/* 2M size */
-static void sep_load_rom_code(void)
+static void sep_load_rom_code(struct sep_device *sep)
{
/* Index variables */
unsigned long i, k, j;
edbg("SEP Driver: DX_CC_TST_SepRomLoader start\n");
edbg("SEP Driver: k is %lu\n", k);
- edbg("SEP Driver: sep_dev->reg_addr is %p\n", sep_dev->reg_addr);
+ edbg("SEP Driver: sep->reg_addr is %p\n", sep->reg_addr);
edbg("SEP Driver: CRYS_SEP_ROM_start_address_offset is %p\n", CRYS_SEP_ROM_start_address_offset);
for (i = 0; i < 4; i++) {
/* write bank */
- sep_write_reg(sep_dev, SEP_ROM_BANK_register_offset, i);
+ sep_write_reg(sep, SEP_ROM_BANK_register_offset, i);
for (j = 0; j < CRYS_SEP_ROM_length / 4; j++) {
- sep_write_reg(sep_dev, CRYS_SEP_ROM_start_address_offset + 4 * j, CRYS_SEP_ROM[i * 0x1000 + j]);
+ sep_write_reg(sep, CRYS_SEP_ROM_start_address_offset + 4 * j, CRYS_SEP_ROM[i * 0x1000 + j]);
k = k - 4;
}
/* reset the SEP */
- sep_write_reg(sep_dev, HW_HOST_SEP_SW_RST_REG_ADDR, 0x1);
+ sep_write_reg(sep, HW_HOST_SEP_SW_RST_REG_ADDR, 0x1);
/* poll for SEP ROM boot finish */
do {
- reg = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
+ reg = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
} while (!reg);
edbg("SEP Driver: ROM polling ended\n");
switch (reg) {
case 0x1:
/* fatal error - read erro status from GPRO */
- error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
+ error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 1\n");
break;
case 0x2:
/* Boot First Phase ended */
- warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
+ warning = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 2\n");
break;
case 0x4:
/* Cold boot ended successfully */
- warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
+ warning = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 4\n");
error = 0;
break;
case 0x8:
/* Warmboot ended successfully */
- warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
+ warning = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 8\n");
error = 0;
break;
case 0x10:
/* ColdWarm boot ended successfully */
- warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
+ warning = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 16\n");
error = 0;
break;
}
#else
-static void sep_load_rom_code(void) { }
+static void sep_load_rom_code(struct sep_device *sep) { }
#endif /* SEP_DRIVER_ARM_DEBUG_MODE */
destination memory, which is external to Linux VM and is given as
physical address
*/
-static int sep_copy_cache_resident_to_area(unsigned long src_cache_addr, unsigned long cache_size_in_bytes, unsigned long src_resident_addr, unsigned long resident_size_in_bytes, unsigned long *dst_new_cache_addr_ptr, unsigned long *dst_new_resident_addr_ptr)
+static int sep_copy_cache_resident_to_area(struct sep_device *sep,
+ unsigned long src_cache_addr,
+ unsigned long cache_size_in_bytes,
+ unsigned long src_resident_addr,
+ unsigned long resident_size_in_bytes,
+ unsigned long *dst_new_cache_addr_ptr,
+ unsigned long *dst_new_resident_addr_ptr)
{
unsigned long resident_addr;
unsigned long cache_addr;
-------------------------------------*/
error = 0;
- edbg("SEP Driver:rar_virtual is %p\n", sep_dev->rar_addr);
- edbg("SEP Driver:rar_physical is %08lx\n", sep_dev->rar_bus);
+ edbg("SEP Driver:rar_virtual is %p\n", sep->rar_addr);
+ edbg("SEP Driver:rar_physical is %08lx\n", sep->rar_bus);
- sep_dev->rar_region_addr = (unsigned long) sep_dev->rar_addr;
+ sep->rar_region_addr = (unsigned long) sep->rar_addr;
- sep_dev->cache_bus = sep_dev->rar_bus;
- sep_dev->cache_addr = sep_dev->rar_addr;
+ sep->cache_bus = sep->rar_bus;
+ sep->cache_addr = sep->rar_addr;
/* load cache */
- error = request_firmware(&fw, cache_name, &sep_dev->pdev->dev);
+ error = request_firmware(&fw, cache_name, &sep->pdev->dev);
if (error) {
edbg("SEP Driver:cant request cache fw\n");
goto end_function;
release_firmware(fw);
- sep_dev->resident_bus = sep_dev->cache_bus + sep_dev->cache_size;
- sep_dev->resident_addr = sep_dev->cache_addr + sep_dev->cache_size;
+ sep->resident_bus = sep->cache_bus + sep->cache_size;
+ sep->resident_addr = sep->cache_addr + sep->cache_size;
/* load resident */
- error = request_firmware(&fw, res_name, &sep_dev->pdev->dev);
+ error = request_firmware(&fw, res_name, &sep->pdev->dev);
if (error) {
edbg("SEP Driver:cant request res fw\n");
goto end_function;
edbg("SEP Driver:res data loc is %p\n", (void *) fw->data);
edbg("SEP Driver:res data size is %08Zx\n", fw->size);
- memcpy((void *) sep_dev->resident_addr, (void *) fw->data, fw->size);
+ memcpy((void *) sep->resident_addr, (void *) fw->data, fw->size);
- sep_dev->resident_size = fw->size;
+ sep->resident_size = fw->size;
release_firmware(fw);
- resident_addr = (unsigned long) sep_dev->resident_addr;
+ resident_addr = (unsigned long) sep->resident_addr;
- edbg("SEP Driver:resident_addr (physical )is %08lx\n", sep_dev->resident_bus);
- edbg("SEP Driver:cache_addr (physical) is %08lx\n", sep_dev->cache_bus);
+ edbg("SEP Driver:resident_addr (physical )is %08lx\n", sep->resident_bus);
+ edbg("SEP Driver:cache_addr (physical) is %08lx\n", sep->cache_bus);
edbg("SEP Driver:resident_addr (logical )is %08lx\n", resident_addr);
edbg("SEP Driver:cache_addr (logical) is %08lx\n", cache_addr);
- edbg("SEP Driver:resident_size is %08lx\n", sep_dev->resident_size);
- edbg("SEP Driver:cache_size is %08lx\n", sep_dev->cache_size);
+ edbg("SEP Driver:resident_size is %08lx\n", sep->resident_size);
+ edbg("SEP Driver:cache_size is %08lx\n", sep->cache_size);
/* physical addresses */
- *dst_new_cache_addr_ptr = sep_dev->cache_bus;
- *dst_new_resident_addr_ptr = sep_dev->resident_bus;
+ *dst_new_cache_addr_ptr = sep->cache_bus;
+ *dst_new_resident_addr_ptr = sep->resident_bus;
end_function:
return error;
}
shared area, and phys_shared_area_addr_ptr
- the physical address of the shared area
*/
-static int sep_map_and_alloc_shared_area(unsigned long shared_area_size, unsigned long *kernel_shared_area_addr_ptr, unsigned long *phys_shared_area_addr_ptr)
+static int sep_map_and_alloc_shared_area(struct sep_device *sep,
+ unsigned long shared_area_size,
+ unsigned long *kernel_shared_area_addr_ptr,
+ unsigned long *phys_shared_area_addr_ptr)
{
- // shared_addr = ioremap_nocache(0xda00000,shared_area_size);
- sep_dev->shared_addr = kmalloc(shared_area_size, GFP_KERNEL);
- if (!sep_dev->shared_addr) {
+ /* shared_addr = ioremap_nocache(0xda00000,shared_area_size); */
+ sep->shared_addr = kmalloc(shared_area_size, GFP_KERNEL);
+ if (!sep->shared_addr) {
edbg("sep_driver:shared memory kmalloc failed\n");
return -1;
}
/* FIXME */
- sep_dev->shared_bus = __pa(sep_dev->shared_addr);
+ sep_dev->shared_bus = __pa(sep->shared_addr);
/* shared_bus = 0xda00000; */
- *kernel_shared_area_addr_ptr = (unsigned long) sep_dev->shared_addr;
+ *kernel_shared_area_addr_ptr = (unsigned long) sep->shared_addr;
/* set the physical address of the shared area */
- *phys_shared_area_addr_ptr = sep_dev->shared_bus;
- edbg("SEP Driver:shared_addr is %p\n", sep_dev->shared_addr);
+ *phys_shared_area_addr_ptr = sep->shared_bus;
+ edbg("SEP Driver:shared_addr is %p\n", sep->shared_addr);
edbg("SEP Driver:shared_region_size is %08lx\n", shared_area_size);
edbg("SEP Driver:shared_physical_addr is %08lx\n", *phys_shared_area_addr_ptr);
(ioremapped), or on the system RAM
This implementation is for the external RAM
*/
-static unsigned long sep_shared_area_virt_to_phys(unsigned long virt_address)
+static unsigned long sep_shared_area_virt_to_phys(struct sep_device *sep,
+ unsigned long virt_address)
{
edbg("SEP Driver:sh virt to phys v %08lx\n", virt_address);
- edbg("SEP Driver:sh virt to phys p %08lx\n", sep_dev->shared_bus + (virt_address - (unsigned long) sep_dev->shared_addr));
+ edbg("SEP Driver:sh virt to phys p %08lx\n", sep->shared_bus + (virt_address - (unsigned long) sep->shared_addr));
- return (unsigned long) sep_dev->shared_bus + (virt_address - (unsigned long) sep_dev->shared_addr);
+ return (unsigned long) sep->shared_bus + (virt_address - (unsigned long) sep->shared_addr);
}
/*
externa RAM device (ioremapped), or on the system RAM This implementation
is for the external RAM
*/
-static unsigned long sep_shared_area_phys_to_virt(unsigned long phys_address)
+static unsigned long sep_shared_area_phys_to_virt(struct sep_device *sep,
+ unsigned long phys_address)
{
- return (unsigned long) sep_dev->shared_addr + (phys_address - sep_dev->shared_bus);
+ return (unsigned long) sep->shared_addr + (phys_address - sep->shared_bus);
}
edbg("SEP Driver: down_interruptible failed\n");
goto end_function;
}
+ /* Bind to the device, we only have one which makes it easy */
+ filp->private_data = sep_dev;
+ if (sep_dev == NULL)
+ return -ENODEV;
/* release data pool allocations */
sep_dev->data_pool_bytes_allocated = 0;
+
end_function:
dbg("SEP Driver:<-------- open end\n");
return error;
/*------------------------------------------------------------
release function
-------------------------------------------------------------*/
-static int sep_release(struct inode *inode_ptr, struct file *file_ptr)
+static int sep_release(struct inode *inode_ptr, struct file *filp)
{
+ struct sep_driver *sep = filp->private_data;
dbg("----------->SEP Driver: sep_release start\n");
#if 0 /*!SEP_DRIVER_POLLING_MODE */
/* close IMR */
- sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, 0x7FFF);
+ sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, 0x7FFF);
/* release IRQ line */
- free_irq(SEP_DIRVER_IRQ_NUM, &sep_dev->reg_addr);
+ free_irq(SEP_DIRVER_IRQ_NUM, sep);
#endif
/* unlock the sep mutex */
static int sep_mmap(struct file *filp, struct vm_area_struct *vma)
{
unsigned long phys_addr;
+ struct sep_device *sep = filp->private_data;
dbg("-------->SEP Driver: mmap start\n");
return -EAGAIN;
}
- edbg("SEP Driver:sep_dev->message_shared_area_addr is %08lx\n", sep_dev->message_shared_area_addr);
+ edbg("SEP Driver:sep->message_shared_area_addr is %08lx\n", sep->message_shared_area_addr);
/* get physical address */
- phys_addr = sep_dev->shared_area_bus;
+ phys_addr = sep->shared_area_bus;
edbg("SEP Driver: phys_addr is %08lx\n", phys_addr);
unsigned long count;
unsigned int mask = 0;
unsigned long retVal = 0; /* flow id */
+ struct sep_device *sep = filp->private_data;
dbg("---------->SEP Driver poll: start\n");
#if SEP_DRIVER_POLLING_MODE
- while (sep_dev->send_ct != (retVal & 0x7FFFFFFF)) {
- retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
+ while (sep->send_ct != (retVal & 0x7FFFFFFF)) {
+ retVal = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
for (count = 0; count < 10 * 4; count += 4)
- edbg("Poll Debug Word %lu of the message is %lu\n", count, *((unsigned long *) (sep_dev->shared_area + SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + count)));
+ edbg("Poll Debug Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + count)));
}
- sep_dev->reply_ct++;
+ sep->reply_ct++;
#else
/* add the event to the polling wait table */
poll_wait(filp, &sep_event, wait);
#endif
- edbg("sep_dev->send_ct is %lu\n", sep_dev->send_ct);
- edbg("sep_dev->reply_ct is %lu\n", sep_dev->reply_ct);
+ edbg("sep->send_ct is %lu\n", sep->send_ct);
+ edbg("sep->reply_ct is %lu\n", sep->reply_ct);
/* check if the data is ready */
- if (sep_dev->send_ct == sep_dev->reply_ct) {
+ if (sep->send_ct == sep->reply_ct) {
for (count = 0; count < 12 * 4; count += 4)
- edbg("Sep Mesg Word %lu of the message is %lu\n", count, *((unsigned long *) (sep_dev->shared_area + count)));
+ edbg("Sep Mesg Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + count)));
for (count = 0; count < 10 * 4; count += 4)
- edbg("Debug Data Word %lu of the message is %lu\n", count, *((unsigned long *) (sep_dev->shared_area + 0x1800 + count)));
+ edbg("Debug Data Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + 0x1800 + count)));
- retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
+ retVal = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
edbg("retVal is %lu\n", retVal);
/* check if the this is sep reply or request */
if (retVal >> 31) {
/*
calculates time and sets it at the predefined address
*/
-static int sep_set_time(unsigned long *address_ptr, unsigned long *time_in_sec_ptr)
+static int sep_set_time(struct sep_device *sep, unsigned long *address_ptr, unsigned long *time_in_sec_ptr)
{
struct timeval time;
/* address of time in the kernel */
do_gettimeofday(&time);
/* set value in the SYSTEM MEMORY offset */
- time_addr = sep_dev->message_shared_area_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
+ time_addr = sep->message_shared_area_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
*(unsigned long *) time_addr = SEP_TIME_VAL_TOKEN;
*(unsigned long *) (time_addr + 4) = time.tv_sec;
edbg("SEP Driver:time.tv_sec is %lu\n", time.tv_sec);
edbg("SEP Driver:time_addr is %lu\n", time_addr);
- edbg("SEP Driver:sep_dev->message_shared_area_addr is %lu\n", sep_dev->message_shared_area_addr);
+ edbg("SEP Driver:sep->message_shared_area_addr is %lu\n", sep->message_shared_area_addr);
/* set the output parameters if needed */
if (address_ptr)
- *address_ptr = sep_shared_area_virt_to_phys(time_addr);
+ *address_ptr = sep_shared_area_virt_to_phys(sep, time_addr);
if (time_in_sec_ptr)
*time_in_sec_ptr = time.tv_sec;
This function raises interrupt to SEP that signals that is has a new
command from HOST
*/
-static void sep_send_command_handler(void)
+static void sep_send_command_handler(struct sep_device *sep)
{
unsigned long count;
dbg("SEP Driver:--------> sep_send_command_handler start\n");
- sep_set_time(0, 0);
+ sep_set_time(sep, 0, 0);
/* flash cache */
flush_cache_all();
for (count = 0; count < 12 * 4; count += 4)
- edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep_dev->shared_area + count)));
+ edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + count)));
/* update counter */
- sep_dev->send_ct++;
+ sep->send_ct++;
/* send interrupt to SEP */
- sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2);
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2);
dbg("SEP Driver:<-------- sep_send_command_handler end\n");
return;
}
This function raises interrupt to SEPm that signals that is has a
new command from HOST
*/
-static void sep_send_reply_command_handler(void)
+static void sep_send_reply_command_handler(struct sep_device *sep)
{
unsigned long count;
/* flash cache */
flush_cache_all();
for (count = 0; count < 12 * 4; count += 4)
- edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep_dev->shared_area + count)));
+ edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + count)));
/* update counter */
- sep_dev->send_ct++;
+ sep->send_ct++;
/* send the interrupt to SEP */
- sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep_dev->send_ct);
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep->send_ct);
/* update both counters */
- sep_dev->send_ct++;
- sep_dev->reply_ct++;
+ sep->send_ct++;
+ sep->reply_ct++;
dbg("SEP Driver:<-------- sep_send_reply_command_handler end\n");
}
Therefore, the FVOs in user space can calculate the exact virtual
address of this allocated memory
*/
-static int sep_allocate_data_pool_memory_handler(unsigned long arg)
+static int sep_allocate_data_pool_memory_handler(struct sep_device *sep,
+ unsigned long arg)
{
int error;
struct sep_driver_alloc_t command_args;
goto end_function;
/* allocate memory */
- if ((sep_dev->data_pool_bytes_allocated + command_args.num_bytes) > SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
+ if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
+ /* FIXME: ENOMEM ? */
error = -ENOTTY;
goto end_function;
}
/* set the virtual and physical address */
- command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep_dev->data_pool_bytes_allocated;
- command_args.phys_address = sep_dev->shared_area_bus + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep_dev->data_pool_bytes_allocated;
+ command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
+ command_args.phys_address = sep->shared_area_bus + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
/* write the memory back to the user space */
error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_alloc_t));
goto end_function;
/* set the allocation */
- sep_dev->data_pool_bytes_allocated += command_args.num_bytes;
+ sep->data_pool_bytes_allocated += command_args.num_bytes;
end_function:
dbg("SEP Driver:<-------- sep_allocate_data_pool_memory_handler end\n");
/*
This function handles write into allocated data pool command
*/
-static int sep_write_into_data_pool_handler(unsigned long arg)
+static int sep_write_into_data_pool_handler(struct sep_device *sep, unsigned long arg)
{
int error;
unsigned long virt_address;
goto end_function;
/* calculate the start of the data pool */
- data_pool_area_addr = sep_dev->shared_area + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
+ data_pool_area_addr = sep->shared_area + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
/* check that the range of the virtual kernel address is correct */
- if ((virt_address < data_pool_area_addr) || (virt_address > (data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES))) {
+ if (virt_address < data_pool_area_addr || virt_address > (data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES)) {
+ /* FIXME: EINVAL ? */
error = -ENOTTY;
goto end_function;
}
/*
this function handles the read from data pool command
*/
-static int sep_read_from_data_pool_handler(unsigned long arg)
+static int sep_read_from_data_pool_handler(struct sep_device *sep, unsigned long arg)
{
int error;
/* virtual address of dest application buffer */
goto end_function;
/* calculate the start of the data pool */
- data_pool_area_addr = sep_dev->shared_area + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
+ data_pool_area_addr = sep->shared_area + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
+ /* FIXME: These are incomplete all over the driver: what about + len
+ and when doing that also overflows */
/* check that the range of the virtual kernel address is correct */
- if ((virt_address < data_pool_area_addr) || (virt_address > (data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES))) {
+ if (virt_address < data_pool_area_addr || virt_address > data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
error = -ENOTTY;
goto end_function;
}
and construct a basic lli array, where each entry holds the physical
page address and the size that application data holds in this physical pages
*/
-static int sep_lock_kernel_pages(unsigned long kernel_virt_addr, unsigned long data_size, unsigned long *num_pages_ptr, struct sep_lli_entry_t **lli_array_ptr, struct page ***page_array_ptr)
+static int sep_lock_kernel_pages(struct sep_device *sep,
+ unsigned long kernel_virt_addr,
+ unsigned long data_size,
+ unsigned long *num_pages_ptr,
+ struct sep_lli_entry_t **lli_array_ptr,
+ struct page ***page_array_ptr)
{
int error = 0;
/* the the page of the end address of the user space buffer */
and construct a basic lli array, where each entry holds the physical page
address and the size that application data holds in this physical pages
*/
-static int sep_lock_user_pages(unsigned long app_virt_addr, unsigned long data_size, unsigned long *num_pages_ptr, struct sep_lli_entry_t **lli_array_ptr, struct page ***page_array_ptr)
+static int sep_lock_user_pages(struct sep_device *sep,
+ unsigned long app_virt_addr,
+ unsigned long data_size,
+ unsigned long *num_pages_ptr,
+ struct sep_lli_entry_t **lli_array_ptr,
+ struct page ***page_array_ptr)
{
int error = 0;
/* the the page of the end address of the user space buffer */
this function goes over the list of the print created tables and
prints all the data
*/
-static void sep_debug_print_lli_tables(struct sep_lli_entry_t *lli_table_ptr, unsigned long num_table_entries, unsigned long table_data_size)
+static void sep_debug_print_lli_tables(struct sep_device *sep, struct sep_lli_entry_t *lli_table_ptr, unsigned long num_table_entries, unsigned long table_data_size)
{
unsigned long table_count;
unsigned long entries_count;
edbg("SEP Driver:phys table_data_size is %lu num_table_entries is %lu lli_table_ptr is%lu\n", table_data_size, num_table_entries, (unsigned long) lli_table_ptr);
if ((unsigned long) lli_table_ptr != 0xffffffff)
- lli_table_ptr = (struct sep_lli_entry_t *) sep_shared_area_phys_to_virt((unsigned long) lli_table_ptr);
+ lli_table_ptr = (struct sep_lli_entry_t *) sep_shared_area_phys_to_virt(sep, (unsigned long) lli_table_ptr);
table_count++;
}
This function prepares only input DMA table for synhronic symmetric
operations (HASH)
*/
-static int sep_prepare_input_dma_table(unsigned long app_virt_addr, unsigned long data_size, unsigned long block_size, unsigned long *lli_table_ptr, unsigned long *num_entries_ptr, unsigned long *table_data_size_ptr, bool isKernelVirtualAddress)
+static int sep_prepare_input_dma_table(struct sep_device *sep,
+ unsigned long app_virt_addr,
+ unsigned long data_size,
+ unsigned long block_size,
+ unsigned long *lli_table_ptr,
+ unsigned long *num_entries_ptr,
+ unsigned long *table_data_size_ptr,
+ bool isKernelVirtualAddress)
{
/* pointer to the info entry of the table - the last entry */
struct sep_lli_entry_t *info_entry_ptr;
edbg("SEP Driver:block_size is %lu\n", block_size);
/* initialize the pages pointers */
- sep_dev->in_page_array = 0;
- sep_dev->in_num_pages = 0;
+ sep->in_page_array = 0;
+ sep->in_num_pages = 0;
if (data_size == 0) {
/* special case - created 2 entries table with zero data */
- in_lli_table_ptr = (struct sep_lli_entry_t *) (sep_dev->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES);
- in_lli_table_ptr->physical_address = sep_dev->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+ in_lli_table_ptr = (struct sep_lli_entry_t *) (sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES);
+ in_lli_table_ptr->physical_address = sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
in_lli_table_ptr->block_size = 0;
in_lli_table_ptr++;
in_lli_table_ptr->physical_address = 0xFFFFFFFF;
in_lli_table_ptr->block_size = 0;
- *lli_table_ptr = sep_dev->shared_area_bus + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+ *lli_table_ptr = sep->shared_area_bus + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
*num_entries_ptr = 2;
*table_data_size_ptr = 0;
/* check if the pages are in Kernel Virtual Address layout */
if (isKernelVirtualAddress == true)
/* lock the pages of the kernel buffer and translate them to pages */
- result = sep_lock_kernel_pages(app_virt_addr, data_size, &sep_dev->in_num_pages, &lli_array_ptr, &sep_dev->in_page_array);
+ result = sep_lock_kernel_pages(sep, app_virt_addr, data_size, &sep->in_num_pages, &lli_array_ptr, &sep->in_page_array);
else
/* lock the pages of the user buffer and translate them to pages */
- result = sep_lock_user_pages(app_virt_addr, data_size, &sep_dev->in_num_pages, &lli_array_ptr, &sep_dev->in_page_array);
+ result = sep_lock_user_pages(sep, app_virt_addr, data_size, &sep->in_num_pages, &lli_array_ptr, &sep->in_page_array);
if (result)
return result;
- edbg("SEP Driver:output sep_dev->in_num_pages is %lu\n", sep_dev->in_num_pages);
+ edbg("SEP Driver:output sep->in_num_pages is %lu\n", sep->in_num_pages);
current_entry = 0;
info_entry_ptr = 0;
- sep_lli_entries = sep_dev->in_num_pages;
+ sep_lli_entries = sep->in_num_pages;
/* initiate to point after the message area */
- lli_table_alloc_addr = sep_dev->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+ lli_table_alloc_addr = sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
/* loop till all the entries in in array are not processed */
while (current_entry < sep_lli_entries) {
if (info_entry_ptr == 0) {
/* set the output parameters to physical addresses */
- *lli_table_ptr = sep_shared_area_virt_to_phys((unsigned long) in_lli_table_ptr);
+ *lli_table_ptr = sep_shared_area_virt_to_phys(sep, (unsigned long) in_lli_table_ptr);
*num_entries_ptr = num_entries_in_table;
*table_data_size_ptr = table_data_size;
edbg("SEP Driver:output lli_table_in_ptr is %08lx\n", *lli_table_ptr);
} else {
/* update the info entry of the previous in table */
- info_entry_ptr->physical_address = sep_shared_area_virt_to_phys((unsigned long) in_lli_table_ptr);
+ info_entry_ptr->physical_address = sep_shared_area_virt_to_phys(sep, (unsigned long) in_lli_table_ptr);
info_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size);
}
}
/* print input tables */
- sep_debug_print_lli_tables((struct sep_lli_entry_t *)
- sep_shared_area_phys_to_virt(*lli_table_ptr), *num_entries_ptr, *table_data_size_ptr);
+ sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *)
+ sep_shared_area_phys_to_virt(sep, *lli_table_ptr), *num_entries_ptr, *table_data_size_ptr);
/* the array of the pages */
kfree(lli_array_ptr);
This function creates the input and output dma tables for
symmetric operations (AES/DES) according to the block size from LLI arays
*/
-static int sep_construct_dma_tables_from_lli(struct sep_lli_entry_t *lli_in_array,
+static int sep_construct_dma_tables_from_lli(struct sep_device *sep,
+ struct sep_lli_entry_t *lli_in_array,
unsigned long sep_in_lli_entries,
struct sep_lli_entry_t *lli_out_array,
unsigned long sep_out_lli_entries,
dbg("SEP Driver:--------> sep_construct_dma_tables_from_lli start\n");
/* initiate to pint after the message area */
- lli_table_alloc_addr = sep_dev->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+ lli_table_alloc_addr = sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
current_in_entry = 0;
current_out_entry = 0;
/* if info entry is null - this is the first table built */
if (info_in_entry_ptr == 0) {
/* set the output parameters to physical addresses */
- *lli_table_in_ptr = sep_shared_area_virt_to_phys((unsigned long) in_lli_table_ptr);
+ *lli_table_in_ptr = sep_shared_area_virt_to_phys(sep, (unsigned long) in_lli_table_ptr);
*in_num_entries_ptr = num_entries_in_table;
- *lli_table_out_ptr = sep_shared_area_virt_to_phys((unsigned long) out_lli_table_ptr);
+ *lli_table_out_ptr = sep_shared_area_virt_to_phys(sep, (unsigned long) out_lli_table_ptr);
*out_num_entries_ptr = num_entries_out_table;
*table_data_size_ptr = table_data_size;
edbg("SEP Driver:output lli_table_out_ptr is %08lx\n", *lli_table_out_ptr);
} else {
/* update the info entry of the previous in table */
- info_in_entry_ptr->physical_address = sep_shared_area_virt_to_phys((unsigned long) in_lli_table_ptr);
+ info_in_entry_ptr->physical_address = sep_shared_area_virt_to_phys(sep, (unsigned long) in_lli_table_ptr);
info_in_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size);
/* update the info entry of the previous in table */
- info_out_entry_ptr->physical_address = sep_shared_area_virt_to_phys((unsigned long) out_lli_table_ptr);
+ info_out_entry_ptr->physical_address = sep_shared_area_virt_to_phys(sep, (unsigned long) out_lli_table_ptr);
info_out_entry_ptr->block_size = ((num_entries_out_table) << 24) | (table_data_size);
}
}
/* print input tables */
- sep_debug_print_lli_tables((struct sep_lli_entry_t *)
- sep_shared_area_phys_to_virt(*lli_table_in_ptr), *in_num_entries_ptr, *table_data_size_ptr);
+ sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *)
+ sep_shared_area_phys_to_virt(sep, *lli_table_in_ptr), *in_num_entries_ptr, *table_data_size_ptr);
/* print output tables */
- sep_debug_print_lli_tables((struct sep_lli_entry_t *)
- sep_shared_area_phys_to_virt(*lli_table_out_ptr), *out_num_entries_ptr, *table_data_size_ptr);
+ sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *)
+ sep_shared_area_phys_to_virt(sep, *lli_table_out_ptr), *out_num_entries_ptr, *table_data_size_ptr);
dbg("SEP Driver:<-------- sep_construct_dma_tables_from_lli end\n");
return 0;
}
symmetric operations (AES, DES). It also checks that each table
is of the modular block size
*/
-static int sep_prepare_input_output_dma_table(unsigned long app_virt_in_addr,
+static int sep_prepare_input_output_dma_table(struct sep_device *sep,
+ unsigned long app_virt_in_addr,
unsigned long app_virt_out_addr,
unsigned long data_size,
unsigned long block_size,
dbg("SEP Driver:--------> sep_prepare_input_output_dma_table start\n");
/* initialize the pages pointers */
- sep_dev->in_page_array = 0;
- sep_dev->out_page_array = 0;
+ sep->in_page_array = 0;
+ sep->out_page_array = 0;
/* check if the pages are in Kernel Virtual Address layout */
if (isKernelVirtualAddress == true) {
/* lock the pages of the kernel buffer and translate them to pages */
- result = sep_lock_kernel_pages(app_virt_in_addr, data_size, &sep_dev->in_num_pages, &lli_in_array, &sep_dev->in_page_array);
+ result = sep_lock_kernel_pages(sep, app_virt_in_addr, data_size, &sep->in_num_pages, &lli_in_array, &sep->in_page_array);
if (result) {
edbg("SEP Driver: sep_lock_kernel_pages for input virtual buffer failed\n");
goto end_function;
}
} else {
/* lock the pages of the user buffer and translate them to pages */
- result = sep_lock_user_pages(app_virt_in_addr, data_size, &sep_dev->in_num_pages, &lli_in_array, &sep_dev->in_page_array);
+ result = sep_lock_user_pages(sep, app_virt_in_addr, data_size, &sep->in_num_pages, &lli_in_array, &sep->in_page_array);
if (result) {
edbg("SEP Driver: sep_lock_user_pages for input virtual buffer failed\n");
goto end_function;
}
if (isKernelVirtualAddress == true) {
- result = sep_lock_kernel_pages(app_virt_out_addr, data_size, &sep_dev->out_num_pages, &lli_out_array, &sep_dev->out_page_array);
+ result = sep_lock_kernel_pages(sep, app_virt_out_addr, data_size, &sep->out_num_pages, &lli_out_array, &sep->out_page_array);
if (result) {
edbg("SEP Driver: sep_lock_kernel_pages for output virtual buffer failed\n");
goto end_function_with_error1;
}
} else {
- result = sep_lock_user_pages(app_virt_out_addr, data_size, &sep_dev->out_num_pages, &lli_out_array, &sep_dev->out_page_array);
+ result = sep_lock_user_pages(sep, app_virt_out_addr, data_size, &sep->out_num_pages, &lli_out_array, &sep->out_page_array);
if (result) {
edbg("SEP Driver: sep_lock_user_pages for output virtual buffer failed\n");
goto end_function_with_error1;
}
}
- edbg("sep_dev->in_num_pages is %lu\n", sep_dev->in_num_pages);
- edbg("sep_dev->out_num_pages is %lu\n", sep_dev->out_num_pages);
+ edbg("sep->in_num_pages is %lu\n", sep->in_num_pages);
+ edbg("sep->out_num_pages is %lu\n", sep->out_num_pages);
edbg("SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n", SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
/* call the fucntion that creates table from the lli arrays */
- result = sep_construct_dma_tables_from_lli(lli_in_array, sep_dev->in_num_pages, lli_out_array, sep_dev->out_num_pages, block_size, lli_table_in_ptr, lli_table_out_ptr, in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr);
+ result = sep_construct_dma_tables_from_lli(sep, lli_in_array, sep->in_num_pages, lli_out_array, sep->out_num_pages, block_size, lli_table_in_ptr, lli_table_out_ptr, in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr);
if (result) {
edbg("SEP Driver: sep_construct_dma_tables_from_lli failed\n");
goto end_function_with_error2;
this function handles tha request for creation of the DMA table
for the synchronic symmetric operations (AES,DES)
*/
-static int sep_create_sync_dma_tables_handler(unsigned long arg)
+static int sep_create_sync_dma_tables_handler(struct sep_device *sep,
+ unsigned long arg)
{
int error;
/* command arguments */
/* check if we need to build only input table or input/output */
if (command_args.app_out_address)
/* prepare input and output tables */
- error = sep_prepare_input_output_dma_table(command_args.app_in_address,
+ error = sep_prepare_input_output_dma_table(sep,
+ command_args.app_in_address,
command_args.app_out_address,
command_args.data_in_size,
command_args.block_size,
&command_args.out_table_address, &command_args.in_table_num_entries, &command_args.out_table_num_entries, &command_args.table_data_size, command_args.isKernelVirtualAddress);
else
/* prepare input tables */
- error = sep_prepare_input_dma_table(command_args.app_in_address,
+ error = sep_prepare_input_dma_table(sep,
+ command_args.app_in_address,
command_args.data_in_size, command_args.block_size, &command_args.in_table_address, &command_args.in_table_num_entries, &command_args.table_data_size, command_args.isKernelVirtualAddress);
if (error)
goto end_function;
/* copy to user */
error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_build_sync_table_t));
+ /* FIXME: wrong error returned ! */
end_function:
dbg("SEP Driver:<-------- sep_create_sync_dma_tables_handler end\n");
return error;
/*
this function handles the request for freeing dma table for synhronic actions
*/
-static int sep_free_dma_table_data_handler(void)
+static int sep_free_dma_table_data_handler(struct sep_device *sep)
{
dbg("SEP Driver:--------> sep_free_dma_table_data_handler start\n");
/* free input pages array */
- sep_free_dma_pages(sep_dev->in_page_array, sep_dev->in_num_pages, 0);
+ sep_free_dma_pages(sep->in_page_array, sep->in_num_pages, 0);
/* free output pages array if needed */
- if (sep_dev->out_page_array)
- sep_free_dma_pages(sep_dev->out_page_array, sep_dev->out_num_pages, 1);
+ if (sep->out_page_array)
+ sep_free_dma_pages(sep->out_page_array, sep->out_num_pages, 1);
/* reset all the values */
- sep_dev->in_page_array = 0;
- sep_dev->out_page_array = 0;
- sep_dev->in_num_pages = 0;
- sep_dev->out_num_pages = 0;
+ sep->in_page_array = 0;
+ sep->out_page_array = 0;
+ sep->in_num_pages = 0;
+ sep->out_num_pages = 0;
dbg("SEP Driver:<-------- sep_free_dma_table_data_handler end\n");
return 0;
}
/*
this function find a space for the new flow dma table
*/
-static int sep_find_free_flow_dma_table_space(unsigned long **table_address_ptr)
+static int sep_find_free_flow_dma_table_space(struct sep_device *sep,
+ unsigned long **table_address_ptr)
{
int error = 0;
/* pointer to the id field of the flow dma table */
unsigned long table_size_in_words;
/* find the start address of the flow DMA table area */
- flow_dma_area_start_addr = sep_dev->shared_area + SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+ flow_dma_area_start_addr = sep->shared_area + SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES;
/* set end address of the flow table area */
flow_dma_area_end_addr = flow_dma_area_start_addr + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES;
return error;
}
-
-
/*
This function creates one DMA table for flow and returns its data,
and pointer to its info entry
*/
-static int sep_prepare_one_flow_dma_table(unsigned long virt_buff_addr, unsigned long virt_buff_size, struct sep_lli_entry_t *table_data, struct sep_lli_entry_t **info_entry_ptr, struct sep_flow_context_t *flow_data_ptr, bool isKernelVirtualAddress)
+static int sep_prepare_one_flow_dma_table(struct sep_device *sep,
+ unsigned long virt_buff_addr,
+ unsigned long virt_buff_size,
+ struct sep_lli_entry_t *table_data,
+ struct sep_lli_entry_t **info_entry_ptr,
+ struct sep_flow_context_t *flow_data_ptr,
+ bool isKernelVirtualAddress)
{
int error;
/* the range in pages */
unsigned long entry_count;
/* find the space for the new table */
- error = sep_find_free_flow_dma_table_space(&start_dma_table_ptr);
+ error = sep_find_free_flow_dma_table_space(sep, &start_dma_table_ptr);
if (error)
goto end_function;
/* check if the pages are in Kernel Virtual Address layout */
if (isKernelVirtualAddress == true)
/* lock kernel buffer in the memory */
- error = sep_lock_kernel_pages(virt_buff_addr, virt_buff_size, &lli_array_size, &lli_array, &page_array_ptr);
+ error = sep_lock_kernel_pages(sep, virt_buff_addr, virt_buff_size, &lli_array_size, &lli_array, &page_array_ptr);
else
/* lock user buffer in the memory */
- error = sep_lock_user_pages(virt_buff_addr, virt_buff_size, &lli_array_size, &lli_array, &page_array_ptr);
+ error = sep_lock_user_pages(sep, virt_buff_addr, virt_buff_size, &lli_array_size, &lli_array, &page_array_ptr);
if (error)
goto end_function;
This function creates a list of tables for flow and returns the data for
the first and last tables of the list
*/
-static int sep_prepare_flow_dma_tables(unsigned long num_virtual_buffers,
- unsigned long first_buff_addr, struct sep_flow_context_t *flow_data_ptr, struct sep_lli_entry_t *first_table_data_ptr, struct sep_lli_entry_t *last_table_data_ptr, bool isKernelVirtualAddress)
+static int sep_prepare_flow_dma_tables(struct sep_device *sep,
+ unsigned long num_virtual_buffers,
+ unsigned long first_buff_addr, struct sep_flow_context_t *flow_data_ptr, struct sep_lli_entry_t *first_table_data_ptr, struct sep_lli_entry_t *last_table_data_ptr, bool isKernelVirtualAddress)
{
int error;
unsigned long virt_buff_addr;
first_buff_addr++;
/* now prepare the one flow LLI table from the data */
- error = sep_prepare_one_flow_dma_table(virt_buff_addr, virt_buff_size, &table_data, &info_entry_ptr, flow_data_ptr, isKernelVirtualAddress);
+ error = sep_prepare_one_flow_dma_table(sep, virt_buff_addr, virt_buff_size, &table_data, &info_entry_ptr, flow_data_ptr, isKernelVirtualAddress);
if (error)
goto end_function;
/*
This function returns pointer to the flow data structure
that contains the given id
+
+ FIXME: Daft API
*/
-static int sep_find_flow_context(unsigned long flow_id, struct sep_flow_context_t **flow_data_ptr)
+static int sep_find_flow_context(struct sep_device *sep,
+ unsigned long flow_id,
+ struct sep_flow_context_t **flow_data_ptr)
{
unsigned long count;
int error = 0;
when 2 flows are with default flag
*/
for (count = 0; count < SEP_DRIVER_NUM_FLOWS; count++) {
- if (sep_dev->flows[count].flow_id == flow_id) {
- *flow_data_ptr = &sep_dev->flows[count];
+ if (sep->flows[count].flow_id == flow_id) {
+ *flow_data_ptr = &sep->flows[count];
break;
}
}
/*
this function handles the request to create the DMA tables for flow
*/
-static int sep_create_flow_dma_tables_handler(unsigned long arg)
+static int sep_create_flow_dma_tables_handler(struct sep_device *sep,
+ unsigned long arg)
{
int error;
struct sep_driver_build_flow_table_t command_args;
first_table_data.physical_address = 0xffffffff;
/* find the free structure for flow data */
- error = sep_find_flow_context(SEP_FREE_FLOW_ID, &flow_context_ptr);
+ error = sep_find_flow_context(sep, SEP_FREE_FLOW_ID, &flow_context_ptr);
if (error)
goto end_function;
goto end_function;
/* create flow tables */
- error = sep_prepare_flow_dma_tables(command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress);
+ error = sep_prepare_flow_dma_tables(sep, command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress);
if (error)
goto end_function_with_error;
}
/*
- this functio nhandles add tables to flow
+ this function handles add tables to flow
*/
-static int sep_add_flow_tables_handler(unsigned long arg)
+static int sep_add_flow_tables_handler(struct sep_device *sep, unsigned long arg)
{
int error;
unsigned long num_entries;
goto end_function;
/* find the flow structure for the flow id */
- error = sep_find_flow_context(command_args.flow_id, &flow_context_ptr);
+ error = sep_find_flow_context(sep, command_args.flow_id, &flow_context_ptr);
if (error)
goto end_function;
/* prepare the flow dma tables */
- error = sep_prepare_flow_dma_tables(command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress);
+ error = sep_prepare_flow_dma_tables(sep, command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress);
if (error)
goto end_function_with_error;
/*
this function add the flow add message to the specific flow
*/
-static int sep_add_flow_tables_message_handler(unsigned long arg)
+static int sep_add_flow_tables_message_handler(struct sep_device *sep, unsigned long arg)
{
int error;
struct sep_driver_add_message_t command_args;
}
/* find the flow context */
- error = sep_find_flow_context(command_args.flow_id, &flow_context_ptr);
+ error = sep_find_flow_context(sep, command_args.flow_id, &flow_context_ptr);
if (error)
goto end_function;
/*
this function returns the physical and virtual addresses of the static pool
*/
-static int sep_get_static_pool_addr_handler(unsigned long arg)
+static int sep_get_static_pool_addr_handler(struct sep_device *sep, unsigned long arg)
{
int error;
struct sep_driver_static_pool_addr_t command_args;
dbg("SEP Driver:--------> sep_get_static_pool_addr_handler start\n");
/*prepare the output parameters in the struct */
- command_args.physical_static_address = sep_dev->shared_area_bus + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
- command_args.virtual_static_address = sep_dev->shared_area + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
+ command_args.physical_static_address = sep->shared_area_bus + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
+ command_args.virtual_static_address = sep->shared_area + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
edbg("SEP Driver:physical_static_address is %08lx, virtual_static_address %08lx\n", command_args.physical_static_address, command_args.virtual_static_address);
this address gets the offset of the physical address from the start
of the mapped area
*/
-static int sep_get_physical_mapped_offset_handler(unsigned long arg)
+static int sep_get_physical_mapped_offset_handler(struct sep_device *sep, unsigned long arg)
{
int error;
struct sep_driver_get_mapped_offset_t command_args;
if (error)
goto end_function;
- if (command_args.physical_address < sep_dev->shared_area_bus) {
+ if (command_args.physical_address < sep->shared_area_bus) {
+ /* FIXME */
error = -ENOTTY;
goto end_function;
}
/*prepare the output parameters in the struct */
- command_args.offset = command_args.physical_address - sep_dev->shared_area_bus;
+ command_args.offset = command_args.physical_address - sep->shared_area_bus;
edbg("SEP Driver:physical_address is %08lx, offset is %lu\n", command_args.physical_address, command_args.offset);
/*
?
*/
-static int sep_start_handler(void)
+static int sep_start_handler(struct sep_device *sep)
{
unsigned long reg_val;
unsigned long error = 0;
/* wait in polling for message from SEP */
do
- reg_val = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
+ reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
while (!reg_val);
/* check the value */
if (reg_val == 0x1)
- /* fatal error - read erro status from GPRO */
- error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
+ /* fatal error - read error status from GPRO */
+ error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
dbg("SEP Driver:<-------- sep_start_handler end\n");
return error;
}
/*
this function handles the request for SEP initialization
*/
-static int sep_init_handler(unsigned long arg)
+static int sep_init_handler(struct sep_device *sep, unsigned long arg)
{
unsigned long message_word;
unsigned long *message_ptr;
message_ptr = (unsigned long *) command_args.message_addr;
/* set the base address of the SRAM */
- sep_write_reg(sep_dev, HW_SRAM_ADDR_REG_ADDR, HW_CC_SRAM_BASE_ADDRESS);
+ sep_write_reg(sep, HW_SRAM_ADDR_REG_ADDR, HW_CC_SRAM_BASE_ADDRESS);
for (counter = 0; counter < command_args.message_size_in_words; counter++, message_ptr++) {
get_user(message_word, message_ptr);
/* write data to SRAM */
- sep_write_reg(sep_dev, HW_SRAM_DATA_REG_ADDR, message_word);
+ sep_write_reg(sep, HW_SRAM_DATA_REG_ADDR, message_word);
edbg("SEP Driver:message_word is %lu\n", message_word);
/* wait for write complete */
- sep_wait_sram_write(sep_dev);
+ sep_wait_sram_write(sep);
}
dbg("SEP Driver:--------> sep_init_handler - finished getting messages from user space\n");
/* signal SEP */
- sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1);
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1);
do
- reg_val = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
+ reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
while (!(reg_val & 0xFFFFFFFD));
dbg("SEP Driver:--------> sep_init_handler - finished waiting for reg_val & 0xFFFFFFFD \n");
if (reg_val == 0x1) {
edbg("SEP Driver:init failed\n");
- error = sep_read_reg(sep_dev, 0x8060);
+ error = sep_read_reg(sep, 0x8060);
edbg("SEP Driver:sw monitor is %lu\n", error);
/* fatal error - read erro status from GPRO */
- error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
+ error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver:error is %lu\n", error);
}
end_function:
/*
this function handles the request cache and resident reallocation
*/
-static int sep_realloc_cache_resident_handler(unsigned long arg)
+static int sep_realloc_cache_resident_handler(struct sep_device *sep,
+ unsigned long arg)
{
int error;
unsigned long phys_cache_address;
goto end_function;
/* copy cache and resident to the their intended locations */
- error = sep_copy_cache_resident_to_area(command_args.cache_addr, command_args.cache_size_in_bytes, command_args.resident_addr, command_args.resident_size_in_bytes, &phys_cache_address, &phys_resident_address);
+ error = sep_copy_cache_resident_to_area(sep, command_args.cache_addr, command_args.cache_size_in_bytes, command_args.resident_addr, command_args.resident_size_in_bytes, &phys_cache_address, &phys_resident_address);
if (error)
goto end_function;
- command_args.new_base_addr = sep_dev->shared_area_bus;
+ command_args.new_base_addr = sep->shared_area_bus;
/* find the new base address according to the lowest address between
cache, resident and shared area */
command_args.new_resident_addr = phys_resident_address;
/* set the new shared area */
- command_args.new_shared_area_addr = sep_dev->shared_area_bus;
+ command_args.new_shared_area_addr = sep->shared_area_bus;
edbg("SEP Driver:command_args.new_shared_area is %08lx\n", command_args.new_shared_area_addr);
edbg("SEP Driver:command_args.new_base_addr is %08lx\n", command_args.new_base_addr);
/*
this function handles the request for get time
*/
-static int sep_get_time_handler(unsigned long arg)
+static int sep_get_time_handler(struct sep_device *sep, unsigned long arg)
{
int error;
struct sep_driver_get_time_t command_args;
- error = sep_set_time(&command_args.time_physical_address, &command_args.time_value);
+ error = sep_set_time(sep, &command_args.time_physical_address, &command_args.time_value);
if (error == 0)
error = copy_to_user((void __user *)arg,
&command_args, sizeof(struct sep_driver_get_time_t));
/*
This API handles the end transaction request
*/
-static int sep_end_transaction_handler(unsigned long arg)
+static int sep_end_transaction_handler(struct sep_device *sep, unsigned long arg)
{
dbg("SEP Driver:--------> sep_end_transaction_handler start\n");
#if 0 /*!SEP_DRIVER_POLLING_MODE */
/* close IMR */
- sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, 0x7FFF);
+ sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, 0x7FFF);
/* release IRQ line */
- free_irq(SEP_DIRVER_IRQ_NUM, &sep_dev->reg_addr);
+ free_irq(SEP_DIRVER_IRQ_NUM, sep);
/* lock the sep mutex */
mutex_unlock(&sep_mutex);
/*
This function handler the set flow id command
*/
-static int sep_set_flow_id_handler(unsigned long arg)
+static int sep_set_flow_id_handler(struct sep_device *sep, unsigned long arg)
{
int error;
unsigned long flow_id;
/* find the flow data structure that was just used for creating new flow
- its id should be default */
- error = sep_find_flow_context(SEP_TEMP_FLOW_ID, &flow_data_ptr);
+ error = sep_find_flow_context(sep, SEP_TEMP_FLOW_ID, &flow_data_ptr);
if (error)
goto end_function;
static int sep_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
{
int error = 0;
+ struct sep_device *sep = filp->private_data;
dbg("------------>SEP Driver: ioctl start\n");
switch (cmd) {
case SEP_IOCSENDSEPCOMMAND:
/* send command to SEP */
- sep_send_command_handler();
+ sep_send_command_handler(sep);
edbg("SEP Driver: after sep_send_command_handler\n");
break;
case SEP_IOCSENDSEPRPLYCOMMAND:
/* send reply command to SEP */
- sep_send_reply_command_handler();
+ sep_send_reply_command_handler(sep);
break;
case SEP_IOCALLOCDATAPOLL:
/* allocate data pool */
- error = sep_allocate_data_pool_memory_handler(arg);
+ error = sep_allocate_data_pool_memory_handler(sep, arg);
break;
case SEP_IOCWRITEDATAPOLL:
/* write data into memory pool */
- error = sep_write_into_data_pool_handler(arg);
+ error = sep_write_into_data_pool_handler(sep, arg);
break;
case SEP_IOCREADDATAPOLL:
/* read data from data pool into application memory */
- error = sep_read_from_data_pool_handler(arg);
+ error = sep_read_from_data_pool_handler(sep, arg);
break;
case SEP_IOCCREATESYMDMATABLE:
/* create dma table for synhronic operation */
- error = sep_create_sync_dma_tables_handler(arg);
+ error = sep_create_sync_dma_tables_handler(sep, arg);
break;
case SEP_IOCCREATEFLOWDMATABLE:
/* create flow dma tables */
- error = sep_create_flow_dma_tables_handler(arg);
+ error = sep_create_flow_dma_tables_handler(sep, arg);
break;
case SEP_IOCFREEDMATABLEDATA:
/* free the pages */
- error = sep_free_dma_table_data_handler();
+ error = sep_free_dma_table_data_handler(sep);
break;
case SEP_IOCSETFLOWID:
/* set flow id */
- error = sep_set_flow_id_handler(arg);
+ error = sep_set_flow_id_handler(sep, arg);
break;
case SEP_IOCADDFLOWTABLE:
/* add tables to the dynamic flow */
- error = sep_add_flow_tables_handler(arg);
+ error = sep_add_flow_tables_handler(sep, arg);
break;
case SEP_IOCADDFLOWMESSAGE:
/* add message of add tables to flow */
- error = sep_add_flow_tables_message_handler(arg);
+ error = sep_add_flow_tables_message_handler(sep, arg);
break;
case SEP_IOCSEPSTART:
/* start command to sep */
- error = sep_start_handler();
+ error = sep_start_handler(sep);
break;
case SEP_IOCSEPINIT:
/* init command to sep */
- error = sep_init_handler(arg);
+ error = sep_init_handler(sep, arg);
break;
case SEP_IOCGETSTATICPOOLADDR:
/* get the physical and virtual addresses of the static pool */
- error = sep_get_static_pool_addr_handler(arg);
+ error = sep_get_static_pool_addr_handler(sep, arg);
break;
case SEP_IOCENDTRANSACTION:
- error = sep_end_transaction_handler(arg);
+ error = sep_end_transaction_handler(sep, arg);
break;
case SEP_IOCREALLOCCACHERES:
- error = sep_realloc_cache_resident_handler(arg);
+ error = sep_realloc_cache_resident_handler(sep, arg);
break;
case SEP_IOCGETMAPPEDADDROFFSET:
- error = sep_get_physical_mapped_offset_handler(arg);
+ error = sep_get_physical_mapped_offset_handler(sep, arg);
break;
case SEP_IOCGETIME:
- error = sep_get_time_handler(arg);
+ error = sep_get_time_handler(sep, arg);
break;
default:
error = -ENOTTY;
flag may be checked */
if (flow_data_ptr->input_tables_flag) {
/* copy the message to the shared RAM and signal SEP */
- memcpy((void *) flow_data_ptr->message, (void *) sep_dev->shared_area, flow_data_ptr->message_size_in_bytes);
+ memcpy((void *) flow_data_ptr->message, (void *) sep->shared_area, flow_data_ptr->message_size_in_bytes);
- sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR2_REG_ADDR, 0x2);
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, 0x2);
}
mutex_unlock(&sep_mutex);
}
unsigned long reg_val;
unsigned long flow_id;
struct sep_flow_context_t *flow_context_ptr;
+ struct sep_device *sep = dev_id;
int_error = IRQ_HANDLED;
/* read the IRR register to check if this is SEP interrupt */
- reg_val = sep_read_reg(sep_dev, HW_HOST_IRR_REG_ADDR);
+ reg_val = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR);
edbg("SEP Interrupt - reg is %08lx\n", reg_val);
/* check if this is the flow interrupt */
if (0 /*reg_val & (0x1 << 11) */ ) {
/* read GPRO to find out the which flow is done */
- flow_id = sep_read_reg(sep_dev, HW_HOST_IRR_REG_ADDR);
+ flow_id = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR);
/* find the contex of the flow */
- error = sep_find_flow_context(flow_id >> 28, &flow_context_ptr);
+ error = sep_find_flow_context(sep, flow_id >> 28, &flow_context_ptr);
if (error)
goto end_function_with_error;
INIT_WORK(&flow_context_ptr->flow_wq, sep_flow_done_handler);
/* queue the work */
- queue_work(sep_dev->flow_wq, &flow_context_ptr->flow_wq);
+ queue_work(sep->flow_wq, &flow_context_ptr->flow_wq);
} else {
/* check if this is reply interrupt from SEP */
if (reg_val & (0x1 << 13)) {
/* update the counter of reply messages */
- sep_dev->reply_ct++;
+ sep->reply_ct++;
/* wake up the waiting process */
wake_up(&sep_event);
}
end_function_with_error:
/* clear the interrupt */
- sep_write_reg(sep_dev, HW_HOST_ICR_REG_ADDR, reg_val);
+ sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, reg_val);
end_function:
return int_error;
}
-static void sep_wait_busy(struct sep_device *dev)
+static void sep_wait_busy(struct sep_device *sep)
{
u32 reg;
do {
- reg = sep_read_reg(sep_dev, HW_HOST_SEP_BUSY_REG_ADDR);
+ reg = sep_read_reg(sep, HW_HOST_SEP_BUSY_REG_ADDR);
} while (reg);
}
/*
PATCH for configuring the DMA to single burst instead of multi-burst
*/
-static void sep_configure_dma_burst(void)
+static void sep_configure_dma_burst(struct sep_device *sep)
{
#define HW_AHB_RD_WR_BURSTS_REG_ADDR 0x0E10UL
dbg("SEP Driver:<-------- sep_configure_dma_burst start \n");
/* request access to registers from SEP */
- sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2);
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2);
dbg("SEP Driver:<-------- sep_configure_dma_burst finished request access to registers from SEP (write reg) \n");
- sep_wait_busy(sep_dev);
+ sep_wait_busy(sep);
dbg("SEP Driver:<-------- sep_configure_dma_burst finished request access to registers from SEP (while(revVal) wait loop) \n");
/* set the DMA burst register to single burst */
- sep_write_reg(sep_dev, HW_AHB_RD_WR_BURSTS_REG_ADDR, 0x0UL);
+ sep_write_reg(sep, HW_AHB_RD_WR_BURSTS_REG_ADDR, 0x0UL);
/* release the sep busy */
- sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x0UL);
- sep_wait_busy(sep_dev);
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x0UL);
+ sep_wait_busy(sep);
dbg("SEP Driver:<-------- sep_configure_dma_burst done \n");
}
/*
- function that is activaed on the succesfull probe of the SEP device
+ Function that is activaed on the succesful probe of the SEP device
*/
static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int error = 0;
+ struct sep_device *sep;
+ int counter;
+ int size; /* size of memory for allocation */
edbg("Sep pci probe starting\n");
+ if (sep_dev != NULL) {
+ dev_warn(&pdev->dev, "only one SEP supported.\n");
+ return -EBUSY;
+ }
/* enable the device */
error = pci_enable_device(pdev);
}
/* set the pci dev pointer */
- sep_dev->pdev = pdev;
+ sep_dev = &sep_instance;
+ sep = &sep_instance;
+
+ edbg("sep->shared_area = %lx\n", (unsigned long) &sep->shared_area);
+ /* transaction counter that coordinates the transactions between SEP
+ and HOST */
+ sep->send_ct = 0;
+ /* counter for the messages from sep */
+ sep->reply_ct = 0;
+ /* counter for the number of bytes allocated in the pool
+ for the current transaction */
+ sep->data_pool_bytes_allocated = 0;
+
+ /* calculate the total size for allocation */
+ size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES +
+ SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES;
+
+ /* allocate the shared area */
+ if (sep_map_and_alloc_shared_area(sep, size, &sep->shared_area, &sep->shared_area_bus)) {
+ error = -ENOMEM;
+ /* allocation failed */
+ goto end_function_error;
+ }
+ /* now set the memory regions */
+ sep->message_shared_area_addr = sep->shared_area;
+
+ edbg("SEP Driver: sep->message_shared_area_addr is %08lx\n", sep->message_shared_area_addr);
+
+#if (SEP_DRIVER_RECONFIG_MESSAGE_AREA == 1)
+ /* send the new SHARED MESSAGE AREA to the SEP */
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_area_bus);
+
+ /* poll for SEP response */
+ retVal = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
+ while (retVal != 0xffffffff && retVal != sep->shared_area_bus)
+ retVal = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
+
+ /* check the return value (register) */
+ if (retVal != sep->shared_area_bus) {
+ error = -ENOMEM;
+ goto end_function_deallocate_sep_shared_area;
+ }
+#endif
+ /* init the flow contextes */
+ for (counter = 0; counter < SEP_DRIVER_NUM_FLOWS; counter++)
+ sep->flows[counter].flow_id = SEP_FREE_FLOW_ID;
+
+ sep->flow_wq = create_singlethread_workqueue("sepflowwq");
+ if (sep->flow_wq == NULL) {
+ error = -ENOMEM;
+ edbg("sep_driver:flow queue creation failed\n");
+ goto end_function_deallocate_sep_shared_area;
+ }
+ edbg("SEP Driver: create flow workqueue \n");
+ /* load the rom code */
+ sep_load_rom_code(sep);
+
+ sep->pdev = pci_dev_get(pdev);
/* get the io memory start address */
- sep_dev->io_bus = pci_resource_start(pdev, 0);
- if (!sep_dev->io_bus) {
+ sep->io_bus = pci_resource_start(pdev, 0);
+ if (!sep->io_bus) {
edbg("SEP Driver error pci resource start\n");
- goto end_function;
+ goto end_function_deallocate_sep_shared_area;
}
/* get the io memory end address */
- sep_dev->io_end_bus = pci_resource_end(pdev, 0);
- if (!sep_dev->io_end_bus) {
+ sep->io_end_bus = pci_resource_end(pdev, 0);
+ if (!sep->io_end_bus) {
edbg("SEP Driver error pci resource end\n");
- goto end_function;
+ goto end_function_deallocate_sep_shared_area;
}
- sep_dev->io_memory_size = sep_dev->io_end_bus - sep_dev->io_bus + 1;
+ sep->io_memory_size = sep->io_end_bus - sep->io_bus + 1;
- edbg("SEP Driver:io_bus is %08lx\n", sep_dev->io_bus);
+ edbg("SEP Driver:io_bus is %08lx\n", sep->io_bus);
- edbg("SEP Driver:io_memory_end_phyaical_address is %08lx\n", sep_dev->io_end_bus);
+ edbg("SEP Driver:io_memory_end_phyaical_address is %08lx\n", sep->io_end_bus);
- edbg("SEP Driver:io_memory_size is %08lx\n", sep_dev->io_memory_size);
+ edbg("SEP Driver:io_memory_size is %08lx\n", sep->io_memory_size);
- sep_dev->io_addr = ioremap_nocache(sep_dev->io_bus, sep_dev->io_memory_size);
- if (!sep_dev->io_addr) {
+ sep->io_addr = ioremap_nocache(sep->io_bus, sep->io_memory_size);
+ if (!sep->io_addr) {
edbg("SEP Driver error ioremap of io memory\n");
- goto end_function;
+ goto end_function_deallocate_sep_shared_area;
}
- edbg("SEP Driver:io_addr is %p\n", sep_dev->io_addr);
-
- sep_dev->reg_addr = (void __iomem *) sep_dev->io_addr;
+ edbg("SEP Driver:io_addr is %p\n", sep->io_addr);
+ sep->reg_addr = (void __iomem *) sep->io_addr;
/* set up system base address and shared memory location */
- sep_dev->rar_addr = kmalloc(2 * SEP_RAR_IO_MEM_REGION_SIZE, GFP_KERNEL);
+ sep->rar_addr = kmalloc(2 * SEP_RAR_IO_MEM_REGION_SIZE, GFP_KERNEL);
- if (!sep_dev->rar_addr) {
+ if (!sep->rar_addr) {
edbg("SEP Driver:cant kmalloc rar\n");
- goto end_function;
+ goto end_function_uniomap;
}
/* FIXME */
- sep_dev->rar_bus = __pa(sep_dev->rar_addr);
+ sep->rar_bus = __pa(sep->rar_addr);
- edbg("SEP Driver:rar_physical is %08lx\n", sep_dev->rar_bus);
- edbg("SEP Driver:rar_virtual is %p\n", sep_dev->rar_addr);
+ edbg("SEP Driver:rar_physical is %08lx\n", sep->rar_bus);
+ edbg("SEP Driver:rar_virtual is %p\n", sep->rar_addr);
#if !SEP_DRIVER_POLLING_MODE
edbg("SEP Driver: about to write IMR and ICR REG_ADDR\n");
/* clear ICR register */
- sep_write_reg(sep_dev, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF);
+ sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF);
/* set the IMR register - open only GPR 2 */
- sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
+ sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
edbg("SEP Driver: about to call request_irq\n");
/* get the interrupt line */
- error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED, "sep_driver", &sep_dev->reg_addr);
+ error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED, "sep_driver", sep);
if (error)
- goto end_function;
+ goto end_function_free_res;
goto end_function;
edbg("SEP Driver: about to write IMR REG_ADDR");
/* set the IMR register - open only GPR 2 */
- sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
+ sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
+end_function_free_res:
+ kfree(sep->rar_addr);
#endif /* SEP_DRIVER_POLLING_MODE */
+end_function_uniomap:
+ iounmap(sep->io_addr);
+end_function_deallocate_sep_shared_area:
+ /* de-allocate shared area */
+ sep_unmap_and_free_shared_area(size, sep->shared_area, sep->shared_area_bus);
+end_function_error:
+ sep_dev = NULL;
end_function:
return error;
}
.name = "sep_sec_driver",
.id_table = sep_pci_id_tbl,
.probe = sep_probe
+ /* FIXME: remove handler */
};
/* major and minor device numbers */
static int __init sep_init(void)
{
int ret_val = 0;
- int counter;
- int size; /* size of memory for allocation */
-
dbg("SEP Driver:-------->Init start\n");
- edbg("sep->shared_area = %lx\n", (unsigned long) &sep_dev->shared_area);
-
- /* transaction counter that coordinates the transactions between SEP
- and HOST */
- sep_dev->send_ct = 0;
-
- /* counter for the messages from sep */
- sep_dev->reply_ct = 0;
-
- /* counter for the number of bytes allocated in the pool
- for the current transaction */
- sep_dev->data_pool_bytes_allocated = 0;
-
/* FIXME: Probe can occur before we are ready to survive a probe */
ret_val = pci_register_driver(&sep_pci_driver);
if (ret_val) {
edbg("sep_driver:sep_driver_to_device failed, ret_val is %d\n", ret_val);
goto end_function_unregister_from_fs;
}
- /* calculate the total size for allocation */
- size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES +
- SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES;
-
- /* allocate the shared area */
- if (sep_map_and_alloc_shared_area(size, &sep_dev->shared_area, &sep_dev->shared_area_bus)) {
- ret_val = -ENOMEM;
- /* allocation failed */
- goto end_function_unmap_io_memory;
- }
- /* now set the memory regions */
- sep_dev->message_shared_area_addr = sep_dev->shared_area;
-
- edbg("SEP Driver: sep_dev->message_shared_area_addr is %08lx\n", sep_dev->message_shared_area_addr);
-
-#if (SEP_DRIVER_RECONFIG_MESSAGE_AREA == 1)
- /* send the new SHARED MESSAGE AREA to the SEP */
- sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep_dev->shared_area_bus);
-
- /* poll for SEP response */
- retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
- while (retVal != 0xffffffff && retVal != sep_dev->shared_area_bus)
- retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
-
- /* check the return value (register) */
- if (retVal != sep_dev->shared_area_bus) {
- ret_val = -ENOMEM;
- goto end_function_deallocate_message_area;
- }
-#endif
- /* init the flow contextes */
- for (counter = 0; counter < SEP_DRIVER_NUM_FLOWS; counter++)
- sep_dev->flows[counter].flow_id = SEP_FREE_FLOW_ID;
-
- sep_dev->flow_wq = create_singlethread_workqueue("sepflowwq");
- if (sep_dev->flow_wq == NULL) {
- ret_val = -ENOMEM;
- edbg("sep_driver:flow queue creation failed\n");
- goto end_function_deallocate_sep_shared_area;
- }
- edbg("SEP Driver: create flow workqueue \n");
-
/* register driver to fs */
ret_val = sep_register_driver_to_fs();
if (ret_val)
- goto end_function_deallocate_sep_shared_area;
- /* load the rom code */
- sep_load_rom_code();
+ goto end_function_unregister_pci;
goto end_function;
+end_function_unregister_pci:
+ pci_unregister_driver(&sep_pci_driver);
end_function_unregister_from_fs:
/* unregister from fs */
cdev_del(&sep_cdev);
/* unregister dev numbers */
unregister_chrdev_region(sep_devno, 1);
-end_function_deallocate_sep_shared_area:
- /* de-allocate shared area */
- sep_unmap_and_free_shared_area(size, sep_dev->shared_area, sep_dev->shared_area_bus);
-end_function_unmap_io_memory:
- iounmap((void *) sep_dev->reg_addr);
- /* release io memory region */
- release_mem_region(SEP_IO_MEM_REGION_START_ADDRESS, SEP_IO_MEM_REGION_SIZE);
end_function:
dbg("SEP Driver:<-------- Init end\n");
return ret_val;
/* calculate the total size for de-allocation */
size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES +
SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES;
+ /* FIXME: We need to do this in the unload for the device */
/* free shared area */
- sep_unmap_and_free_shared_area(size, sep_dev->shared_area, sep_dev->shared_area_bus);
- edbg("SEP Driver: free pages SEP SHARED AREA \n");
- iounmap((void *) sep_dev->reg_addr);
- edbg("SEP Driver: iounmap \n");
- /* release io memory region */
- release_mem_region(SEP_IO_MEM_REGION_START_ADDRESS, SEP_IO_MEM_REGION_SIZE);
+ if (sep_dev) {
+ sep_unmap_and_free_shared_area(size, sep_dev->shared_area, sep_dev->shared_area_bus);
+ edbg("SEP Driver: free pages SEP SHARED AREA \n");
+ iounmap((void *) sep_dev->reg_addr);
+ edbg("SEP Driver: iounmap \n");
+ }
edbg("SEP Driver: release_mem_region \n");
dbg("SEP Driver:<-------- Exit end\n");
}
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff