buy us anything as
+ * we are running in the USB thread context. Jean II */
+ next_urb = self->idle_rx_urb;
- /* Submit the idle URB to replace the URB we've just received */
- irda_usb_submit(self, skb, self->idle_rx_urb);
/* Recycle Rx URB : Now, the idle URB is the present one */
urb->context = NULL;
self->idle_rx_urb = urb;
+
+ /* Submit the idle URB to replace the URB we've just received.
+ * Do it last to avoid race conditions... Jean II */
+ irda_usb_submit(self, skb, next_urb);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * In case of errors, we want the USB layer to have time to recover.
+ * Now, it is time to resubmit ouur Rx URB...
+ */
+static void irda_usb_rx_defer_expired(unsigned long data)
+{
+ struct urb *urb = (struct urb *) data;
+ struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct irda_usb_cb *self;
+ struct irda_skb_cb *cb;
+ struct urb *next_urb;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Find ourselves */
+ cb = (struct irda_skb_cb *) skb->cb;
+ IRDA_ASSERT(cb != NULL, return;);
+ self = (struct irda_usb_cb *) cb->context;
+ IRDA_ASSERT(self != NULL, return;);
+
+ /* Same stuff as when Rx is done, see above... */
+ next_urb = self->idle_rx_urb;
+ urb->context = NULL;
+ self->idle_rx_urb = urb;
+ irda_usb_submit(self, skb, next_urb);
}
/*------------------------------------------------------------------*/
/* Stop network Tx queue */
netif_stop_queue(netdev);
+ /* Kill defered Rx URB */
+ del_timer(&self->rx_defer_timer);
+
/* Deallocate all the Rx path buffers (URBs and skb) */
for (i = 0; i < IU_MAX_RX_URBS; i++) {
struct urb *urb = self->rx_urb[i];
self = net->priv;
self->netdev = net;
spin_lock_init(&self->lock);
+ init_timer(&self->rx_defer_timer);
/* Create all of the needed urbs */
for (i = 0; i < IU_MAX_RX_URBS; i++) {
* This will stop/desactivate the Tx path. - Jean II */
self->present = 0;
+ /* Kill defered Rx URB */
+ del_timer(&self->rx_defer_timer);
+
/* We need to have irq enabled to unlink the URBs. That's OK,
* at this point the Tx path is gone - Jean II */
spin_unlock_irqrestore(&self->lock, flags);
/* Accept no more transmissions */
/*netif_device_detach(self->netdev);*/
netif_stop_queue(self->netdev);
- /* Stop all the receive URBs */
+ /* Stop all the receive URBs. Must be synchronous. */
for (i = 0; i < IU_MAX_RX_URBS; i++)
usb_kill_urb(self->rx_urb[i]);
/* Cancel Tx and speed URB.
- * Toggle flags to make sure it's synchronous. */
+ * Make sure it's synchronous to avoid races. */
usb_kill_urb(self->tx_urb);
usb_kill_urb(self->speed_urb);
}
__u16 bulk_out_mtu; /* Max Tx packet size in bytes */
__u8 bulk_int_ep; /* Interrupt Endpoint assignments */
- wait_queue_head_t wait_q; /* for timeouts */
-
struct urb *rx_urb[IU_MAX_RX_URBS]; /* URBs used to receive data frames */
struct urb *idle_rx_urb; /* Pointer to idle URB in Rx path */
struct urb *tx_urb; /* URB used to send data frames */
struct net_device_stats stats;
struct irlap_cb *irlap; /* The link layer we are binded to */
struct qos_info qos;
- hashbin_t *tx_list; /* Queued transmit skb's */
char *speed_buff; /* Buffer for speed changes */
struct timeval stamp;
struct timeval now;
- spinlock_t lock; /* For serializing operations */
+ spinlock_t lock; /* For serializing Tx operations */
__u16 xbofs; /* Current xbofs setting */
__s16 new_xbofs; /* xbofs we need to set */
__u32 speed; /* Current speed */
__s32 new_speed; /* speed we need to set */
+
+ struct timer_list rx_defer_timer; /* Wait for Rx error to clear */
};
TxInterFrameGapShift = 24,
TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+ /* Config1 register p.24 */
+ PMEnable = (1 << 0), /* Power Management Enable */
+
+ /* Config3 register p.25 */
+ MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
+ LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
+
+ /* Config5 register p.27 */
+ BWF = (1 << 6), /* Accept Broadcast wakeup frame */
+ MWF = (1 << 5), /* Accept Multicast wakeup frame */
+ UWF = (1 << 4), /* Accept Unicast wakeup frame */
+ LanWake = (1 << 1), /* LanWake enable/disable */
+ PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
+
/* TBICSR p.28 */
TBIReset = 0x80000000,
TBILoopback = 0x40000000,
unsigned int (*phy_reset_pending)(void __iomem *);
unsigned int (*link_ok)(void __iomem *);
struct work_struct task;
+ unsigned wol_enabled : 1;
};
MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
*duplex = p->duplex;
}
+static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u8 options;
+
+ wol->wolopts = 0;
+
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+ wol->supported = WAKE_ANY;
+
+ spin_lock_irq(&tp->lock);
+
+ options = RTL_R8(Config1);
+ if (!(options & PMEnable))
+ goto out_unlock;
+
+ options = RTL_R8(Config3);
+ if (options & LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (options & MagicPacket)
+ wol->wolopts |= WAKE_MAGIC;
+
+ options = RTL_R8(Config5);
+ if (options & UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (options & BWF)
+ wol->wolopts |= WAKE_BCAST;
+ if (options & MWF)
+ wol->wolopts |= WAKE_MCAST;
+
+out_unlock:
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+ static struct {
+ u32 opt;
+ u16 reg;
+ u8 mask;
+ } cfg[] = {
+ { WAKE_ANY, Config1, PMEnable },
+ { WAKE_PHY, Config3, LinkUp },
+ { WAKE_MAGIC, Config3, MagicPacket },
+ { WAKE_UCAST, Config5, UWF },
+ { WAKE_BCAST, Config5, BWF },
+ { WAKE_MCAST, Config5, MWF },
+ { WAKE_ANY, Config5, LanWake }
+ };
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ for (i = 0; i < ARRAY_SIZE(cfg); i++) {
+ u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
+ if (wol->wolopts & cfg[i].opt)
+ options |= cfg[i].mask;
+ RTL_W8(cfg[i].reg, options);
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ tp->wol_enabled = (wol->wolopts) ? 1 : 0;
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
static void rtl8169_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
.get_tso = ethtool_op_get_tso,
.set_tso = ethtool_op_set_tso,
.get_regs = rtl8169_get_regs,
+ .get_wol = rtl8169_get_wol,
+ .set_wol = rtl8169_set_wol,
.get_strings = rtl8169_get_strings,
.get_stats_count = rtl8169_get_stats_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
}
tp->chipset = i;
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
+ RTL_W8(Config5, RTL_R8(Config5) & PMEStatus);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
*ioaddr_out = ioaddr;
*dev_out = dev;
out:
pci_set_drvdata(pdev, NULL);
}
-#ifdef CONFIG_PM
-
-static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct rtl8169_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->mmio_addr;
- unsigned long flags;
-
- if (!netif_running(dev))
- return 0;
-
- netif_device_detach(dev);
- netif_stop_queue(dev);
- spin_lock_irqsave(&tp->lock, flags);
-
- /* Disable interrupts, stop Rx and Tx */
- RTL_W16(IntrMask, 0);
- RTL_W8(ChipCmd, 0);
-
- /* Update the error counts. */
- tp->stats.rx_missed_errors += RTL_R32(RxMissed);
- RTL_W32(RxMissed, 0);
- spin_unlock_irqrestore(&tp->lock, flags);
-
- return 0;
-}
-
-static int rtl8169_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
-
- if (!netif_running(dev))
- return 0;
-
- netif_device_attach(dev);
- rtl8169_hw_start(dev);
-
- return 0;
-}
-
-#endif /* CONFIG_PM */
-
static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
struct net_device *dev)
{
return &tp->stats;
}
+#ifdef CONFIG_PM
+
+static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ if (!netif_running(dev))
+ goto out;
+
+ netif_device_detach(dev);
+ netif_stop_queue(dev);
+
+ spin_lock_irq(&tp->lock);
+
+ rtl8169_asic_down(ioaddr);
+
+ tp->stats.rx_missed_errors += RTL_R32(RxMissed);
+ RTL_W32(RxMissed, 0);
+
+ spin_unlock_irq(&tp->lock);
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), tp->wol_enabled);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+out:
+ return 0;
+}
+
+static int rtl8169_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (!netif_running(dev))
+ goto out;
+
+ netif_device_attach(dev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+out:
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
static struct pci_driver rtl8169_pci_driver = {
.name = MODULENAME,
.id_table = rtl8169_pci_tbl,
printk("%2.2x.\n", net_dev->dev_addr[i]);
/* Detect Wake on Lan support */
- ret = inl(CFGPMC & PMESP);
+ ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
if (wol->wolopts == 0) {
pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
- cfgpmcsr |= ~PME_EN;
+ cfgpmcsr &= ~PME_EN;
pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
outl(pmctrl_bits, pmctrl_addr);
if (netif_msg_wol(sis_priv))
int i;
xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
- xm_read16(hw, port, XM_PHY_DATA);
+ *val = xm_read16(hw, port, XM_PHY_DATA);
- /* Need to wait for external PHY */
for (i = 0; i < PHY_RETRIES; i++) {
- udelay(1);
if (xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_RDY)
goto ready;
+ udelay(1);
}
return -ETIMEDOUT;
ready:
xm_write16(hw, port, XM_PHY_DATA, val);
- return 0;
+ for (i = 0; i < PHY_RETRIES; i++) {
+ if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
+ return 0;
+ udelay(1);
+ }
+ return -ETIMEDOUT;
}
static void genesis_init(struct skge_hw *hw)
u32 r;
const u8 zero[6] = { 0 };
- /* Clear MIB counters */
- xm_write16(hw, port, XM_STAT_CMD,
- XM_SC_CLR_RXC | XM_SC_CLR_TXC);
- /* Clear two times according to Errata #3 */
- xm_write16(hw, port, XM_STAT_CMD,
- XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+ for (i = 0; i < 10; i++) {
+ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
+ MFF_SET_MAC_RST);
+ if (skge_read16(hw, SK_REG(port, TX_MFF_CTRL1)) & MFF_SET_MAC_RST)
+ goto reset_ok;
+ udelay(1);
+ }
+
+ printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name);
+ reset_ok:
/* Unreset the XMAC. */
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
r |= GP_DIR_2|GP_IO_2;
skge_write32(hw, B2_GP_IO, r);
- skge_read32(hw, B2_GP_IO);
+
/* Enable GMII interface */
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
for (i = 1; i < 16; i++)
xm_outaddr(hw, port, XM_EXM(i), zero);
+ /* Clear MIB counters */
+ xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+ /* Clear two times according to Errata #3 */
+ xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+
/* configure Rx High Water Mark (XM_RX_HI_WM) */
xm_write16(hw, port, XM_RX_HI_WM, 1450);
skge->tx_avail = skge->tx_ring.count - 1;
/* Enable IRQ from port */
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= portirqmask[port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
/* Initialize MAC */
spin_lock_bh(&hw->phy_lock);
else
yukon_stop(skge);
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~portirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
/* Stop transmitter */
skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
/* restart receiver */
wmb();
- skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR),
- CSR_START | CSR_IRQ_CL_F);
+ skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START);
*budget -= work_done;
dev->quota -= work_done;
if (work_done >= to_do)
return 1; /* not done */
- netif_rx_complete(dev);
- hw->intr_mask |= portirqmask[skge->port];
- skge_write32(hw, B0_IMSK, hw->intr_mask);
- skge_read32(hw, B0_IMSK);
+ spin_lock_irq(&hw->hw_lock);
+ __netif_rx_complete(dev);
+ hw->intr_mask |= portirqmask[skge->port];
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
return 0;
}
}
spin_unlock(&hw->phy_lock);
- local_irq_disable();
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= IS_EXT_REG;
skge_write32(hw, B0_IMSK, hw->intr_mask);
- local_irq_enable();
-}
-
-static inline void skge_wakeup(struct net_device *dev)
-{
- struct skge_port *skge = netdev_priv(dev);
-
- prefetch(skge->rx_ring.to_clean);
- netif_rx_schedule(dev);
+ spin_unlock_irq(&hw->hw_lock);
}
static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
if (status == 0 || status == ~0) /* hotplug or shared irq */
return IRQ_NONE;
- status &= hw->intr_mask;
+ spin_lock(&hw->hw_lock);
if (status & IS_R1_F) {
+ skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R1_F;
- skge_wakeup(hw->dev[0]);
+ netif_rx_schedule(hw->dev[0]);
}
if (status & IS_R2_F) {
+ skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R2_F;
- skge_wakeup(hw->dev[1]);
+ netif_rx_schedule(hw->dev[1]);
}
if (status & IS_XA1_F)
}
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
hw->pdev = pdev;
spin_lock_init(&hw->phy_lock);
+ spin_lock_init(&hw->hw_lock);
tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw);
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
struct tasklet_struct ext_tasklet;
spinlock_t phy_lock;
+ spinlock_t hw_lock;
};
enum {
pr_debug("sky2_set_power_state %d\n", state);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
+ power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
(power_control & PCI_PM_CAP_PME_D3cold);
- pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
+ power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
power_control |= PCI_PM_CTRL_PME_STATUS;
power_control &= ~(PCI_PM_CTRL_STATE_MASK);
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
/* Turn off phy power saving */
- pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
/* looks like this XL is back asswards .. */
if (hw->ports > 1)
reg1 |= PCI_Y2_PHY2_COMA;
}
- pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
+ reg1 &= P_ASPM_CONTROL_MSK;
+ sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG5, 0);
+ }
+
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+
break;
case PCI_D3hot:
case PCI_D3cold:
/* Turn on phy power saving */
- pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
else
reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
- pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
ret = -1;
}
- pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control);
+ sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
return ret;
}
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+ /* apply fixes in PHY AFE */
+ gm_phy_write(hw, port, 22, 255);
+ /* increase differential signal amplitude in 10BASE-T */
+ gm_phy_write(hw, port, 24, 0xaa99);
+ gm_phy_write(hw, port, 23, 0x2011);
- if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
- /* turn on 100 Mbps LED (LED_LINK100) */
- ledover |= PHY_M_LED_MO_100(MO_LED_ON);
- }
+ /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
+ gm_phy_write(hw, port, 24, 0xa204);
+ gm_phy_write(hw, port, 23, 0x2002);
- if (ledover)
- gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+ /* set page register to 0 */
+ gm_phy_write(hw, port, 22, 0);
+ } else {
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+ if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
+ /* turn on 100 Mbps LED (LED_LINK100) */
+ ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+ }
+
+ if (ledover)
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+
+ }
/* Enable phy interrupt on auto-negotiation complete (or link up) */
if (sky2->autoneg == AUTONEG_ENABLE)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+ /* MAC Rx RAM Read is controlled by hardware */
+ sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
+ }
+
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
rx_set_checksum(sky2);
RB_RST_SET);
sky2_qset(hw, txqaddr[port]);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U)
- sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
+ /* Set almost empty threshold */
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1)
+ sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
goto err_out;
/* Enable interrupts from phy/mac for port */
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
return 0;
err_out:
netif_stop_queue(dev);
/* Disable port IRQ */
- local_irq_disable();
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
- local_irq_enable();
+ spin_unlock_irq(&hw->hw_lock);
flush_scheduled_work();
out:
up(&sky2->phy_sema);
- local_irq_disable();
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
- local_irq_enable();
+ spin_unlock_irq(&hw->hw_lock);
}
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+ /*
+ * Kick the STAT_LEV_TIMER_CTRL timer.
+ * This fixes my hangs on Yukon-EC (0xb6) rev 1.
+ * The if clause is there to start the timer only if it has been
+ * configured correctly and not been disabled via ethtool.
+ */
+ if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_START) {
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
+ }
+
hwidx = sky2_read16(hw, STAT_PUT_IDX);
BUG_ON(hwidx >= STATUS_RING_SIZE);
rmb();
sky2_tx_check(hw, 0, tx_done[0]);
sky2_tx_check(hw, 1, tx_done[1]);
+ if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+ }
+
if (likely(work_done < to_do)) {
- /* need to restart TX timer */
- if (is_ec_a1(hw)) {
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
- }
+ spin_lock_irq(&hw->hw_lock);
+ __netif_rx_complete(dev0);
- netif_rx_complete(dev0);
hw->intr_mask |= Y2_IS_STAT_BMU;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
+
return 0;
} else {
*budget -= work_done;
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
- pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err);
+ pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
pci_name(hw->pdev), pci_err);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_write_config_word(hw->pdev, PCI_STATUS,
+ sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
/* PCI-Express uncorrectable Error occurred */
u32 pex_err;
- pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
+ pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
/* clear the interrupt */
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
+ sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
0xffffffffUL);
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
+
schedule_work(&sky2->phy_task);
}
if (status == 0 || status == ~0)
return IRQ_NONE;
+ spin_lock(&hw->hw_lock);
if (status & Y2_IS_HW_ERR)
sky2_hw_intr(hw);
sky2_write32(hw, B0_Y2_SP_ICR, 2);
- sky2_read32(hw, B0_IMSK);
+ spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
{
u16 status;
u8 t8, pmd_type;
- int i, err;
+ int i;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
sky2_write8(hw, B0_CTST, CS_RST_CLR);
/* clear PCI errors, if any */
- err = pci_read_config_word(hw->pdev, PCI_STATUS, &status);
- if (err)
- goto pci_err;
+ status = sky2_pci_read16(hw, PCI_STATUS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- err = pci_write_config_word(hw->pdev, PCI_STATUS,
- status | PCI_STATUS_ERROR_BITS);
- if (err)
- goto pci_err;
+ sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
+
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
/* clear any PEX errors */
- if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
- err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
- 0xffffffffUL);
- if (err)
- goto pci_err;
- }
+ if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
+ sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
+
pmd_type = sky2_read8(hw, B2_PMD_TYP);
hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
- sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
- sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
+ sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7));
}
/* enable status unit */
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
return 0;
-
-pci_err:
- /* This is to catch a BIOS bug workaround where
- * mmconfig table doesn't have other buses.
- */
- printk(KERN_ERR PFX "%s: can't access PCI config space\n",
- pci_name(hw->pdev));
- return err;
}
static u32 sky2_supported_modes(const struct sky2_hw *hw)
(ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax))
return -EINVAL;
- if (ecmd->tx_max_coalesced_frames > 0xffff)
+ if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
return -EINVAL;
- if (ecmd->rx_max_coalesced_frames > 0xff)
+ if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
return -EINVAL;
- if (ecmd->rx_max_coalesced_frames_irq > 0xff)
+ if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
return -EINVAL;
if (ecmd->tx_coalesce_usecs == 0)
}
}
-#ifdef __BIG_ENDIAN
- /* byte swap descriptors in hardware */
- {
- u32 reg;
-
- pci_read_config_dword(pdev, PCI_DEV_REG2, ®);
- reg |= PCI_REV_DESC;
- pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
- }
-#endif
-
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
goto err_out_free_hw;
}
hw->pm_cap = pm_cap;
+ spin_lock_init(&hw->hw_lock);
+
+#ifdef __BIG_ENDIAN
+ /* byte swap descriptors in hardware */
+ {
+ u32 reg;
+
+ reg = sky2_pci_read32(hw, PCI_DEV_REG2);
+ reg |= PCI_REV_DESC;
+ sky2_pci_write32(hw, PCI_DEV_REG2, reg);
+ }
+#endif
/* ring for status responses */
hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
#define _SKY2_H
/* PCI config registers */
-#define PCI_DEV_REG1 0x40
-#define PCI_DEV_REG2 0x44
-#define PCI_DEV_STATUS 0x7c
-#define PCI_OS_PCI_X (1<<26)
+enum {
+ PCI_DEV_REG1 = 0x40,
+ PCI_DEV_REG2 = 0x44,
+ PCI_DEV_STATUS = 0x7c,
+ PCI_DEV_REG3 = 0x80,
+ PCI_DEV_REG4 = 0x84,
+ PCI_DEV_REG5 = 0x88,
+};
-#define PEX_LNK_STAT 0xf2
-#define PEX_UNC_ERR_STAT 0x104
-#define PEX_DEV_CTRL 0xe8
+enum {
+ PEX_DEV_CAP = 0xe4,
+ PEX_DEV_CTRL = 0xe8,
+ PEX_DEV_STA = 0xea,
+ PEX_LNK_STAT = 0xf2,
+ PEX_UNC_ERR_STAT= 0x104,
+};
/* Yukon-2 */
enum pci_dev_reg_1 {
PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */
};
+/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
+enum pci_dev_reg_4 {
+ /* (Link Training & Status State Machine) */
+ P_TIMER_VALUE_MSK = 0xffL<<16, /* Bit 23..16: Timer Value Mask */
+ /* (Active State Power Management) */
+ P_FORCE_ASPM_REQUEST = 1<<15, /* Force ASPM Request (A1 only) */
+ P_ASPM_GPHY_LINK_DOWN = 1<<14, /* GPHY Link Down (A1 only) */
+ P_ASPM_INT_FIFO_EMPTY = 1<<13, /* Internal FIFO Empty (A1 only) */
+ P_ASPM_CLKRUN_REQUEST = 1<<12, /* CLKRUN Request (A1 only) */
+
+ P_ASPM_FORCE_CLKREQ_ENA = 1<<4, /* Force CLKREQ Enable (A1b only) */
+ P_ASPM_CLKREQ_PAD_CTL = 1<<3, /* CLKREQ PAD Control (A1 only) */
+ P_ASPM_A1_MODE_SELECT = 1<<2, /* A1 Mode Select (A1 only) */
+ P_CLK_GATE_PEX_UNIT_ENA = 1<<1, /* Enable Gate PEX Unit Clock */
+ P_CLK_GATE_ROOT_COR_ENA = 1<<0, /* Enable Gate Root Core Clock */
+ P_ASPM_CONTROL_MSK = P_FORCE_ASPM_REQUEST | P_ASPM_GPHY_LINK_DOWN
+ | P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY,
+};
+
#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
PCI_STATUS_SIG_SYSTEM_ERROR | \
};
#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
+/* Q_F 32 bit Flag Register */
+enum {
+ F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */
+ F_EMPTY = 1<<27, /* Tx FIFO: empty flag */
+ F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */
+ F_WM_REACHED = 1<<25, /* Watermark reached */
+ F_M_RX_RAM_DIS = 1<<24, /* MAC Rx RAM Read Port disable */
+ F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */
+ F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */
+};
/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
enum {
PHY_BCOM_ID1_C0 = 0x6044,
PHY_BCOM_ID1_C5 = 0x6047,
- PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
+ PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */
- PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
- PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
+ PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
+ PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
+ PHY_MARV_ID1_FE = 0x0C83, /* Yukon-FE (PHY 88E3082 Rev.A1) */
+ PHY_MARV_ID1_ECU= 0x0CB0, /* Yukon-ECU (PHY 88E1149 Rev.B2?) */
};
/* Advertisement register bits */
struct sky2_hw {
void __iomem *regs;
struct pci_dev *pdev;
- u32 intr_mask;
struct net_device *dev[2];
+ spinlock_t hw_lock;
+ u32 intr_mask;
int pm_cap;
int msi;
gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
}
+
+/* PCI config space access */
+static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
+{
+ return sky2_read32(hw, Y2_CFG_SPC + reg);
+}
+
+static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
+{
+ return sky2_read16(hw, Y2_CFG_SPC + reg);
+}
+
+static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
+{
+ sky2_write32(hw, Y2_CFG_SPC + reg, val);
+}
+
+static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
+{
+ sky2_write16(hw, Y2_CFG_SPC + reg, val);
+}
#endif
u16 device_id;
int reg, rc = -ENODEV;
+#ifdef CONFIG_PCI
if (pdev) {
rc = pci_enable_device(pdev);
if (rc)
goto err_out;
}
}
+#endif /* CONFIG_PCI */
dev = alloc_etherdev(sizeof(TLanPrivateInfo));
if (dev == NULL) {
}
default:
- IPW_ERROR("Unknown notification: "
- "subtype=%d,flags=0x%2x,size=%d\n",
- notif->subtype, notif->flags, notif->size);
+ IPW_DEBUG_NOTIF("Unknown notification: "
+ "subtype=%d,flags=0x%2x,size=%d\n",
+ notif->subtype, notif->flags, notif->size);
}
}
Disks under VM. If you are not running under VM or unsure what it is,
say "N".
-config DASD_EER
- tristate "Extended error reporting (EER)"
- depends on DASD
- help
- This driver provides a character device interface to the
- DASD extended error reporting. This is only needed if you want to
- use applications written for the EER facility.
-
config DASD_CMB
tristate "Compatibility interface for DASD channel measurement blocks"
depends on DASD
help
- This driver provides an additional interface to the channel
- measurement facility, which is normally accessed though sysfs, with
- a set of ioctl functions specific to the dasd driver.
+ This driver provides an additional interface to the channel measurement
+ facility, which is normally accessed though sysfs, with a set of
+ ioctl functions specific to the dasd driver.
This is only needed if you want to use applications written for
linux-2.4 dasd channel measurement facility interface.
dasd_eckd_mod-objs := dasd_eckd.o dasd_3990_erp.o dasd_9343_erp.o
dasd_fba_mod-objs := dasd_fba.o dasd_3370_erp.o dasd_9336_erp.o
dasd_diag_mod-objs := dasd_diag.o
-dasd_eer_mod-objs := dasd_eer.o
dasd_mod-objs := dasd.o dasd_ioctl.o dasd_proc.o dasd_devmap.o \
dasd_genhd.o dasd_erp.o
obj-$(CONFIG_DASD_ECKD) += dasd_eckd_mod.o
obj-$(CONFIG_DASD_FBA) += dasd_fba_mod.o
obj-$(CONFIG_DASD_CMB) += dasd_cmb.o
-obj-$(CONFIG_DASD_EER) += dasd_eer.o
obj-$(CONFIG_BLK_DEV_XPRAM) += xpram.o
obj-$(CONFIG_DCSSBLK) += dcssblk.o
#include <linux/slab.h>
#include <linux/buffer_head.h>
#include <linux/hdreg.h>
-#include <linux/notifier.h>
#include <asm/ccwdev.h>
#include <asm/ebcdic.h>
static void dasd_flush_ccw_queue(struct dasd_device *, int);
static void dasd_tasklet(struct dasd_device *);
static void do_kick_device(void *data);
-static void dasd_disable_eer(struct dasd_device *device);
/*
* SECTION: Operations on the device structure.
static inline void
dasd_state_known_to_new(struct dasd_device * device)
{
- /* disable extended error reporting for this device */
- dasd_disable_eer(device);
/* Forget the discipline information. */
+ if (device->discipline)
+ module_put(device->discipline->owner);
device->discipline = NULL;
+ if (device->base_discipline)
+ module_put(device->base_discipline->owner);
+ device->base_discipline = NULL;
device->state = DASD_STATE_NEW;
dasd_free_queue(device);
struct dasd_ccw_req *cqr;
struct list_head *l, *n;
- /* first of all call extended error reporting */
- dasd_write_eer_trigger(DASD_EER_STATECHANGE, device, NULL);
-
device->stopped &= ~DASD_STOPPED_PENDING;
/* restart all 'running' IO on queue */
}
goto restart;
}
-
- /* first of all call extended error reporting */
- if (device->eer && cqr->status == DASD_CQR_FAILED) {
- dasd_write_eer_trigger(DASD_EER_FATALERROR,
- device, cqr);
-
- /* restart request */
- cqr->status = DASD_CQR_QUEUED;
- cqr->retries = 255;
- device->stopped |= DASD_STOPPED_QUIESCE;
- goto restart;
- }
-
/* Process finished ERP request. */
if (cqr->refers) {
__dasd_process_erp(device, cqr);
cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list);
/* check FAILFAST */
if (device->stopped & ~DASD_STOPPED_PENDING &&
- test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) &&
- (!device->eer)) {
+ test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags)) {
cqr->status = DASD_CQR_FAILED;
dasd_schedule_bh(device);
}
*/
int
dasd_generic_set_online (struct ccw_device *cdev,
- struct dasd_discipline *discipline)
+ struct dasd_discipline *base_discipline)
{
+ struct dasd_discipline *discipline;
struct dasd_device *device;
int rc;
if (IS_ERR(device))
return PTR_ERR(device);
+ discipline = base_discipline;
if (device->features & DASD_FEATURE_USEDIAG) {
if (!dasd_diag_discipline_pointer) {
printk (KERN_WARNING
}
discipline = dasd_diag_discipline_pointer;
}
+ if (!try_module_get(base_discipline->owner)) {
+ dasd_delete_device(device);
+ return -EINVAL;
+ }
+ if (!try_module_get(discipline->owner)) {
+ module_put(base_discipline->owner);
+ dasd_delete_device(device);
+ return -EINVAL;
+ }
+ device->base_discipline = base_discipline;
device->discipline = discipline;
rc = discipline->check_device(device);
"dasd_generic couldn't online device %s "
"with discipline %s rc=%i\n",
cdev->dev.bus_id, discipline->name, rc);
+ module_put(discipline->owner);
+ module_put(base_discipline->owner);
dasd_delete_device(device);
return rc;
}
switch (event) {
case CIO_GONE:
case CIO_NO_PATH:
- /* first of all call extended error reporting */
- dasd_write_eer_trigger(DASD_EER_NOPATH, device, NULL);
-
if (device->state < DASD_STATE_BASIC)
break;
/* Device is active. We want to keep it. */
put_driver(drv);
}
-/*
- * notifications for extended error reports
- */
-static struct notifier_block *dasd_eer_chain;
-
-int
-dasd_register_eer_notifier(struct notifier_block *nb)
-{
- return notifier_chain_register(&dasd_eer_chain, nb);
-}
-
-int
-dasd_unregister_eer_notifier(struct notifier_block *nb)
-{
- return notifier_chain_unregister(&dasd_eer_chain, nb);
-}
-
-/*
- * Notify the registered error reporting module of a problem
- */
-void
-dasd_write_eer_trigger(unsigned int id, struct dasd_device *device,
- struct dasd_ccw_req *cqr)
-{
- if (device->eer) {
- struct dasd_eer_trigger temp;
- temp.id = id;
- temp.device = device;
- temp.cqr = cqr;
- notifier_call_chain(&dasd_eer_chain, DASD_EER_TRIGGER,
- (void *)&temp);
- }
-}
-
-/*
- * Tell the registered error reporting module to disable error reporting for
- * a given device and to cleanup any private data structures on that device.
- */
-static void
-dasd_disable_eer(struct dasd_device *device)
-{
- notifier_call_chain(&dasd_eer_chain, DASD_EER_DISABLE, (void *)device);
-}
-
-
static int __init
dasd_init(void)
{
EXPORT_SYMBOL_GPL(dasd_generic_set_offline);
EXPORT_SYMBOL_GPL(dasd_generic_auto_online);
-EXPORT_SYMBOL(dasd_register_eer_notifier);
-EXPORT_SYMBOL(dasd_unregister_eer_notifier);
-EXPORT_SYMBOL(dasd_write_eer_trigger);
-
-
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
case 0x0B:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Volume is suspended duplex");
- /* call extended error reporting (EER) */
- dasd_write_eer_trigger(DASD_EER_PPRCSUSPEND, device,
- erp->refers);
break;
case 0x0C:
DEV_MESSAGE(KERN_WARNING, device, "%s",
#define DASD_ECKD_CCW_PSF 0x27
#define DASD_ECKD_CCW_RSSD 0x3e
#define DASD_ECKD_CCW_LOCATE_RECORD 0x47
-#define DASD_ECKD_CCW_SNSS 0x54
#define DASD_ECKD_CCW_DEFINE_EXTENT 0x63
#define DASD_ECKD_CCW_WRITE_MT 0x85
#define DASD_ECKD_CCW_READ_MT 0x86
+++ /dev/null
-/*
- * character device driver for extended error reporting
- *
- *
- * Copyright (C) 2005 IBM Corporation
- * extended error reporting for DASD ECKD devices
- * Author(s): Stefan Weinhuber <wein@de.ibm.com>
- *
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/workqueue.h>
-#include <linux/poll.h>
-#include <linux/notifier.h>
-
-#include <asm/uaccess.h>
-#include <asm/semaphore.h>
-#include <asm/atomic.h>
-#include <asm/ebcdic.h>
-
-#include "dasd_int.h"
-#include "dasd_eckd.h"
-
-
-MODULE_LICENSE("GPL");
-
-MODULE_AUTHOR("Stefan Weinhuber <wein@de.ibm.com>");
-MODULE_DESCRIPTION("DASD extended error reporting module");
-
-
-#ifdef PRINTK_HEADER
-#undef PRINTK_HEADER
-#endif /* PRINTK_HEADER */
-#define PRINTK_HEADER "dasd(eer):"
-
-
-
-
-
-/*****************************************************************************/
-/* the internal buffer */
-/*****************************************************************************/
-
-/*
- * The internal buffer is meant to store obaque blobs of data, so it doesn't
- * know of higher level concepts like triggers.
- * It consists of a number of pages that are used as a ringbuffer. Each data
- * blob is stored in a simple record that consists of an integer, which
- * contains the size of the following data, and the data bytes themselfes.
- *
- * To allow for multiple independent readers we create one internal buffer
- * each time the device is opened and destroy the buffer when the file is
- * closed again.
- *
- * One record can be written to a buffer by using the functions
- * - dasd_eer_start_record (one time per record to write the size to the buffer
- * and reserve the space for the data)
- * - dasd_eer_write_buffer (one or more times per record to write the data)
- * The data can be written in several steps but you will have to compute
- * the total size up front for the invocation of dasd_eer_start_record.
- * If the ringbuffer is full, dasd_eer_start_record will remove the required
- * number of old records.
- *
- * A record is typically read in two steps, first read the integer that
- * specifies the size of the following data, then read the data.
- * Both can be done by
- * - dasd_eer_read_buffer
- *
- * For all mentioned functions you need to get the bufferlock first and keep it
- * until a complete record is written or read.
- */
-
-
-/*
- * Alle information necessary to keep track of an internal buffer is kept in
- * a struct eerbuffer. The buffer specific to a file pointer is strored in
- * the private_data field of that file. To be able to write data to all
- * existing buffers, each buffer is also added to the bufferlist.
- * If the user doesn't want to read a complete record in one go, we have to
- * keep track of the rest of the record. residual stores the number of bytes
- * that are still to deliver. If the rest of the record is invalidated between
- * two reads then residual will be set to -1 so that the next read will fail.
- * All entries in the eerbuffer structure are protected with the bufferlock.
- * To avoid races between writing to a buffer on the one side and creating
- * and destroying buffers on the other side, the bufferlock must also be used
- * to protect the bufferlist.
- */
-
-struct eerbuffer {
- struct list_head list;
- char **buffer;
- int buffersize;
- int buffer_page_count;
- int head;
- int tail;
- int residual;
-};
-
-LIST_HEAD(bufferlist);
-
-static spinlock_t bufferlock = SPIN_LOCK_UNLOCKED;
-
-DECLARE_WAIT_QUEUE_HEAD(dasd_eer_read_wait_queue);
-
-/*
- * How many free bytes are available on the buffer.
- * needs to be called with bufferlock held
- */
-static int
-dasd_eer_get_free_bytes(struct eerbuffer *eerb)
-{
- if (eerb->head < eerb->tail) {
- return eerb->tail - eerb->head - 1;
- } else
- return eerb->buffersize - eerb->head + eerb->tail -1;
-}
-
-/*
- * How many bytes of buffer space are used.
- * needs to be called with bufferlock held
- */
-static int
-dasd_eer_get_filled_bytes(struct eerbuffer *eerb)
-{
-
- if (eerb->head >= eerb->tail) {
- return eerb->head - eerb->tail;
- } else
- return eerb->buffersize - eerb->tail + eerb->head;
-}
-
-/*
- * The dasd_eer_write_buffer function just copies count bytes of data
- * to the buffer. Make sure to call dasd_eer_start_record first, to
- * make sure that enough free space is available.
- * needs to be called with bufferlock held
- */
-static void
-dasd_eer_write_buffer(struct eerbuffer *eerb, int count, char *data)
-{
-
- unsigned long headindex,localhead;
- unsigned long rest, len;
- char *nextdata;
-
- nextdata = data;
- rest = count;
- while (rest > 0) {
- headindex = eerb->head / PAGE_SIZE;
- localhead = eerb->head % PAGE_SIZE;
- len = min(rest, (PAGE_SIZE - localhead));
- memcpy(eerb->buffer[headindex]+localhead, nextdata, len);
- nextdata += len;
- rest -= len;
- eerb->head += len;
- if ( eerb->head == eerb->buffersize )
- eerb->head = 0; /* wrap around */
- if (eerb->head > eerb->buffersize) {
- MESSAGE(KERN_ERR, "%s", "runaway buffer head.");
- BUG();
- }
- }
-}
-
-/*
- * needs to be called with bufferlock held
- */
-static int
-dasd_eer_read_buffer(struct eerbuffer *eerb, int count, char *data)
-{
-
- unsigned long tailindex,localtail;
- unsigned long rest, len, finalcount;
- char *nextdata;
-
- finalcount = min(count, dasd_eer_get_filled_bytes(eerb));
- nextdata = data;
- rest = finalcount;
- while (rest > 0) {
- tailindex = eerb->tail / PAGE_SIZE;
- localtail = eerb->tail % PAGE_SIZE;
- len = min(rest, (PAGE_SIZE - localtail));
- memcpy(nextdata, eerb->buffer[tailindex]+localtail, len);
- nextdata += len;
- rest -= len;
- eerb->tail += len;
- if ( eerb->tail == eerb->buffersize )
- eerb->tail = 0; /* wrap around */
- if (eerb->tail > eerb->buffersize) {
- MESSAGE(KERN_ERR, "%s", "runaway buffer tail.");
- BUG();
- }
- }
- return finalcount;
-}
-
-/*
- * Whenever you want to write a blob of data to the internal buffer you
- * have to start by using this function first. It will write the number
- * of bytes that will be written to the buffer. If necessary it will remove
- * old records to make room for the new one.
- * needs to be called with bufferlock held
- */
-static int
-dasd_eer_start_record(struct eerbuffer *eerb, int count)
-{
- int tailcount;
- if (count + sizeof(count) > eerb->buffersize)
- return -ENOMEM;
- while (dasd_eer_get_free_bytes(eerb) < count + sizeof(count)) {
- if (eerb->residual > 0) {
- eerb->tail += eerb->residual;
- if (eerb->tail >= eerb->buffersize)
- eerb->tail -= eerb->buffersize;
- eerb->residual = -1;
- }
- dasd_eer_read_buffer(eerb, sizeof(tailcount),
- (char*)(&tailcount));
- eerb->tail += tailcount;
- if (eerb->tail >= eerb->buffersize)
- eerb->tail -= eerb->buffersize;
- }
- dasd_eer_write_buffer(eerb, sizeof(count), (char*)(&count));
-
- return 0;
-};
-
-/*
- * release pages that are not used anymore
- */
-static void
-dasd_eer_free_buffer_pages(char **buf, int no_pages)
-{
- int i;
-
- for (i = 0; i < no_pages; ++i) {
- free_page((unsigned long)buf[i]);
- }
-}
-
-/*
- * allocate a new set of memory pages
- */
-static int
-dasd_eer_allocate_buffer_pages(char **buf, int no_pages)
-{
- int i;
-
- for (i = 0; i < no_pages; ++i) {
- buf[i] = (char *) get_zeroed_page(GFP_KERNEL);
- if (!buf[i]) {
- dasd_eer_free_buffer_pages(buf, i);
- return -ENOMEM;
- }
- }
- return 0;
-}
-
-/*
- * empty the buffer by resetting head and tail
- * In case there is a half read data blob in the buffer, we set residual
- * to -1 to indicate that the remainder of the blob is lost.
- */
-static void
-dasd_eer_purge_buffer(struct eerbuffer *eerb)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&bufferlock, flags);
- if (eerb->residual > 0)
- eerb->residual = -1;
- eerb->tail=0;
- eerb->head=0;
- spin_unlock_irqrestore(&bufferlock, flags);
-}
-
-/*
- * set the size of the buffer, newsize is the new number of pages to be used
- * we don't try to copy any data back an forth, so any resize will also purge
- * the buffer
- */
-static int
-dasd_eer_resize_buffer(struct eerbuffer *eerb, int newsize)
-{
- int i, oldcount, reuse;
- char **new;
- char **old;
- unsigned long flags;
-
- if (newsize < 1)
- return -EINVAL;
- if (eerb->buffer_page_count == newsize) {
- /* documented behaviour is that any successfull invocation
- * will purge all records */
- dasd_eer_purge_buffer(eerb);
- return 0;
- }
- new = kmalloc(newsize*sizeof(char*), GFP_KERNEL);
- if (!new)
- return -ENOMEM;
-
- reuse=min(eerb->buffer_page_count, newsize);
- for (i = 0; i < reuse; ++i) {
- new[i] = eerb->buffer[i];
- }
- if (eerb->buffer_page_count < newsize) {
- if (dasd_eer_allocate_buffer_pages(
- &new[eerb->buffer_page_count],
- newsize - eerb->buffer_page_count)) {
- kfree(new);
- return -ENOMEM;
- }
- }
-
- spin_lock_irqsave(&bufferlock, flags);
- old = eerb->buffer;
- eerb->buffer = new;
- if (eerb->residual > 0)
- eerb->residual = -1;
- eerb->tail = 0;
- eerb->head = 0;
- oldcount = eerb->buffer_page_count;
- eerb->buffer_page_count = newsize;
- spin_unlock_irqrestore(&bufferlock, flags);
-
- if (oldcount > newsize) {
- for (i = newsize; i < oldcount; ++i) {
- free_page((unsigned long)old[i]);
- }
- }
- kfree(old);
-
- return 0;
-}
-
-
-/*****************************************************************************/
-/* The extended error reporting functionality */
-/*****************************************************************************/
-
-/*
- * When a DASD device driver wants to report an error, it calls the
- * function dasd_eer_write_trigger (via a notifier mechanism) and gives the
- * respective trigger ID as parameter.
- * Currently there are four kinds of triggers:
- *
- * DASD_EER_FATALERROR: all kinds of unrecoverable I/O problems
- * DASD_EER_PPRCSUSPEND: PPRC was suspended
- * DASD_EER_NOPATH: There is no path to the device left.
- * DASD_EER_STATECHANGE: The state of the device has changed.
- *
- * For the first three triggers all required information can be supplied by
- * the caller. For these triggers a record is written by the function
- * dasd_eer_write_standard_trigger.
- *
- * When dasd_eer_write_trigger is called to write a DASD_EER_STATECHANGE
- * trigger, we have to gather the necessary sense data first. We cannot queue
- * the necessary SNSS (sense subsystem status) request immediatly, since we
- * are likely to run in a deadlock situation. Instead, we schedule a
- * work_struct that calls the function dasd_eer_sense_subsystem_status to
- * create and start an SNSS request asynchronously.
- *
- * To avoid memory allocations at runtime, the necessary memory is allocated
- * when the extended error reporting is enabled for a device (by
- * dasd_eer_probe). There is one private eer data structure for each eer
- * enabled DASD device. It contains memory for the work_struct, one SNSS cqr
- * and a flags field that is used to coordinate the use of the cqr. The call
- * to write a state change trigger can come in at any time, so we have one flag
- * CQR_IN_USE that protects the cqr itself. When this flag indicates that the
- * cqr is currently in use, dasd_eer_sense_subsystem_status cannot start a
- * second request but sets the SNSS_REQUESTED flag instead.
- *
- * When the request is finished, the callback function dasd_eer_SNSS_cb
- * is called. This function will invoke the function
- * dasd_eer_write_SNSS_trigger to finally write the trigger. It will also
- * check the SNSS_REQUESTED flag and if it is set it will call
- * dasd_eer_sense_subsystem_status again.
- *
- * To avoid race conditions during the handling of the lock, the flags must
- * be protected by the snsslock.
- */
-
-struct dasd_eer_private {
- struct dasd_ccw_req *cqr;
- unsigned long flags;
- struct work_struct worker;
-};
-
-static void dasd_eer_destroy(struct dasd_device *device,
- struct dasd_eer_private *eer);
-static int
-dasd_eer_write_trigger(struct dasd_eer_trigger *trigger);
-static void dasd_eer_sense_subsystem_status(void *data);
-static int dasd_eer_notify(struct notifier_block *self,
- unsigned long action, void *data);
-
-struct workqueue_struct *dasd_eer_workqueue;
-
-#define SNSS_DATA_SIZE 44
-static spinlock_t snsslock = SPIN_LOCK_UNLOCKED;
-
-#define DASD_EER_BUSID_SIZE 10
-struct dasd_eer_header {
- __u32 total_size;
- __u32 trigger;
- __u64 tv_sec;
- __u64 tv_usec;
- char busid[DASD_EER_BUSID_SIZE];
-} __attribute__ ((packed));
-
-static struct notifier_block dasd_eer_nb = {
- .notifier_call = dasd_eer_notify,
-};
-
-/*
- * flags for use with dasd_eer_private
- */
-#define CQR_IN_USE 0
-#define SNSS_REQUESTED 1
-
-/*
- * This function checks if extended error reporting is available for a given
- * dasd_device. If yes, then it creates and returns a struct dasd_eer,
- * otherwise it returns an -EPERM error pointer.
- */
-struct dasd_eer_private *
-dasd_eer_probe(struct dasd_device *device)
-{
- struct dasd_eer_private *private;
-
- if (!(device && device->discipline
- && !strcmp(device->discipline->name, "ECKD"))) {
- return ERR_PTR(-EPERM);
- }
- /* allocate the private data structure */
- private = (struct dasd_eer_private *)kmalloc(
- sizeof(struct dasd_eer_private), GFP_KERNEL);
- if (!private) {
- return ERR_PTR(-ENOMEM);
- }
- INIT_WORK(&private->worker, dasd_eer_sense_subsystem_status,
- (void *)device);
- private->cqr = dasd_kmalloc_request("ECKD",
- 1 /* SNSS */ ,
- SNSS_DATA_SIZE ,
- device);
- if (!private->cqr) {
- kfree(private);
- return ERR_PTR(-ENOMEM);
- }
- private->flags = 0;
- return private;
-};
-
-/*
- * If our private SNSS request is queued, remove it from the
- * dasd ccw queue so we can free the requests memory.
- */
-static void
-dasd_eer_dequeue_SNSS_request(struct dasd_device *device,
- struct dasd_eer_private *eer)
-{
- struct list_head *lst, *nxt;
- struct dasd_ccw_req *cqr, *erpcqr;
- dasd_erp_fn_t erp_fn;
-
- spin_lock_irq(get_ccwdev_lock(device->cdev));
- list_for_each_safe(lst, nxt, &device->ccw_queue) {
- cqr = list_entry(lst, struct dasd_ccw_req, list);
- /* we are looking for two kinds or requests */
- /* first kind: our SNSS request: */
- if (cqr == eer->cqr) {
- if (cqr->status == DASD_CQR_IN_IO)
- device->discipline->term_IO(cqr);
- list_del(&cqr->list);
- break;
- }
- /* second kind: ERP requests for our SNSS request */
- if (cqr->refers) {
- /* If this erp request chain ends in our cqr, then */
- /* cal the erp_postaction to clean it up */
- erpcqr = cqr;
- while (erpcqr->refers) {
- erpcqr = erpcqr->refers;
- }
- if (erpcqr == eer->cqr) {
- erp_fn = device->discipline->erp_postaction(
- cqr);
- erp_fn(cqr);
- }
- continue;
- }
- }
- spin_unlock_irq(get_ccwdev_lock(device->cdev));
-}
-
-/*
- * This function dismantles a struct dasd_eer that was created by
- * dasd_eer_probe. Since we want to free our private data structure,
- * we must make sure that the memory is not in use anymore.
- * We have to flush the work queue and remove a possible SNSS request
- * from the dasd queue.
- */
-static void
-dasd_eer_destroy(struct dasd_device *device, struct dasd_eer_private *eer)
-{
- flush_workqueue(dasd_eer_workqueue);
- dasd_eer_dequeue_SNSS_request(device, eer);
- dasd_kfree_request(eer->cqr, device);
- kfree(eer);
-};
-
-/*
- * enable the extended error reporting for a particular device
- */
-static int
-dasd_eer_enable_on_device(struct dasd_device *device)
-{
- void *eer;
- if (!device)
- return -ENODEV;
- if (device->eer)
- return 0;
- if (!try_module_get(THIS_MODULE)) {
- return -EINVAL;
- }
- eer = (void *)dasd_eer_probe(device);
- if (IS_ERR(eer)) {
- module_put(THIS_MODULE);
- return PTR_ERR(eer);
- }
- device->eer = eer;
- return 0;
-}
-
-/*
- * enable the extended error reporting for a particular device
- */
-static int
-dasd_eer_disable_on_device(struct dasd_device *device)
-{
- struct dasd_eer_private *eer = device->eer;
-
- if (!device)
- return -ENODEV;
- if (!device->eer)
- return 0;
- device->eer = NULL;
- dasd_eer_destroy(device,eer);
- module_put(THIS_MODULE);
-
- return 0;
-}
-
-/*
- * Set extended error reporting (eer)
- * Note: This will be registered as a DASD ioctl, to be called on DASD devices.
- */
-static int
-dasd_ioctl_set_eer(struct block_device *bdev, int no, long args)
-{
- struct dasd_device *device;
- int intval;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- if (bdev != bdev->bd_contains)
- /* Error-reporting is not allowed for partitions */
- return -EINVAL;
- if (get_user(intval, (int __user *) args))
- return -EFAULT;
- device = bdev->bd_disk->private_data;
- if (device == NULL)
- return -ENODEV;
-
- intval = (intval != 0);
- DEV_MESSAGE (KERN_DEBUG, device,
- "set eer on device to %d", intval);
- if (intval)
- return dasd_eer_enable_on_device(device);
- else
- return dasd_eer_disable_on_device(device);
-}
-
-/*
- * Get value of extended error reporting.
- * Note: This will be registered as a DASD ioctl, to be called on DASD devices.
- */
-static int
-dasd_ioctl_get_eer(struct block_device *bdev, int no, long args)
-{
- struct dasd_device *device;
-
- device = bdev->bd_disk->private_data;
- if (device == NULL)
- return -ENODEV;
- return put_user((device->eer != NULL), (int __user *) args);
-}
-
-/*
- * The following function can be used for those triggers that have
- * all necessary data available when the function is called.
- * If the parameter cqr is not NULL, the chain of requests will be searched
- * for valid sense data, and all valid sense data sets will be added to
- * the triggers data.
- */
-static int
-dasd_eer_write_standard_trigger(int trigger, struct dasd_device *device,
- struct dasd_ccw_req *cqr)
-{
- struct dasd_ccw_req *temp_cqr;
- int data_size;
- struct timeval tv;
- struct dasd_eer_header header;
- unsigned long flags;
- struct eerbuffer *eerb;
-
- /* go through cqr chain and count the valid sense data sets */
- temp_cqr = cqr;
- data_size = 0;
- while (temp_cqr) {
- if (temp_cqr->irb.esw.esw0.erw.cons)
- data_size += 32;
- temp_cqr = temp_cqr->refers;
- }
-
- header.total_size = sizeof(header) + data_size + 4; /* "EOR" */
- header.trigger = trigger;
- do_gettimeofday(&tv);
- header.tv_sec = tv.tv_sec;
- header.tv_usec = tv.tv_usec;
- strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE);
-
- spin_lock_irqsave(&bufferlock, flags);
- list_for_each_entry(eerb, &bufferlist, list) {
- dasd_eer_start_record(eerb, header.total_size);
- dasd_eer_write_buffer(eerb, sizeof(header), (char*)(&header));
- temp_cqr = cqr;
- while (temp_cqr) {
- if (temp_cqr->irb.esw.esw0.erw.cons)
- dasd_eer_write_buffer(eerb, 32, cqr->irb.ecw);
- temp_cqr = temp_cqr->refers;
- }
- dasd_eer_write_buffer(eerb, 4,"EOR");
- }
- spin_unlock_irqrestore(&bufferlock, flags);
-
- wake_up_interruptible(&dasd_eer_read_wait_queue);
-
- return 0;
-}
-
-/*
- * This function writes a DASD_EER_STATECHANGE trigger.
- */
-static void
-dasd_eer_write_SNSS_trigger(struct dasd_device *device,
- struct dasd_ccw_req *cqr)
-{
- int data_size;
- int snss_rc;
- struct timeval tv;
- struct dasd_eer_header header;
- unsigned long flags;
- struct eerbuffer *eerb;
-
- snss_rc = (cqr->status == DASD_CQR_FAILED) ? -EIO : 0;
- if (snss_rc)
- data_size = 0;
- else
- data_size = SNSS_DATA_SIZE;
-
- header.total_size = sizeof(header) + data_size + 4; /* "EOR" */
- header.trigger = DASD_EER_STATECHANGE;
- do_gettimeofday(&tv);
- header.tv_sec = tv.tv_sec;
- header.tv_usec = tv.tv_usec;
- strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE);
-
- spin_lock_irqsave(&bufferlock, flags);
- list_for_each_entry(eerb, &bufferlist, list) {
- dasd_eer_start_record(eerb, header.total_size);
- dasd_eer_write_buffer(eerb, sizeof(header),(char*)(&header));
- if (!snss_rc)
- dasd_eer_write_buffer(eerb, SNSS_DATA_SIZE, cqr->data);
- dasd_eer_write_buffer(eerb, 4,"EOR");
- }
- spin_unlock_irqrestore(&bufferlock, flags);
-
- wake_up_interruptible(&dasd_eer_read_wait_queue);
-}
-
-/*
- * callback function for use with SNSS request
- */
-static void
-dasd_eer_SNSS_cb(struct dasd_ccw_req *cqr, void *data)
-{
- struct dasd_device *device;
- struct dasd_eer_private *private;
- unsigned long irqflags;
-
- device = (struct dasd_device *)data;
- private = (struct dasd_eer_private *)device->eer;
- dasd_eer_write_SNSS_trigger(device, cqr);
- spin_lock_irqsave(&snsslock, irqflags);
- if(!test_and_clear_bit(SNSS_REQUESTED, &private->flags)) {
- clear_bit(CQR_IN_USE, &private->flags);
- spin_unlock_irqrestore(&snsslock, irqflags);
- return;
- };
- clear_bit(CQR_IN_USE, &private->flags);
- spin_unlock_irqrestore(&snsslock, irqflags);
- dasd_eer_sense_subsystem_status(device);
- return;
-}
-
-/*
- * clean a used cqr before using it again
- */
-static void
-dasd_eer_clean_SNSS_request(struct dasd_ccw_req *cqr)
-{
- struct ccw1 *cpaddr = cqr->cpaddr;
- void *data = cqr->data;
-
- memset(cqr, 0, sizeof(struct dasd_ccw_req));
- memset(cpaddr, 0, sizeof(struct ccw1));
- memset(data, 0, SNSS_DATA_SIZE);
- cqr->cpaddr = cpaddr;
- cqr->data = data;
- strncpy((char *) &cqr->magic, "ECKD", 4);
- ASCEBC((char *) &cqr->magic, 4);
- set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
-}
-
-/*
- * build and start an SNSS request
- * This function is called from a work queue so we have to
- * pass the dasd_device pointer as a void pointer.
- */
-static void
-dasd_eer_sense_subsystem_status(void *data)
-{
- struct dasd_device *device;
- struct dasd_eer_private *private;
- struct dasd_ccw_req *cqr;
- struct ccw1 *ccw;
- unsigned long irqflags;
-
- device = (struct dasd_device *)data;
- private = (struct dasd_eer_private *)device->eer;
- if (!private) /* device not eer enabled any more */
- return;
- cqr = private->cqr;
- spin_lock_irqsave(&snsslock, irqflags);
- if(test_and_set_bit(CQR_IN_USE, &private->flags)) {
- set_bit(SNSS_REQUESTED, &private->flags);
- spin_unlock_irqrestore(&snsslock, irqflags);
- return;
- };
- spin_unlock_irqrestore(&snsslock, irqflags);
- dasd_eer_clean_SNSS_request(cqr);
- cqr->device = device;
- cqr->retries = 255;
- cqr->expires = 10 * HZ;
-
- ccw = cqr->cpaddr;
- ccw->cmd_code = DASD_ECKD_CCW_SNSS;
- ccw->count = SNSS_DATA_SIZE;
- ccw->flags = 0;
- ccw->cda = (__u32)(addr_t)cqr->data;
-
- cqr->buildclk = get_clock();
- cqr->status = DASD_CQR_FILLED;
- cqr->callback = dasd_eer_SNSS_cb;
- cqr->callback_data = (void *)device;
- dasd_add_request_head(cqr);
-
- return;
-}
-
-/*
- * This function is called for all triggers. It calls the appropriate
- * function that writes the actual trigger records.
- */
-static int
-dasd_eer_write_trigger(struct dasd_eer_trigger *trigger)
-{
- int rc;
- struct dasd_eer_private *private = trigger->device->eer;
-
- switch (trigger->id) {
- case DASD_EER_FATALERROR:
- case DASD_EER_PPRCSUSPEND:
- rc = dasd_eer_write_standard_trigger(
- trigger->id, trigger->device, trigger->cqr);
- break;
- case DASD_EER_NOPATH:
- rc = dasd_eer_write_standard_trigger(
- trigger->id, trigger->device, NULL);
- break;
- case DASD_EER_STATECHANGE:
- if (queue_work(dasd_eer_workqueue, &private->worker)) {
- rc=0;
- } else {
- /* If the work_struct was already queued, it can't
- * be queued again. But this is OK since we don't
- * need to have it queued twice.
- */
- rc = -EBUSY;
- }
- break;
- default: /* unknown trigger, so we write it without any sense data */
- rc = dasd_eer_write_standard_trigger(
- trigger->id, trigger->device, NULL);
- break;
- }
- return rc;
-}
-
-/*
- * This function is registered with the dasd device driver and gets called
- * for all dasd eer notifications.
- */
-static int dasd_eer_notify(struct notifier_block *self,
- unsigned long action, void *data)
-{
- switch (action) {
- case DASD_EER_DISABLE:
- dasd_eer_disable_on_device((struct dasd_device *)data);
- break;
- case DASD_EER_TRIGGER:
- dasd_eer_write_trigger((struct dasd_eer_trigger *)data);
- break;
- }
- return NOTIFY_OK;
-}
-
-
-/*****************************************************************************/
-/* the device operations */
-/*****************************************************************************/
-
-/*
- * On the one side we need a lock to access our internal buffer, on the
- * other side a copy_to_user can sleep. So we need to copy the data we have
- * to transfer in a readbuffer, which is protected by the readbuffer_mutex.
- */
-static char readbuffer[PAGE_SIZE];
-DECLARE_MUTEX(readbuffer_mutex);
-
-
-static int
-dasd_eer_open(struct inode *inp, struct file *filp)
-{
- struct eerbuffer *eerb;
- unsigned long flags;
-
- eerb = kmalloc(sizeof(struct eerbuffer), GFP_KERNEL);
- eerb->head = 0;
- eerb->tail = 0;
- eerb->residual = 0;
- eerb->buffer_page_count = 1;
- eerb->buffersize = eerb->buffer_page_count * PAGE_SIZE;
- eerb->buffer = kmalloc(eerb->buffer_page_count*sizeof(char*),
- GFP_KERNEL);
- if (!eerb->buffer)
- return -ENOMEM;
- if (dasd_eer_allocate_buffer_pages(eerb->buffer,
- eerb->buffer_page_count)) {
- kfree(eerb->buffer);
- return -ENOMEM;
- }
- filp->private_data = eerb;
- spin_lock_irqsave(&bufferlock, flags);
- list_add(&eerb->list, &bufferlist);
- spin_unlock_irqrestore(&bufferlock, flags);
-
- return nonseekable_open(inp,filp);
-}
-
-static int
-dasd_eer_close(struct inode *inp, struct file *filp)
-{
- struct eerbuffer *eerb;
- unsigned long flags;
-
- eerb = (struct eerbuffer *)filp->private_data;
- spin_lock_irqsave(&bufferlock, flags);
- list_del(&eerb->list);
- spin_unlock_irqrestore(&bufferlock, flags);
- dasd_eer_free_buffer_pages(eerb->buffer, eerb->buffer_page_count);
- kfree(eerb->buffer);
- kfree(eerb);
-
- return 0;
-}
-
-static long
-dasd_eer_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- int intval;
- struct eerbuffer *eerb;
-
- eerb = (struct eerbuffer *)filp->private_data;
- switch (cmd) {
- case DASD_EER_PURGE:
- dasd_eer_purge_buffer(eerb);
- return 0;
- case DASD_EER_SETBUFSIZE:
- if (get_user(intval, (int __user *)arg))
- return -EFAULT;
- return dasd_eer_resize_buffer(eerb, intval);
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-static ssize_t
-dasd_eer_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
-{
- int tc,rc;
- int tailcount,effective_count;
- unsigned long flags;
- struct eerbuffer *eerb;
-
- eerb = (struct eerbuffer *)filp->private_data;
- if(down_interruptible(&readbuffer_mutex))
- return -ERESTARTSYS;
-
- spin_lock_irqsave(&bufferlock, flags);
-
- if (eerb->residual < 0) { /* the remainder of this record */
- /* has been deleted */
- eerb->residual = 0;
- spin_unlock_irqrestore(&bufferlock, flags);
- up(&readbuffer_mutex);
- return -EIO;
- } else if (eerb->residual > 0) {
- /* OK we still have a second half of a record to deliver */
- effective_count = min(eerb->residual, (int)count);
- eerb->residual -= effective_count;
- } else {
- tc = 0;
- while (!tc) {
- tc = dasd_eer_read_buffer(eerb,
- sizeof(tailcount), (char*)(&tailcount));
- if (!tc) {
- /* no data available */
- spin_unlock_irqrestore(&bufferlock, flags);
- up(&readbuffer_mutex);
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- rc = wait_event_interruptible(
- dasd_eer_read_wait_queue,
- eerb->head != eerb->tail);
- if (rc) {
- return rc;
- }
- if(down_interruptible(&readbuffer_mutex))
- return -ERESTARTSYS;
- spin_lock_irqsave(&bufferlock, flags);
- }
- }
- WARN_ON(tc != sizeof(tailcount));
- effective_count = min(tailcount,(int)count);
- eerb->residual = tailcount - effective_count;
- }
-
- tc = dasd_eer_read_buffer(eerb, effective_count, readbuffer);
- WARN_ON(tc != effective_count);
-
- spin_unlock_irqrestore(&bufferlock, flags);
-
- if (copy_to_user(buf, readbuffer, effective_count)) {
- up(&readbuffer_mutex);
- return -EFAULT;
- }
-
- up(&readbuffer_mutex);
- return effective_count;
-}
-
-static unsigned int
-dasd_eer_poll (struct file *filp, poll_table *ptable)
-{
- unsigned int mask;
- unsigned long flags;
- struct eerbuffer *eerb;
-
- eerb = (struct eerbuffer *)filp->private_data;
- poll_wait(filp, &dasd_eer_read_wait_queue, ptable);
- spin_lock_irqsave(&bufferlock, flags);
- if (eerb->head != eerb->tail)
- mask = POLLIN | POLLRDNORM ;
- else
- mask = 0;
- spin_unlock_irqrestore(&bufferlock, flags);
- return mask;
-}
-
-static struct file_operations dasd_eer_fops = {
- .open = &dasd_eer_open,
- .release = &dasd_eer_close,
- .unlocked_ioctl = &dasd_eer_ioctl,
- .compat_ioctl = &dasd_eer_ioctl,
- .read = &dasd_eer_read,
- .poll = &dasd_eer_poll,
- .owner = THIS_MODULE,
-};
-
-static struct miscdevice dasd_eer_dev = {
- .minor = MISC_DYNAMIC_MINOR,
- .name = "dasd_eer",
- .fops = &dasd_eer_fops,
-};
-
-
-/*****************************************************************************/
-/* Init and exit */
-/*****************************************************************************/
-
-static int
-__init dasd_eer_init(void)
-{
- int rc;
-
- dasd_eer_workqueue = create_singlethread_workqueue("dasd_eer");
- if (!dasd_eer_workqueue) {
- MESSAGE(KERN_ERR , "%s", "dasd_eer_init could not "
- "create workqueue \n");
- rc = -ENOMEM;
- goto out;
- }
-
- rc = dasd_register_eer_notifier(&dasd_eer_nb);
- if (rc) {
- MESSAGE(KERN_ERR, "%s", "dasd_eer_init could not "
- "register error reporting");
- goto queue;
- }
-
- dasd_ioctl_no_register(THIS_MODULE, BIODASDEERSET, dasd_ioctl_set_eer);
- dasd_ioctl_no_register(THIS_MODULE, BIODASDEERGET, dasd_ioctl_get_eer);
-
- /* we don't need our own character device,
- * so we just register as misc device */
- rc = misc_register(&dasd_eer_dev);
- if (rc) {
- MESSAGE(KERN_ERR, "%s", "dasd_eer_init could not "
- "register misc device");
- goto unregister;
- }
-
- return 0;
-
-unregister:
- dasd_unregister_eer_notifier(&dasd_eer_nb);
- dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERSET,
- dasd_ioctl_set_eer);
- dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERGET,
- dasd_ioctl_get_eer);
-queue:
- destroy_workqueue(dasd_eer_workqueue);
-out:
- return rc;
-
-}
-module_init(dasd_eer_init);
-
-static void
-__exit dasd_eer_exit(void)
-{
- dasd_unregister_eer_notifier(&dasd_eer_nb);
- dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERSET,
- dasd_ioctl_set_eer);
- dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERGET,
- dasd_ioctl_get_eer);
- destroy_workqueue(dasd_eer_workqueue);
-
- WARN_ON(misc_deregister(&dasd_eer_dev) != 0);
-}
-module_exit(dasd_eer_exit);
extern struct dasd_discipline *dasd_diag_discipline_pointer;
-
-/*
- * Notification numbers for extended error reporting notifications:
- * The DASD_EER_DISABLE notification is sent before a dasd_device (and it's
- * eer pointer) is freed. The error reporting module needs to do all necessary
- * cleanup steps.
- * The DASD_EER_TRIGGER notification sends the actual error reports (triggers).
- */
-#define DASD_EER_DISABLE 0
-#define DASD_EER_TRIGGER 1
-
-/* Trigger IDs for extended error reporting DASD_EER_TRIGGER notification */
-#define DASD_EER_FATALERROR 1
-#define DASD_EER_NOPATH 2
-#define DASD_EER_STATECHANGE 3
-#define DASD_EER_PPRCSUSPEND 4
-
-/*
- * The dasd_eer_trigger structure contains all data that we need to send
- * along with an DASD_EER_TRIGGER notification.
- */
-struct dasd_eer_trigger {
- unsigned int id;
- struct dasd_device *device;
- struct dasd_ccw_req *cqr;
-};
-
-
struct dasd_device {
/* Block device stuff. */
struct gendisk *gdp;
unsigned long flags; /* per device flags */
unsigned short features; /* copy of devmap-features (read-only!) */
- /* extended error reporting stuff (eer) */
- void *eer;
-
/* Device discipline stuff. */
struct dasd_discipline *discipline;
+ struct dasd_discipline *base_discipline;
char *private;
/* Device state and target state. */
int dasd_generic_set_offline (struct ccw_device *cdev);
int dasd_generic_notify(struct ccw_device *, int);
void dasd_generic_auto_online (struct ccw_driver *);
-int dasd_register_eer_notifier(struct notifier_block *);
-int dasd_unregister_eer_notifier(struct notifier_block *);
-void dasd_write_eer_trigger(unsigned int , struct dasd_device *,
- struct dasd_ccw_req *);
-
-
/* externals in dasd_devmap.c */
extern int dasd_max_devindex;
q_no = q->q_no;
if(!q->is_input_q)
q_no += irq->no_input_qs;
+again:
ccq = do_eqbs(irq->sch_token, state, q_no, start, cnt);
rc = qdio_check_ccq(q, ccq);
+ if (rc == 1) {
+ QDIO_DBF_TEXT5(1,trace,"eqAGAIN");
+ goto again;
+ }
if (rc < 0) {
QDIO_DBF_TEXT2(1,trace,"eqberr");
sprintf(dbf_text,"%2x,%2x,%d,%d",tmp_cnt, *cnt, ccq, q_no);
q_no = q->q_no;
if(!q->is_input_q)
q_no += irq->no_input_qs;
+again:
ccq = do_sqbs(irq->sch_token, state, q_no, start, cnt);
rc = qdio_check_ccq(q, ccq);
+ if (rc == 1) {
+ QDIO_DBF_TEXT5(1,trace,"sqAGAIN");
+ goto again;
+ }
if (rc < 0) {
QDIO_DBF_TEXT3(1,trace,"sqberr");
sprintf(dbf_text,"%2x,%2x,%d,%d",tmp_cnt,*cnt,ccq,q_no);
if (!no_used)
return 1;
-
- if (!q->siga_sync)
+ if (!q->siga_sync && !irq->is_qebsm)
/* we'll check for more primed buffers in qeth_stop_polling */
return 0;
if (irq->is_qebsm) {
{
struct esp *esp = (struct esp *) SCptr->device->host->hostdata;
+ spin_lock_irq(esp->ehost->host_lock);
(void) esp_do_resetbus(esp);
-
spin_unlock_irq(esp->ehost->host_lock);
wait_event(esp->reset_queue, (esp->resetting_bus == 0));
- spin_lock_irq(esp->ehost->host_lock);
-
return SUCCESS;
}
#define DRV_VERSION "0.9"
enum {
+ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
SIL_FLAG_MOD15WRITE = (1 << 30),
sil_3112 = 0,
sil_3112_m15w = 1,
- sil_3114 = 2,
+ sil_3512 = 2,
+ sil_3114 = 3,
SIL_FIFO_R0 = 0x40,
SIL_FIFO_W0 = 0x41,
static const struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */
+ },
+ /* sil_3112_15w - keep it sync'd w/ sil_3112 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3114 */
+ },
+ /* sil_3512 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO,
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3114 */
+ {
+ .sht = &sil_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
+ unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
- { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
- { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
- { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
+ { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc },
+ { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c },
+ { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
dev_printk(KERN_WARNING, &pdev->dev,
"cache line size not set. Driver may not function\n");
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
+
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;
#define SD_MAX_RETRIES 5
#define SD_PASSTHROUGH_RETRIES 1
+/*
+ * Size of the initial data buffer for mode and read capacity data
+ */
+#define SD_BUF_SIZE 512
+
static void scsi_disk_release(struct kref *kref);
struct scsi_disk {
/*
* read write protect setting, if possible - called only in sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
/*
* sd_read_cache_type - called only from sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
/* Take headers and block descriptors into account */
len += data.header_length + data.block_descriptor_length;
+ if (len > SD_BUF_SIZE)
+ goto bad_sense;
/* Get the data */
res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
int ct = 0;
int offset = data.header_length + data.block_descriptor_length;
+ if (offset >= SD_BUF_SIZE - 2) {
+ printk(KERN_ERR "%s: malformed MODE SENSE response",
+ diskname);
+ goto defaults;
+ }
+
if ((buffer[offset] & 0x3f) != modepage) {
printk(KERN_ERR "%s: got wrong page\n", diskname);
goto defaults;
diskname);
sdkp->WCE = 0;
sdkp->RCD = 0;
+ sdkp->DPOFUA = 0;
}
/**
if (!scsi_device_online(sdp))
goto out;
- buffer = kmalloc(512, GFP_KERNEL | __GFP_DMA);
+ buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA);
if (!buffer) {
printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation "
"failure.\n");
.cons = SERIAL8250_CONSOLE,
};
+/*
+ * early_serial_setup - early registration for 8250 ports
+ *
+ * Setup an 8250 port structure prior to console initialisation. Use
+ * after console initialisation will cause undefined behaviour.
+ */
int __init early_serial_setup(struct uart_port *port)
{
if (port->line >= ARRAY_SIZE(serial8250_ports))
int value;
struct spi_driver *drv = to_spi_driver(dev->driver);
- if (!drv->suspend)
+ if (!drv || !drv->suspend)
return 0;
/* suspend will stop irqs and dma; no more i/o */
int value;
struct spi_driver *drv = to_spi_driver(dev->driver);
- if (!drv->resume)
+ if (!drv || !drv->resume)
return 0;
/* resume may restart the i/o queue */
{
(void) device_for_each_child(master->cdev.dev, NULL, __unregister);
class_device_unregister(&master->cdev);
- master->cdev.dev = NULL;
}
EXPORT_SYMBOL_GPL(spi_unregister_master);
config FB_GBE_MEM
int "Video memory size in MB"
depends on FB_GBE
- default 8
+ default 4
help
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
writeb(green, mmio_base + 0x791);
writeb(blue, mmio_base + 0x791);
- switch(p->var.bits_per_pixel) {
- case 15:
- if (regno < 16) {
+ if (regno < 16) {
+ switch(p->var.red.offset) {
+ case 10: /* RGB 555 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 7) |
((green & 0xf8) << 2) |
((blue & 0xf8) >> 3);
- }
- break;
- case 16:
- if (regno < 16) {
+ break;
+ case 11: /* RGB 565 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 8) |
((green & 0xfc) << 3) |
((blue & 0xf8) >> 3);
- }
- break;
- case 24:
- if (regno < 24) {
+ break;
+ case 16: /* RGB 888 */
((u32 *)(p->pseudo_palette))[regno] =
(red << 16) |
(green << 8) |
(blue);
+ break;
}
- break;
}
+
return 0;
}
mdelay( 15);
}
-#ifdef CONFIG_PPC_OF
-
static void radeon_pm_reset_pad_ctlr_strength(struct radeonfb_info *rinfo)
{
u32 tmp, tmp2;
radeon_pm_m10_enable_lvds_spread_spectrum(rinfo);
}
+#ifdef CONFIG_PPC_OF
+
static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo)
{
OUTREG(MC_CNTL, rinfo->save_regs[46]);
printk("radeonfb: Dynamic Clock Power Management disabled\n");
}
+#if defined(CONFIG_PM)
/* Check if we can power manage on suspend/resume. We can do
* D2 on M6, M7 and M9, and we can resume from D3 cold a few other
* "Mac" cards, but that's all. We need more infos about what the
* BIOS does tho. Right now, all this PM stuff is pmac-only for that
* reason. --BenH
*/
-#if defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC)
+ /* Special case for Samsung P35 laptops
+ */
+ if ((rinfo->pdev->vendor == PCI_VENDOR_ID_ATI) &&
+ (rinfo->pdev->device == PCI_CHIP_RV350_NP) &&
+ (rinfo->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) &&
+ (rinfo->pdev->subsystem_device == 0xc00c)) {
+ rinfo->reinit_func = radeon_reinitialize_M10;
+ rinfo->pm_mode |= radeon_pm_off;
+ }
+#if defined(CONFIG_PPC_PMAC)
if (_machine == _MACH_Pmac && rinfo->of_node) {
if (rinfo->is_mobility && rinfo->pm_reg &&
rinfo->family <= CHIP_FAMILY_RV250)
OUTREG(TV_DAC_CNTL, INREG(TV_DAC_CNTL) | 0x07000000);
#endif
}
-#endif /* defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) */
+#endif /* defined(CONFIG_PPC_PMAC) */
+#endif /* defined(CONFIG_PM) */
}
void radeonfb_pm_exit(struct radeonfb_info *rinfo)
#include <linux/interrupt.h>
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
vma->vm_flags |= VM_IO;
- if (io_remap_page_range(vma, vma->vm_start, off,
+ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
vma->vm_page_prot)) {
return -EAGAIN;
{
unsigned long flags;
unsigned int scanlines = height * c->vc_font.height;
- u8 scanlines_lo, r7, vsync_end, mode, max_scan;
+ u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;
spin_lock_irqsave(&vga_lock, flags);
- outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
- max_scan = inb_p(vga_video_port_val);
-
- if (max_scan & 0x80)
- scanlines <<= 1;
-
vgacon_xres = width * VGA_FONTWIDTH;
vgacon_yres = height * c->vc_font.height;
- outb_p(VGA_CRTC_MODE, vga_video_port_reg);
- mode = inb_p(vga_video_port_val);
+ if (vga_video_type >= VIDEO_TYPE_VGAC) {
+ outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
+ max_scan = inb_p(vga_video_port_val);
- if (mode & 0x04)
- scanlines >>= 1;
+ if (max_scan & 0x80)
+ scanlines <<= 1;
- scanlines -= 1;
- scanlines_lo = scanlines & 0xff;
+ outb_p(VGA_CRTC_MODE, vga_video_port_reg);
+ mode = inb_p(vga_video_port_val);
- outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
- r7 = inb_p(vga_video_port_val) & ~0x42;
+ if (mode & 0x04)
+ scanlines >>= 1;
- if (scanlines & 0x100)
- r7 |= 0x02;
- if (scanlines & 0x200)
- r7 |= 0x40;
+ scanlines -= 1;
+ scanlines_lo = scanlines & 0xff;
- /* deprotect registers */
- outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
- vsync_end = inb_p(vga_video_port_val);
- outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
- outb_p(vsync_end & ~0x80, vga_video_port_val);
+ outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
+ r7 = inb_p(vga_video_port_val) & ~0x42;
+
+ if (scanlines & 0x100)
+ r7 |= 0x02;
+ if (scanlines & 0x200)
+ r7 |= 0x40;
+
+ /* deprotect registers */
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ vsync_end = inb_p(vga_video_port_val);
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ outb_p(vsync_end & ~0x80, vga_video_port_val);
+ }
outb_p(VGA_CRTC_H_DISP, vga_video_port_reg);
outb_p(width - 1, vga_video_port_val);
outb_p(VGA_CRTC_OFFSET, vga_video_port_reg);
outb_p(width >> 1, vga_video_port_val);
- outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
- outb_p(scanlines_lo, vga_video_port_val);
- outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
- outb_p(r7,vga_video_port_val);
+ if (vga_video_type >= VIDEO_TYPE_VGAC) {
+ outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
+ outb_p(scanlines_lo, vga_video_port_val);
+ outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
+ outb_p(r7,vga_video_port_val);
- /* reprotect registers */
- outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
- outb_p(vsync_end, vga_video_port_val);
+ /* reprotect registers */
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ outb_p(vsync_end, vga_video_port_val);
+ }
spin_unlock_irqrestore(&vga_lock, flags);
-
return 0;
}
switch (bytesPerPixel) {
case 1:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8);
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
case 2:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5);
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 4:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8);
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
}
SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH);
{Opt_afid, "afid=%u"},
{Opt_rfdno, "rfdno=%u"},
{Opt_wfdno, "wfdno=%u"},
- {Opt_debug, "debug=%u"},
+ {Opt_debug, "debug=%x"},
{Opt_name, "name=%s"},
{Opt_remotename, "aname=%s"},
{Opt_unix, "proto=unix"},
kfree(elf_interpreter);
} else {
elf_entry = loc->elf_ex.e_entry;
+ if (BAD_ADDR(elf_entry)) {
+ send_sig(SIGSEGV, current, 0);
+ retval = -ENOEXEC; /* Nobody gets to see this, but.. */
+ goto out_free_dentry;
+ }
}
kfree(elf_phdata);
cifs_small_buf_release(iov[0].iov_base);
else if(resp_buf_type == CIFS_LARGE_BUFFER)
cifs_buf_release(iov[0].iov_base);
- } else /* return buffer to caller to free */ /* BB FIXME how do we tell caller if it is not a large buffer */ {
- *buf = iov[0].iov_base;
+ } else if(resp_buf_type != CIFS_NO_BUFFER) {
+ /* return buffer to caller to free */
+ *buf = iov[0].iov_base;
if(resp_buf_type == CIFS_SMALL_BUFFER)
*pbuf_type = CIFS_SMALL_BUFFER;
else if(resp_buf_type == CIFS_LARGE_BUFFER)
*pbuf_type = CIFS_LARGE_BUFFER;
- }
+ } /* else no valid buffer on return - leave as null */
/* Note: On -EAGAIN error only caller can retry on handle based calls
since file handle passed in no longer valid */
conjunction with 52K kvec constraint on arch with 4K
page size */
- if(cifs_sb->rsize < PAGE_CACHE_SIZE) {
- cifs_sb->rsize = PAGE_CACHE_SIZE;
- /* Windows ME does this */
- cFYI(1,("Attempt to set readsize for mount to less than one page (4096)"));
+ if(cifs_sb->rsize < 2048) {
+ cifs_sb->rsize = 2048;
+ /* Windows ME may prefer this */
+ cFYI(1,("readsize set to minimum 2048"));
}
cifs_sb->mnt_uid = volume_info.linux_uid;
cifs_sb->mnt_gid = volume_info.linux_gid;
val32 = kval;
return put_user(val32, (unsigned int __user *)arg);
case RTC_IRQP_SET32:
+ return sys_ioctl(fd, RTC_IRQP_SET, arg);
case RTC_EPOCH_SET32:
- ret = get_user(val32, (unsigned int __user *)arg);
- if (ret)
- return ret;
- kval = val32;
-
- set_fs(KERNEL_DS);
- ret = sys_ioctl(fd, (cmd == RTC_IRQP_SET32) ?
- RTC_IRQP_SET : RTC_EPOCH_SET,
- (unsigned long)&kval);
- set_fs(oldfs);
- return ret;
+ return sys_ioctl(fd, RTC_EPOCH_SET, arg);
default:
/* unreached */
return -ENOIOCTLCMD;
* and other special files. --ADM
*/
asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
- int newdfd, const char __user *newname)
+ int newdfd, const char __user *newname,
+ int flags)
{
struct dentry *new_dentry;
struct nameidata nd, old_nd;
int error;
char * to;
+ if (flags != 0)
+ return -EINVAL;
+
to = getname(newname);
if (IS_ERR(to))
return PTR_ERR(to);
asmlinkage long sys_link(const char __user *oldname, const char __user *newname)
{
- return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname);
+ return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname, 0);
}
/*
ToDo/Notes:
- Find and fix bugs.
- The only places in the kernel where a file is resized are
- ntfs_file_write*() and ntfs_truncate() for both of which i_sem is
+ ntfs_file_write*() and ntfs_truncate() for both of which i_mutex is
held. Just have to be careful in read-/writepage and other helpers
- not running under i_sem that we play nice... Also need to be careful
+ not running under i_mutex that we play nice. Also need to be careful
with initialized_size extension in ntfs_file_write*() and writepage.
UPDATE: The only things that need to be checked are the compressed
write and the other attribute resize/write cases like index
- Enable the code for setting the NT4 compatibility flag when we start
making NTFS 1.2 specific modifications.
+2.1.26 - Minor bug fixes and updates.
+
+ - Fix a potential overflow in file.c where a cast to s64 was missing in
+ a left shift of a page index.
+ - The struct inode has had its i_sem semaphore changed to a mutex named
+ i_mutex.
+ - We have struct kmem_cache now so use it instead of the typedef
+ kmem_cache_t. (Pekka Enberg)
+ - Implement support for sector sizes above 512 bytes (up to the maximum
+ supported by NTFS which is 4096 bytes).
+ - Do more detailed reporting of why we cannot mount read-write by
+ special casing the VOLUME_MODIFIED_BY_CHKDSK flag.
+ - Miscellaneous updates to layout.h.
+ - Cope with attribute list attribute having invalid flags. Windows
+ copes with this and even chkdsk does not detect or fix this so we
+ have to cope with it, too. Thanks to Pawel Kot for reporting the
+ problem.
+
2.1.25 - (Almost) fully implement write(2) and truncate(2).
- Change ntfs_map_runlist_nolock(), ntfs_attr_find_vcn_nolock() and
single one of them had an mst error. (Thanks to Ken MacFerrin for
the bug report.)
- Fix error handling in fs/ntfs/quota.c::ntfs_mark_quotas_out_of_date()
- where we failed to release i_sem on the $Quota/$Q attribute inode.
+ where we failed to release i_mutex on the $Quota/$Q attribute inode.
- Fix bug in handling of bad inodes in fs/ntfs/namei.c::ntfs_lookup().
- Add mapping of unmapped buffers to all remaining code paths, i.e.
fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(),
clusters. (Philipp Thomas)
- attrib.c::load_attribute_list(): Fix bug when initialized_size is a
multiple of the block_size but not the cluster size. (Szabolcs
- Szakacsits <szaka@sienet.hu>)
+ Szakacsits)
2.1.2 - Important bug fixes aleviating the hangs in statfs.
- Add handling for initialized_size != data_size in compressed files.
- Reduce function local stack usage from 0x3d4 bytes to just noise in
- fs/ntfs/upcase.c. (Randy Dunlap <rdunlap@xenotime.net>)
+ fs/ntfs/upcase.c. (Randy Dunlap)
- Remove compiler warnings for newer gcc.
- Pages are no longer kmapped by mm/filemap.c::generic_file_write()
around calls to ->{prepare,commit}_write. Adapt NTFS appropriately
the kernel. We probably want a kernel generic init_address_space()
function...
- Drop BKL from ntfs_readdir() after consultation with Al Viro. The
- only caller of ->readdir() is vfs_readdir() which holds i_sem during
- the call, and i_sem is sufficient protection against changes in the
- directory inode (including ->i_size).
+ only caller of ->readdir() is vfs_readdir() which holds i_mutex
+ during the call, and i_mutex is sufficient protection against changes
+ in the directory inode (including ->i_size).
- Use generic_file_llseek() for directories (as opposed to
- default_llseek()) as this downs i_sem instead of the BKL which is
+ default_llseek()) as this downs i_mutex instead of the BKL which is
what we now need for exclusion against ->f_pos changes considering we
no longer take the BKL in ntfs_readdir().
index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
unistr.o upcase.o
-EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.25\"
+EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.26\"
ifeq ($(CONFIG_NTFS_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
* aops.c - NTFS kernel address space operations and page cache handling.
* Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
/* $MFT/$DATA must have its complete runlist in memory at all times. */
BUG_ON(!ni->runlist.rl && !ni->mft_no && !NInoAttr(ni));
- blocksize_bits = VFS_I(ni)->i_blkbits;
- blocksize = 1 << blocksize_bits;
+ blocksize = vol->sb->s_blocksize;
+ blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
create_empty_buffers(page, blocksize, 0);
BUG_ON(!NInoNonResident(ni));
BUG_ON(NInoMstProtected(ni));
-
- blocksize_bits = vi->i_blkbits;
- blocksize = 1 << blocksize_bits;
-
+ blocksize = vol->sb->s_blocksize;
+ blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
BUG_ON(!PageUptodate(page));
create_empty_buffers(page, blocksize,
*/
BUG_ON(!(is_mft || S_ISDIR(vi->i_mode) ||
(NInoAttr(ni) && ni->type == AT_INDEX_ALLOCATION)));
- bh_size_bits = vi->i_blkbits;
- bh_size = 1 << bh_size_bits;
+ bh_size = vol->sb->s_blocksize;
+ bh_size_bits = vol->sb->s_blocksize_bits;
max_bhs = PAGE_CACHE_SIZE / bh_size;
BUG_ON(!max_bhs);
BUG_ON(max_bhs > MAX_BUF_PER_PAGE);
BUG_ON(!PageUptodate(page));
end = ofs + ni->itype.index.block_size;
- bh_size = 1 << VFS_I(ni)->i_blkbits;
+ bh_size = VFS_I(ni)->i_sb->s_blocksize;
spin_lock(&mapping->private_lock);
if (unlikely(!page_has_buffers(page))) {
spin_unlock(&mapping->private_lock);
/*
* file.c - NTFS kernel file operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
*
* This program/include file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
* enough to make ntfs_writepage() work.
*/
write_lock_irqsave(&ni->size_lock, flags);
- ni->initialized_size = (index + 1) << PAGE_CACHE_SHIFT;
+ ni->initialized_size = (s64)(index + 1) << PAGE_CACHE_SHIFT;
if (ni->initialized_size > new_init_size)
ni->initialized_size = new_init_size;
write_unlock_irqrestore(&ni->size_lock, flags);
"index 0x%lx, nr_pages 0x%x, pos 0x%llx, bytes 0x%zx.",
vi->i_ino, ni->type, pages[0]->index, nr_pages,
(long long)pos, bytes);
- blocksize_bits = vi->i_blkbits;
- blocksize = 1 << blocksize_bits;
+ blocksize = vol->sb->s_blocksize;
+ blocksize_bits = vol->sb->s_blocksize_bits;
u = 0;
do {
struct page *page = pages[u];
vi = pages[0]->mapping->host;
ni = NTFS_I(vi);
- blocksize = 1 << vi->i_blkbits;
+ blocksize = vi->i_sb->s_blocksize;
end = pos + bytes;
u = 0;
do {
ntfs_debug("Attribute list found in inode 0x%lx.", vi->i_ino);
NInoSetAttrList(ni);
a = ctx->attr;
- if (a->flags & ATTR_IS_ENCRYPTED ||
- a->flags & ATTR_COMPRESSION_MASK ||
- a->flags & ATTR_IS_SPARSE) {
+ if (a->flags & ATTR_COMPRESSION_MASK) {
ntfs_error(vi->i_sb, "Attribute list attribute is "
- "compressed/encrypted/sparse.");
+ "compressed.");
goto unm_err_out;
}
+ if (a->flags & ATTR_IS_ENCRYPTED ||
+ a->flags & ATTR_IS_SPARSE) {
+ if (a->non_resident) {
+ ntfs_error(vi->i_sb, "Non-resident attribute "
+ "list attribute is encrypted/"
+ "sparse.");
+ goto unm_err_out;
+ }
+ ntfs_warning(vi->i_sb, "Resident attribute list "
+ "attribute in inode 0x%lx is marked "
+ "encrypted/sparse which is not true. "
+ "However, Windows allows this and "
+ "chkdsk does not detect or correct it "
+ "so we will just ignore the invalid "
+ "flags and pretend they are not set.",
+ vi->i_ino);
+ }
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);
} else /* if (!err) */ {
ATTR_LIST_ENTRY *al_entry, *next_al_entry;
u8 *al_end;
+ static const char *es = " Not allowed. $MFT is corrupt. "
+ "You should run chkdsk.";
ntfs_debug("Attribute list attribute found in $MFT.");
NInoSetAttrList(ni);
a = ctx->attr;
- if (a->flags & ATTR_IS_ENCRYPTED ||
- a->flags & ATTR_COMPRESSION_MASK ||
- a->flags & ATTR_IS_SPARSE) {
+ if (a->flags & ATTR_COMPRESSION_MASK) {
ntfs_error(sb, "Attribute list attribute is "
- "compressed/encrypted/sparse. Not "
- "allowed. $MFT is corrupt. You should "
- "run chkdsk.");
+ "compressed.%s", es);
goto put_err_out;
}
+ if (a->flags & ATTR_IS_ENCRYPTED ||
+ a->flags & ATTR_IS_SPARSE) {
+ if (a->non_resident) {
+ ntfs_error(sb, "Non-resident attribute list "
+ "attribute is encrypted/"
+ "sparse.%s", es);
+ goto put_err_out;
+ }
+ ntfs_warning(sb, "Resident attribute list attribute "
+ "in $MFT system file is marked "
+ "encrypted/sparse which is not true. "
+ "However, Windows allows this and "
+ "chkdsk does not detect or correct it "
+ "so we will just ignore the invalid "
+ "flags and pretend they are not set.");
+ }
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);
F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT,
F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest. This mask
is used to to obtain all flags that are valid for setting. */
-
/*
- * The following flags are only present in the FILE_NAME attribute (in
+ * The following flag is only present in the FILE_NAME attribute (in
* the field file_attributes).
*/
FILE_ATTR_DUP_FILE_NAME_INDEX_PRESENT = const_cpu_to_le32(0x10000000),
/* Note, this is a copy of the corresponding bit from the mft record,
telling us whether this is a directory or not, i.e. whether it has
an index root attribute or not. */
+ /*
+ * The following flag is present both in the STANDARD_INFORMATION
+ * attribute and in the FILE_NAME attribute (in the field
+ * file_attributes).
+ */
FILE_ATTR_DUP_VIEW_INDEX_PRESENT = const_cpu_to_le32(0x20000000),
/* Note, this is a copy of the corresponding bit from the mft record,
telling us whether this file has a view index present (eg. object id
modified. */
/* 20*/ sle64 last_access_time; /* Time this mft record was last
accessed. */
-/* 28*/ sle64 allocated_size; /* Byte size of allocated space for the
- data attribute. NOTE: Is a multiple
- of the cluster size. */
+/* 28*/ sle64 allocated_size; /* Byte size of on-disk allocated space
+ for the data attribute. So for
+ normal $DATA, this is the
+ allocated_size from the unnamed
+ $DATA attribute and for compressed
+ and/or sparse $DATA, this is the
+ compressed_size from the unnamed
+ $DATA attribute. NOTE: This is a
+ multiple of the cluster size. */
/* 30*/ sle64 data_size; /* Byte size of actual data in data
attribute. */
/* 38*/ FILE_ATTR_FLAGS file_attributes; /* Flags describing the file. */
VOLUME_DELETE_USN_UNDERWAY = const_cpu_to_le16(0x0010),
VOLUME_REPAIR_OBJECT_ID = const_cpu_to_le16(0x0020),
+ VOLUME_CHKDSK_UNDERWAY = const_cpu_to_le16(0x4000),
VOLUME_MODIFIED_BY_CHKDSK = const_cpu_to_le16(0x8000),
- VOLUME_FLAGS_MASK = const_cpu_to_le16(0x803f),
+ VOLUME_FLAGS_MASK = const_cpu_to_le16(0xc03f),
/* To make our life easier when checking if we must mount read-only. */
- VOLUME_MUST_MOUNT_RO_MASK = const_cpu_to_le16(0x8027),
+ VOLUME_MUST_MOUNT_RO_MASK = const_cpu_to_le16(0xc027),
} __attribute__ ((__packed__));
typedef le16 VOLUME_FLAGS;
/**
* mft.c - NTFS kernel mft record operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
runlist_element *rl;
unsigned int block_start, block_end, m_start, m_end, page_ofs;
int i_bhs, nr_bhs, err = 0;
- unsigned char blocksize_bits = vol->mftmirr_ino->i_blkbits;
+ unsigned char blocksize_bits = vol->sb->s_blocksize_bits;
ntfs_debug("Entering for inode 0x%lx.", mft_no);
BUG_ON(!max_bhs);
{
ntfs_volume *vol = ni->vol;
struct page *page = ni->page;
- unsigned char blocksize_bits = vol->mft_ino->i_blkbits;
- unsigned int blocksize = 1 << blocksize_bits;
+ unsigned int blocksize = vol->sb->s_blocksize;
+ unsigned char blocksize_bits = vol->sb->s_blocksize_bits;
int max_bhs = vol->mft_record_size / blocksize;
struct buffer_head *bhs[max_bhs];
struct buffer_head *bh, *head;
/* Global variables. */
/* Slab caches (from super.c). */
-extern kmem_cache_t *ntfs_name_cache;
-extern kmem_cache_t *ntfs_inode_cache;
-extern kmem_cache_t *ntfs_big_inode_cache;
-extern kmem_cache_t *ntfs_attr_ctx_cache;
-extern kmem_cache_t *ntfs_index_ctx_cache;
+extern struct kmem_cache *ntfs_name_cache;
+extern struct kmem_cache *ntfs_inode_cache;
+extern struct kmem_cache *ntfs_big_inode_cache;
+extern struct kmem_cache *ntfs_attr_ctx_cache;
+extern struct kmem_cache *ntfs_index_ctx_cache;
/* The various operations structs defined throughout the driver files. */
extern struct address_space_operations ntfs_aops;
/*
* super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2001,2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
#include <linux/stddef.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h> /* For bdev_hardsect_size(). */
ntfs_error(sb, "Volume is dirty and read-only%s", es);
return -EROFS;
}
+ if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) {
+ ntfs_error(sb, "Volume has been modified by chkdsk "
+ "and is read-only%s", es);
+ return -EROFS;
+ }
if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) {
- ntfs_error(sb, "Volume has unsupported flags set and "
- "is read-only%s", es);
+ ntfs_error(sb, "Volume has unsupported flags set "
+ "(0x%x) and is read-only%s",
+ (unsigned)le16_to_cpu(vol->vol_flags),
+ es);
return -EROFS;
}
if (ntfs_set_volume_flags(vol, VOLUME_IS_DIRTY)) {
{
const char *read_err_str = "Unable to read %s boot sector.";
struct buffer_head *bh_primary, *bh_backup;
- long nr_blocks = NTFS_SB(sb)->nr_blocks;
+ sector_t nr_blocks = NTFS_SB(sb)->nr_blocks;
/* Try to read primary boot sector. */
if ((bh_primary = sb_bread(sb, 0))) {
/*
* If we managed to read sector zero and the volume is not
* read-only, copy the found, valid backup boot sector to the
- * primary boot sector.
+ * primary boot sector. Note we only copy the actual boot
+ * sector structure, not the actual whole device sector as that
+ * may be bigger and would potentially damage the $Boot system
+ * file (FIXME: Would be nice to know if the backup boot sector
+ * on a large sector device contains the whole boot loader or
+ * just the first 512 bytes).
*/
if (!(sb->s_flags & MS_RDONLY)) {
ntfs_warning(sb, "Hot-fix: Recovering invalid primary "
"boot sector from backup copy.");
memcpy(bh_primary->b_data, bh_backup->b_data,
- sb->s_blocksize);
+ NTFS_BLOCK_SIZE);
mark_buffer_dirty(bh_primary);
sync_dirty_buffer(bh_primary);
if (buffer_uptodate(bh_primary)) {
vol->sector_size);
ntfs_debug("vol->sector_size_bits = %i (0x%x)", vol->sector_size_bits,
vol->sector_size_bits);
- if (vol->sector_size != vol->sb->s_blocksize)
- ntfs_warning(vol->sb, "The boot sector indicates a sector size "
- "different from the device sector size.");
+ if (vol->sector_size < vol->sb->s_blocksize) {
+ ntfs_error(vol->sb, "Sector size (%i) is smaller than the "
+ "device block size (%lu). This is not "
+ "supported. Sorry.", vol->sector_size,
+ vol->sb->s_blocksize);
+ return FALSE;
+ }
ntfs_debug("sectors_per_cluster = 0x%x", b->bpb.sectors_per_cluster);
sectors_per_cluster_bits = ffs(b->bpb.sectors_per_cluster) - 1;
ntfs_debug("sectors_per_cluster_bits = 0x%x",
ntfs_debug("vol->cluster_size = %i (0x%x)", vol->cluster_size,
vol->cluster_size);
ntfs_debug("vol->cluster_size_mask = 0x%x", vol->cluster_size_mask);
- ntfs_debug("vol->cluster_size_bits = %i (0x%x)",
- vol->cluster_size_bits, vol->cluster_size_bits);
- if (vol->sector_size > vol->cluster_size) {
- ntfs_error(vol->sb, "Sector sizes above the cluster size are "
- "not supported. Sorry.");
- return FALSE;
- }
- if (vol->sb->s_blocksize > vol->cluster_size) {
- ntfs_error(vol->sb, "Cluster sizes smaller than the device "
- "sector size are not supported. Sorry.");
+ ntfs_debug("vol->cluster_size_bits = %i", vol->cluster_size_bits);
+ if (vol->cluster_size < vol->sector_size) {
+ ntfs_error(vol->sb, "Cluster size (%i) is smaller than the "
+ "sector size (%i). This is not supported. "
+ "Sorry.", vol->cluster_size, vol->sector_size);
return FALSE;
}
clusters_per_mft_record = b->clusters_per_mft_record;
* we store $MFT/$DATA, the table of mft records in the page cache.
*/
if (vol->mft_record_size > PAGE_CACHE_SIZE) {
- ntfs_error(vol->sb, "Mft record size %i (0x%x) exceeds the "
- "page cache size on your system %lu (0x%lx). "
+ ntfs_error(vol->sb, "Mft record size (%i) exceeds the "
+ "PAGE_CACHE_SIZE on your system (%lu). "
"This is not supported. Sorry.",
- vol->mft_record_size, vol->mft_record_size,
- PAGE_CACHE_SIZE, PAGE_CACHE_SIZE);
+ vol->mft_record_size, PAGE_CACHE_SIZE);
+ return FALSE;
+ }
+ /* We cannot support mft record sizes below the sector size. */
+ if (vol->mft_record_size < vol->sector_size) {
+ ntfs_error(vol->sb, "Mft record size (%i) is smaller than the "
+ "sector size (%i). This is not supported. "
+ "Sorry.", vol->mft_record_size,
+ vol->sector_size);
return FALSE;
}
clusters_per_index_record = b->clusters_per_index_record;
ntfs_debug("vol->index_record_size_bits = %i (0x%x)",
vol->index_record_size_bits,
vol->index_record_size_bits);
+ /* We cannot support index record sizes below the sector size. */
+ if (vol->index_record_size < vol->sector_size) {
+ ntfs_error(vol->sb, "Index record size (%i) is smaller than "
+ "the sector size (%i). This is not "
+ "supported. Sorry.", vol->index_record_size,
+ vol->sector_size);
+ return FALSE;
+ }
/*
* Get the size of the volume in clusters and check for 64-bit-ness.
* Windows currently only uses 32 bits to save the clusters so we do
}
ll = sle64_to_cpu(b->mft_lcn);
if (ll >= vol->nr_clusters) {
- ntfs_error(vol->sb, "MFT LCN is beyond end of volume. Weird.");
+ ntfs_error(vol->sb, "MFT LCN (%lli, 0x%llx) is beyond end of "
+ "volume. Weird.", (unsigned long long)ll,
+ (unsigned long long)ll);
return FALSE;
}
vol->mft_lcn = ll;
ntfs_debug("vol->mft_lcn = 0x%llx", (long long)vol->mft_lcn);
ll = sle64_to_cpu(b->mftmirr_lcn);
if (ll >= vol->nr_clusters) {
- ntfs_error(vol->sb, "MFTMirr LCN is beyond end of volume. "
- "Weird.");
+ ntfs_error(vol->sb, "MFTMirr LCN (%lli, 0x%llx) is beyond end "
+ "of volume. Weird.", (unsigned long long)ll,
+ (unsigned long long)ll);
return FALSE;
}
vol->mftmirr_lcn = ll;
/* Make sure that no unsupported volume flags are set. */
if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) {
static const char *es1a = "Volume is dirty";
- static const char *es1b = "Volume has unsupported flags set";
- static const char *es2 = ". Run chkdsk and mount in Windows.";
- const char *es1;
-
- es1 = vol->vol_flags & VOLUME_IS_DIRTY ? es1a : es1b;
+ static const char *es1b = "Volume has been modified by chkdsk";
+ static const char *es1c = "Volume has unsupported flags set";
+ static const char *es2a = ". Run chkdsk and mount in Windows.";
+ static const char *es2b = ". Mount in Windows.";
+ const char *es1, *es2;
+
+ es2 = es2a;
+ if (vol->vol_flags & VOLUME_IS_DIRTY)
+ es1 = es1a;
+ else if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) {
+ es1 = es1b;
+ es2 = es2b;
+ } else {
+ es1 = es1c;
+ ntfs_warning(sb, "Unsupported volume flags 0x%x "
+ "encountered.",
+ (unsigned)le16_to_cpu(vol->vol_flags));
+ }
/* If a read-write mount, convert it to a read-only mount. */
if (!(sb->s_flags & MS_RDONLY)) {
if (!(vol->on_errors & (ON_ERRORS_REMOUNT_RO |
ntfs_volume *vol;
struct buffer_head *bh;
struct inode *tmp_ino;
- int result;
+ int blocksize, result;
ntfs_debug("Entering.");
#ifndef NTFS_RW
if (!parse_options(vol, (char*)opt))
goto err_out_now;
+ /* We support sector sizes up to the PAGE_CACHE_SIZE. */
+ if (bdev_hardsect_size(sb->s_bdev) > PAGE_CACHE_SIZE) {
+ if (!silent)
+ ntfs_error(sb, "Device has unsupported sector size "
+ "(%i). The maximum supported sector "
+ "size on this architecture is %lu "
+ "bytes.",
+ bdev_hardsect_size(sb->s_bdev),
+ PAGE_CACHE_SIZE);
+ goto err_out_now;
+ }
/*
- * TODO: Fail safety check. In the future we should really be able to
- * cope with this being the case, but for now just bail out.
+ * Setup the device access block size to NTFS_BLOCK_SIZE or the hard
+ * sector size, whichever is bigger.
*/
- if (bdev_hardsect_size(sb->s_bdev) > NTFS_BLOCK_SIZE) {
+ blocksize = sb_min_blocksize(sb, NTFS_BLOCK_SIZE);
+ if (blocksize < NTFS_BLOCK_SIZE) {
if (!silent)
- ntfs_error(sb, "Device has unsupported hardsect_size.");
+ ntfs_error(sb, "Unable to set device block size.");
goto err_out_now;
}
-
- /* Setup the device access block size to NTFS_BLOCK_SIZE. */
- if (sb_set_blocksize(sb, NTFS_BLOCK_SIZE) != NTFS_BLOCK_SIZE) {
+ BUG_ON(blocksize != sb->s_blocksize);
+ ntfs_debug("Set device block size to %i bytes (block size bits %i).",
+ blocksize, sb->s_blocksize_bits);
+ /* Determine the size of the device in units of block_size bytes. */
+ if (!i_size_read(sb->s_bdev->bd_inode)) {
if (!silent)
- ntfs_error(sb, "Unable to set block size.");
+ ntfs_error(sb, "Unable to determine device size.");
goto err_out_now;
}
-
- /* Get the size of the device in units of NTFS_BLOCK_SIZE bytes. */
vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >>
- NTFS_BLOCK_SIZE_BITS;
-
+ sb->s_blocksize_bits;
/* Read the boot sector and return unlocked buffer head to it. */
if (!(bh = read_ntfs_boot_sector(sb, silent))) {
if (!silent)
ntfs_error(sb, "Not an NTFS volume.");
goto err_out_now;
}
-
/*
- * Extract the data from the boot sector and setup the ntfs super block
+ * Extract the data from the boot sector and setup the ntfs volume
* using it.
*/
result = parse_ntfs_boot_sector(vol, (NTFS_BOOT_SECTOR*)bh->b_data);
-
- /* Initialize the cluster and mft allocators. */
- ntfs_setup_allocators(vol);
-
brelse(bh);
-
if (!result) {
if (!silent)
ntfs_error(sb, "Unsupported NTFS filesystem.");
goto err_out_now;
}
-
/*
- * TODO: When we start coping with sector sizes different from
- * NTFS_BLOCK_SIZE, we now probably need to set the blocksize of the
- * device (probably to NTFS_BLOCK_SIZE).
+ * If the boot sector indicates a sector size bigger than the current
+ * device block size, switch the device block size to the sector size.
+ * TODO: It may be possible to support this case even when the set
+ * below fails, we would just be breaking up the i/o for each sector
+ * into multiple blocks for i/o purposes but otherwise it should just
+ * work. However it is safer to leave disabled until someone hits this
+ * error message and then we can get them to try it without the setting
+ * so we know for sure that it works.
*/
-
+ if (vol->sector_size > blocksize) {
+ blocksize = sb_set_blocksize(sb, vol->sector_size);
+ if (blocksize != vol->sector_size) {
+ if (!silent)
+ ntfs_error(sb, "Unable to set device block "
+ "size to sector size (%i).",
+ vol->sector_size);
+ goto err_out_now;
+ }
+ BUG_ON(blocksize != sb->s_blocksize);
+ vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >>
+ sb->s_blocksize_bits;
+ ntfs_debug("Changed device block size to %i bytes (block size "
+ "bits %i) to match volume sector size.",
+ blocksize, sb->s_blocksize_bits);
+ }
+ /* Initialize the cluster and mft allocators. */
+ ntfs_setup_allocators(vol);
/* Setup remaining fields in the super block. */
sb->s_magic = NTFS_SB_MAGIC;
-
/*
* Ntfs allows 63 bits for the file size, i.e. correct would be:
* sb->s_maxbytes = ~0ULL >> 1;
* without overflowing the index or to 2^63 - 1, whichever is smaller.
*/
sb->s_maxbytes = MAX_LFS_FILESIZE;
-
+ /* Ntfs measures time in 100ns intervals. */
sb->s_time_gran = 100;
-
/*
* Now load the metadata required for the page cache and our address
* space operations to function. We do this by setting up a specialised
* strings of the maximum length allowed by NTFS, which is NTFS_MAX_NAME_LEN
* (255) Unicode characters + a terminating NULL Unicode character.
*/
-kmem_cache_t *ntfs_name_cache;
+struct kmem_cache *ntfs_name_cache;
/* Slab caches for efficient allocation/deallocation of inodes. */
-kmem_cache_t *ntfs_inode_cache;
-kmem_cache_t *ntfs_big_inode_cache;
+struct kmem_cache *ntfs_inode_cache;
+struct kmem_cache *ntfs_big_inode_cache;
/* Init once constructor for the inode slab cache. */
-static void ntfs_big_inode_init_once(void *foo, kmem_cache_t *cachep,
+static void ntfs_big_inode_init_once(void *foo, struct kmem_cache *cachep,
unsigned long flags)
{
ntfs_inode *ni = (ntfs_inode *)foo;
* Slab caches to optimize allocations and deallocations of attribute search
* contexts and index contexts, respectively.
*/
-kmem_cache_t *ntfs_attr_ctx_cache;
-kmem_cache_t *ntfs_index_ctx_cache;
+struct kmem_cache *ntfs_attr_ctx_cache;
+struct kmem_cache *ntfs_index_ctx_cache;
/* Driver wide semaphore. */
DECLARE_MUTEX(ntfs_lock);
* Part of the Linux-NTFS project.
*
* Copyright (c) 2001 Richard Russon <ntfs@flatcap.org>
- * Copyright (c) 2001-2004 Anton Altaparmakov
- *
- * Modified for mkntfs inclusion 9 June 2001 by Anton Altaparmakov.
- * Modified for kernel inclusion 10 September 2001 by Anton Altparmakov.
+ * Copyright (c) 2001-2006 Anton Altaparmakov
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
if (!uc)
return uc;
memset(uc, 0, default_upcase_len * sizeof(ntfschar));
+ /* Generate the little endian Unicode upcase table used by ntfs. */
for (i = 0; i < default_upcase_len; i++)
uc[i] = cpu_to_le16(i);
for (r = 0; uc_run_table[r][0]; r++)
for (i = uc_run_table[r][0]; i < uc_run_table[r][1]; i++)
- uc[i] = cpu_to_le16((le16_to_cpu(uc[i]) +
- uc_run_table[r][2]));
+ uc[i] = cpu_to_le16(le16_to_cpu(uc[i]) +
+ uc_run_table[r][2]);
for (r = 0; uc_dup_table[r][0]; r++)
for (i = uc_dup_table[r][0]; i < uc_dup_table[r][1]; i += 2)
uc[i + 1] = cpu_to_le16(le16_to_cpu(uc[i + 1]) - 1);
* volume.h - Defines for volume structures in NTFS Linux kernel driver. Part
* of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
* structure has stabilized... (AIA)
*/
/* Device specifics. */
- struct super_block *sb; /* Pointer back to the super_block,
- so we don't have to get the offset
- every time. */
- LCN nr_blocks; /* Number of NTFS_BLOCK_SIZE bytes
+ struct super_block *sb; /* Pointer back to the super_block. */
+ LCN nr_blocks; /* Number of sb->s_blocksize bytes
sized blocks on the device. */
/* Configuration provided by user at mount time. */
unsigned long flags; /* Miscellaneous flags, see below. */
NV_ShowSystemFiles, /* 1: Return system files in ntfs_readdir(). */
NV_CaseSensitive, /* 1: Treat file names as case sensitive and
create filenames in the POSIX namespace.
- Otherwise be case insensitive and create
- file names in WIN32 namespace. */
+ Otherwise be case insensitive but still
+ create file names in POSIX namespace. */
NV_LogFileEmpty, /* 1: $LogFile journal is empty. */
NV_QuotaOutOfDate, /* 1: $Quota is out of date. */
NV_UsnJrnlStamped, /* 1: $UsnJrnl has been stamped. */
* Macro tricks to expand the NVolFoo(), NVolSetFoo(), and NVolClearFoo()
* functions.
*/
-#define NVOL_FNS(flag) \
+#define DEFINE_NVOL_BIT_OPS(flag) \
static inline int NVol##flag(ntfs_volume *vol) \
{ \
return test_bit(NV_##flag, &(vol)->flags); \
}
/* Emit the ntfs volume bitops functions. */
-NVOL_FNS(Errors)
-NVOL_FNS(ShowSystemFiles)
-NVOL_FNS(CaseSensitive)
-NVOL_FNS(LogFileEmpty)
-NVOL_FNS(QuotaOutOfDate)
-NVOL_FNS(UsnJrnlStamped)
-NVOL_FNS(SparseEnabled)
+DEFINE_NVOL_BIT_OPS(Errors)
+DEFINE_NVOL_BIT_OPS(ShowSystemFiles)
+DEFINE_NVOL_BIT_OPS(CaseSensitive)
+DEFINE_NVOL_BIT_OPS(LogFileEmpty)
+DEFINE_NVOL_BIT_OPS(QuotaOutOfDate)
+DEFINE_NVOL_BIT_OPS(UsnJrnlStamped)
+DEFINE_NVOL_BIT_OPS(SparseEnabled)
#endif /* _LINUX_NTFS_VOLUME_H */
root_inode = proc_get_inode(s, PROC_ROOT_INO, &proc_root);
if (!root_inode)
goto out_no_root;
- /*
- * Fixup the root inode's nlink value
- */
- root_inode->i_nlink += nr_processes();
root_inode->i_uid = 0;
root_inode->i_gid = 0;
s->s_root = d_alloc_root(root_inode);
proc_bus = proc_mkdir("bus", NULL);
}
-static struct dentry *proc_root_lookup(struct inode * dir, struct dentry * dentry, struct nameidata *nd)
+static int proc_root_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat
+)
{
- /*
- * nr_threads is actually protected by the tasklist_lock;
- * however, it's conventional to do reads, especially for
- * reporting, without any locking whatsoever.
- */
- if (dir->i_ino == PROC_ROOT_INO) /* check for safety... */
- dir->i_nlink = proc_root.nlink + nr_threads;
+ generic_fillattr(dentry->d_inode, stat);
+ stat->nlink = proc_root.nlink + nr_processes();
+ return 0;
+}
+static struct dentry *proc_root_lookup(struct inode * dir, struct dentry * dentry, struct nameidata *nd)
+{
if (!proc_lookup(dir, dentry, nd)) {
return NULL;
}
*/
static struct inode_operations proc_root_inode_operations = {
.lookup = proc_root_lookup,
+ .getattr = proc_root_getattr,
};
/*
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
+#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/smp_lock.h>
d_instantiate(dentry, inode);
dget(dentry); /* Extra count - pin the dentry in core */
error = 0;
+ dir->i_mtime = dir->i_ctime = CURRENT_TIME;
}
return error;
}
return (void *)s->s_bdev == data;
}
+static void bdev_uevent(struct block_device *bdev, enum kobject_action action)
+{
+ if (bdev->bd_disk) {
+ if (bdev->bd_part)
+ kobject_uevent(&bdev->bd_part->kobj, action);
+ else
+ kobject_uevent(&bdev->bd_disk->kobj, action);
+ }
+}
+
struct super_block *get_sb_bdev(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data,
int (*fill_super)(struct super_block *, void *, int))
up_write(&s->s_umount);
deactivate_super(s);
s = ERR_PTR(error);
- } else
+ } else {
s->s_flags |= MS_ACTIVE;
+ bdev_uevent(bdev, KOBJ_MOUNT);
+ }
}
return s;
{
struct block_device *bdev = sb->s_bdev;
+ bdev_uevent(bdev, KOBJ_UMOUNT);
generic_shutdown_super(sb);
sync_blockdev(bdev);
close_bdev_excl(bdev);
extern int at91_set_gpio_input(unsigned pin, int use_pullup);
extern int at91_set_gpio_output(unsigned pin, int value);
extern int at91_set_deglitch(unsigned pin, int is_on);
+extern int at91_set_multi_drive(unsigned pin, int is_on);
/* callable at any time */
extern int at91_set_gpio_value(unsigned pin, int value);
#error "Do not include this directly, instead #include <asm/hardware.h>"
#endif
-#define NAS100D_SDA_PIN 6
-#define NAS100D_SCL_PIN 5
+#define NAS100D_SDA_PIN 5
+#define NAS100D_SCL_PIN 6
/*
* NAS100D PCI IRQs
unsigned short pad;
} __attribute__ ((packed));
-extern struct Xgt_desc_struct idt_descr, cpu_gdt_descr[NR_CPUS];
+extern struct Xgt_desc_struct idt_descr;
+DECLARE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
+
static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
{
- return ((struct desc_struct *)cpu_gdt_descr[cpu].address);
+ return (struct desc_struct *)per_cpu(cpu_gdt_descr, cpu).address;
}
#define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8))
#include <linux/types.h>
#include <linux/ptrace.h>
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+
+struct kprobe;
struct pt_regs;
typedef u8 kprobe_opcode_t;
#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)pentry
#define ARCH_SUPPORTS_KRETPROBES
-#define arch_remove_kprobe(p) do {} while (0)
+void arch_remove_kprobe(struct kprobe *p);
void kretprobe_trampoline(void);
/* Architecture specific copy of original instruction*/
struct arch_specific_insn {
/* copy of the original instruction */
- kprobe_opcode_t insn[MAX_INSN_SIZE];
+ kprobe_opcode_t *insn;
};
struct prev_kprobe {
" bra 2f; \n"
" .fillinsn \n"
"1:"
- M32R_UNLOCK" %2, @%1; \n"
+ M32R_UNLOCK" %0, @%1; \n"
" .fillinsn \n"
"2:"
: "=&r" (retval)
" .long 1b,4b\n" \
" .long 2b,4b\n" \
".previous" \
- : "=r"(err) \
+ : "=&r"(err) \
: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \
: "r14", "memory")
" .long 1b,4b\n" \
" .long 2b,4b\n" \
".previous" \
- : "=r"(err) \
+ : "=&r"(err) \
: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \
: "r14", "memory")
#else
" .balign 4\n" \
" .long 1b,3b\n" \
".previous" \
- : "=r"(err) \
+ : "=&r"(err) \
: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \
: "r14", "memory")
" .balign 4\n" \
" .long 1b,3b\n" \
".previous" \
- : "=r"(err), "=&r"(x) \
+ : "=&r"(err), "=&r"(x) \
: "r"(addr), "i"(-EFAULT), "0"(err) \
: "r14", "memory")
extern void (*enable_irq)(unsigned int);
extern void (*disable_irq)(unsigned int);
-#define enable_irq_nosync enable_irq
+#define disable_irq_nosync disable_irq
struct pt_regs;
: "d0", "a0", "a1", "d6");
}
+#define __raw_writel raw_outl
#endif /* __KERNEL__ */
#define __get_user_check(x,ptr,size) \
({ \
long __gu_err = -EFAULT; \
- const void __user * __gu_ptr = (ptr); \
+ const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \
\
if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \
__get_user_common((x), size, __gu_ptr); \
: "=r" (__gu_err), "=r" (__gu_tmp) \
: "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \
\
- (val) = (__typeof__(val)) __gu_tmp; \
+ (val) = (__typeof__(*(addr))) __gu_tmp; \
}
/*
" .previous \n" \
: "=r" (__gu_err), "=&r" (__gu_tmp) \
: "0" (0), "r" (addr), "i" (-EFAULT)); \
- (val) = __gu_tmp; \
+ (val) = (__typeof__(*(addr))) __gu_tmp; \
}
/*
#define __NR_mknodat (__NR_Linux + 290)
#define __NR_fchownat (__NR_Linux + 291)
#define __NR_futimesat (__NR_Linux + 292)
-#define __NR_newfstatat (__NR_Linux + 293)
+#define __NR_fstatat (__NR_Linux + 293)
#define __NR_unlinkat (__NR_Linux + 294)
#define __NR_renameat (__NR_Linux + 295)
#define __NR_linkat (__NR_Linux + 296)
#define __NR_mknodat (__NR_Linux + 249)
#define __NR_fchownat (__NR_Linux + 250)
#define __NR_futimesat (__NR_Linux + 251)
-#define __NR_newfstatat (__NR_Linux + 252)
+#define __NR_fstatat (__NR_Linux + 252)
#define __NR_unlinkat (__NR_Linux + 253)
#define __NR_renameat (__NR_Linux + 254)
#define __NR_linkat (__NR_Linux + 255)
#define __NR_mknodat (__NR_Linux + 253)
#define __NR_fchownat (__NR_Linux + 254)
#define __NR_futimesat (__NR_Linux + 255)
-#define __NR_newfstatat (__NR_Linux + 256)
+#define __NR_fstatat (__NR_Linux + 256)
#define __NR_unlinkat (__NR_Linux + 257)
#define __NR_renameat (__NR_Linux + 258)
#define __NR_linkat (__NR_Linux + 259)
#endif
/* We need to mark all pages as being coherent if we're SMP or we
- * have a 74[45]x and an MPC107 host bridge.
+ * have a 74[45]x and an MPC107 host bridge. Also 83xx requires
+ * it for PCI "streaming/prefetch" to work properly.
*/
-#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE)
+#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
+ || defined(CONFIG_PPC_83xx)
#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT
#else
#define CPU_FTR_COMMON 0
CPU_FTRS_G2_LE = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS,
CPU_FTRS_E300 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
- CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS,
+ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS |
+ CPU_FTR_COMMON,
CPU_FTRS_CLASSIC32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
} hpte_t;
extern hpte_t *htab_address;
+extern unsigned long htab_size_bytes;
extern unsigned long htab_hash_mask;
/*
#define proc_trap() asm volatile("trap")
#ifdef CONFIG_PPC64
-static inline void ppc64_runlatch_on(void)
-{
- unsigned long ctrl;
-
- if (cpu_has_feature(CPU_FTR_CTRL)) {
- ctrl = mfspr(SPRN_CTRLF);
- ctrl |= CTRL_RUNLATCH;
- mtspr(SPRN_CTRLT, ctrl);
- }
-}
-
-static inline void ppc64_runlatch_off(void)
-{
- unsigned long ctrl;
-
- if (cpu_has_feature(CPU_FTR_CTRL)) {
- ctrl = mfspr(SPRN_CTRLF);
- ctrl &= ~CTRL_RUNLATCH;
- mtspr(SPRN_CTRLT, ctrl);
- }
-}
+
+extern void ppc64_runlatch_on(void);
+extern void ppc64_runlatch_off(void);
extern unsigned long scom970_read(unsigned int address);
extern void scom970_write(unsigned int address, unsigned long value);
#define __get_SP() ({unsigned long sp; \
asm volatile("mr %0,1": "=r" (sp)); sp;})
-#else /* __ASSEMBLY__ */
-
-#define RUNLATCH_ON(REG) \
-BEGIN_FTR_SECTION \
- mfspr (REG),SPRN_CTRLF; \
- ori (REG),(REG),CTRL_RUNLATCH; \
- mtspr SPRN_CTRLT,(REG); \
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
-
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_REG_H */
#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
#define TIF_32BIT 5 /* 32 bit binary */
-/* #define SPARE 6 */
+#define TIF_RUNLATCH 6 /* Is the runlatch enabled? */
#define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */
#define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */
#define TIF_SINGLESTEP 9 /* singlestepping active */
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_32BIT (1<<TIF_32BIT)
-/* #define _SPARE (1<<SPARE) */
+#define _TIF_RUNLATCH (1<<TIF_RUNLATCH)
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
extern void setup_pci_ptrs(void);
-/*
- * Power macintoshes have either a CUDA or a PMU controlling
- * system reset, power, NVRAM, RTC.
- */
-typedef enum sys_ctrler_kind {
- SYS_CTRLER_UNKNOWN = 0,
- SYS_CTRLER_CUDA = 1,
- SYS_CTRLER_PMU = 2,
- SYS_CTRLER_SMU = 3,
-} sys_ctrler_t;
-
-extern sys_ctrler_t sys_ctrler;
-
#ifdef CONFIG_SMP
struct smp_ops_t {
void (*message_pass)(int target, int msg);
*
* Here ist how the ioctl-nr should be used:
* 0 - 31 DASD driver itself
- * 32 - 229 still open
- * 230 - 239 DASD extended error reporting
+ * 32 - 239 still open
* 240 - 255 reserved for EMC
*******************************************************************************/
#define BIODASDPSRD _IOR(DASD_IOCTL_LETTER,4,dasd_rssd_perf_stats_t)
/* Get Attributes (cache operations) */
#define BIODASDGATTR _IOR(DASD_IOCTL_LETTER,5,attrib_data_t)
-/* retrieve extended error-reporting value */
-#define BIODASDEERGET _IOR(DASD_IOCTL_LETTER,6,int)
/* #define BIODASDFORMAT _IOW(IOCTL_LETTER,0,format_data_t) , deprecated */
#define BIODASDFMT _IOW(DASD_IOCTL_LETTER,1,format_data_t)
/* Set Attributes (cache operations) */
#define BIODASDSATTR _IOW(DASD_IOCTL_LETTER,2,attrib_data_t)
-/* retrieve extended error-reporting value */
-#define BIODASDEERSET _IOW(DASD_IOCTL_LETTER,3,int)
-
-
-/* remove all records from the eer buffer */
-#define DASD_EER_PURGE _IO(DASD_IOCTL_LETTER,230)
-/* set the number of pages that are used for the internal eer buffer */
-#define DASD_EER_SETBUFSIZE _IOW(DASD_IOCTL_LETTER,230,int)
#endif /* DASD_H */
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _SPARC64_FUTEX_H
+#define _SPARC64_FUTEX_H
-#include <asm-generic/futex.h>
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
-#endif
+#define __futex_cas_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ "\n1: lduwa [%3] %%asi, %2\n" \
+ " " insn "\n" \
+ "2: casa [%3] %%asi, %2, %1\n" \
+ " cmp %2, %1\n" \
+ " bne,pn %%icc, 1b\n" \
+ " mov 0, %0\n" \
+ "3:\n" \
+ " .section .fixup,#alloc,#execinstr\n" \
+ " .align 4\n" \
+ "4: ba 3b\n" \
+ " mov %5, %0\n" \
+ " .previous\n" \
+ " .section __ex_table,#alloc\n" \
+ " .align 4\n" \
+ " .word 1b, 4b\n" \
+ " .word 2b, 4b\n" \
+ " .previous\n" \
+ : "=&r" (ret), "=&r" (oldval), "=&r" (tem) \
+ : "r" (uaddr), "r" (oparg), "i" (-EFAULT) \
+ : "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret, tem;
+
+ if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int))))
+ return -EFAULT;
+ if (unlikely((((unsigned long) uaddr) & 0x3UL)))
+ return -EINVAL;
+
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ inc_preempt_count();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ dec_preempt_count();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+#endif /* !(_SPARC64_FUTEX_H) */
#define raw_smp_processor_id() (current_thread_info()->cpu)
+extern void smp_setup_cpu_possible_map(void);
+
#endif /* !(__ASSEMBLY__) */
+#else
+
+#define smp_setup_cpu_possible_map() do { } while (0)
+
#endif /* !(CONFIG_SMP) */
#define NO_PROC_ID 0xFF
extern int acpi_skip_timer_override;
+extern int unsync_tsc_on_multicluster;
+
+static inline int acpi_madt_oem_check(char *oem, char *productid)
+{
+ /* Copied from i386. Probably has too many entries. */
+ if (!strncmp(oem, "IBM ENSW", 8) &&
+ (!strncmp(productid, "VIGIL SMP", 9)
+ || !strncmp(productid, "EXA", 3)
+ || !strncmp(productid, "RUTHLESS SMP", 12))) {
+ unsync_tsc_on_multicluster = 1;
+ }
+ return 0;
+}
+
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
#endif
#define pcibios_scan_all_fns(a, b) 0
-extern int no_iommu, force_iommu;
-
extern unsigned long pci_mem_start;
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM (pci_mem_start)
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
-#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
+#define USER_PTRS_PER_PGD ((TASK_SIZE-1)/PGDIR_SIZE+1)
#define FIRST_USER_ADDRESS 0
#ifndef __ASSEMBLY__
extern void ia32_syscall(void);
extern void iommu_hole_init(void);
-extern void time_init_gtod(void);
extern int pmtimer_mark_offset(void);
extern void pmtimer_resume(void);
extern void pmtimer_wait(unsigned);
extern int reboot_force;
extern int notsc_setup(char *);
+extern int setup_additional_cpus(char *);
extern void smp_local_timer_interrupt(struct pt_regs * regs);
extern struct acpi_table_mcfg_config *pci_mmcfg_config;
extern int pci_mmcfg_config_num;
-extern int sbf_port ;
+extern int sbf_port;
+extern unsigned long acpi_video_flags;
#else /* !CONFIG_ACPI */
KOBJ_ADD = (__force kobject_action_t) 0x01, /* exclusive to core */
KOBJ_REMOVE = (__force kobject_action_t) 0x02, /* exclusive to core */
KOBJ_CHANGE = (__force kobject_action_t) 0x03, /* device state change */
- KOBJ_OFFLINE = (__force kobject_action_t) 0x04, /* device offline */
- KOBJ_ONLINE = (__force kobject_action_t) 0x05, /* device online */
+ KOBJ_MOUNT = (__force kobject_action_t) 0x04, /* mount event for block devices (broken) */
+ KOBJ_UMOUNT = (__force kobject_action_t) 0x05, /* umount event for block devices (broken) */
+ KOBJ_OFFLINE = (__force kobject_action_t) 0x06, /* device offline */
+ KOBJ_ONLINE = (__force kobject_action_t) 0x07, /* device online */
};
struct kobject {
void drop_pagecache(void);
void drop_slab(void);
+#ifndef CONFIG_MMU
+#define randomize_va_space 0
+#else
extern int randomize_va_space;
+#endif
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
/*
* These are the command types.
*/
-#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_TYPE)
+#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK)
unsigned int retries; /* max number of retries */
unsigned int error; /* command error */
extern int nfs_register_sysctl(void);
extern void nfs_unregister_sysctl(void);
#else
-#define nfs_register_sysctl() do { } while(0)
+#define nfs_register_sysctl() 0
#define nfs_unregister_sysctl() do { } while(0)
#endif
#define UART_CTR 0xFF
/*
- * The 16C950 Additional Control Reigster
+ * The 16C950 Additional Control Register
*/
#define UART_ACR_RXDIS 0x01 /* Receiver disable */
-#define UART_ACR_TXDIS 0x02 /* Receiver disable */
+#define UART_ACR_TXDIS 0x02 /* Transmitter disable */
#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
#define vm_swap_full() (nr_swap_pages*2 < total_swap_pages)
/* linux/mm/oom_kill.c */
-extern void out_of_memory(gfp_t gfp_mask, int order);
+extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order);
/* linux/mm/memory.c */
extern void swapin_readahead(swp_entry_t, unsigned long, struct vm_area_struct *);
asmlinkage long sys_symlinkat(const char __user * oldname,
int newdfd, const char __user * newname);
asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
- int newdfd, const char __user *newname);
+ int newdfd, const char __user *newname, int flags);
asmlinkage long sys_renameat(int olddfd, const char __user * oldname,
int newdfd, const char __user * newname);
asmlinkage long sys_futimesat(int dfd, char __user *filename,
KERN_RANDOMIZE=68, /* int: randomize virtual address space */
KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
KERN_SPIN_RETRY=70, /* int: number of spinlock retries */
+ KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
};
extern void __xfrm_state_destroy(struct xfrm_state *);
+static inline void __xfrm_state_put(struct xfrm_state *x)
+{
+ atomic_dec(&x->refcnt);
+}
+
static inline void xfrm_state_put(struct xfrm_state *x)
{
if (atomic_dec_and_test(&x->refcnt))
for (aux = context->aux; aux; aux = aux->next) {
- ab = audit_log_start(context, GFP_KERNEL, aux->type);
+ ab = audit_log_start(context, gfp_mask, aux->type);
if (!ab)
continue; /* audit_panic has been called */
}
if (context->pwd && context->pwdmnt) {
- ab = audit_log_start(context, GFP_KERNEL, AUDIT_CWD);
+ ab = audit_log_start(context, gfp_mask, AUDIT_CWD);
if (ab) {
audit_log_d_path(ab, "cwd=", context->pwd, context->pwdmnt);
audit_log_end(ab);
}
}
for (i = 0; i < context->name_count; i++) {
- ab = audit_log_start(context, GFP_KERNEL, AUDIT_PATH);
+ ab = audit_log_start(context, gfp_mask, AUDIT_PATH);
if (!ab)
continue; /* audit_panic has been called */
fs = init_task.fs;
current->fs = fs;
atomic_inc(&fs->count);
+ exit_namespace(current);
+ current->namespace = init_task.namespace;
+ get_namespace(current->namespace);
exit_files(current);
current->files = init_task.files;
atomic_inc(¤t->files->count);
cond_syscall(sys_setuid16);
cond_syscall(sys_vm86old);
cond_syscall(sys_vm86);
+cond_syscall(compat_sys_ipc);
+cond_syscall(compat_sys_sysctl);
/* arch-specific weak syscall entries */
cond_syscall(sys_pciconfig_read);
#include <linux/limits.h>
#include <linux/dcache.h>
#include <linux/syscalls.h>
+#include <linux/nfs_fs.h>
+#include <linux/acpi.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
-#ifdef CONFIG_ROOT_NFS
-#include <linux/nfs_fs.h>
-#endif
-
#if defined(CONFIG_SYSCTL)
/* External variables not in a header file. */
.proc_handler = &proc_dointvec,
},
#endif
+#if defined(CONFIG_MMU)
{
.ctl_name = KERN_RANDOMIZE,
.procname = "randomize_va_space",
.mode = 0644,
.proc_handler = &proc_dointvec,
},
+#endif
#if defined(CONFIG_S390) && defined(CONFIG_SMP)
{
.ctl_name = KERN_SPIN_RETRY,
.mode = 0644,
.proc_handler = &proc_dointvec,
},
+#endif
+#ifdef CONFIG_ACPI_SLEEP
+ {
+ .ctl_name = KERN_ACPI_VIDEO_FLAGS,
+ .procname = "acpi_video_flags",
+ .data = &acpi_video_flags,
+ .maxlen = sizeof (unsigned long),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
#endif
{ .ctl_name = 0 }
};
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
-#include <linux/io.h>
#include <linux/module.h>
+#include <linux/io.h>
/**
* __iowrite32_copy - copy data to MMIO space, in 32-bit units
return "remove";
case KOBJ_CHANGE:
return "change";
+ case KOBJ_MOUNT:
+ return "mount";
+ case KOBJ_UMOUNT:
+ return "umount";
case KOBJ_OFFLINE:
return "offline";
case KOBJ_ONLINE:
*/
if ((flags & MPOL_MF_MOVE_ALL) || page_mapcount(page) == 1) {
if (isolate_lru_page(page))
- list_add(&page->lru, pagelist);
+ list_add_tail(&page->lru, pagelist);
}
}
LIST_HEAD(moved);
LIST_HEAD(failed);
int err = 0;
+ unsigned long offset = 0;
int nr_pages;
struct page *page;
struct list_head *p;
redo:
nr_pages = 0;
list_for_each(p, pagelist) {
- if (vma)
- page = alloc_page_vma(GFP_HIGHUSER, vma, vma->vm_start);
+ if (vma) {
+ /*
+ * The address passed to alloc_page_vma is used to
+ * generate the proper interleave behavior. We fake
+ * the address here by an increasing offset in order
+ * to get the proper distribution of pages.
+ *
+ * No decision has been made as to which page
+ * a certain old page is moved to so we cannot
+ * specify the correct address.
+ */
+ page = alloc_page_vma(GFP_HIGHUSER, vma,
+ offset + vma->vm_start);
+ offset += PAGE_SIZE;
+ }
else
page = alloc_pages_node(dest, GFP_HIGHUSER, 0);
err = -ENOMEM;
goto out;
}
- list_add(&page->lru, &newlist);
+ list_add_tail(&page->lru, &newlist);
nr_pages++;
- if (nr_pages > MIGRATE_CHUNK_SIZE);
+ if (nr_pages > MIGRATE_CHUNK_SIZE)
break;
}
err = migrate_pages(pagelist, &newlist, &moved, &failed);
nodes_clear(*nodes);
if (maxnode == 0 || !nmask)
return 0;
- if (maxnode > PAGE_SIZE)
+ if (maxnode > PAGE_SIZE*BITS_PER_BYTE)
return -EINVAL;
nlongs = BITS_TO_LONGS(maxnode);
EXPORT_SYMBOL(vfree);
EXPORT_SYMBOL(vmalloc_to_page);
EXPORT_SYMBOL(vmalloc_32);
+EXPORT_SYMBOL(vmap);
+EXPORT_SYMBOL(vunmap);
/*
* Handle all mappings that got truncated by a "truncate()"
/*
* Processes which fork a lot of child processes are likely
- * a good choice. We add the vmsize of the children if they
+ * a good choice. We add half the vmsize of the children if they
* have an own mm. This prevents forking servers to flood the
- * machine with an endless amount of children
+ * machine with an endless amount of children. In case a single
+ * child is eating the vast majority of memory, adding only half
+ * to the parents will make the child our kill candidate of choice.
*/
list_for_each(tsk, &p->children) {
struct task_struct *chld;
chld = list_entry(tsk, struct task_struct, sibling);
if (chld->mm != p->mm && chld->mm)
- points += chld->mm->total_vm;
+ points += chld->mm->total_vm/2 + 1;
}
/*
return points;
}
+/*
+ * Types of limitations to the nodes from which allocations may occur
+ */
+#define CONSTRAINT_NONE 1
+#define CONSTRAINT_MEMORY_POLICY 2
+#define CONSTRAINT_CPUSET 3
+
+/*
+ * Determine the type of allocation constraint.
+ */
+static inline int constrained_alloc(struct zonelist *zonelist, gfp_t gfp_mask)
+{
+#ifdef CONFIG_NUMA
+ struct zone **z;
+ nodemask_t nodes = node_online_map;
+
+ for (z = zonelist->zones; *z; z++)
+ if (cpuset_zone_allowed(*z, gfp_mask))
+ node_clear((*z)->zone_pgdat->node_id,
+ nodes);
+ else
+ return CONSTRAINT_CPUSET;
+
+ if (!nodes_empty(nodes))
+ return CONSTRAINT_MEMORY_POLICY;
+#endif
+
+ return CONSTRAINT_NONE;
+}
+
/*
* Simple selection loop. We chose the process with the highest
* number of 'points'. We expect the caller will lock the tasklist.
*
* (not docbooked, we don't want this one cluttering up the manual)
*/
-static struct task_struct * select_bad_process(void)
+static struct task_struct *select_bad_process(unsigned long *ppoints)
{
- unsigned long maxpoints = 0;
struct task_struct *g, *p;
struct task_struct *chosen = NULL;
struct timespec uptime;
+ *ppoints = 0;
do_posix_clock_monotonic_gettime(&uptime);
do_each_thread(g, p) {
return p;
points = badness(p, uptime.tv_sec);
- if (points > maxpoints || !chosen) {
+ if (points > *ppoints || !chosen) {
chosen = p;
- maxpoints = points;
+ *ppoints = points;
}
} while_each_thread(g, p);
return chosen;
* CAP_SYS_RAW_IO set, send SIGTERM instead (but it's unlikely that
* we select a process with CAP_SYS_RAW_IO set).
*/
-static void __oom_kill_task(task_t *p)
+static void __oom_kill_task(task_t *p, const char *message)
{
if (p->pid == 1) {
WARN_ON(1);
return;
}
task_unlock(p);
- printk(KERN_ERR "Out of Memory: Killed process %d (%s).\n",
- p->pid, p->comm);
+ printk(KERN_ERR "%s: Killed process %d (%s).\n",
+ message, p->pid, p->comm);
/*
* We give our sacrificial lamb high priority and access to
force_sig(SIGKILL, p);
}
-static struct mm_struct *oom_kill_task(task_t *p)
+static struct mm_struct *oom_kill_task(task_t *p, const char *message)
{
struct mm_struct *mm = get_task_mm(p);
task_t * g, * q;
return NULL;
}
- __oom_kill_task(p);
+ __oom_kill_task(p, message);
/*
* kill all processes that share the ->mm (i.e. all threads),
* but are in a different thread group
*/
do_each_thread(g, q)
if (q->mm == mm && q->tgid != p->tgid)
- __oom_kill_task(q);
+ __oom_kill_task(q, message);
while_each_thread(g, q);
return mm;
}
-static struct mm_struct *oom_kill_process(struct task_struct *p)
+static struct mm_struct *oom_kill_process(struct task_struct *p,
+ unsigned long points, const char *message)
{
struct mm_struct *mm;
struct task_struct *c;
struct list_head *tsk;
+ printk(KERN_ERR "Out of Memory: Kill process %d (%s) score %li and "
+ "children.\n", p->pid, p->comm, points);
/* Try to kill a child first */
list_for_each(tsk, &p->children) {
c = list_entry(tsk, struct task_struct, sibling);
if (c->mm == p->mm)
continue;
- mm = oom_kill_task(c);
+ mm = oom_kill_task(c, message);
if (mm)
return mm;
}
- return oom_kill_task(p);
+ return oom_kill_task(p, message);
}
/**
* OR try to be smart about which process to kill. Note that we
* don't have to be perfect here, we just have to be good.
*/
-void out_of_memory(gfp_t gfp_mask, int order)
+void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order)
{
struct mm_struct *mm = NULL;
- task_t * p;
+ task_t *p;
+ unsigned long points;
if (printk_ratelimit()) {
printk("oom-killer: gfp_mask=0x%x, order=%d\n",
cpuset_lock();
read_lock(&tasklist_lock);
+
+ /*
+ * Check if there were limitations on the allocation (only relevant for
+ * NUMA) that may require different handling.
+ */
+ switch (constrained_alloc(zonelist, gfp_mask)) {
+ case CONSTRAINT_MEMORY_POLICY:
+ mm = oom_kill_process(current, points,
+ "No available memory (MPOL_BIND)");
+ break;
+
+ case CONSTRAINT_CPUSET:
+ mm = oom_kill_process(current, points,
+ "No available memory in cpuset");
+ break;
+
+ case CONSTRAINT_NONE:
retry:
- p = select_bad_process();
+ /*
+ * Rambo mode: Shoot down a process and hope it solves whatever
+ * issues we may have.
+ */
+ p = select_bad_process(&points);
- if (PTR_ERR(p) == -1UL)
- goto out;
+ if (PTR_ERR(p) == -1UL)
+ goto out;
- /* Found nothing?!?! Either we hang forever, or we panic. */
- if (!p) {
- read_unlock(&tasklist_lock);
- cpuset_unlock();
- panic("Out of memory and no killable processes...\n");
- }
+ /* Found nothing?!?! Either we hang forever, or we panic. */
+ if (!p) {
+ read_unlock(&tasklist_lock);
+ cpuset_unlock();
+ panic("Out of memory and no killable processes...\n");
+ }
- mm = oom_kill_process(p);
- if (!mm)
- goto retry;
+ mm = oom_kill_process(p, points, "Out of memory");
+ if (!mm)
+ goto retry;
+
+ break;
+ }
- out:
- read_unlock(&tasklist_lock);
+out:
cpuset_unlock();
if (mm)
mmput(mm);
if (page)
goto got_pg;
- out_of_memory(gfp_mask, order);
+ out_of_memory(zonelist, gfp_mask, order);
goto restart;
}
#include <linux/swapops.h>
#include <linux/mempolicy.h>
#include <linux/namei.h>
+#include <linux/ctype.h>
#include <asm/uaccess.h>
#include <asm/div64.h>
#include <asm/pgtable.h>
}
#ifdef CONFIG_NUMA
+static int shmem_parse_mpol(char *value, int *policy, nodemask_t *policy_nodes)
+{
+ char *nodelist = strchr(value, ':');
+ int err = 1;
+
+ if (nodelist) {
+ /* NUL-terminate policy string */
+ *nodelist++ = '\0';
+ if (nodelist_parse(nodelist, *policy_nodes))
+ goto out;
+ }
+ if (!strcmp(value, "default")) {
+ *policy = MPOL_DEFAULT;
+ /* Don't allow a nodelist */
+ if (!nodelist)
+ err = 0;
+ } else if (!strcmp(value, "prefer")) {
+ *policy = MPOL_PREFERRED;
+ /* Insist on a nodelist of one node only */
+ if (nodelist) {
+ char *rest = nodelist;
+ while (isdigit(*rest))
+ rest++;
+ if (!*rest)
+ err = 0;
+ }
+ } else if (!strcmp(value, "bind")) {
+ *policy = MPOL_BIND;
+ /* Insist on a nodelist */
+ if (nodelist)
+ err = 0;
+ } else if (!strcmp(value, "interleave")) {
+ *policy = MPOL_INTERLEAVE;
+ /* Default to nodes online if no nodelist */
+ if (!nodelist)
+ *policy_nodes = node_online_map;
+ err = 0;
+ }
+out:
+ /* Restore string for error message */
+ if (nodelist)
+ *--nodelist = ':';
+ return err;
+}
+
static struct page *shmem_swapin_async(struct shared_policy *p,
swp_entry_t entry, unsigned long idx)
{
return page;
}
#else
+static inline int shmem_parse_mpol(char *value, int *policy, nodemask_t *policy_nodes)
+{
+ return 1;
+}
+
static inline struct page *
shmem_swapin(struct shmem_inode_info *info,swp_entry_t entry,unsigned long idx)
{
{
char *this_char, *value, *rest;
- while ((this_char = strsep(&options, ",")) != NULL) {
+ while (options != NULL) {
+ this_char = options;
+ for (;;) {
+ /*
+ * NUL-terminate this option: unfortunately,
+ * mount options form a comma-separated list,
+ * but mpol's nodelist may also contain commas.
+ */
+ options = strchr(options, ',');
+ if (options == NULL)
+ break;
+ options++;
+ if (!isdigit(*options)) {
+ options[-1] = '\0';
+ break;
+ }
+ }
if (!*this_char)
continue;
if ((value = strchr(this_char,'=')) != NULL) {
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"mpol")) {
- if (!strcmp(value,"default"))
- *policy = MPOL_DEFAULT;
- else if (!strcmp(value,"preferred"))
- *policy = MPOL_PREFERRED;
- else if (!strcmp(value,"bind"))
- *policy = MPOL_BIND;
- else if (!strcmp(value,"interleave"))
- *policy = MPOL_INTERLEAVE;
- else
+ if (shmem_parse_mpol(value,policy,policy_nodes))
goto bad_val;
- } else if (!strcmp(this_char,"mpol_nodelist")) {
- nodelist_parse(value, *policy_nodes);
} else {
printk(KERN_ERR "tmpfs: Bad mount option %s\n",
this_char);
sc.swap_cluster_max = SWAP_CLUSTER_MAX;
cond_resched();
- p->flags |= PF_MEMALLOC;
+ /*
+ * We need to be able to allocate from the reserves for RECLAIM_SWAP
+ * and we also need to be able to write out pages for RECLAIM_WRITE
+ * and RECLAIM_SWAP.
+ */
+ p->flags |= PF_MEMALLOC | PF_SWAPWRITE;
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
* a long time.
*/
shrink_slab(sc.nr_scanned, gfp_mask, order);
- sc.nr_reclaimed = 1; /* Avoid getting the off node timeout */
}
p->reclaim_state = NULL;
- current->flags &= ~PF_MEMALLOC;
+ current->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE);
if (sc.nr_reclaimed == 0)
zone->last_unsuccessful_zone_reclaim = jiffies;
.dev = &__fake_net_device,
.path = &__fake_rtable.u.dst,
.metrics = {[RTAX_MTU - 1] = 1500},
+ .flags = DST_NOXFRM,
}
},
.rt_flags = 0,
C(pkt_type);
C(ip_summed);
C(priority);
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+ C(ipvs_property);
+#endif
C(protocol);
n->destructor = NULL;
#ifdef CONFIG_NETFILTER
C(nfct_reasm);
nf_conntrack_get_reasm(skb->nfct_reasm);
#endif
-#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
- C(ipvs_property);
-#endif
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
- C(nfct_reasm);
- nf_conntrack_get_reasm(skb->nfct_reasm);
-#endif
#ifdef CONFIG_BRIDGE_NETFILTER
C(nf_bridge);
nf_bridge_get(skb->nf_bridge);
saddr = dev->dev_addr;
memcpy(eth->h_source,saddr,dev->addr_len);
+ if(daddr)
+ {
+ memcpy(eth->h_dest,daddr,dev->addr_len);
+ return ETH_HLEN;
+ }
+
/*
* Anyway, the loopback-device should never use this function...
*/
return ETH_HLEN;
}
- if(daddr)
- {
- memcpy(eth->h_dest,daddr,dev->addr_len);
- return ETH_HLEN;
- }
-
return -ETH_HLEN;
}
} *inside;
struct ip_conntrack_tuple inner, target;
int hdrlen = (*pskb)->nh.iph->ihl * 4;
+ unsigned long statusbit;
if (!skb_make_writable(pskb, hdrlen + sizeof(*inside)))
return 0;
/* Change outer to look the reply to an incoming packet
* (proto 0 means don't invert per-proto part). */
+ if (manip == IP_NAT_MANIP_SRC)
+ statusbit = IPS_SRC_NAT;
+ else
+ statusbit = IPS_DST_NAT;
- /* Obviously, we need to NAT destination IP, but source IP
- should be NAT'ed only if it is from a NAT'd host.
+ /* Invert if this is reply dir. */
+ if (dir == IP_CT_DIR_REPLY)
+ statusbit ^= IPS_NAT_MASK;
- Explanation: some people use NAT for anonymizing. Also,
- CERT recommends dropping all packets from private IP
- addresses (although ICMP errors from internal links with
- such addresses are not too uncommon, as Alan Cox points
- out) */
- if (manip != IP_NAT_MANIP_SRC
- || ((*pskb)->nh.iph->saddr == ct->tuplehash[dir].tuple.src.ip)) {
+ if (ct->status & statusbit) {
invert_tuplepr(&target, &ct->tuplehash[!dir].tuple);
if (!manip_pkt(0, pskb, 0, &target, manip))
return 0;
const struct net_device *out,
int (*okfn)(struct sk_buff *))
{
- struct ip_conntrack *ct;
- enum ip_conntrack_info ctinfo;
unsigned int ret;
+ u_int32_t daddr = (*pskb)->nh.iph->daddr;
ret = ip_nat_fn(hooknum, pskb, in, out, okfn);
if (ret != NF_DROP && ret != NF_STOLEN
- && (ct = ip_conntrack_get(*pskb, &ctinfo)) != NULL) {
- enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
-
- if (ct->tuplehash[dir].tuple.dst.ip !=
- ct->tuplehash[!dir].tuple.src.ip) {
- dst_release((*pskb)->dst);
- (*pskb)->dst = NULL;
- }
+ && daddr != (*pskb)->nh.iph->daddr) {
+ dst_release((*pskb)->dst);
+ (*pskb)->dst = NULL;
}
return ret;
}
ct->tuplehash[!dir].tuple.src.ip
#ifdef CONFIG_XFRM
|| ct->tuplehash[dir].tuple.dst.u.all !=
- ct->tuplehash[dir].tuple.src.u.all
+ ct->tuplehash[!dir].tuple.src.u.all
#endif
)
return ip_route_me_harder(pskb) == 0 ? ret : NF_DROP;
int r;
rthp = rt_remove_balanced_route(
- &rt_hash_table[i].chain,
+ &rt_hash_table[k].chain,
rth,
&r);
goal -= r;
if (xdst->u.rt.fl.oif == fl->oif && /*XXX*/
xdst->u.rt.fl.fl4_dst == fl->fl4_dst &&
xdst->u.rt.fl.fl4_src == fl->fl4_src &&
+ xdst->u.rt.fl.fl4_tos == fl->fl4_tos &&
xfrm_bundle_ok(xdst, fl, AF_INET)) {
dst_clone(dst);
break;
.nl_u = {
.ip4_u = {
.saddr = local,
- .daddr = remote
+ .daddr = remote,
+ .tos = fl->fl4_tos
}
}
};
fl->proto = iph->protocol;
fl->fl4_dst = iph->daddr;
fl->fl4_src = iph->saddr;
+ fl->fl4_tos = iph->tos;
}
static inline int xfrm4_garbage_collect(void)
struct net_device *dev;
struct sk_buff *frag;
struct rt6_info *rt = (struct rt6_info*)skb->dst;
+ struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
struct ipv6hdr *tmp_hdr;
struct frag_hdr *fh;
unsigned int mtu, hlen, left, len;
hlen = ip6_find_1stfragopt(skb, &prevhdr);
nexthdr = *prevhdr;
- mtu = dst_mtu(&rt->u.dst) - hlen - sizeof(struct frag_hdr);
+ mtu = dst_mtu(&rt->u.dst);
+ if (np && np->frag_size < mtu) {
+ if (np->frag_size)
+ mtu = np->frag_size;
+ }
+ mtu -= hlen + sizeof(struct frag_hdr);
if (skb_shinfo(skb)->frag_list) {
int first_len = skb_pagelen(skb);
inet->cork.fl = *fl;
np->cork.hop_limit = hlimit;
np->cork.tclass = tclass;
- inet->cork.fragsize = mtu = dst_mtu(rt->u.dst.path);
+ mtu = dst_mtu(rt->u.dst.path);
+ if (np && np->frag_size < mtu) {
+ if (np->frag_size)
+ mtu = np->frag_size;
+ }
+ inet->cork.fragsize = mtu;
if (dst_allfrag(rt->u.dst.path))
inet->cork.flags |= IPCORK_ALLFRAG;
inet->cork.length = 0;
mtu = IPV6_MIN_MTU;
t->dev->mtu = mtu;
- if ((len = sizeof (*ipv6h) + ipv6h->payload_len) > mtu) {
+ if ((len = sizeof (*ipv6h) + ntohs(ipv6h->payload_len)) > mtu) {
rel_type = ICMPV6_PKT_TOOBIG;
rel_code = 0;
rel_info = mtu;
t->parms.encap_limit = p->encap_limit;
t->parms.flowinfo = p->flowinfo;
t->parms.link = p->link;
+ ip6_tnl_dst_reset(t);
ip6ip6_tnl_link_config(t);
return 0;
}
if (err < 0) {
x->km.state = XFRM_STATE_DEAD;
- xfrm_state_put(x);
+ __xfrm_state_put(x);
goto out;
}
int nx = 0;
int err;
u32 genid;
- u16 family = dst_orig->ops->family;
+ u16 family;
u8 dir = policy_to_flow_dir(XFRM_POLICY_OUT);
u32 sk_sid = security_sk_sid(sk, fl, dir);
restart:
if ((dst_orig->flags & DST_NOXFRM) || !xfrm_policy_list[XFRM_POLICY_OUT])
return 0;
- policy = flow_cache_lookup(fl, sk_sid, family, dir,
- xfrm_policy_lookup);
+ policy = flow_cache_lookup(fl, sk_sid, dst_orig->ops->family,
+ dir, xfrm_policy_lookup);
}
if (!policy)
return 0;
+ family = dst_orig->ops->family;
policy->curlft.use_time = (unsigned long)xtime.tv_sec;
switch (policy->action) {
* We can't enlist stable bundles either.
*/
write_unlock_bh(&policy->lock);
-
- xfrm_pol_put(policy);
if (dst)
dst_free(dst);
x->km.state = XFRM_STATE_DEAD;
spin_lock(&xfrm_state_lock);
list_del(&x->bydst);
- atomic_dec(&x->refcnt);
+ __xfrm_state_put(x);
if (x->id.spi) {
list_del(&x->byspi);
- atomic_dec(&x->refcnt);
+ __xfrm_state_put(x);
}
spin_unlock(&xfrm_state_lock);
if (del_timer(&x->timer))
- atomic_dec(&x->refcnt);
+ __xfrm_state_put(x);
/* The number two in this test is the reference
* mentioned in the comment below plus the reference
* The xfrm_state_alloc call gives a reference, and that
* is what we are dropping here.
*/
- atomic_dec(&x->refcnt);
+ __xfrm_state_put(x);
err = 0;
}
if (err < 0) {
x->km.state = XFRM_STATE_DEAD;
- xfrm_state_put(x);
+ __xfrm_state_put(x);
goto out;
}
int *countp)
{
struct snd_kcontrol *kctl;
- struct snd_ctl_elem_info info;
+ struct snd_ctl_elem_info *info;
int err;
down_read(&card->controls_rwsem);
up_read(&card->controls_rwsem);
return -ENXIO;
}
- info.id = *id;
- err = kctl->info(kctl, &info);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (info == NULL) {
+ up_read(&card->controls_rwsem);
+ return -ENOMEM;
+ }
+ info->id = *id;
+ err = kctl->info(kctl, info);
up_read(&card->controls_rwsem);
if (err >= 0) {
- err = info.type;
- *countp = info.count;
+ err = info->type;
+ *countp = info->count;
}
+ kfree(info);
return err;
}
void snd_opl3_free_seq_oss(struct snd_opl3 *opl3)
{
if (opl3->oss_seq_dev) {
- snd_device_free(opl3->card, opl3->oss_seq_dev);
+ /* The instance should have been released in prior */
opl3->oss_seq_dev = NULL;
}
}
}
/* MPU initialization */
if (acard->mpu && mpu_port[dev] > 0) {
- if (snd_cs423x_pnp_init_mpu(dev, acard->ctrl, cfg) < 0)
+ if (snd_cs423x_pnp_init_mpu(dev, acard->mpu, cfg) < 0)
goto error;
}
kfree(cfg);
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff