sgiioc4: coding style cleanup
authorSergei Shtylyov <sshtylyov@ru.mvista.com>
Mon, 15 Jun 2009 16:52:55 +0000 (18:52 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Mon, 15 Jun 2009 16:52:55 +0000 (18:52 +0200)
Fix several errors and warnings given by checkpatch.pl:

- space between the asterisk and parameter name;

- inconsistent spacing between operator and operands;

- space between *sizeof* and open parenthesis;

- #include <asm/io.h> instead of #include <linux/io.h>

- use of *typedef* instead of a structure tag;

- line over 80 characters.

In addition to these changes, also do the following:

- indent with tabs instead of spaces;

- put the function's result type and name/parameters on the same line;

- join back the needlessly broken lines;

- get rid of needless type cast in sgiioc4_checkirq();

- remove space between the type cast and the variable name;

- remove commented out field initializer;

- uppercase the acronyms, lowercase the normal words in the comments;

- fix up the multi-line comment style...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/sgiioc4.c

index 5f37f168f94446c0403a676c0ed0ba7e91b0514b..b7d61dc6409651f370cb02b22f2093244904bb5b 100644 (file)
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
- * Copyright (C) 2008 MontaVista Software, Inc.
+ * Copyright (C) 2008-2009 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License
@@ -29,8 +29,7 @@
 #include <linux/blkdev.h>
 #include <linux/scatterlist.h>
 #include <linux/ioc4.h>
-#include <asm/io.h>
-
+#include <linux/io.h>
 #include <linux/ide.h>
 
 #define DRV_NAME "SGIIOC4"
@@ -72,7 +71,7 @@
 #define IOC4_CMD_CTL_BLK_SIZE  0x20
 #define IOC4_SUPPORTED_FIRMWARE_REV 46
 
-typedef struct {
+struct ioc4_dma_regs {
        u32 timing_reg0;
        u32 timing_reg1;
        u32 low_mem_ptr;
@@ -82,17 +81,18 @@ typedef struct {
        u32 dev_byte_count;
        u32 mem_byte_count;
        u32 status;
-} ioc4_dma_regs_t;
+};
 
 /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
 /* IOC4 has only 1 IDE channel */
-#define IOC4_PRD_BYTES       16
-#define IOC4_PRD_ENTRIES     (PAGE_SIZE /(4*IOC4_PRD_BYTES))
+#define IOC4_PRD_BYTES         16
+#define IOC4_PRD_ENTRIES       (PAGE_SIZE / (4 * IOC4_PRD_BYTES))
 
 
-static void
-sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
-                       unsigned long ctrl_port, unsigned long irq_port)
+static void sgiioc4_init_hwif_ports(struct ide_hw *hw,
+                                   unsigned long data_port,
+                                   unsigned long ctrl_port,
+                                   unsigned long irq_port)
 {
        unsigned long reg = data_port;
        int i;
@@ -105,13 +105,11 @@ sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
        hw->io_ports.irq_addr = irq_port;
 }
 
-static int
-sgiioc4_checkirq(ide_hwif_t * hwif)
+static int sgiioc4_checkirq(ide_hwif_t *hwif)
 {
-       unsigned long intr_addr =
-               hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
+       unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
 
-       if ((u8)readl((void __iomem *)intr_addr) & 0x03)
+       if (readl((void __iomem *)intr_addr) & 0x03)
                return 1;
 
        return 0;
@@ -119,8 +117,7 @@ sgiioc4_checkirq(ide_hwif_t * hwif)
 
 static u8 sgiioc4_read_status(ide_hwif_t *);
 
-static int
-sgiioc4_clearirq(ide_drive_t * drive)
+static int sgiioc4_clearirq(ide_drive_t *drive)
 {
        u32 intr_reg;
        ide_hwif_t *hwif = drive->hwif;
@@ -158,12 +155,10 @@ sgiioc4_clearirq(ide_drive_t * drive)
                                readl((void __iomem *)(io_ports->irq_addr + 4));
                        pci_read_config_dword(dev, PCI_COMMAND,
                                              &pci_stat_cmd_reg);
-                       printk(KERN_ERR
-                              "%s(%s) : PCI Bus Error when doing DMA:"
-                                  " status-cmd reg is 0x%x\n",
+                       printk(KERN_ERR "%s(%s): PCI Bus Error when doing DMA: "
+                              "status-cmd reg is 0x%x\n",
                               __func__, drive->name, pci_stat_cmd_reg);
-                       printk(KERN_ERR
-                              "%s(%s) : PCI Error Address is 0x%x%x\n",
+                       printk(KERN_ERR "%s(%s): PCI Error Address is 0x%x%x\n",
                               __func__, drive->name,
                               pci_err_addr_high, pci_err_addr_low);
                        /* Clear the PCI Error indicator */
@@ -189,8 +184,7 @@ static void sgiioc4_dma_start(ide_drive_t *drive)
        writel(temp_reg, (void __iomem *)ioc4_dma_addr);
 }
 
-static u32
-sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
+static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
 {
        unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
        u32     ioc4_dma;
@@ -227,7 +221,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive)
        }
 
        /*
-        * The IOC4 will DMA 1's to the ending dma area to indicate that
+        * The IOC4 will DMA 1's to the ending DMA area to indicate that
         * previous data DMA is complete.  This is necessary because of relaxed
         * ordering between register reads and DMA writes on the Altix.
         */
@@ -265,7 +259,7 @@ static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
 }
 
-/* returns 1 if dma irq issued, 0 otherwise */
+/* Returns 1 if DMA IRQ issued, 0 otherwise */
 static int sgiioc4_dma_test_irq(ide_drive_t *drive)
 {
        return sgiioc4_checkirq(drive->hwif);
@@ -286,8 +280,7 @@ static void sgiioc4_resetproc(ide_drive_t *drive)
        sgiioc4_clearirq(drive);
 }
 
-static void
-sgiioc4_dma_lost_irq(ide_drive_t * drive)
+static void sgiioc4_dma_lost_irq(ide_drive_t *drive)
 {
        sgiioc4_resetproc(drive);
 
@@ -313,13 +306,13 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif)
        return reg;
 }
 
-/* Creates a dma map for the scatter-gather list entries */
-static int __devinit
-ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
+/* Creates a DMA map for the scatter-gather list entries */
+static int __devinit ide_dma_sgiioc4(ide_hwif_t *hwif,
+                                    const struct ide_port_info *d)
 {
        struct pci_dev *dev = to_pci_dev(hwif->dev);
        unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
-       int num_ports = sizeof (ioc4_dma_regs_t);
+       int num_ports = sizeof(struct ioc4_dma_regs);
        void *pad;
 
        printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
@@ -362,8 +355,7 @@ dma_pci_alloc_failure:
 }
 
 /* Initializes the IOC4 DMA Engine */
-static void
-sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
+static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t *drive)
 {
        u32 ioc4_dma;
        ide_hwif_t *hwif = drive->hwif;
@@ -374,31 +366,27 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
        ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 
        if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
-               printk(KERN_WARNING
-                       "%s(%s):Warning!! DMA from previous transfer was still active\n",
-                      __func__, drive->name);
+               printk(KERN_WARNING "%s(%s): Warning!! DMA from previous "
+                      "transfer was still active\n", __func__, drive->name);
                writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
                ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 
                if (ioc4_dma & IOC4_S_DMA_STOP)
-                       printk(KERN_ERR
-                              "%s(%s) : IOC4 Dma STOP bit is still 1\n",
-                              __func__, drive->name);
+                       printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
+                              "still 1\n", __func__, drive->name);
        }
 
        ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
        if (ioc4_dma & IOC4_S_DMA_ERROR) {
-               printk(KERN_WARNING
-                      "%s(%s) : Warning!! - DMA Error during Previous"
-                      " transfer | status 0x%x\n",
+               printk(KERN_WARNING "%s(%s): Warning!! DMA Error during "
+                      "previous transfer, status 0x%x\n",
                       __func__, drive->name, ioc4_dma);
                writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
                ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 
                if (ioc4_dma & IOC4_S_DMA_STOP)
-                       printk(KERN_ERR
-                              "%s(%s) : IOC4 DMA STOP bit is still 1\n",
-                              __func__, drive->name);
+                       printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
+                              "still 1\n", __func__, drive->name);
        }
 
        /* Address of the Scatter Gather List */
@@ -408,20 +396,22 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
        /* Address of the Ending DMA */
        memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
        ending_dma_addr = cpu_to_le32(hwif->extra_base);
-       writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
+       writel(ending_dma_addr, (void __iomem *)(dma_base +
+                                                IOC4_DMA_END_ADDR * 4));
 
        writel(dma_direction, (void __iomem *)ioc4_dma_addr);
 }
 
-/* IOC4 Scatter Gather list Format                                      */
+/* IOC4 Scatter Gather list Format                                      */
 /* 128 Bit entries to support 64 bit addresses in the future            */
 /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format     */
 /* --------------------------------------------------------------------- */
-/* | Upper 32 bits - Zero           |          Lower 32 bits- address | */
+/* | Upper 32 bits - Zero                    Lower 32 bits- address | */
 /* --------------------------------------------------------------------- */
 /* | Upper 32 bits - Zero          |EOL| 15 unused     | 16 Bit Length| */
 /* --------------------------------------------------------------------- */
-/* Creates the scatter gather list, DMA Table */
+/* Creates the scatter gather list, DMA Table                           */
+
 static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
        ide_hwif_t *hwif = drive->hwif;
@@ -448,8 +438,10 @@ static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
                                if (bcount > cur_len)
                                        bcount = cur_len;
 
-                               /* put the addr, length in
-                                * the IOC4 dma-table format */
+                               /*
+                                * Put the address, length in
+                                * the IOC4 dma-table format
+                                */
                                *table = 0x0;
                                table++;
                                *table = cpu_to_be32(cur_addr);
@@ -540,8 +532,7 @@ static const struct ide_port_info sgiioc4_port_info __devinitconst = {
        .mwdma_mask             = ATA_MWDMA2_ONLY,
 };
 
-static int __devinit
-sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
+static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 {
        unsigned long cmd_base, irqport;
        unsigned long bar0, cmd_phys_base, ctl;
@@ -549,7 +540,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
        struct ide_hw hw, *hws[] = { &hw };
        int rc;
 
-       /*  Get the CmdBlk and CtrlBlk Base Registers */
+       /* Get the CmdBlk and CtrlBlk base registers */
        bar0 = pci_resource_start(dev, 0);
        virt_base = pci_ioremap_bar(dev, 0);
        if (virt_base == NULL) {
@@ -557,9 +548,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
                                DRV_NAME, bar0);
                return -ENOMEM;
        }
-       cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
-       ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
-       irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
+       cmd_base = (unsigned long)virt_base + IOC4_CMD_OFFSET;
+       ctl = (unsigned long)virt_base + IOC4_CTRL_OFFSET;
+       irqport = (unsigned long)virt_base + IOC4_INTR_OFFSET;
 
        cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
        if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
@@ -577,7 +568,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
        hw.irq = dev->irq;
        hw.dev = &dev->dev;
 
-       /* Initializing chipset IRQ Registers */
+       /* Initialize chipset IRQ registers */
        writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
        rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
@@ -590,8 +581,7 @@ req_mem_rgn_err:
        return rc;
 }
 
-static unsigned int __devinit
-pci_init_sgiioc4(struct pci_dev *dev)
+static unsigned int __devinit pci_init_sgiioc4(struct pci_dev *dev)
 {
        int ret;
 
@@ -611,10 +601,10 @@ out:
        return ret;
 }
 
-int __devinit
-ioc4_ide_attach_one(struct ioc4_driver_data *idd)
+int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 {
-       /* PCI-RT does not bring out IDE connection.
+       /*
+        * PCI-RT does not bring out IDE connection.
         * Do not attach to this particular IOC4.
         */
        if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
@@ -627,7 +617,6 @@ static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
        .is_name = "IOC4_ide",
        .is_owner = THIS_MODULE,
        .is_probe = ioc4_ide_attach_one,
-/*     .is_remove = ioc4_ide_remove_one,       */
 };
 
 static int __init ioc4_ide_init(void)