V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setup
authorHans Verkuil <hverkuil@xs4all.nl>
Thu, 17 Jul 2008 14:08:40 +0000 (11:08 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Sun, 20 Jul 2008 10:28:00 +0000 (07:28 -0300)
cx25840_vbi_setup has nothing to do with setting up VBI, but everything
with setting up the standard. Move to cx25840-core.c and rename.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/cx25840/cx25840-core.c
drivers/media/video/cx25840/cx25840-core.h
drivers/media/video/cx25840/cx25840-vbi.c

index 8d5f25caf01b7c315b5b2d28a4ae3f45a07a0cba..120c498cb60ca08d55a9f29d995552d8ffadc6bd 100644 (file)
@@ -237,7 +237,7 @@ static void cx25840_initialize(struct i2c_client *client)
        cx25840_write(client, 0x8d3, 0x1f);
        cx25840_write(client, 0x8e3, 0x03);
 
-       cx25840_vbi_setup(client);
+       cx25840_std_setup(client);
 
        /* trial and error says these are needed to get audio */
        cx25840_write(client, 0x914, 0xa0);
@@ -337,7 +337,7 @@ static void cx23885_initialize(struct i2c_client *client)
        finish_wait(&state->fw_wait, &wait);
        destroy_workqueue(q);
 
-       cx25840_vbi_setup(client);
+       cx25840_std_setup(client);
 
        /* (re)set input */
        set_input(client, state->vid_input, state->aud_input);
@@ -348,6 +348,153 @@ static void cx23885_initialize(struct i2c_client *client)
 
 /* ----------------------------------------------------------------------- */
 
+void cx25840_std_setup(struct i2c_client *client)
+{
+       struct cx25840_state *state = i2c_get_clientdata(client);
+       v4l2_std_id std = state->std;
+       int hblank, hactive, burst, vblank, vactive, sc;
+       int vblank656, src_decimation;
+       int luma_lpf, uv_lpf, comb;
+       u32 pll_int, pll_frac, pll_post;
+
+       /* datasheet startup, step 8d */
+       if (std & ~V4L2_STD_NTSC)
+               cx25840_write(client, 0x49f, 0x11);
+       else
+               cx25840_write(client, 0x49f, 0x14);
+
+       if (std & V4L2_STD_625_50) {
+               hblank = 132;
+               hactive = 720;
+               burst = 93;
+               vblank = 36;
+               vactive = 580;
+               vblank656 = 40;
+               src_decimation = 0x21f;
+               luma_lpf = 2;
+
+               if (std & V4L2_STD_SECAM) {
+                       uv_lpf = 0;
+                       comb = 0;
+                       sc = 0x0a425f;
+               } else if (std == V4L2_STD_PAL_Nc) {
+                       uv_lpf = 1;
+                       comb = 0x20;
+                       sc = 556453;
+               } else {
+                       uv_lpf = 1;
+                       comb = 0x20;
+                       sc = 688739;
+               }
+       } else {
+               hactive = 720;
+               hblank = 122;
+               vactive = 487;
+               luma_lpf = 1;
+               uv_lpf = 1;
+
+               src_decimation = 0x21f;
+               if (std == V4L2_STD_PAL_60) {
+                       vblank = 26;
+                       vblank656 = 26;
+                       burst = 0x5b;
+                       luma_lpf = 2;
+                       comb = 0x20;
+                       sc = 688739;
+               } else if (std == V4L2_STD_PAL_M) {
+                       vblank = 20;
+                       vblank656 = 24;
+                       burst = 0x61;
+                       comb = 0x20;
+                       sc = 555452;
+               } else {
+                       vblank = 26;
+                       vblank656 = 26;
+                       burst = 0x5b;
+                       comb = 0x66;
+                       sc = 556063;
+               }
+       }
+
+       /* DEBUG: Displays configured PLL frequency */
+       pll_int = cx25840_read(client, 0x108);
+       pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff;
+       pll_post = cx25840_read(client, 0x109);
+       v4l_dbg(1, cx25840_debug, client,
+                               "PLL regs = int: %u, frac: %u, post: %u\n",
+                               pll_int, pll_frac, pll_post);
+
+       if (pll_post) {
+               int fin, fsc;
+               int pll = (28636363L * ((((u64)pll_int) << 25L) + pll_frac)) >> 25L;
+
+               pll /= pll_post;
+               v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
+                               pll / 1000000, pll % 1000000);
+               v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
+                               pll / 8000000, (pll / 8) % 1000000);
+
+               fin = ((u64)src_decimation * pll) >> 12;
+               v4l_dbg(1, cx25840_debug, client,
+                               "ADC Sampling freq = %d.%06d MHz\n",
+                               fin / 1000000, fin % 1000000);
+
+               fsc = (((u64)sc) * pll) >> 24L;
+               v4l_dbg(1, cx25840_debug, client,
+                               "Chroma sub-carrier freq = %d.%06d MHz\n",
+                               fsc / 1000000, fsc % 1000000);
+
+               v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
+                       "vblank %i, vactive %i, vblank656 %i, src_dec %i, "
+                       "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, "
+                       "sc 0x%06x\n",
+                       hblank, hactive, vblank, vactive, vblank656,
+                       src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
+       }
+
+       /* Sets horizontal blanking delay and active lines */
+       cx25840_write(client, 0x470, hblank);
+       cx25840_write(client, 0x471,
+                       0xff & (((hblank >> 8) & 0x3) | (hactive << 4)));
+       cx25840_write(client, 0x472, hactive >> 4);
+
+       /* Sets burst gate delay */
+       cx25840_write(client, 0x473, burst);
+
+       /* Sets vertical blanking delay and active duration */
+       cx25840_write(client, 0x474, vblank);
+       cx25840_write(client, 0x475,
+                       0xff & (((vblank >> 8) & 0x3) | (vactive << 4)));
+       cx25840_write(client, 0x476, vactive >> 4);
+       cx25840_write(client, 0x477, vblank656);
+
+       /* Sets src decimation rate */
+       cx25840_write(client, 0x478, 0xff & src_decimation);
+       cx25840_write(client, 0x479, 0xff & (src_decimation >> 8));
+
+       /* Sets Luma and UV Low pass filters */
+       cx25840_write(client, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30));
+
+       /* Enables comb filters */
+       cx25840_write(client, 0x47b, comb);
+
+       /* Sets SC Step*/
+       cx25840_write(client, 0x47c, sc);
+       cx25840_write(client, 0x47d, 0xff & sc >> 8);
+       cx25840_write(client, 0x47e, 0xff & sc >> 16);
+
+       /* Sets VBI parameters */
+       if (std & V4L2_STD_625_50) {
+               cx25840_write(client, 0x47f, 0x01);
+               state->vbi_line_offset = 5;
+       } else {
+               cx25840_write(client, 0x47f, 0x00);
+               state->vbi_line_offset = 8;
+       }
+}
+
+/* ----------------------------------------------------------------------- */
+
 static void input_change(struct i2c_client *client)
 {
        struct cx25840_state *state = i2c_get_clientdata(client);
@@ -565,7 +712,7 @@ static int set_v4lstd(struct i2c_client *client)
        }
        cx25840_and_or(client, 0x400, ~0xf, fmt);
        cx25840_and_or(client, 0x403, ~0x3, pal_m);
-       cx25840_vbi_setup(client);
+       cx25840_std_setup(client);
        if (!state->is_cx25836)
                input_change(client);
        return 0;
index 8bf797f48b09d0779d7f7a6423dc0a29954bbf7b..27d8e52cd67e8db6d655685d0df76db6ab824e87 100644 (file)
@@ -61,6 +61,7 @@ int cx25840_write4(struct i2c_client *client, u16 addr, u32 value);
 u8 cx25840_read(struct i2c_client *client, u16 addr);
 u32 cx25840_read4(struct i2c_client *client, u16 addr);
 int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value);
+void cx25840_std_setup(struct i2c_client *client);
 
 /* ----------------------------------------------------------------------- */
 /* cx25850-firmware.c                                                      */
@@ -73,7 +74,6 @@ void cx25840_audio_set_path(struct i2c_client *client);
 
 /* ----------------------------------------------------------------------- */
 /* cx25850-vbi.c                                                           */
-void cx25840_vbi_setup(struct i2c_client *client);
 int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg);
 
 #endif
index c754b9d13369f580e1b6a02fd8da07dcdc414e42..69f2bbdbb929b1a9c41dad93cdfa97caca0d9122 100644 (file)
@@ -82,150 +82,6 @@ static int decode_vps(u8 * dst, u8 * p)
        return err & 0xf0;
 }
 
-void cx25840_vbi_setup(struct i2c_client *client)
-{
-       struct cx25840_state *state = i2c_get_clientdata(client);
-       v4l2_std_id std = state->std;
-       int hblank,hactive,burst,vblank,vactive,sc,vblank656,src_decimation;
-       int luma_lpf,uv_lpf, comb;
-       u32 pll_int,pll_frac,pll_post;
-
-       /* datasheet startup, step 8d */
-       if (std & ~V4L2_STD_NTSC) {
-               cx25840_write(client, 0x49f, 0x11);
-       } else {
-               cx25840_write(client, 0x49f, 0x14);
-       }
-
-       if (std & V4L2_STD_625_50) {
-               hblank=0x084;
-               hactive=0x2d0;
-               burst=0x5d;
-               vblank=0x024;
-               vactive=0x244;
-               vblank656=0x28;
-               src_decimation=0x21f;
-
-               luma_lpf=2;
-               if (std & V4L2_STD_SECAM) {
-                       uv_lpf=0;
-                       comb=0;
-                       sc=0x0a425f;
-               } else if (std == V4L2_STD_PAL_Nc) {
-                       uv_lpf=1;
-                       comb=0x20;
-                       sc=556453;
-               } else {
-                       uv_lpf=1;
-                       comb=0x20;
-                       sc=0x0a8263;
-               }
-       } else {
-               hactive=720;
-               hblank=122;
-               vactive=487;
-               luma_lpf=1;
-               uv_lpf=1;
-
-               src_decimation=0x21f;
-               if (std == V4L2_STD_PAL_60) {
-                       vblank=26;
-                       vblank656=26;
-                       burst=0x5b;
-                       luma_lpf=2;
-                       comb=0x20;
-                       sc=0x0a8263;
-               } else if (std == V4L2_STD_PAL_M) {
-                       vblank=20;
-                       vblank656=24;
-                       burst=0x61;
-                       comb=0x20;
-
-                       sc=555452;
-               } else {
-                       vblank=26;
-                       vblank656=26;
-                       burst=0x5b;
-                       comb=0x66;
-                       sc=556063;
-               }
-       }
-
-       /* DEBUG: Displays configured PLL frequency */
-       pll_int=cx25840_read(client, 0x108);
-       pll_frac=cx25840_read4(client, 0x10c)&0x1ffffff;
-       pll_post=cx25840_read(client, 0x109);
-       v4l_dbg(1, cx25840_debug, client,
-                               "PLL regs = int: %u, frac: %u, post: %u\n",
-                               pll_int,pll_frac,pll_post);
-
-       if (pll_post) {
-               int fin, fsc;
-               int pll= (28636363L*((((u64)pll_int)<<25L)+pll_frac)) >>25L;
-
-               pll/=pll_post;
-               v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
-                                               pll/1000000, pll%1000000);
-               v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
-                                               pll/8000000, (pll/8)%1000000);
-
-               fin=((u64)src_decimation*pll)>>12;
-               v4l_dbg(1, cx25840_debug, client, "ADC Sampling freq = "
-                                               "%d.%06d MHz\n",
-                                               fin/1000000,fin%1000000);
-
-               fsc= (((u64)sc)*pll) >> 24L;
-               v4l_dbg(1, cx25840_debug, client, "Chroma sub-carrier freq = "
-                                               "%d.%06d MHz\n",
-                                               fsc/1000000,fsc%1000000);
-
-               v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
-                       "vblank %i, vactive %i, vblank656 %i, src_dec %i, "
-                       "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x,"
-                       " sc 0x%06x\n",
-                       hblank, hactive, vblank, vactive, vblank656,
-                       src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
-       }
-
-       /* Sets horizontal blanking delay and active lines */
-       cx25840_write(client, 0x470, hblank);
-       cx25840_write(client, 0x471, 0xff&(((hblank>>8)&0x3)|(hactive <<4)));
-       cx25840_write(client, 0x472, hactive>>4);
-
-       /* Sets burst gate delay */
-       cx25840_write(client, 0x473, burst);
-
-       /* Sets vertical blanking delay and active duration */
-       cx25840_write(client, 0x474, vblank);
-       cx25840_write(client, 0x475, 0xff&(((vblank>>8)&0x3)|(vactive <<4)));
-       cx25840_write(client, 0x476, vactive>>4);
-       cx25840_write(client, 0x477, vblank656);
-
-       /* Sets src decimation rate */
-       cx25840_write(client, 0x478, 0xff&src_decimation);
-       cx25840_write(client, 0x479, 0xff&(src_decimation>>8));
-
-       /* Sets Luma and UV Low pass filters */
-       cx25840_write(client, 0x47a, luma_lpf<<6|((uv_lpf<<4)&0x30));
-
-       /* Enables comb filters */
-       cx25840_write(client, 0x47b, comb);
-
-       /* Sets SC Step*/
-       cx25840_write(client, 0x47c, sc);
-       cx25840_write(client, 0x47d, 0xff&sc>>8);
-       cx25840_write(client, 0x47e, 0xff&sc>>16);
-
-       /* Sets VBI parameters */
-       if (std & V4L2_STD_625_50) {
-               cx25840_write(client, 0x47f, 0x01);
-               state->vbi_line_offset = 5;
-       } else {
-               cx25840_write(client, 0x47f, 0x00);
-               state->vbi_line_offset = 8;
-       }
-}
-
 int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
 {
        struct cx25840_state *state = i2c_get_clientdata(client);
@@ -292,8 +148,8 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
                        /* raw VBI */
                        memset(svbi, 0, sizeof(*svbi));
 
-                       /* Setup VBI */
-                       cx25840_vbi_setup(client);
+                       /* Setup standard */
+                       cx25840_std_setup(client);
 
                        /* VBI Offset */
                        cx25840_write(client, 0x47f, vbi_offset);
@@ -304,8 +160,8 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
                for (x = 0; x <= 23; x++)
                        lcr[x] = 0x00;
 
-               /* Setup VBI */
-               cx25840_vbi_setup(client);
+               /* Setup standard */
+               cx25840_std_setup(client);
 
                /* Sliced VBI */
                cx25840_write(client, 0x404, 0x32);     /* Ancillary data */