cfg80211: provide channel to join_mesh function
authorJohannes Berg <johannes.berg@intel.com>
Wed, 16 May 2012 21:50:20 +0000 (23:50 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Tue, 5 Jun 2012 19:32:18 +0000 (15:32 -0400)
Just like the AP mode patch, instead of setting
the channel and then joining the mesh network,
provide the channel to join the network on to
the join_mesh() function.

Like in AP mode, you can also give the channel
to the join-mesh nl80211 command now.

Unlike AP mode, it picks a default channel if
none was given.

As libertas uses mesh mode interfaces but has
no join_mesh callback and we can't simply break
it, keep some compatibility code for that case
and configure the channel directly for it.

In the non-libertas case, where we store the
channel until join, allow setting it while the
interface is down.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
include/net/cfg80211.h
net/mac80211/cfg.c
net/wireless/core.h
net/wireless/mesh.c
net/wireless/nl80211.c
net/wireless/wext-compat.c

index a54fb895f613d971a93a07e16545058ab3527a9b..4c90c44b8b75bef0ae78af760b76c78298d6999f 100644 (file)
@@ -831,6 +831,8 @@ struct mesh_config {
 
 /**
  * struct mesh_setup - 802.11s mesh setup configuration
+ * @channel: the channel to start the mesh network on
+ * @channel_type: the channel type to use
  * @mesh_id: the mesh ID
  * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
  * @sync_method: which synchronization method to use
@@ -845,6 +847,8 @@ struct mesh_config {
  * These parameters are fixed when the mesh is created.
  */
 struct mesh_setup {
+       struct ieee80211_channel *channel;
+       enum nl80211_channel_type channel_type;
        const u8 *mesh_id;
        u8 mesh_id_len;
        u8 sync_method;
index 8e9d525c46534c93530780906d48164936cd3118..f47af8b3185ea6a902fd957fc4075b3d6de1e5ce 100644 (file)
@@ -1598,6 +1598,12 @@ static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev,
        err = copy_mesh_setup(ifmsh, setup);
        if (err)
                return err;
+
+       err = ieee80211_set_channel(wiphy, dev, setup->channel,
+                                   setup->channel_type);
+       if (err)
+               return err;
+
        ieee80211_start_mesh(sdata);
 
        return 0;
index 8523f3878677518be3e46e3230903e2d90ba3ae0..1d3d24126946b33154d9bf8e71a6a14cdc16aa4b 100644 (file)
@@ -303,14 +303,17 @@ extern const struct mesh_config default_mesh_config;
 extern const struct mesh_setup default_mesh_setup;
 int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
                         struct net_device *dev,
-                        const struct mesh_setup *setup,
+                        struct mesh_setup *setup,
                         const struct mesh_config *conf);
 int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
                       struct net_device *dev,
-                      const struct mesh_setup *setup,
+                      struct mesh_setup *setup,
                       const struct mesh_config *conf);
 int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
                        struct net_device *dev);
+int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
+                          struct wireless_dev *wdev, int freq,
+                          enum nl80211_channel_type channel_type);
 
 /* MLME */
 int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
index 2749cb86b4625142d53fa44e6145a011012fb478..2e3b700eba327acb3138f0934c9f818cd7b64be4 100644 (file)
@@ -65,6 +65,9 @@ const struct mesh_config default_mesh_config = {
 };
 
 const struct mesh_setup default_mesh_setup = {
+       /* cfg80211_join_mesh() will pick a channel if needed */
+       .channel = NULL,
+       .channel_type = NL80211_CHAN_NO_HT,
        .sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
        .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
        .path_metric = IEEE80211_PATH_METRIC_AIRTIME,
@@ -75,7 +78,7 @@ const struct mesh_setup default_mesh_setup = {
 
 int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
                         struct net_device *dev,
-                        const struct mesh_setup *setup,
+                        struct mesh_setup *setup,
                         const struct mesh_config *conf)
 {
        struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -101,6 +104,51 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
        if (!rdev->ops->join_mesh)
                return -EOPNOTSUPP;
 
+       if (!setup->channel) {
+               /* if no channel explicitly given, use preset channel */
+               setup->channel = wdev->preset_chan;
+               setup->channel_type = wdev->preset_chantype;
+       }
+
+       if (!setup->channel) {
+               /* if we don't have that either, use the first usable channel */
+               enum ieee80211_band band;
+
+               for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+                       struct ieee80211_supported_band *sband;
+                       struct ieee80211_channel *chan;
+                       int i;
+
+                       sband = rdev->wiphy.bands[band];
+                       if (!sband)
+                               continue;
+
+                       for (i = 0; i < sband->n_channels; i++) {
+                               chan = &sband->channels[i];
+                               if (chan->flags & (IEEE80211_CHAN_NO_IBSS |
+                                                  IEEE80211_CHAN_PASSIVE_SCAN |
+                                                  IEEE80211_CHAN_DISABLED |
+                                                  IEEE80211_CHAN_RADAR))
+                                       continue;
+                               setup->channel = chan;
+                               break;
+                       }
+
+                       if (setup->channel)
+                               break;
+               }
+
+               /* no usable channel ... */
+               if (!setup->channel)
+                       return -EINVAL;
+
+               setup->channel_type = NL80211_CHAN_NO_HT;
+       }
+
+       if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, setup->channel,
+                                         setup->channel_type))
+               return -EINVAL;
+
        err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup);
        if (!err) {
                memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
@@ -112,7 +160,7 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 
 int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
                       struct net_device *dev,
-                      const struct mesh_setup *setup,
+                      struct mesh_setup *setup,
                       const struct mesh_config *conf)
 {
        struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -125,6 +173,45 @@ int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
        return err;
 }
 
+int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
+                          struct wireless_dev *wdev, int freq,
+                          enum nl80211_channel_type channel_type)
+{
+       struct ieee80211_channel *channel;
+
+       /*
+        * Workaround for libertas (only!), it puts the interface
+        * into mesh mode but doesn't implement join_mesh. Instead,
+        * it is configured via sysfs and then joins the mesh when
+        * you set the channel. Note that the libertas mesh isn't
+        * compatible with 802.11 mesh.
+        */
+       if (!rdev->ops->join_mesh) {
+               int err;
+
+               if (!netif_running(wdev->netdev))
+                       return -ENETDOWN;
+               wdev_lock(wdev);
+               err = cfg80211_set_freq(rdev, wdev, freq, channel_type);
+               wdev_unlock(wdev);
+
+               return err;
+       }
+
+       if (wdev->mesh_id_len)
+               return -EBUSY;
+
+       channel = rdev_freq_to_chan(rdev, freq, channel_type);
+       if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy,
+                                                     channel,
+                                                     channel_type)) {
+               return -EINVAL;
+       }
+       wdev->preset_chan = channel;
+       wdev->preset_chantype = channel_type;
+       return 0;
+}
+
 void cfg80211_notify_new_peer_candidate(struct net_device *dev,
                const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp)
 {
index 089a5204dad5aa4ce75e5853240f35340831bd71..b22f1f876881b6c174bbd7fc14079147daeac78b 100644 (file)
@@ -921,7 +921,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
                if (nla_put_u32(msg, i, NL80211_CMD_SET_WIPHY_NETNS))
                        goto nla_put_failure;
        }
-       if (dev->ops->set_channel || dev->ops->start_ap) {
+       if (dev->ops->set_channel || dev->ops->start_ap ||
+           dev->ops->join_mesh) {
                i++;
                if (nla_put_u32(msg, i, NL80211_CMD_SET_CHANNEL))
                        goto nla_put_failure;
@@ -1166,17 +1167,19 @@ static int parse_txq_params(struct nlattr *tb[],
 static bool nl80211_can_set_dev_channel(struct wireless_dev *wdev)
 {
        /*
-        * You can only set the channel explicitly for AP and
-        * mesh type interfaces; all others have their channel
-        * managed via their respective "establish a connection"
-        * command (connect, join, ...)
+        * You can only set the channel explicitly for WDS interfaces,
+        * all others have their channel managed via their respective
+        * "establish a connection" command (connect, join, ...)
+        *
+        * For AP/GO and mesh mode, the channel can be set with the
+        * channel userspace API, but is only stored and passed to the
+        * low-level driver when the AP starts or the mesh is joined.
+        * This is for backward compatibility, userspace can also give
+        * the channel in the start-ap or join-mesh commands instead.
         *
         * Monitors are special as they are normally slaved to
         * whatever else is going on, so they behave as though
         * you tried setting the wiphy channel itself.
-        *
-        * For AP/GO modes, it's only for compatibility, you can
-        * also give the channel to the start-AP command.
         */
        return !wdev ||
                wdev->iftype == NL80211_IFTYPE_AP ||
@@ -1246,6 +1249,9 @@ static int __nl80211_set_channel(struct cfg80211_registered_device *rdev,
                wdev->preset_chantype = channel_type;
                result = 0;
                break;
+       case NL80211_IFTYPE_MESH_POINT:
+               result = cfg80211_set_mesh_freq(rdev, wdev, freq, channel_type);
+               break;
        default:
                wdev_lock(wdev);
                result = cfg80211_set_freq(rdev, wdev, freq, channel_type);
@@ -1335,8 +1341,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
                result = 0;
 
                mutex_lock(&rdev->mtx);
-       } else if (netif_running(netdev) &&
-                  nl80211_can_set_dev_channel(netdev->ieee80211_ptr))
+       } else if (nl80211_can_set_dev_channel(netdev->ieee80211_ptr))
                wdev = netdev->ieee80211_ptr;
        else
                wdev = NULL;
@@ -6080,6 +6085,24 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
                        return err;
        }
 
+       if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
+               enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
+
+               if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE] &&
+                   !nl80211_valid_channel_type(info, &channel_type))
+                       return -EINVAL;
+
+               setup.channel = rdev_freq_to_chan(rdev,
+                       nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]),
+                       channel_type);
+               if (!setup.channel)
+                       return -EINVAL;
+               setup.channel_type = channel_type;
+       } else {
+               /* cfg80211_join_mesh() will sort it out */
+               setup.channel = NULL;
+       }
+
        return cfg80211_join_mesh(rdev, dev, &setup, &cfg);
 }
 
index b082fcc26f06f24790261374f0fda244956a9aa0..faeb03548aa45a1378904a5a09031ddaa6213c67 100644 (file)
@@ -796,7 +796,6 @@ static int cfg80211_wext_siwfreq(struct net_device *dev,
        case NL80211_IFTYPE_ADHOC:
                return cfg80211_ibss_wext_siwfreq(dev, info, wextfreq, extra);
        case NL80211_IFTYPE_MONITOR:
-       case NL80211_IFTYPE_MESH_POINT:
                freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
                if (freq < 0)
                        return freq;
@@ -808,6 +807,17 @@ static int cfg80211_wext_siwfreq(struct net_device *dev,
                wdev_unlock(wdev);
                mutex_unlock(&rdev->devlist_mtx);
                return err;
+       case NL80211_IFTYPE_MESH_POINT:
+               freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
+               if (freq < 0)
+                       return freq;
+               if (freq == 0)
+                       return -EINVAL;
+               mutex_lock(&rdev->devlist_mtx);
+               err = cfg80211_set_mesh_freq(rdev, wdev, freq,
+                                            NL80211_CHAN_NO_HT);
+               mutex_unlock(&rdev->devlist_mtx);
+               return err;
        default:
                return -EOPNOTSUPP;
        }