obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
ath9k_common-y:= common.o \
- common-init.o
+ common-init.o \
+ common-beacon.o
ath9k_htc-y += htc_hst.o \
hif_usb.o \
ath9k_beacon_init(sc, nexttbtt, intval, false);
}
-/*
- * This sets up the beacon timers according to the timestamp of the last
- * received beacon and the current TSF, configures PCF and DTIM
- * handling, programs the sleep registers so the hardware will wakeup in
- * time to receive beacons, and configures the beacon miss handling so
- * we'll receive a BMISS interrupt when we stop seeing beacons from the AP
- * we've associated with.
- */
-static void ath9k_beacon_config_sta(struct ath_softc *sc,
+static void ath9k_beacon_config_sta(struct ath_hw *ah,
struct ath_beacon_config *conf)
{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_beacon_state bs;
- int dtim_intval;
- u32 nexttbtt = 0, intval;
- u64 tsf;
- /* No need to configure beacon if we are not associated */
- if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
- ath_dbg(common, BEACON,
- "STA is not yet associated..skipping beacon config\n");
+ if (ath9k_cmn_beacon_config_sta(ah, conf, &bs) == -EPERM)
return;
- }
-
- memset(&bs, 0, sizeof(bs));
- intval = conf->beacon_interval;
-
- /*
- * Setup dtim parameters according to
- * last beacon we received (which may be none).
- */
- dtim_intval = intval * conf->dtim_period;
-
- /*
- * Pull nexttbtt forward to reflect the current
- * TSF and calculate dtim state for the result.
- */
- tsf = ath9k_hw_gettsf64(ah);
- nexttbtt = ath9k_get_next_tbtt(sc, tsf, intval);
-
- bs.bs_intval = TU_TO_USEC(intval);
- bs.bs_dtimperiod = conf->dtim_period * bs.bs_intval;
- bs.bs_nexttbtt = nexttbtt;
- bs.bs_nextdtim = nexttbtt;
- if (conf->dtim_period > 1)
- bs.bs_nextdtim = ath9k_get_next_tbtt(sc, tsf, dtim_intval);
-
- /*
- * Calculate the number of consecutive beacons to miss* before taking
- * a BMISS interrupt. The configuration is specified in TU so we only
- * need calculate based on the beacon interval. Note that we clamp the
- * result to at most 15 beacons.
- */
- bs.bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, intval);
- if (bs.bs_bmissthreshold > 15)
- bs.bs_bmissthreshold = 15;
- else if (bs.bs_bmissthreshold <= 0)
- bs.bs_bmissthreshold = 1;
-
- /*
- * Calculate sleep duration. The configuration is given in ms.
- * We ensure a multiple of the beacon period is used. Also, if the sleep
- * duration is greater than the DTIM period then it makes senses
- * to make it a multiple of that.
- *
- * XXX fixed at 100ms
- */
-
- bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
- intval));
- if (bs.bs_sleepduration > bs.bs_dtimperiod)
- bs.bs_sleepduration = bs.bs_dtimperiod;
-
- /* TSF out of range threshold fixed at 1 second */
- bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
-
- ath_dbg(common, BEACON, "bmiss: %u sleep: %u\n",
- bs.bs_bmissthreshold, bs.bs_sleepduration);
-
- /* Set the computed STA beacon timers */
ath9k_hw_disable_interrupts(ah);
ath9k_hw_set_sta_beacon_timers(ah, &bs);
ath9k_beacon_config_adhoc(sc, cur_conf);
break;
case NL80211_IFTYPE_STATION:
- ath9k_beacon_config_sta(sc, cur_conf);
+ ath9k_beacon_config_sta(sc->sc_ah, cur_conf);
break;
default:
ath_dbg(common, CONFIG, "Unsupported beaconing mode\n");
--- /dev/null
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "common.h"
+
+#define FUDGE 2
+
+/* Calculate the modulo of a 64 bit TSF snapshot with a TU divisor */
+static u32 ath9k_mod_tsf64_tu(u64 tsf, u32 div_tu)
+{
+ u32 tsf_mod, tsf_hi, tsf_lo, mod_hi, mod_lo;
+
+ tsf_mod = tsf & (BIT(10) - 1);
+ tsf_hi = tsf >> 32;
+ tsf_lo = ((u32) tsf) >> 10;
+
+ mod_hi = tsf_hi % div_tu;
+ mod_lo = ((mod_hi << 22) + tsf_lo) % div_tu;
+
+ return (mod_lo << 10) | tsf_mod;
+}
+
+static u32 ath9k_get_next_tbtt(struct ath_hw *ah, u64 tsf,
+ unsigned int interval)
+{
+ unsigned int offset;
+
+ tsf += TU_TO_USEC(FUDGE + ah->config.sw_beacon_response_time);
+ offset = ath9k_mod_tsf64_tu(tsf, interval);
+
+ return (u32) tsf + TU_TO_USEC(interval) - offset;
+}
+
+/*
+ * This sets up the beacon timers according to the timestamp of the last
+ * received beacon and the current TSF, configures PCF and DTIM
+ * handling, programs the sleep registers so the hardware will wakeup in
+ * time to receive beacons, and configures the beacon miss handling so
+ * we'll receive a BMISS interrupt when we stop seeing beacons from the AP
+ * we've associated with.
+ */
+int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
+ struct ath_beacon_config *conf,
+ struct ath9k_beacon_state *bs)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ int dtim_intval;
+ u64 tsf;
+
+ /* No need to configure beacon if we are not associated */
+ if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
+ ath_dbg(common, BEACON,
+ "STA is not yet associated..skipping beacon config\n");
+ return -EPERM;
+ }
+
+ memset(bs, 0, sizeof(*bs));
+ conf->intval = conf->beacon_interval;
+
+ /*
+ * Setup dtim parameters according to
+ * last beacon we received (which may be none).
+ */
+ dtim_intval = conf->intval * conf->dtim_period;
+
+ /*
+ * Pull nexttbtt forward to reflect the current
+ * TSF and calculate dtim state for the result.
+ */
+ tsf = ath9k_hw_gettsf64(ah);
+ conf->nexttbtt = ath9k_get_next_tbtt(ah, tsf, conf->intval);
+
+ bs->bs_intval = TU_TO_USEC(conf->intval);
+ bs->bs_dtimperiod = conf->dtim_period * bs->bs_intval;
+ bs->bs_nexttbtt = conf->nexttbtt;
+ bs->bs_nextdtim = conf->nexttbtt;
+ if (conf->dtim_period > 1)
+ bs->bs_nextdtim = ath9k_get_next_tbtt(ah, tsf, dtim_intval);
+
+ /*
+ * Calculate the number of consecutive beacons to miss* before taking
+ * a BMISS interrupt. The configuration is specified in TU so we only
+ * need calculate based on the beacon interval. Note that we clamp the
+ * result to at most 15 beacons.
+ */
+ bs->bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, conf->intval);
+ if (bs->bs_bmissthreshold > 15)
+ bs->bs_bmissthreshold = 15;
+ else if (bs->bs_bmissthreshold <= 0)
+ bs->bs_bmissthreshold = 1;
+
+ /*
+ * Calculate sleep duration. The configuration is given in ms.
+ * We ensure a multiple of the beacon period is used. Also, if the sleep
+ * duration is greater than the DTIM period then it makes senses
+ * to make it a multiple of that.
+ *
+ * XXX fixed at 100ms
+ */
+
+ bs->bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
+ conf->intval));
+ if (bs->bs_sleepduration > bs->bs_dtimperiod)
+ bs->bs_sleepduration = bs->bs_dtimperiod;
+
+ /* TSF out of range threshold fixed at 1 second */
+ bs->bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
+
+ ath_dbg(common, BEACON, "bmiss: %u sleep: %u\n",
+ bs->bs_bmissthreshold, bs->bs_sleepduration);
+ return 0;
+}
+EXPORT_SYMBOL(ath9k_cmn_beacon_config_sta);
--- /dev/null
+/*
+ * Copyright (c) 2009-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+struct ath_beacon_config;
+
+int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
+ struct ath_beacon_config *conf,
+ struct ath9k_beacon_state *bs);
#include "hw-ops.h"
#include "common-init.h"
+#include "common-beacon.h"
/* Common header for Atheros 802.11n base driver cores */
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff