ASoC: fsi: Fixup for master mode

This patch add hw_params to snd_soc_dai_ops,
because board specific set_rate is needed
when FSI was used as master mode.

This patch remove fsi_clk_ctrl from fsi_dai_startup,
because clock should be disabled before set_rate.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
index 3ecdb965b890c26aa8edd93e9d062dce7c859db1..2c6237e6c04598ebdd62980e5541162aa785e694 100644 (file)
--- a/include/sound/sh_fsi.h
+++ b/include/sound/sh_fsi.h
@@ -72,9 +72,41 @@
 #define SH_FSI_OFMT_TDM_DELAY_CH(x) \
        (SH_FSI_OFMT(TDM_DELAY) | SH_FSI_SET_CH_O(x))
 
+
+/*
+ * set_rate return value
+ *
+ * see ACKMD/BPFMD on
+ *     ACK_MD (FSI2)
+ *     CKG1   (FSI)
+ *
+ * err:  return value < 0
+ *
+ * 0x-00000AB
+ *
+ * A:  ACKMD value
+ * B:  BPFMD value
+ */
+
+#define SH_FSI_ACKMD_MASK      (0xF << 0)
+#define SH_FSI_ACKMD_512       (1 << 0)
+#define SH_FSI_ACKMD_256       (2 << 0)
+#define SH_FSI_ACKMD_128       (3 << 0)
+#define SH_FSI_ACKMD_64                (4 << 0)
+#define SH_FSI_ACKMD_32                (5 << 0)
+
+#define SH_FSI_BPFMD_MASK      (0xF << 4)
+#define SH_FSI_BPFMD_512       (1 << 4)
+#define SH_FSI_BPFMD_256       (2 << 4)
+#define SH_FSI_BPFMD_128       (3 << 4)
+#define SH_FSI_BPFMD_64                (4 << 4)
+#define SH_FSI_BPFMD_32                (5 << 4)
+#define SH_FSI_BPFMD_16                (6 << 4)
+
 struct sh_fsi_platform_info {
        unsigned long porta_flags;
        unsigned long portb_flags;
+       int (*set_rate)(int is_porta, int rate); /* for master mode */
 };
 
 extern struct snd_soc_dai fsi_soc_dai[2];

diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index e551ca45f03ee9e37738f7d89bfd7925af8f734d..a1ce6089177c708acbc39197316e444b6f99270e 100644 (file)
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -65,6 +65,10 @@
 #define ERR_UNDER      0x00000001
 #define ST_ERR         (ERR_OVER | ERR_UNDER)
 
+/* CKG1 */
+#define ACKMD_MASK     0x00007000
+#define BPFMD_MASK     0x00000700
+
 /* CLK_RST */
 #define B_CLK          0x00000010
 #define A_CLK          0x00000001
@@ -734,12 +738,6 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream,
        }
        fsi_reg_write(fsi, reg, data);
 
-       /*
-        * clear clk reset if master mode
-        */
-       if (is_master)
-               fsi_clk_ctrl(fsi, 1);
-
        /* irq clear */
        fsi_irq_disable(fsi, is_play);
        fsi_irq_clear_status(fsi);
@@ -786,10 +784,98 @@ static int fsi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
        return ret;
 }
 
+static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
+                            struct snd_pcm_hw_params *params,
+                            struct snd_soc_dai *dai)
+{
+       struct fsi_priv *fsi = fsi_get_priv(substream);
+       struct fsi_master *master = fsi_get_master(fsi);
+       int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+       int fsi_ver = master->core->ver;
+       int is_play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+       int ret;
+
+       /* if slave mode, set_rate is not needed */
+       if (!fsi_is_master_mode(fsi, is_play))
+               return 0;
+
+       /* it is error if no set_rate */
+       if (!set_rate)
+               return -EIO;
+
+       /* clock stop */
+       pm_runtime_put_sync(dai->dev);
+       fsi_clk_ctrl(fsi, 0);
+
+       ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+       if (ret > 0) {
+               u32 data = 0;
+
+               switch (ret & SH_FSI_ACKMD_MASK) {
+               default:
+                       /* FALL THROUGH */
+               case SH_FSI_ACKMD_512:
+                       data |= (0x0 << 12);
+                       break;
+               case SH_FSI_ACKMD_256:
+                       data |= (0x1 << 12);
+                       break;
+               case SH_FSI_ACKMD_128:
+                       data |= (0x2 << 12);
+                       break;
+               case SH_FSI_ACKMD_64:
+                       data |= (0x3 << 12);
+                       break;
+               case SH_FSI_ACKMD_32:
+                       if (fsi_ver < 2)
+                               dev_err(dai->dev, "unsupported ACKMD\n");
+                       else
+                               data |= (0x4 << 12);
+                       break;
+               }
+
+               switch (ret & SH_FSI_BPFMD_MASK) {
+               default:
+                       /* FALL THROUGH */
+               case SH_FSI_BPFMD_32:
+                       data |= (0x0 << 8);
+                       break;
+               case SH_FSI_BPFMD_64:
+                       data |= (0x1 << 8);
+                       break;
+               case SH_FSI_BPFMD_128:
+                       data |= (0x2 << 8);
+                       break;
+               case SH_FSI_BPFMD_256:
+                       data |= (0x3 << 8);
+                       break;
+               case SH_FSI_BPFMD_512:
+                       data |= (0x4 << 8);
+                       break;
+               case SH_FSI_BPFMD_16:
+                       if (fsi_ver < 2)
+                               dev_err(dai->dev, "unsupported ACKMD\n");
+                       else
+                               data |= (0x7 << 8);
+                       break;
+               }
+
+               fsi_reg_mask_set(fsi, CKG1, (ACKMD_MASK | BPFMD_MASK) , data);
+               udelay(10);
+               fsi_clk_ctrl(fsi, 1);
+               ret = 0;
+       }
+       pm_runtime_get_sync(dai->dev);
+
+       return ret;
+
+}
+
 static struct snd_soc_dai_ops fsi_dai_ops = {
        .startup        = fsi_dai_startup,
        .shutdown       = fsi_dai_shutdown,
        .trigger        = fsi_dai_trigger,
+       .hw_params      = fsi_dai_hw_params,
 };
 
 /************************************************************************