alim15x3: fix CD_ROM DMA and PIO FIFO settings setup

* Setup CD_ROM DMA and PIO FIFO settings in init_chipset_ali15x3() instead
  of ata66_ali15x3().  The latter is called from init_hwif_common_ali15x3()
  only if DMA base exists (which insists m5529_revision > 0x20).

  This changes makes CD_ROM DMA / PIO FIFO bits being set only once
  and also when "idex=ata66" kernel parameter is used.

* While at it move also chip_is_1543c_e setup from ata66_ali15x3() to
  init_chipset_ali15x3() and check if isa_dev exists before accessing it.

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 8ee2b48d105d8c2a6c1ffc51280478b82b757576..1ab769b31e6476d35e84f87ede0e7757ade702ad 100644 (file)
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/alim15x3.c            Version 0.27    Aug 27 2007
+ * linux/drivers/ide/pci/alim15x3.c            Version 0.28    Sep 15 2007
  *
  *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
  *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
@@ -492,6 +492,13 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c
                 * clear bit 7
                 */
                pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F);
+               /*
+                * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010
+                */
+               if (m5229_revision >= 0x20 && isa_dev) {
+                       pci_read_config_byte(isa_dev, 0x5e, &tmpbyte);
+                       chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0;
+               }
                goto out;
        }
 
@@ -537,7 +544,30 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c
                        pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02);
                }
        }
+
 out:
+       /*
+        * CD_ROM DMA on (m5229, 0x53, bit0)
+        *      Enable this bit even if we want to use PIO.
+        * PIO FIFO off (m5229, 0x53, bit1)
+        *      The hardware will use 0x54h and 0x55h to control PIO FIFO.
+        *      (Not on later devices it seems)
+        *
+        *      0x53 changes meaning on later revs - we must no touch
+        *      bit 1 on them.  Need to check if 0x20 is the right break.
+        */
+       if (m5229_revision >= 0x20) {
+               pci_read_config_byte(dev, 0x53, &tmpbyte);
+
+               if (m5229_revision <= 0x20)
+                       tmpbyte = (tmpbyte & (~0x02)) | 0x01;
+               else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
+                       tmpbyte |= 0x03;
+               else
+                       tmpbyte |= 0x01;
+
+               pci_write_config_byte(dev, 0x53, tmpbyte);
+       }
        pci_dev_put(north);
        pci_dev_put(isa_dev);
        local_irq_restore(flags);
@@ -616,36 +646,8 @@ static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
                        if ((tmpbyte & (1 << hwif->channel)) == 0)
                                cbl = ATA_CBL_PATA80;
                }
-       } else {
-               /*
-                * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010
-                */
-               pci_read_config_byte(isa_dev, 0x5e, &tmpbyte);
-               chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0;
        }
 
-       /*
-        * CD_ROM DMA on (m5229, 0x53, bit0)
-        *      Enable this bit even if we want to use PIO
-        * PIO FIFO off (m5229, 0x53, bit1)
-        *      The hardware will use 0x54h and 0x55h to control PIO FIFO
-        *      (Not on later devices it seems)
-        *
-        *      0x53 changes meaning on later revs - we must no touch
-        *      bit 1 on them. Need to check if 0x20 is the right break
-        */
-        
-       pci_read_config_byte(dev, 0x53, &tmpbyte);
-       
-       if(m5229_revision <= 0x20)
-               tmpbyte = (tmpbyte & (~0x02)) | 0x01;
-       else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
-               tmpbyte |= 0x03;
-       else
-               tmpbyte |= 0x01;
-
-       pci_write_config_byte(dev, 0x53, tmpbyte);
-
        local_irq_restore(flags);
 
        return cbl;