pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs

With commit 80cc3732 (pinctrl/at91: convert driver to use gpiolib irqchip)
gpiochip_set_chained_irqchip is called for PIOC, PIOD and PIOE. The
associated GPIO chip for the IRQ chip is overwritten each time, because
they share the same hard IRQ line.
Thus if an IRQ occurs on PIOC or PIOD, gpio_irq_handler will only check on
PIOE (the assigned GPIO chip) where no event occured. Thus the IRQ will
not be cleared, retriggering the ISR.
Fix that (like done before) by only set the PIOC GPIO chip to the IRQ chip
and walk the list in the irq handler.

Signed-off-by: Alexander Stein <alexanders83@web.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 84a9594a0caa0eef0809e5b1338aabe3824f2964..421493cb490c52a9f434df0ffd041c91c31536b9 100644 (file)
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1453,6 +1453,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
                                break;
                        at91_gpio = at91_gpio->next;
                        pio = at91_gpio->regbase;
+                       gpio_chip = &at91_gpio->chip;
                        continue;
                }
 
@@ -1468,6 +1469,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 static int at91_gpio_of_irq_setup(struct device_node *node,
                                  struct at91_gpio_chip *at91_gpio)
 {
+       struct at91_gpio_chip   *prev = NULL;
        struct irq_data         *d = irq_get_irq_data(at91_gpio->pioc_virq);
        int ret;
 
@@ -1493,6 +1495,17 @@ static int at91_gpio_of_irq_setup(struct device_node *node,
                panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n",
                        at91_gpio->pioc_idx);
 
+       /* Setup chained handler */
+       if (at91_gpio->pioc_idx)
+               prev = gpio_chips[at91_gpio->pioc_idx - 1];
+
+       /* The top level handler handles one bank of GPIOs, except
+        * on some SoC it can handle up to three...
+        * We only set up the handler for the first of the list.
+        */
+       if (prev && prev->next == at91_gpio)
+               return 0;
+
        /* Then register the chain on the parent IRQ */
        gpiochip_set_chained_irqchip(&at91_gpio->chip,
                                     &gpio_irqchip,