/*
* structure for configuration #1 reg in mac address map.
* located at address 0x5000
- */
-typedef union _MAC_CFG1_t {
- u32 value;
- struct {
-#ifdef _BIT_FIELDS_HTOL
- u32 soft_reset:1; /* bit 31 */
- u32 sim_reset:1; /* bit 30 */
- u32 reserved3:10; /* bits 20-29 */
- u32 reset_rx_mc:1; /* bit 19 */
- u32 reset_tx_mc:1; /* bit 18 */
- u32 reset_rx_fun:1; /* bit 17 */
- u32 reset_tx_fun:1; /* bit 16 */
- u32 reserved2:7; /* bits 9-15 */
- u32 loop_back:1; /* bit 8 */
- u32 reserved1:2; /* bits 6-7 */
- u32 rx_flow:1; /* bit 5 */
- u32 tx_flow:1; /* bit 4 */
- u32 syncd_rx_en:1; /* bit 3 */
- u32 rx_enable:1; /* bit 2 */
- u32 syncd_tx_en:1; /* bit 1 */
- u32 tx_enable:1; /* bit 0 */
-#else
- u32 tx_enable:1; /* bit 0 */
- u32 syncd_tx_en:1; /* bit 1 */
- u32 rx_enable:1; /* bit 2 */
- u32 syncd_rx_en:1; /* bit 3 */
- u32 tx_flow:1; /* bit 4 */
- u32 rx_flow:1; /* bit 5 */
- u32 reserved1:2; /* bits 6-7 */
- u32 loop_back:1; /* bit 8 */
- u32 reserved2:7; /* bits 9-15 */
- u32 reset_tx_fun:1; /* bit 16 */
- u32 reset_rx_fun:1; /* bit 17 */
- u32 reset_tx_mc:1; /* bit 18 */
- u32 reset_rx_mc:1; /* bit 19 */
- u32 reserved3:10; /* bits 20-29 */
- u32 sim_reset:1; /* bit 30 */
- u32 soft_reset:1; /* bit 31 */
-#endif
- } bits;
-} MAC_CFG1_t, *PMAC_CFG1_t;
+ *
+ * 31: soft reset
+ * 30: sim reset
+ * 29-20: reserved
+ * 19: reset rx mc
+ * 18: reset tx mc
+ * 17: reset rx func
+ * 16: reset tx fnc
+ * 15-9: reserved
+ * 8: loopback
+ * 7-6: reserved
+ * 5: rx flow
+ * 4: tx flow
+ * 3: syncd rx en
+ * 2: rx enable
+ * 1: syncd tx en
+ * 0: tx enable
+ */
+
+#define CFG1_LOOPBACK 0x00000100
+#define CFG1_RX_FLOW 0x00000020
+#define CFG1_TX_FLOW 0x00000010
+#define CFG1_RX_ENABLE 0x00000004
+#define CFG1_TX_ENABLE 0x00000001
+#define CFG1_WAIT 0x0000000A /* RX & TX syncd */
/*
* structure for configuration #2 reg in mac address map.
* located at address 0x5004
+ * 31-16: reserved
+ * 15-12: preamble
+ * 11-10: reserved
+ * 9-8: if mode
+ * 7-6: reserved
+ * 5: huge frame
+ * 4: length check
+ * 3: undefined
+ * 2: pad crc
+ * 1: crc enable
+ * 0: full duplex
*/
-typedef union _MAC_CFG2_t {
- u32 value;
- struct {
-#ifdef _BIT_FIELDS_HTOL
- u32 reserved3:16; /* bits 16-31 */
- u32 preamble_len:4; /* bits 12-15 */
- u32 reserved2:2; /* bits 10-11 */
- u32 if_mode:2; /* bits 8-9 */
- u32 reserved1:2; /* bits 6-7 */
- u32 huge_frame:1; /* bit 5 */
- u32 len_check:1; /* bit 4 */
- u32 undefined:1; /* bit 3 */
- u32 pad_crc:1; /* bit 2 */
- u32 crc_enable:1; /* bit 1 */
- u32 full_duplex:1; /* bit 0 */
-#else
- u32 full_duplex:1; /* bit 0 */
- u32 crc_enable:1; /* bit 1 */
- u32 pad_crc:1; /* bit 2 */
- u32 undefined:1; /* bit 3 */
- u32 len_check:1; /* bit 4 */
- u32 huge_frame:1; /* bit 5 */
- u32 reserved1:2; /* bits 6-7 */
- u32 if_mode:2; /* bits 8-9 */
- u32 reserved2:2; /* bits 10-11 */
- u32 preamble_len:4; /* bits 12-15 */
- u32 reserved3:16; /* bits 16-31 */
-#endif
- } bits;
-} MAC_CFG2_t, *PMAC_CFG2_t;
+
/*
* structure for Interpacket gap reg in mac address map.
* MAC Module of JAGCore Address Mapping
*/
typedef struct _MAC_t { /* Location: */
- MAC_CFG1_t cfg1; /* 0x5000 */
- MAC_CFG2_t cfg2; /* 0x5004 */
+ u32 cfg1; /* 0x5000 */
+ u32 cfg2; /* 0x5004 */
u32 ipg; /* 0x5008 */
u32 hfdp; /* 0x500C */
MAC_MAX_FM_LEN_t max_fm_len; /* 0x5010 */
/* First we need to reset everything. Write to MAC configuration
* register 1 to perform reset.
*/
- writel(0xC00F0000, &pMac->cfg1.value);
+ writel(0xC00F0000, &pMac->cfg1);
/* Next lets configure the MAC Inter-packet gap register */
ipg = 0x38005860; /* IPG1 0x38 IPG2 0x58 B2B 0x60 */
writel(etdev->RegistryJumboPacket + 4, &pMac->max_fm_len.value);
/* clear out MAC config reset */
- writel(0, &pMac->cfg1.value);
+ writel(0, &pMac->cfg1);
}
/**
{
int32_t delay = 0;
struct _MAC_t __iomem *pMac = &etdev->regs->mac;
- MAC_CFG1_t cfg1;
- MAC_CFG2_t cfg2;
+ u32 cfg1;
+ u32 cfg2;
MAC_IF_CTRL_t ifctrl;
TXMAC_CTL_t ctl;
ctl.value = readl(&etdev->regs->txmac.ctl.value);
- cfg1.value = readl(&pMac->cfg1.value);
- cfg2.value = readl(&pMac->cfg2.value);
+ cfg1 = readl(&pMac->cfg1);
+ cfg2 = readl(&pMac->cfg2);
ifctrl.value = readl(&pMac->if_ctrl.value);
+ /* Set up the if mode bits */
+ cfg2 &= ~0x300;
if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS) {
- cfg2.bits.if_mode = 0x2;
+ cfg2 |= 0x200;
ifctrl.bits.phy_mode = 0x0;
} else {
- cfg2.bits.if_mode = 0x1;
+ cfg2 |= 0x100;
ifctrl.bits.phy_mode = 0x1;
}
/* We need to enable Rx/Tx */
- cfg1.bits.rx_enable = 0x1;
- cfg1.bits.tx_enable = 0x1;
-
- /* Set up flow control */
- cfg1.bits.tx_flow = 0x1;
-
- if ((etdev->FlowControl == RxOnly) ||
- (etdev->FlowControl == Both)) {
- cfg1.bits.rx_flow = 0x1;
- } else {
- cfg1.bits.rx_flow = 0x0;
- }
-
+ cfg1 |= CFG1_RX_ENABLE|CFG1_TX_ENABLE|CFG1_TX_FLOW;
/* Initialize loop back to off */
- cfg1.bits.loop_back = 0;
-
- writel(cfg1.value, &pMac->cfg1.value);
+ cfg1 &= ~(CFG1_LOOPBACK|CFG1_RX_FLOW);
+ if (etdev->FlowControl == RxOnly || etdev->FlowControl == Both)
+ cfg1 |= CFG1_RX_FLOW;
+ writel(cfg1, &pMac->cfg1);
/* Now we need to initialize the MAC Configuration 2 register */
- cfg2.bits.preamble_len = 0x7;
- cfg2.bits.huge_frame = 0x0;
- /* LENGTH FIELD CHECKING bit4: Set this bit to cause the MAC to check
- * the frame's length field to ensure it matches the actual data
- * field length. Clear this bit if no length field checking is
- * desired. Its default is 0.
- */
- cfg2.bits.len_check = 0x1;
+ /* preamble 7, check length, huge frame off, pad crc, crc enable
+ full duplex off */
+ cfg2 |= 0x7016;
+ cfg2 &= ~0x0021;
- cfg2.bits.pad_crc = 0x1;
- cfg2.bits.crc_enable = 0x1;
+ /* Turn on duplex if needed */
+ if (etdev->duplex_mode)
+ cfg2 |= 0x01;
- /* 1 - full duplex, 0 - half-duplex */
- cfg2.bits.full_duplex = etdev->duplex_mode;
ifctrl.bits.ghd_mode = !etdev->duplex_mode;
writel(ifctrl.value, &pMac->if_ctrl.value);
- writel(cfg2.value, &pMac->cfg2.value);
+ writel(cfg2, &pMac->cfg2);
do {
udelay(10);
delay++;
- cfg1.value = readl(&pMac->cfg1.value);
- } while ((!cfg1.bits.syncd_rx_en || !cfg1.bits.syncd_tx_en) &&
- delay < 100);
+ cfg1 = readl(&pMac->cfg1);
+ } while ((cfg1 & CFG1_WAIT) != CFG1_WAIT && delay < 100);
if (delay == 100) {
dev_warn(&etdev->pdev->dev,
"Syncd bits did not respond correctly cfg1 word 0x%08x\n",
- cfg1.value);
+ cfg1);
}
/* Enable TXMAC */
void et131x_soft_reset(struct et131x_adapter *adapter)
{
/* Disable MAC Core */
- writel(0xc00f0000, &adapter->regs->mac.cfg1.value);
+ writel(0xc00f0000, &adapter->regs->mac.cfg1);
/* Set everything to a reset value */
writel(0x7F, &adapter->regs->global.sw_reset);
- writel(0x000f0000, &adapter->regs->mac.cfg1.value);
- writel(0x00000000, &adapter->regs->mac.cfg1.value);
+ writel(0x000f0000, &adapter->regs->mac.cfg1);
+ writel(0x00000000, &adapter->regs->mac.cfg1);
}
/**
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff