powerpc/64: Enable use of radix MMU under hypervisor on POWER9
authorPaul Mackerras <paulus@ozlabs.org>
Mon, 30 Jan 2017 10:21:36 +0000 (21:21 +1100)
committerMichael Ellerman <mpe@ellerman.id.au>
Tue, 31 Jan 2017 08:11:44 +0000 (19:11 +1100)
To use radix as a guest, we first need to tell the hypervisor via
the ibm,client-architecture call first that we support POWER9 and
architecture v3.00, and that we can do either radix or hash and
that we would like to choose later using an hcall (the
H_REGISTER_PROC_TBL hcall).

Then we need to check whether the hypervisor agreed to us using
radix.  We need to do this very early on in the kernel boot process
before any of the MMU initialization is done.  If the hypervisor
doesn't agree, we can't use radix and therefore clear the radix
MMU feature bit.

Later, when we have set up our process table, which points to the
radix tree for each process, we need to install that using the
H_REGISTER_PROC_TBL hcall.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
arch/powerpc/include/asm/book3s/64/mmu.h
arch/powerpc/include/asm/hvcall.h
arch/powerpc/include/asm/prom.h
arch/powerpc/kernel/prom_init.c
arch/powerpc/mm/init_64.c
arch/powerpc/mm/pgtable-radix.c
arch/powerpc/platforms/pseries/lpar.c

index 8afb0e00f7d9835baaeb7022102f46abdbe11a91..cea522c3bcae15324465fcac9f50fb2d536c45f2 100644 (file)
@@ -138,5 +138,11 @@ static inline void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 extern int (*register_process_table)(unsigned long base, unsigned long page_size,
                                     unsigned long tbl_size);
 
+#ifdef CONFIG_PPC_PSERIES
+extern void radix_init_pseries(void);
+#else
+static inline void radix_init_pseries(void) { };
+#endif
+
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_POWERPC_BOOK3S_64_MMU_H_ */
index 77ff1ba99d1f660991baad2a5f33c55a939aed4e..54d11b3a6bf706a31c069ba795a037c93a475a0f 100644 (file)
 #define H_GET_MPP_X            0x314
 #define H_SET_MODE             0x31C
 #define H_CLEAR_HPT            0x358
+#define H_REGISTER_PROC_TBL    0x37C
 #define H_SIGNAL_SYS_RESET     0x380
 #define MAX_HCALL_OPCODE       H_SIGNAL_SYS_RESET
 
 #define H_SIGNAL_SYS_RESET_ALL_OTHERS          -2
 /* >= 0 values are CPU number */
 
+/* Flag values used in H_REGISTER_PROC_TBL hcall */
+#define PROC_TABLE_OP_MASK     0x18
+#define PROC_TABLE_DEREG       0x10
+#define PROC_TABLE_NEW         0x18
+#define PROC_TABLE_TYPE_MASK   0x06
+#define PROC_TABLE_HPT_SLB     0x00
+#define PROC_TABLE_HPT_PT      0x02
+#define PROC_TABLE_RADIX       0x04
+#define PROC_TABLE_GTSE                0x01
+
 #ifndef __ASSEMBLY__
 
 /**
index e6d83d0fada7ea771eb1b137b6fb3c1a2341efc0..8af2546ea5932e8e1d00397795cbe00369c930e6 100644 (file)
@@ -121,6 +121,8 @@ struct of_drconf_cell {
 #define OV1_PPC_2_06           0x02    /* set if we support PowerPC 2.06 */
 #define OV1_PPC_2_07           0x01    /* set if we support PowerPC 2.07 */
 
+#define OV1_PPC_3_00           0x80    /* set if we support PowerPC 3.00 */
+
 /* Option vector 2: Open Firmware options supported */
 #define OV2_REAL_MODE          0x20    /* set if we want OF in real mode */
 
@@ -155,6 +157,13 @@ struct of_drconf_cell {
 #define OV5_PFO_HW_842         0x1140  /* PFO Compression Accelerator */
 #define OV5_PFO_HW_ENCR                0x1120  /* PFO Encryption Accelerator */
 #define OV5_SUB_PROCESSORS     0x1501  /* 1,2,or 4 Sub-Processors supported */
+#define OV5_XIVE_EXPLOIT       0x1701  /* XIVE exploitation supported */
+#define OV5_MMU_RADIX_300      0x1880  /* ISA v3.00 radix MMU supported */
+#define OV5_MMU_HASH_300       0x1840  /* ISA v3.00 hash MMU supported */
+#define OV5_MMU_SEGM_RADIX     0x1820  /* radix mode (no segmentation) */
+#define OV5_MMU_PROC_TBL       0x1810  /* hcall selects SLB or proc table */
+#define OV5_MMU_SLB            0x1800  /* always use SLB */
+#define OV5_MMU_GTSE           0x1808  /* Guest translation shootdown */
 
 /* Option Vector 6: IBM PAPR hints */
 #define OV6_LINUX              0x02    /* Linux is our OS */
index ec47a939cbdd6dd81c6c05ed6707f28e12d9f0ea..358d43f8f84fbe0bcd425e539872ddb8370e46cb 100644 (file)
@@ -649,6 +649,7 @@ static void __init early_cmdline_parse(void)
 struct option_vector1 {
        u8 byte1;
        u8 arch_versions;
+       u8 arch_versions3;
 } __packed;
 
 struct option_vector2 {
@@ -691,6 +692,9 @@ struct option_vector5 {
        u8 reserved2;
        __be16 reserved3;
        u8 subprocessors;
+       u8 byte22;
+       u8 intarch;
+       u8 mmu;
 } __packed;
 
 struct option_vector6 {
@@ -700,7 +704,7 @@ struct option_vector6 {
 } __packed;
 
 struct ibm_arch_vec {
-       struct { u32 mask, val; } pvrs[10];
+       struct { u32 mask, val; } pvrs[12];
 
        u8 num_vectors;
 
@@ -749,6 +753,14 @@ struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = {
                        .mask = cpu_to_be32(0xffff0000), /* POWER8 */
                        .val  = cpu_to_be32(0x004d0000),
                },
+               {
+                       .mask = cpu_to_be32(0xffff0000), /* POWER9 */
+                       .val  = cpu_to_be32(0x004e0000),
+               },
+               {
+                       .mask = cpu_to_be32(0xffffffff), /* all 3.00-compliant */
+                       .val  = cpu_to_be32(0x0f000005),
+               },
                {
                        .mask = cpu_to_be32(0xffffffff), /* all 2.07-compliant */
                        .val  = cpu_to_be32(0x0f000004),
@@ -774,6 +786,7 @@ struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = {
                .byte1 = 0,
                .arch_versions = OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
                                 OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07,
+               .arch_versions3 = OV1_PPC_3_00,
        },
 
        .vec2_len = VECTOR_LENGTH(sizeof(struct option_vector2)),
@@ -836,6 +849,9 @@ struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = {
                .reserved2 = 0,
                .reserved3 = 0,
                .subprocessors = 1,
+               .intarch = 0,
+               .mmu = OV5_FEAT(OV5_MMU_RADIX_300) | OV5_FEAT(OV5_MMU_HASH_300) |
+                       OV5_FEAT(OV5_MMU_PROC_TBL) | OV5_FEAT(OV5_MMU_GTSE),
        },
 
        /* option vector 6: IBM PAPR hints */
index 4d9481ec24683690773470b69aa2fcb25da88083..10c9a545a646940680e303c08c800e9b81a23d7e 100644 (file)
@@ -347,10 +347,9 @@ static int __init parse_disable_radix(char *p)
 early_param("disable_radix", parse_disable_radix);
 
 /*
- * If we're running under a hypervisor, we currently can't do radix
- * since we don't have the code to do the H_REGISTER_PROC_TBL hcall.
- * We tell that we're running under a hypervisor by looking for the
- * /chosen/ibm,architecture-vec-5 property.
+ * If we're running under a hypervisor, we need to check the contents of
+ * /chosen/ibm,architecture-vec-5 to see if the hypervisor is willing to do
+ * radix.  If not, we clear the radix feature bit so we fall back to hash.
  */
 static void early_check_vec5(void)
 {
@@ -365,7 +364,10 @@ static void early_check_vec5(void)
        vec5 = of_get_flat_dt_prop(chosen, "ibm,architecture-vec-5", &size);
        if (!vec5)
                return;
-       cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
+       if (size <= OV5_INDX(OV5_MMU_RADIX_300) ||
+           !(vec5[OV5_INDX(OV5_MMU_RADIX_300)] & OV5_FEAT(OV5_MMU_RADIX_300)))
+               /* Hypervisor doesn't support radix */
+               cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
 }
 
 void __init mmu_early_init_devtree(void)
index cfa53ccc8bafc908e80532a4a64e44ad358dffc7..94323c4ececccc32c68ef4e168d21d88f869e2bf 100644 (file)
@@ -401,6 +401,8 @@ void __init radix__early_init_mmu(void)
                mtspr(SPRN_LPCR, lpcr | LPCR_UPRT | LPCR_HR);
                radix_init_partition_table();
                radix_init_amor();
+       } else {
+               radix_init_pseries();
        }
 
        memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
index 5dc1c3c6e7165bad3a404aa4b4a9940ab873f959..0587655aea6996816e2d7d44779f69cc35946c7e 100644 (file)
@@ -609,6 +609,29 @@ static int __init disable_bulk_remove(char *str)
 
 __setup("bulk_remove=", disable_bulk_remove);
 
+/* Actually only used for radix, so far */
+static int pseries_lpar_register_process_table(unsigned long base,
+                       unsigned long page_size, unsigned long table_size)
+{
+       long rc;
+       unsigned long flags = PROC_TABLE_NEW;
+
+       if (radix_enabled())
+               flags |= PROC_TABLE_RADIX | PROC_TABLE_GTSE;
+       for (;;) {
+               rc = plpar_hcall_norets(H_REGISTER_PROC_TBL, flags, base,
+                                       page_size, table_size);
+               if (!H_IS_LONG_BUSY(rc))
+                       break;
+               mdelay(get_longbusy_msecs(rc));
+       }
+       if (rc != H_SUCCESS) {
+               pr_err("Failed to register process table (rc=%ld)\n", rc);
+               BUG();
+       }
+       return rc;
+}
+
 void __init hpte_init_pseries(void)
 {
        mmu_hash_ops.hpte_invalidate     = pSeries_lpar_hpte_invalidate;
@@ -622,6 +645,12 @@ void __init hpte_init_pseries(void)
        mmu_hash_ops.hugepage_invalidate = pSeries_lpar_hugepage_invalidate;
 }
 
+void radix_init_pseries(void)
+{
+       pr_info("Using radix MMU under hypervisor\n");
+       register_process_table = pseries_lpar_register_process_table;
+}
+
 #ifdef CONFIG_PPC_SMLPAR
 #define CMO_FREE_HINT_DEFAULT 1
 static int cmo_free_hint_flag = CMO_FREE_HINT_DEFAULT;