Standardize the logging macros used.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
pktlen = status & RDES0_STATUS_FL;
if (pktlen > RX_PKT_SIZE) {
if (net_ratelimit())
- printk(KERN_DEBUG "%s: frame too long (%d)\n",
- wiphy_name(dev->wiphy), pktlen);
+ wiphy_debug(dev->wiphy, "frame too long (%d)\n",
+ pktlen);
pktlen = RX_PKT_SIZE;
}
static irqreturn_t adm8211_interrupt(int irq, void *dev_id)
{
-#define ADM8211_INT(x) \
-do { \
- if (unlikely(stsr & ADM8211_STSR_ ## x)) \
- printk(KERN_DEBUG "%s: " #x "\n", wiphy_name(dev->wiphy)); \
+#define ADM8211_INT(x) \
+do { \
+ if (unlikely(stsr & ADM8211_STSR_ ## x)) \
+ wiphy_debug(dev->wiphy, "%s\n", #x); \
} while (0)
struct ieee80211_hw *dev = dev_id;
}
if (timeout == 0) {
- printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
- " prewrite (reg=0x%08x)\n",
- wiphy_name(dev->wiphy), addr, data, reg);
+ wiphy_debug(dev->wiphy,
+ "adm8211_write_bbp(%d,%d) failed prewrite (reg=0x%08x)\n",
+ addr, data, reg);
return -ETIMEDOUT;
}
if (timeout == 0) {
ADM8211_CSR_WRITE(BBPCTL, ADM8211_CSR_READ(BBPCTL) &
~ADM8211_BBPCTL_WR);
- printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
- " postwrite (reg=0x%08x)\n",
- wiphy_name(dev->wiphy), addr, data, reg);
+ wiphy_debug(dev->wiphy,
+ "adm8211_write_bbp(%d,%d) failed postwrite (reg=0x%08x)\n",
+ addr, data, reg);
return -ETIMEDOUT;
}
break;
default:
- printk(KERN_DEBUG "%s: unsupported transceiver type %d\n",
- wiphy_name(dev->wiphy), priv->transceiver_type);
+ wiphy_debug(dev->wiphy, "unsupported transceiver type %d\n",
+ priv->transceiver_type);
break;
}
/* Nothing to do for ADMtek BBP */
} else if (priv->bbp_type != ADM8211_TYPE_ADMTEK)
- printk(KERN_DEBUG "%s: unsupported BBP type %d\n",
- wiphy_name(dev->wiphy), priv->bbp_type);
+ wiphy_debug(dev->wiphy, "unsupported bbp type %d\n",
+ priv->bbp_type);
ADM8211_RESTORE();
break;
default:
- printk(KERN_DEBUG "%s: unsupported transceiver %d\n",
- wiphy_name(dev->wiphy), priv->transceiver_type);
+ wiphy_debug(dev->wiphy, "unsupported transceiver %d\n",
+ priv->transceiver_type);
break;
}
} else
- printk(KERN_DEBUG "%s: unsupported BBP %d\n",
- wiphy_name(dev->wiphy), priv->bbp_type);
+ wiphy_debug(dev->wiphy, "unsupported bbp %d\n", priv->bbp_type);
ADM8211_CSR_WRITE(SYNRF, 0);
/* Power up MAC and RF chips */
retval = adm8211_hw_reset(dev);
if (retval) {
- printk(KERN_ERR "%s: hardware reset failed\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "hardware reset failed\n");
goto fail;
}
retval = adm8211_init_rings(dev);
if (retval) {
- printk(KERN_ERR "%s: failed to initialize rings\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "failed to initialize rings\n");
goto fail;
}
retval = request_irq(priv->pdev->irq, adm8211_interrupt,
IRQF_SHARED, "adm8211", dev);
if (retval) {
- printk(KERN_ERR "%s: failed to register IRQ handler\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "failed to register irq handler\n");
goto fail;
}
goto err_free_eeprom;
}
- printk(KERN_INFO "%s: hwaddr %pM, Rev 0x%02x\n",
- wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
- pdev->revision);
+ wiphy_info(dev->wiphy, "hwaddr %pm, rev 0x%02x\n",
+ dev->wiphy->perm_addr, pdev->revision);
return 0;
exit:
kfree(hwcfg);
if (ret < 0)
- printk(KERN_ERR "%s: cannot get HW Config (error %d)\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "cannot get hw config (error %d)\n",
+ ret);
return ret;
}
do {
status = at76_get_cmd_status(priv->udev, cmd);
if (status < 0) {
- printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n",
- wiphy_name(priv->hw->wiphy), status);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_cmd_status failed: %d\n",
+ status);
break;
}
schedule_timeout_interruptible(HZ / 10); /* 100 ms */
if (time_after(jiffies, timeout)) {
- printk(KERN_ERR
- "%s: completion timeout for command %d\n",
- wiphy_name(priv->hw->wiphy), cmd);
+ wiphy_err(priv->hw->wiphy,
+ "completion timeout for command %d\n", cmd);
status = -ETIMEDOUT;
break;
}
ret = at76_wait_completion(priv, CMD_SET_MIB);
if (ret != CMD_STATUS_COMPLETE) {
- printk(KERN_INFO
- "%s: set_mib: at76_wait_completion failed "
- "with %d\n", wiphy_name(priv->hw->wiphy), ret);
+ wiphy_info(priv->hw->wiphy,
+ "set_mib: at76_wait_completion failed with %d\n",
+ ret);
ret = -EIO;
}
ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
if (ret < 0)
- printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n",
- wiphy_name(priv->hw->wiphy), cmd, ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_set_card_command(%d) failed: %d\n", cmd, ret);
else
ret = 1;
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "set_mib (pm_mode) failed: %d\n",
+ ret);
return ret;
}
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "set_mib (preamble) failed: %d\n",
+ ret);
return ret;
}
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (frag threshold) failed: %d\n", ret);
return ret;
}
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (rts) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "set_mib (rts) failed: %d\n", ret);
return ret;
}
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (autorate fallback) failed: %d\n", ret);
return ret;
}
ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m,
sizeof(struct mib_mac_addr));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mac_addr) failed: %d\n", ret);
goto exit;
}
ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m,
sizeof(struct mib_mac_wep));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mac_wep) failed: %d\n", ret);
goto exit;
}
ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m,
sizeof(struct mib_mac_mgmt));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mac_mgmt) failed: %d\n", ret);
goto exit;
}
ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mac) failed: %d\n", ret);
goto exit;
}
ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (phy) failed: %d\n", ret);
goto exit;
}
ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (local) failed: %d\n", ret);
goto exit;
}
ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m,
sizeof(struct mib_mdomain));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mdomain) failed: %d\n", ret);
goto exit;
}
struct sk_buff *skb = priv->rx_skb;
if (!priv->rx_urb) {
- printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n",
- wiphy_name(priv->hw->wiphy), __func__);
+ wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is null\n",
+ __func__);
return -EFAULT;
}
if (!skb) {
skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
if (!skb) {
- printk(KERN_ERR "%s: cannot allocate rx skbuff\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy,
+ "cannot allocate rx skbuff\n");
ret = -ENOMEM;
goto exit;
}
at76_dbg(DBG_DEVSTART,
"usb_submit_urb returned -ENODEV");
else
- printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "rx, usb_submit_urb failed: %d\n", ret);
}
exit:
if (ret < 0 && ret != -ENODEV)
- printk(KERN_ERR "%s: cannot submit rx urb - please unload the "
- "driver and/or power cycle the device\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy,
+ "cannot submit rx urb - please unload the driver and/or power cycle the device\n");
return ret;
}
ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
sizeof(struct at76_card_config));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
+ ret);
return ret;
}
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (promiscuous_mode) failed: %d\n", ret);
mutex_unlock(&priv->mtx);
}
sizeof(struct at76_req_join));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
+ ret);
return 0;
}
ret = at76_wait_completion(priv, CMD_JOIN);
at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret);
if (ret != CMD_STATUS_COMPLETE) {
- printk(KERN_ERR "%s: at76_wait_completion failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "at76_wait_completion failed: %d\n",
+ ret);
return 0;
}
at76_dbg(DBG_MAC80211, "%s()", __func__);
if (priv->tx_urb->status == -EINPROGRESS) {
- printk(KERN_ERR "%s: %s called while tx urb is pending\n",
- wiphy_name(priv->hw->wiphy), __func__);
+ wiphy_err(priv->hw->wiphy,
+ "%s called while tx urb is pending\n", __func__);
return NETDEV_TX_BUSY;
}
submit_len, at76_mac80211_tx_callback, priv);
ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
if (ret) {
- printk(KERN_ERR "%s: error in tx submit urb: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret);
if (ret == -EINVAL)
- printk(KERN_ERR
- "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
- wiphy_name(priv->hw->wiphy), priv->tx_urb,
- priv->tx_urb->hcpriv, priv->tx_urb->complete);
+ wiphy_err(priv->hw->wiphy,
+ "-einval: tx urb %p hcpriv %p complete %p\n",
+ priv->tx_urb,
+ priv->tx_urb->hcpriv, priv->tx_urb->complete);
}
return 0;
ret = at76_submit_rx_urb(priv);
if (ret < 0) {
- printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "open: submit_rx_urb failed: %d\n",
+ ret);
goto error;
}
priv->mac80211_registered = 1;
- printk(KERN_INFO "%s: USB %s, MAC %pM, firmware %d.%d.%d-%d\n",
- wiphy_name(priv->hw->wiphy),
- dev_name(&interface->dev), priv->mac_addr,
- priv->fw_version.major, priv->fw_version.minor,
- priv->fw_version.patch, priv->fw_version.build);
- printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n",
- wiphy_name(priv->hw->wiphy),
- priv->regulatory_domain, priv->domain->name);
+ wiphy_info(priv->hw->wiphy, "usb %s, mac %pm, firmware %d.%d.%d-%d\n",
+ dev_name(&interface->dev), priv->mac_addr,
+ priv->fw_version.major, priv->fw_version.minor,
+ priv->fw_version.patch, priv->fw_version.build);
+ wiphy_info(priv->hw->wiphy, "regulatory domain 0x%02x: %s\n",
+ priv->regulatory_domain, priv->domain->name);
exit:
return ret;
if (!priv)
return;
- printk(KERN_INFO "%s: disconnecting\n", wiphy_name(priv->hw->wiphy));
+ wiphy_info(priv->hw->wiphy, "disconnecting\n");
at76_delete_device(priv);
dev_printk(KERN_INFO, &interface->dev, "disconnected\n");
}
err = ar->exec_cmd(ar, AR9170_CMD_WMEM, len, (u8 *) data, 0, NULL);
if (err)
- printk(KERN_DEBUG "%s: writing memory failed\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_debug(ar->hw->wiphy, "writing memory failed\n");
return err;
}
err = ar->exec_cmd(ar, AR9170_CMD_WREG, sizeof(buf),
(u8 *) buf, 0, NULL);
if (err)
- printk(KERN_DEBUG "%s: writing reg %#x (val %#x) failed\n",
- wiphy_name(ar->hw->wiphy), reg, val);
+ wiphy_debug(ar->hw->wiphy, "writing reg %#x (val %#x) failed\n",
+ reg, val);
return err;
}
err = led_classdev_register(wiphy_dev(ar->hw->wiphy),
&ar->leds[i].l);
if (err)
- printk(KERN_ERR "%s: failed to register %s LED (%d).\n",
- wiphy_name(ar->hw->wiphy), ar->leds[i].name, err);
+ wiphy_err(ar->hw->wiphy, "failed to register %s LED (%d).\n",
+ ar->leds[i].name, err);
else
ar->leds[i].registered = true;
struct ar9170_tx_info *arinfo = (void *) txinfo->rate_driver_data;
struct ieee80211_hdr *hdr = (void *) txc->frame_data;
- printk(KERN_DEBUG "%s: => FRAME [skb:%p, q:%d, DA:[%pM] s:%d "
- "mac_ctrl:%04x, phy_ctrl:%08x, timeout:[%d ms]]\n",
- wiphy_name(ar->hw->wiphy), skb, skb_get_queue_mapping(skb),
- ieee80211_get_DA(hdr), ar9170_get_seq_h(hdr),
- le16_to_cpu(txc->mac_control), le32_to_cpu(txc->phy_control),
- jiffies_to_msecs(arinfo->timeout - jiffies));
+ wiphy_debug(ar->hw->wiphy,
+ "=> FRAME [skb:%p, q:%d, DA:[%pM] s:%d "
+ "mac_ctrl:%04x, phy_ctrl:%08x, timeout:[%d ms]]\n",
+ skb, skb_get_queue_mapping(skb),
+ ieee80211_get_DA(hdr), ar9170_get_seq_h(hdr),
+ le16_to_cpu(txc->mac_control), le32_to_cpu(txc->phy_control),
+ jiffies_to_msecs(arinfo->timeout - jiffies));
}
static void __ar9170_dump_txqueue(struct ar9170 *ar,
int i = 0;
printk(KERN_DEBUG "---[ cut here ]---\n");
- printk(KERN_DEBUG "%s: %d entries in queue.\n",
- wiphy_name(ar->hw->wiphy), skb_queue_len(queue));
+ wiphy_debug(ar->hw->wiphy, "%d entries in queue.\n",
+ skb_queue_len(queue));
skb_queue_walk(queue, skb) {
printk(KERN_DEBUG "index:%d =>\n", i++);
{
int i;
- printk(KERN_DEBUG "%s: QoS queue stats\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_debug(ar->hw->wiphy, "qos queue stats\n");
for (i = 0; i < __AR9170_NUM_TXQ; i++)
- printk(KERN_DEBUG "%s: queue:%d limit:%d len:%d waitack:%d "
- " stopped:%d\n", wiphy_name(ar->hw->wiphy), i,
- ar->tx_stats[i].limit, ar->tx_stats[i].len,
- skb_queue_len(&ar->tx_status[i]),
- ieee80211_queue_stopped(ar->hw, i));
+ wiphy_debug(ar->hw->wiphy,
+ "queue:%d limit:%d len:%d waitack:%d stopped:%d\n",
+ i, ar->tx_stats[i].limit, ar->tx_stats[i].len,
+ skb_queue_len(&ar->tx_status[i]),
+ ieee80211_queue_stopped(ar->hw, i));
}
#endif /* AR9170_QUEUE_STOP_DEBUG */
if (time_is_before_jiffies(arinfo->timeout)) {
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: [%ld > %ld] frame expired => "
- "recycle\n", wiphy_name(ar->hw->wiphy),
- jiffies, arinfo->timeout);
+ wiphy_debug(ar->hw->wiphy,
+ "[%ld > %ld] frame expired => recycle\n",
+ jiffies, arinfo->timeout);
ar9170_print_txheader(ar, skb);
#endif /* AR9170_QUEUE_DEBUG */
__skb_unlink(skb, queue);
break;
default:
- printk(KERN_ERR "%s: invalid tx_status response (%x).\n",
- wiphy_name(ar->hw->wiphy), tx_status);
+ wiphy_err(ar->hw->wiphy,
+ "invalid tx_status response (%x)\n", tx_status);
break;
}
if (ar->tx_stats[queue].len < AR9170_NUM_TX_LIMIT_SOFT) {
#ifdef AR9170_QUEUE_STOP_DEBUG
- printk(KERN_DEBUG "%s: wake queue %d\n",
- wiphy_name(ar->hw->wiphy), queue);
+ wiphy_debug(ar->hw->wiphy, "wake queue %d\n", queue);
__ar9170_dump_txstats(ar);
#endif /* AR9170_QUEUE_STOP_DEBUG */
ieee80211_wake_queue(ar->hw, queue);
if (mac && compare_ether_addr(ieee80211_get_DA(hdr), mac)) {
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: skip frame => DA %pM != %pM\n",
- wiphy_name(ar->hw->wiphy), mac,
- ieee80211_get_DA(hdr));
+ wiphy_debug(ar->hw->wiphy,
+ "skip frame => da %pm != %pm\n",
+ mac, ieee80211_get_DA(hdr));
ar9170_print_txheader(ar, skb);
#endif /* AR9170_QUEUE_DEBUG */
continue;
if ((rate != AR9170_TX_INVALID_RATE) && (r != rate)) {
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: skip frame => rate %d != %d\n",
- wiphy_name(ar->hw->wiphy), rate, r);
+ wiphy_debug(ar->hw->wiphy,
+ "skip frame => rate %d != %d\n", rate, r);
ar9170_print_txheader(ar, skb);
#endif /* AR9170_QUEUE_DEBUG */
continue;
}
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_ERR "%s: ESS:[%pM] does not have any "
- "outstanding frames in queue.\n",
- wiphy_name(ar->hw->wiphy), mac);
+ wiphy_err(ar->hw->wiphy,
+ "ESS:[%pM] does not have any outstanding frames in queue.\n",
+ mac);
__ar9170_dump_txqueue(ar, queue);
#endif /* AR9170_QUEUE_DEBUG */
spin_unlock_irqrestore(&queue->lock, flags);
for (i = 0; i < __AR9170_NUM_TXQ; i++) {
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: garbage collector scans queue:%d\n",
- wiphy_name(ar->hw->wiphy), i);
+ wiphy_debug(ar->hw->wiphy, "garbage collector scans queue:%d\n",
+ i);
ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
ar9170_dump_txqueue(ar, &ar->tx_status[i]);
#endif /* AR9170_QUEUE_DEBUG */
u32 q = (phy & AR9170_TX_PHY_QOS_MASK) >>
AR9170_TX_PHY_QOS_SHIFT;
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: recv tx_status for %pM, p:%08x, q:%d\n",
- wiphy_name(ar->hw->wiphy), cmd->tx_status.dst, phy, q);
+ wiphy_debug(ar->hw->wiphy,
+ "recv tx_status for %pm, p:%08x, q:%d\n",
+ cmd->tx_status.dst, phy, q);
#endif /* AR9170_QUEUE_DEBUG */
skb = ar9170_get_queued_skb(ar, cmd->tx_status.dst,
break;
default:
- printk(KERN_INFO "received unhandled event %x\n", cmd->type);
+ pr_info("received unhandled event %x\n", cmd->type);
print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len);
break;
}
/* TODO: update netdevice's RX dropped/errors statistics */
if (ar9170_nag_limiter(ar))
- printk(KERN_DEBUG "%s: received frame with "
- "suspicious error code (%#x).\n",
- wiphy_name(ar->hw->wiphy), error);
+ wiphy_debug(ar->hw->wiphy,
+ "received frame with suspicious error code (%#x).\n",
+ error);
return -EINVAL;
}
break;
default:
if (ar9170_nag_limiter(ar))
- printk(KERN_ERR "%s: invalid plcp cck rate "
- "(%x).\n", wiphy_name(ar->hw->wiphy),
- head->plcp[0]);
+ wiphy_err(ar->hw->wiphy,
+ "invalid plcp cck rate (%x).\n",
+ head->plcp[0]);
return -EINVAL;
}
break;
break;
default:
if (ar9170_nag_limiter(ar))
- printk(KERN_ERR "%s: invalid plcp ofdm rate "
- "(%x).\n", wiphy_name(ar->hw->wiphy),
- head->plcp[0]);
+ wiphy_err(ar->hw->wiphy,
+ "invalid plcp ofdm rate (%x).\n",
+ head->plcp[0]);
return -EINVAL;
}
if (status->band == IEEE80211_BAND_2GHZ)
default:
if (ar9170_nag_limiter(ar))
- printk(KERN_ERR "%s: invalid modulation\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy, "invalid modulation\n");
return -EINVAL;
}
ar->rx_mpdu.has_plcp = true;
} else {
if (ar9170_nag_limiter(ar))
- printk(KERN_ERR "%s: plcp info is clipped.\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy,
+ "plcp info is clipped.\n");
return ;
}
break;
phy = (void *)(buf + mpdu_len);
} else {
if (ar9170_nag_limiter(ar))
- printk(KERN_ERR "%s: frame tail is clipped.\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy,
+ "frame tail is clipped.\n");
return ;
}
if (!ar9170_nag_limiter(ar))
return ;
- printk(KERN_ERR "%s: rx stream did not start "
- "with a first_mpdu frame tag.\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy,
+ "rx stream did not start with a first_mpdu frame tag.\n");
return ;
}
if (!ar->rx_failover_missing) {
/* this is no "short read". */
if (ar9170_nag_limiter(ar)) {
- printk(KERN_ERR "%s: missing tag!\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy,
+ "missing tag!\n");
goto err_telluser;
} else
goto err_silent;
if (ar->rx_failover_missing > tlen) {
if (ar9170_nag_limiter(ar)) {
- printk(KERN_ERR "%s: possible multi "
- "stream corruption!\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy,
+ "possible multi stream corruption!\n");
goto err_telluser;
} else
goto err_silent;
if (ar->rx_failover_missing) {
/* TODO: handle double stream corruption. */
if (ar9170_nag_limiter(ar)) {
- printk(KERN_ERR "%s: double rx stream "
- "corruption!\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy,
+ "double rx stream corruption!\n");
goto err_telluser;
} else
goto err_silent;
if (tlen) {
if (net_ratelimit())
- printk(KERN_ERR "%s: %d bytes of unprocessed "
- "data left in rx stream!\n",
- wiphy_name(ar->hw->wiphy), tlen);
+ wiphy_err(ar->hw->wiphy,
+ "%d bytes of unprocessed data left in rx stream!\n",
+ tlen);
goto err_telluser;
}
return ;
err_telluser:
- printk(KERN_ERR "%s: damaged RX stream data [want:%d, "
- "data:%d, rx:%d, pending:%d ]\n",
- wiphy_name(ar->hw->wiphy), clen, wlen, tlen,
- ar->rx_failover_missing);
+ wiphy_err(ar->hw->wiphy,
+ "damaged RX stream data [want:%d, data:%d, rx:%d, pending:%d ]\n",
+ clen, wlen, tlen, ar->rx_failover_missing);
if (ar->rx_failover_missing)
print_hex_dump_bytes("rxbuf:", DUMP_PREFIX_OFFSET,
print_hex_dump_bytes("stream:", DUMP_PREFIX_OFFSET,
skb->data, skb->len);
- printk(KERN_ERR "%s: please check your hardware and cables, if "
- "you see this message frequently.\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy,
+ "If you see this message frequently, please check your hardware and cables.\n");
err_silent:
if (ar->rx_failover_missing) {
if (remaining_space < frames) {
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: tx quota reached queue:%d, "
- "remaining slots:%d, needed:%d\n",
- wiphy_name(ar->hw->wiphy), i, remaining_space,
- frames);
+ wiphy_debug(ar->hw->wiphy,
+ "tx quota reached queue:%d, "
+ "remaining slots:%d, needed:%d\n",
+ i, remaining_space, frames);
#endif /* AR9170_QUEUE_DEBUG */
frames = remaining_space;
}
ar->tx_stats[i].count += frames;
if (ar->tx_stats[i].len >= ar->tx_stats[i].limit) {
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: queue %d full\n",
- wiphy_name(ar->hw->wiphy), i);
-
- printk(KERN_DEBUG "%s: stuck frames: ===>\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_debug(ar->hw->wiphy, "queue %d full\n", i);
+ wiphy_debug(ar->hw->wiphy, "stuck frames: ===>\n");
ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
ar9170_dump_txqueue(ar, &ar->tx_status[i]);
#endif /* AR9170_QUEUE_DEBUG */
#ifdef AR9170_QUEUE_STOP_DEBUG
- printk(KERN_DEBUG "%s: stop queue %d\n",
- wiphy_name(ar->hw->wiphy), i);
+ wiphy_debug(ar->hw->wiphy, "stop queue %d\n", i);
__ar9170_dump_txstats(ar);
#endif /* AR9170_QUEUE_STOP_DEBUG */
ieee80211_stop_queue(ar->hw, i);
msecs_to_jiffies(AR9170_TX_TIMEOUT);
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: send frame q:%d =>\n",
- wiphy_name(ar->hw->wiphy), i);
+ wiphy_debug(ar->hw->wiphy, "send frame q:%d =>\n", i);
ar9170_print_txheader(ar, skb);
#endif /* AR9170_QUEUE_DEBUG */
}
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: ar9170_tx report for queue %d\n",
- wiphy_name(ar->hw->wiphy), i);
+ wiphy_debug(ar->hw->wiphy,
+ "ar9170_tx report for queue %d\n", i);
- printk(KERN_DEBUG "%s: unprocessed pending frames left:\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_debug(ar->hw->wiphy,
+ "unprocessed pending frames left:\n");
ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
#endif /* AR9170_QUEUE_DEBUG */
if (unlikely(frames_failed)) {
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: frames failed %d =>\n",
- wiphy_name(ar->hw->wiphy), frames_failed);
+ wiphy_debug(ar->hw->wiphy,
+ "frames failed %d =>\n", frames_failed);
#endif /* AR9170_QUEUE_DEBUG */
spin_lock_irqsave(&ar->tx_stats_lock, flags);
ar->tx_stats[i].len -= frames_failed;
ar->tx_stats[i].count -= frames_failed;
#ifdef AR9170_QUEUE_STOP_DEBUG
- printk(KERN_DEBUG "%s: wake queue %d\n",
- wiphy_name(ar->hw->wiphy), i);
+ wiphy_debug(ar->hw->wiphy, "wake queue %d\n", i);
__ar9170_dump_txstats(ar);
#endif /* AR9170_QUEUE_STOP_DEBUG */
ieee80211_wake_queue(ar->hw, i);
ar9170_regwrite_finish();
err = ar9170_regwrite_result();
if (err)
- printk(KERN_ERR "%s: rf init failed\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy, "rf init failed\n");
return err;
}
0x200 | ar->phy_heavy_clip);
if (err) {
if (ar9170_nag_limiter(ar))
- printk(KERN_ERR "%s: failed to set "
- "heavy clip\n",
- wiphy_name(ar->hw->wiphy));
+ wiphy_err(ar->hw->wiphy,
+ "failed to set heavy clip\n");
}
}
ah = sc->sc_ah;
ath9k_hw_name(ah, hw_name, sizeof(hw_name));
- printk(KERN_INFO
- "%s: %s mem=0x%lx, irq=%d\n",
- wiphy_name(hw->wiphy),
- hw_name,
- (unsigned long)mem, irq);
+ wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n",
+ hw_name, (unsigned long)mem, irq);
return 0;
}
ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name));
- printk(KERN_INFO
- "%s: %s mem=0x%lx, irq=%d\n",
- wiphy_name(hw->wiphy),
- hw_name,
- (unsigned long)mem, pdev->irq);
+ wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n",
+ hw_name, (unsigned long)mem, pdev->irq);
return 0;
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
{
int ret;
- printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
- printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
+ pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
+ pr_info(DRV_COPYRIGHT "\n");
ret = iwlagn_rate_control_register();
if (ret) {
- printk(KERN_ERR DRV_NAME
- "Unable to register rate control algorithm: %d\n", ret);
+ pr_err("Unable to register rate control algorithm: %d\n", ret);
return ret;
}
ret = pci_register_driver(&iwl_driver);
if (ret) {
- printk(KERN_ERR DRV_NAME "Unable to initialize PCI module\n");
+ pr_err("Unable to initialize PCI module\n");
goto error_register;
}
struct ieee80211_hw *hw =
ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
if (hw == NULL) {
- printk(KERN_ERR "%s: Can not allocate network device\n",
+ pr_err("%s: Can not allocate network device\n",
cfg->name);
goto out;
}
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
* space for this driver's private structure */
hw = iwl_alloc_all(cfg, &iwl3945_hw_ops);
if (hw == NULL) {
- printk(KERN_ERR DRV_NAME "Can not allocate network device\n");
+ pr_err("Can not allocate network device\n");
err = -ENOMEM;
goto out;
}
{
int ret;
- printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
- printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
+ pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
+ pr_info(DRV_COPYRIGHT "\n");
ret = iwl3945_rate_control_register();
if (ret) {
- printk(KERN_ERR DRV_NAME
- "Unable to register rate control algorithm: %d\n", ret);
+ pr_err("Unable to register rate control algorithm: %d\n", ret);
return ret;
}
ret = pci_register_driver(&iwl3945_driver);
if (ret) {
- printk(KERN_ERR DRV_NAME "Unable to initialize PCI module\n");
+ pr_err("Unable to initialize PCI module\n");
goto error_register;
}
struct ieee80211_rx_status rx_status;
if (data->idle) {
- printk(KERN_DEBUG "%s: Trying to TX when idle - reject\n",
- wiphy_name(hw->wiphy));
+ wiphy_debug(hw->wiphy, "trying to tx when idle - reject\n");
return false;
}
static int mac80211_hwsim_start(struct ieee80211_hw *hw)
{
struct mac80211_hwsim_data *data = hw->priv;
- printk(KERN_DEBUG "%s:%s\n", wiphy_name(hw->wiphy), __func__);
+ wiphy_debug(hw->wiphy, "%s\n", __func__);
data->started = 1;
return 0;
}
struct mac80211_hwsim_data *data = hw->priv;
data->started = 0;
del_timer(&data->beacon_timer);
- printk(KERN_DEBUG "%s:%s\n", wiphy_name(hw->wiphy), __func__);
+ wiphy_debug(hw->wiphy, "%s\n", __func__);
}
static int mac80211_hwsim_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
- printk(KERN_DEBUG "%s:%s (type=%d mac_addr=%pM)\n",
- wiphy_name(hw->wiphy), __func__, vif->type,
- vif->addr);
+ wiphy_debug(hw->wiphy, "%s (type=%d mac_addr=%pM)\n",
+ __func__, vif->type, vif->addr);
hwsim_set_magic(vif);
return 0;
}
static void mac80211_hwsim_remove_interface(
struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
- printk(KERN_DEBUG "%s:%s (type=%d mac_addr=%pM)\n",
- wiphy_name(hw->wiphy), __func__, vif->type,
- vif->addr);
+ wiphy_debug(hw->wiphy, "%s (type=%d mac_addr=%pM)\n",
+ __func__, vif->type, vif->addr);
hwsim_check_magic(vif);
hwsim_clear_magic(vif);
}
[IEEE80211_SMPS_DYNAMIC] = "dynamic",
};
- printk(KERN_DEBUG "%s:%s (freq=%d/%s idle=%d ps=%d smps=%s)\n",
- wiphy_name(hw->wiphy), __func__,
- conf->channel->center_freq,
- hwsim_chantypes[conf->channel_type],
- !!(conf->flags & IEEE80211_CONF_IDLE),
- !!(conf->flags & IEEE80211_CONF_PS),
- smps_modes[conf->smps_mode]);
+ wiphy_debug(hw->wiphy,
+ "%s (freq=%d/%s idle=%d ps=%d smps=%s)\n",
+ __func__,
+ conf->channel->center_freq,
+ hwsim_chantypes[conf->channel_type],
+ !!(conf->flags & IEEE80211_CONF_IDLE),
+ !!(conf->flags & IEEE80211_CONF_PS),
+ smps_modes[conf->smps_mode]);
data->idle = !!(conf->flags & IEEE80211_CONF_IDLE);
{
struct mac80211_hwsim_data *data = hw->priv;
- printk(KERN_DEBUG "%s:%s\n", wiphy_name(hw->wiphy), __func__);
+ wiphy_debug(hw->wiphy, "%s\n", __func__);
data->rx_filter = 0;
if (*total_flags & FIF_PROMISC_IN_BSS)
hwsim_check_magic(vif);
- printk(KERN_DEBUG "%s:%s(changed=0x%x)\n",
- wiphy_name(hw->wiphy), __func__, changed);
+ wiphy_debug(hw->wiphy, "%s(changed=0x%x)\n", __func__, changed);
if (changed & BSS_CHANGED_BSSID) {
- printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n",
- wiphy_name(hw->wiphy), __func__,
- info->bssid);
+ wiphy_debug(hw->wiphy, "%s: BSSID changed: %pM\n",
+ __func__, info->bssid);
memcpy(vp->bssid, info->bssid, ETH_ALEN);
}
if (changed & BSS_CHANGED_ASSOC) {
- printk(KERN_DEBUG " %s: ASSOC: assoc=%d aid=%d\n",
- wiphy_name(hw->wiphy), info->assoc, info->aid);
+ wiphy_debug(hw->wiphy, " ASSOC: assoc=%d aid=%d\n",
+ info->assoc, info->aid);
vp->assoc = info->assoc;
vp->aid = info->aid;
}
if (changed & BSS_CHANGED_BEACON_INT) {
- printk(KERN_DEBUG " %s: BCNINT: %d\n",
- wiphy_name(hw->wiphy), info->beacon_int);
+ wiphy_debug(hw->wiphy, " BCNINT: %d\n", info->beacon_int);
data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000;
if (WARN_ON(!data->beacon_int))
data->beacon_int = 1;
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
- printk(KERN_DEBUG " %s: ERP_CTS_PROT: %d\n",
- wiphy_name(hw->wiphy), info->use_cts_prot);
+ wiphy_debug(hw->wiphy, " ERP_CTS_PROT: %d\n",
+ info->use_cts_prot);
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
- printk(KERN_DEBUG " %s: ERP_PREAMBLE: %d\n",
- wiphy_name(hw->wiphy), info->use_short_preamble);
+ wiphy_debug(hw->wiphy, " ERP_PREAMBLE: %d\n",
+ info->use_short_preamble);
}
if (changed & BSS_CHANGED_ERP_SLOT) {
- printk(KERN_DEBUG " %s: ERP_SLOT: %d\n",
- wiphy_name(hw->wiphy), info->use_short_slot);
+ wiphy_debug(hw->wiphy, " ERP_SLOT: %d\n", info->use_short_slot);
}
if (changed & BSS_CHANGED_HT) {
- printk(KERN_DEBUG " %s: HT: op_mode=0x%x, chantype=%s\n",
- wiphy_name(hw->wiphy),
- info->ht_operation_mode,
- hwsim_chantypes[info->channel_type]);
+ wiphy_debug(hw->wiphy, " HT: op_mode=0x%x, chantype=%s\n",
+ info->ht_operation_mode,
+ hwsim_chantypes[info->channel_type]);
}
if (changed & BSS_CHANGED_BASIC_RATES) {
- printk(KERN_DEBUG " %s: BASIC_RATES: 0x%llx\n",
- wiphy_name(hw->wiphy),
- (unsigned long long) info->basic_rates);
+ wiphy_debug(hw->wiphy, " BASIC_RATES: 0x%llx\n",
+ (unsigned long long) info->basic_rates);
}
}
struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
- printk(KERN_DEBUG "%s:%s (queue=%d txop=%d cw_min=%d cw_max=%d "
- "aifs=%d)\n",
- wiphy_name(hw->wiphy), __func__, queue,
- params->txop, params->cw_min, params->cw_max, params->aifs);
+ wiphy_debug(hw->wiphy,
+ "%s (queue=%d txop=%d cw_min=%d cw_max=%d aifs=%d)\n",
+ __func__, queue,
+ params->txop, params->cw_min,
+ params->cw_max, params->aifs);
return 0;
}
{
struct ieee80211_conf *conf = &hw->conf;
- printk(KERN_DEBUG "%s:%s (idx=%d)\n",
- wiphy_name(hw->wiphy), __func__, idx);
+ wiphy_debug(hw->wiphy, "%s (idx=%d)\n", __func__, idx);
if (idx != 0)
return -ENOENT;
if (!vp->assoc)
return;
- printk(KERN_DEBUG "%s:%s: send PS-Poll to %pM for aid %d\n",
- wiphy_name(data->hw->wiphy), __func__, vp->bssid, vp->aid);
+ wiphy_debug(data->hw->wiphy,
+ "%s: send PS-Poll to %pM for aid %d\n",
+ __func__, vp->bssid, vp->aid);
skb = dev_alloc_skb(sizeof(*pspoll));
if (!skb)
if (!vp->assoc)
return;
- printk(KERN_DEBUG "%s:%s: send data::nullfunc to %pM ps=%d\n",
- wiphy_name(data->hw->wiphy), __func__, vp->bssid, ps);
+ wiphy_debug(data->hw->wiphy,
+ "%s: send data::nullfunc to %pM ps=%d\n",
+ __func__, vp->bssid, ps);
skb = dev_alloc_skb(sizeof(*hdr));
if (!skb)
break;
}
- printk(KERN_DEBUG "%s: hwaddr %pM registered\n",
- wiphy_name(hw->wiphy),
- hw->wiphy->perm_addr);
+ wiphy_debug(hw->wiphy, "hwaddr %pm registered\n",
+ hw->wiphy->perm_addr);
data->debugfs = debugfs_create_dir("hwsim",
hw->wiphy->debugfsdir);
rxq->rxd = pci_alloc_consistent(priv->pdev, size, &rxq->rxd_dma);
if (rxq->rxd == NULL) {
- printk(KERN_ERR "%s: failed to alloc RX descriptors\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to alloc rx descriptors\n");
return -ENOMEM;
}
memset(rxq->rxd, 0, size);
rxq->buf = kmalloc(MWL8K_RX_DESCS * sizeof(*rxq->buf), GFP_KERNEL);
if (rxq->buf == NULL) {
- printk(KERN_ERR "%s: failed to alloc RX skbuff list\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to alloc rx skbuff list\n");
pci_free_consistent(priv->pdev, size, rxq->rxd, rxq->rxd_dma);
return -ENOMEM;
}
txq->txd = pci_alloc_consistent(priv->pdev, size, &txq->txd_dma);
if (txq->txd == NULL) {
- printk(KERN_ERR "%s: failed to alloc TX descriptors\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to alloc tx descriptors\n");
return -ENOMEM;
}
memset(txq->txd, 0, size);
txq->skb = kmalloc(MWL8K_TX_DESCS * sizeof(*txq->skb), GFP_KERNEL);
if (txq->skb == NULL) {
- printk(KERN_ERR "%s: failed to alloc TX skbuff list\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to alloc tx skbuff list\n");
pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma);
return -ENOMEM;
}
unused++;
}
- printk(KERN_ERR "%s: txq[%d] len=%d head=%d tail=%d "
- "fw_owned=%d drv_owned=%d unused=%d\n",
- wiphy_name(hw->wiphy), i,
- txq->len, txq->head, txq->tail,
- fw_owned, drv_owned, unused);
+ wiphy_err(hw->wiphy,
+ "txq[%d] len=%d head=%d tail=%d "
+ "fw_owned=%d drv_owned=%d unused=%d\n",
+ i,
+ txq->len, txq->head, txq->tail,
+ fw_owned, drv_owned, unused);
}
}
if (timeout) {
WARN_ON(priv->pending_tx_pkts);
if (retry) {
- printk(KERN_NOTICE "%s: tx rings drained\n",
- wiphy_name(hw->wiphy));
+ wiphy_notice(hw->wiphy, "tx rings drained\n");
}
break;
}
if (priv->pending_tx_pkts < oldcount) {
- printk(KERN_NOTICE "%s: waiting for tx rings "
- "to drain (%d -> %d pkts)\n",
- wiphy_name(hw->wiphy), oldcount,
- priv->pending_tx_pkts);
+ wiphy_notice(hw->wiphy,
+ "waiting for tx rings to drain (%d -> %d pkts)\n",
+ oldcount, priv->pending_tx_pkts);
retry = 1;
continue;
}
priv->tx_wait = NULL;
- printk(KERN_ERR "%s: tx rings stuck for %d ms\n",
- wiphy_name(hw->wiphy), MWL8K_TX_WAIT_TIMEOUT_MS);
+ wiphy_err(hw->wiphy, "tx rings stuck for %d ms\n",
+ MWL8K_TX_WAIT_TIMEOUT_MS);
mwl8k_dump_tx_rings(hw);
rc = -ETIMEDOUT;
skb->len, PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(priv->pdev, dma)) {
- printk(KERN_DEBUG "%s: failed to dma map skb, "
- "dropping TX frame.\n", wiphy_name(hw->wiphy));
+ wiphy_debug(hw->wiphy,
+ "failed to dma map skb, dropping TX frame.\n");
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
PCI_DMA_BIDIRECTIONAL);
if (!timeout) {
- printk(KERN_ERR "%s: Command %s timeout after %u ms\n",
- wiphy_name(hw->wiphy),
- mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
- MWL8K_CMD_TIMEOUT_MS);
+ wiphy_err(hw->wiphy, "command %s timeout after %u ms\n",
+ mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
+ MWL8K_CMD_TIMEOUT_MS);
rc = -ETIMEDOUT;
} else {
int ms;
rc = cmd->result ? -EINVAL : 0;
if (rc)
- printk(KERN_ERR "%s: Command %s error 0x%x\n",
- wiphy_name(hw->wiphy),
- mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
- le16_to_cpu(cmd->result));
+ wiphy_err(hw->wiphy, "command %s error 0x%x\n",
+ mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
+ le16_to_cpu(cmd->result));
else if (ms > 2000)
- printk(KERN_NOTICE "%s: Command %s took %d ms\n",
- wiphy_name(hw->wiphy),
- mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
- ms);
+ wiphy_notice(hw->wiphy, "command %s took %d ms\n",
+ mwl8k_cmd_name(cmd->code,
+ buf, sizeof(buf)),
+ ms);
}
return rc;
int rc;
if (!priv->radio_on) {
- printk(KERN_DEBUG "%s: dropped TX frame since radio "
- "disabled\n", wiphy_name(hw->wiphy));
+ wiphy_debug(hw->wiphy,
+ "dropped TX frame since radio disabled\n");
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
rc = request_irq(priv->pdev->irq, mwl8k_interrupt,
IRQF_SHARED, MWL8K_NAME, hw);
if (rc) {
- printk(KERN_ERR "%s: failed to register IRQ handler\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to register irq handler\n");
return -EIO;
}
* mode. (Sniffer mode is only used on STA firmware.)
*/
if (priv->sniffer_enabled) {
- printk(KERN_INFO "%s: unable to create STA "
- "interface due to sniffer mode being enabled\n",
- wiphy_name(hw->wiphy));
+ wiphy_info(hw->wiphy,
+ "unable to create STA interface because sniffer mode is enabled\n");
return -EINVAL;
}
*/
if (!list_empty(&priv->vif_list)) {
if (net_ratelimit())
- printk(KERN_INFO "%s: not enabling sniffer "
- "mode because STA interface is active\n",
- wiphy_name(hw->wiphy));
+ wiphy_info(hw->wiphy,
+ "not enabling sniffer mode because STA interface is active\n");
return 0;
}
priv->sram = pci_iomap(pdev, 0, 0x10000);
if (priv->sram == NULL) {
- printk(KERN_ERR "%s: Cannot map device SRAM\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot map device sram\n");
goto err_iounmap;
}
if (priv->regs == NULL) {
priv->regs = pci_iomap(pdev, 2, 0x10000);
if (priv->regs == NULL) {
- printk(KERN_ERR "%s: Cannot map device registers\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot map device registers\n");
goto err_iounmap;
}
}
/* Ask userland hotplug daemon for the device firmware */
rc = mwl8k_request_firmware(priv);
if (rc) {
- printk(KERN_ERR "%s: Firmware files not found\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "firmware files not found\n");
goto err_stop_firmware;
}
/* Load firmware into hardware */
rc = mwl8k_load_firmware(hw);
if (rc) {
- printk(KERN_ERR "%s: Cannot start firmware\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot start firmware\n");
goto err_stop_firmware;
}
if (priv->ap_fw) {
priv->rxd_ops = priv->device_info->ap_rxd_ops;
if (priv->rxd_ops == NULL) {
- printk(KERN_ERR "%s: Driver does not have AP "
- "firmware image support for this hardware\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy,
+ "Driver does not have AP firmware image support for this hardware\n");
goto err_stop_firmware;
}
} else {
rc = request_irq(priv->pdev->irq, mwl8k_interrupt,
IRQF_SHARED, MWL8K_NAME, hw);
if (rc) {
- printk(KERN_ERR "%s: failed to register IRQ handler\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to register irq handler\n");
goto err_free_queues;
}
rc = mwl8k_cmd_get_hw_spec_sta(hw);
}
if (rc) {
- printk(KERN_ERR "%s: Cannot initialise firmware\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot initialise firmware\n");
goto err_free_irq;
}
/* Turn radio off */
rc = mwl8k_cmd_radio_disable(hw);
if (rc) {
- printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot disable\n");
goto err_free_irq;
}
/* Clear MAC address */
rc = mwl8k_cmd_set_mac_addr(hw, NULL, "\x00\x00\x00\x00\x00\x00");
if (rc) {
- printk(KERN_ERR "%s: Cannot clear MAC address\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot clear mac address\n");
goto err_free_irq;
}
rc = ieee80211_register_hw(hw);
if (rc) {
- printk(KERN_ERR "%s: Cannot register device\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot register device\n");
goto err_free_queues;
}
- printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n",
- wiphy_name(hw->wiphy), priv->device_info->part_name,
- priv->hw_rev, hw->wiphy->perm_addr,
- priv->ap_fw ? "AP" : "STA",
- (priv->fw_rev >> 24) & 0xff, (priv->fw_rev >> 16) & 0xff,
- (priv->fw_rev >> 8) & 0xff, priv->fw_rev & 0xff);
+ wiphy_info(hw->wiphy, "%s v%d, %pm, %s firmware %u.%u.%u.%u\n",
+ priv->device_info->part_name,
+ priv->hw_rev, hw->wiphy->perm_addr,
+ priv->ap_fw ? "AP" : "STA",
+ (priv->fw_rev >> 24) & 0xff, (priv->fw_rev >> 16) & 0xff,
+ (priv->fw_rev >> 8) & 0xff, priv->fw_rev & 0xff);
return 0;
case NL80211_IFTYPE_MONITOR:
if (priv->broken_monitor && !force_monitor) {
- printk(KERN_WARNING "%s: Monitor mode support is "
- "buggy in this firmware, not enabling\n",
- wiphy_name(wiphy));
+ wiphy_warn(wiphy,
+ "Monitor mode support is buggy in this firmware, not enabling\n");
err = -EINVAL;
}
break;
continue;
if (list->channels[i].data != CHAN_HAS_ALL) {
- printk(KERN_ERR "%s:%s%s%s is/are missing for "
- "channel:%d [%d MHz].\n",
- wiphy_name(dev->wiphy),
- (list->channels[i].data & CHAN_HAS_CAL ? "" :
- " [iqauto calibration data]"),
- (list->channels[i].data & CHAN_HAS_LIMIT ? "" :
- " [output power limits]"),
- (list->channels[i].data & CHAN_HAS_CURVE ? "" :
- " [curve data]"),
- list->channels[i].index, list->channels[i].freq);
+ wiphy_err(dev->wiphy,
+ "%s%s%s is/are missing for channel:%d [%d MHz].\n",
+ (list->channels[i].data & CHAN_HAS_CAL ? "" :
+ " [iqauto calibration data]"),
+ (list->channels[i].data & CHAN_HAS_LIMIT ? "" :
+ " [output power limits]"),
+ (list->channels[i].data & CHAN_HAS_CURVE ? "" :
+ " [curve data]"),
+ list->channels[i].index, list->channels[i].freq);
continue;
}
}
if (j == 0) {
- printk(KERN_ERR "%s: Disabling totally damaged %s band.\n",
- wiphy_name(dev->wiphy), (band == IEEE80211_BAND_2GHZ) ?
- "2 GHz" : "5 GHz");
+ wiphy_err(dev->wiphy, "disabling totally damaged %d GHz band\n",
+ (band == IEEE80211_BAND_2GHZ) ? 2 : 5);
ret = -ENODATA;
goto err_out;
if ((priv->iq_autocal_len != priv->curve_data->entries) ||
(priv->iq_autocal_len != priv->output_limit->entries))
- printk(KERN_ERR "%s: Unsupported or damaged EEPROM detected. "
- "You may not be able to use all channels.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy,
+ "Unsupported or damaged EEPROM detected. "
+ "You may not be able to use all channels.\n");
max_channel_num = max_t(unsigned int, priv->output_limit->entries,
priv->iq_autocal_len);
int i;
if (len != (entry_size * num_entries)) {
- printk(KERN_ERR "%s: unknown rssi calibration data packing "
- " type:(%x) len:%d.\n",
- wiphy_name(dev->wiphy), type, len);
+ wiphy_err(dev->wiphy,
+ "unknown rssi calibration data packing type:(%x) len:%d.\n",
+ type, len);
print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE,
data, len);
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "please report this issue.\n");
return;
}
struct pda_country *country;
if (len != sizeof(*country)) {
- printk(KERN_ERR "%s: found possible invalid default country "
- "eeprom entry. (entry size: %d)\n",
- wiphy_name(dev->wiphy), len);
+ wiphy_err(dev->wiphy,
+ "found possible invalid default country eeprom entry. (entry size: %d)\n",
+ len);
print_hex_dump_bytes("country:", DUMP_PREFIX_NONE,
data, len);
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "please report this issue.\n");
return;
}
return -EINVAL;
if (data[0] != 0) {
- printk(KERN_ERR "%s: unknown output power db revision:%x\n",
- wiphy_name(dev->wiphy), data[0]);
+ wiphy_err(dev->wiphy, "unknown output power db revision:%x\n",
+ data[0]);
return -EINVAL;
}
err = p54_convert_rev1(dev, curve_data);
break;
default:
- printk(KERN_ERR "%s: unknown curve data "
- "revision %d\n",
- wiphy_name(dev->wiphy),
- curve_data->cal_method_rev);
+ wiphy_err(dev->wiphy,
+ "unknown curve data revision %d\n",
+ curve_data->cal_method_rev);
err = -ENODEV;
break;
}
if (!synth || !priv->iq_autocal || !priv->output_limit ||
!priv->curve_data) {
- printk(KERN_ERR "%s: not all required entries found in eeprom!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy,
+ "not all required entries found in eeprom!\n");
err = -EINVAL;
goto err;
}
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
u8 perm_addr[ETH_ALEN];
- printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n",
- wiphy_name(dev->wiphy));
+ wiphy_warn(dev->wiphy,
+ "invalid hwaddr! using randomly generated mac addr\n");
random_ether_addr(perm_addr);
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
}
- printk(KERN_INFO "%s: hwaddr %pM, MAC:isl38%02x RF:%s\n",
- wiphy_name(dev->wiphy), dev->wiphy->perm_addr, priv->version,
- p54_rf_chips[priv->rxhw]);
+ wiphy_info(dev->wiphy, "hwaddr %pm, mac:isl38%02x rf:%s\n",
+ dev->wiphy->perm_addr, priv->version,
+ p54_rf_chips[priv->rxhw]);
return 0;
priv->output_limit = NULL;
priv->curve_data = NULL;
- printk(KERN_ERR "%s: eeprom parse failed!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "eeprom parse failed!\n");
return err;
}
EXPORT_SYMBOL_GPL(p54_parse_eeprom);
case FW_LM20:
case FW_LM87: {
char *iftype = (char *)bootrec->data;
- printk(KERN_INFO "%s: p54 detected a LM%c%c "
- "firmware\n",
- wiphy_name(priv->hw->wiphy),
- iftype[2], iftype[3]);
+ wiphy_info(priv->hw->wiphy,
+ "p54 detected a LM%c%c firmware\n",
+ iftype[2], iftype[3]);
break;
}
case FW_FMAC:
default:
- printk(KERN_ERR "%s: unsupported firmware\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy,
+ "unsupported firmware\n");
return -ENODEV;
}
break;
}
if (fw_version)
- printk(KERN_INFO "%s: FW rev %s - Softmac protocol %x.%x\n",
- wiphy_name(priv->hw->wiphy), fw_version,
- priv->fw_var >> 8, priv->fw_var & 0xff);
+ wiphy_info(priv->hw->wiphy,
+ "fw rev %s - softmac protocol %x.%x\n",
+ fw_version, priv->fw_var >> 8, priv->fw_var & 0xff);
if (priv->fw_var < 0x500)
- printk(KERN_INFO "%s: you are using an obsolete firmware. "
- "visit http://wireless.kernel.org/en/users/Drivers/p54 "
- "and grab one for \"kernel >= 2.6.28\"!\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_info(priv->hw->wiphy,
+ "you are using an obsolete firmware. "
+ "visit http://wireless.kernel.org/en/users/Drivers/p54 "
+ "and grab one for \"kernel >= 2.6.28\"!\n");
if (priv->fw_var >= 0x300) {
/* Firmware supports QoS, use it! */
priv->hw->queues = P54_QUEUE_AC_NUM;
}
- printk(KERN_INFO "%s: cryptographic accelerator "
- "WEP:%s, TKIP:%s, CCMP:%s\n", wiphy_name(priv->hw->wiphy),
- (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" :
- "no", (priv->privacy_caps & (BR_DESC_PRIV_CAP_TKIP |
- BR_DESC_PRIV_CAP_MICHAEL)) ? "YES" : "no",
- (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) ?
- "YES" : "no");
+ wiphy_info(priv->hw->wiphy,
+ "cryptographic accelerator WEP:%s, TKIP:%s, CCMP:%s\n",
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" : "no",
+ (priv->privacy_caps &
+ (BR_DESC_PRIV_CAP_TKIP | BR_DESC_PRIV_CAP_MICHAEL))
+ ? "YES" : "no",
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)
+ ? "YES" : "no");
if (priv->rx_keycache_size) {
/*
if (!wait_for_completion_interruptible_timeout(
&priv->eeprom_comp, HZ)) {
- printk(KERN_ERR "%s: device does not respond!\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy, "device does not respond!\n");
ret = -EBUSY;
}
priv->eeprom = NULL;
return 0;
err:
- printk(KERN_ERR "%s: frequency change to channel %d failed.\n",
- wiphy_name(priv->hw->wiphy), ieee80211_frequency_to_channel(
- priv->hw->conf.channel->center_freq));
+ wiphy_err(priv->hw->wiphy, "frequency change to channel %d failed.\n",
+ ieee80211_frequency_to_channel(
+ priv->hw->conf.channel->center_freq));
dev_kfree_skb_any(skb);
return -EINVAL;
break;
default:
- printk(KERN_ERR "%s: invalid cryptographic algorithm: %d\n",
- wiphy_name(priv->hw->wiphy), algo);
+ wiphy_err(priv->hw->wiphy,
+ "invalid cryptographic algorithm: %d\n", algo);
dev_kfree_skb(skb);
return -EINVAL;
}
err = p54_set_leds(priv);
if (err && net_ratelimit())
- printk(KERN_ERR "%s: failed to update LEDs (%d).\n",
- wiphy_name(priv->hw->wiphy), err);
+ wiphy_err(priv->hw->wiphy,
+ "failed to update leds (%d).\n", err);
if (rerun)
ieee80211_queue_delayed_work(priv->hw, &priv->led_work,
err = led_classdev_register(wiphy_dev(priv->hw->wiphy), &led->led_dev);
if (err)
- printk(KERN_ERR "%s: Failed to register %s LED.\n",
- wiphy_name(priv->hw->wiphy), name);
+ wiphy_err(priv->hw->wiphy,
+ "failed to register %s led.\n", name);
else
led->registered = 1;
P54P_READ(dev_int);
if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
- printk(KERN_ERR "%s: Cannot boot firmware!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "cannot boot firmware!\n");
p54p_stop(dev);
return -ETIMEDOUT;
}
u32 largest_hole = 0, free;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) ---\n",
- wiphy_name(priv->hw->wiphy), skb_queue_len(&priv->tx_queue));
+ wiphy_debug(priv->hw->wiphy, "/ --- tx queue dump (%d entries) ---\n",
+ skb_queue_len(&priv->tx_queue));
prev_addr = priv->rx_start;
skb_queue_walk(&priv->tx_queue, skb) {
hdr = (void *) skb->data;
free = range->start_addr - prev_addr;
- printk(KERN_DEBUG "%s: | [%02d] => [skb:%p skb_len:0x%04x "
- "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} "
- "mem:{start:%04x end:%04x, free:%d}]\n",
- wiphy_name(priv->hw->wiphy), i++, skb, skb->len,
- le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len),
- le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type),
- range->start_addr, range->end_addr, free);
+ wiphy_debug(priv->hw->wiphy,
+ "| [%02d] => [skb:%p skb_len:0x%04x "
+ "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} "
+ "mem:{start:%04x end:%04x, free:%d}]\n",
+ i++, skb, skb->len,
+ le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len),
+ le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type),
+ range->start_addr, range->end_addr, free);
prev_addr = range->end_addr;
largest_hole = max(largest_hole, free);
}
free = priv->rx_end - prev_addr;
largest_hole = max(largest_hole, free);
- printk(KERN_DEBUG "%s: \\ --- [free: %d], largest free block: %d ---\n",
- wiphy_name(priv->hw->wiphy), free, largest_hole);
+ wiphy_debug(priv->hw->wiphy,
+ "\\ --- [free: %d], largest free block: %d ---\n",
+ free, largest_hole);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
}
#endif /* P54_MM_DEBUG */
case P54_TRAP_BEACON_TX:
break;
case P54_TRAP_RADAR:
- printk(KERN_INFO "%s: radar (freq:%d MHz)\n",
- wiphy_name(priv->hw->wiphy), freq);
+ wiphy_info(priv->hw->wiphy, "radar (freq:%d mhz)\n", freq);
break;
case P54_TRAP_NO_BEACON:
if (priv->vif)
wiphy_rfkill_set_hw_state(priv->hw->wiphy, false);
break;
default:
- printk(KERN_INFO "%s: received event:%x freq:%d\n",
- wiphy_name(priv->hw->wiphy), event, freq);
+ wiphy_info(priv->hw->wiphy, "received event:%x freq:%d\n",
+ event, freq);
break;
}
}
p54_rx_eeprom_readback(priv, skb);
break;
default:
- printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n",
- wiphy_name(priv->hw->wiphy), le16_to_cpu(hdr->type));
+ wiphy_debug(priv->hw->wiphy,
+ "not handling 0x%02x type control frame\n",
+ le16_to_cpu(hdr->type));
break;
}
return 0;
/* check success of reset */
if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
- printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "reset timeout!\n");
return -ETIMEDOUT;
}
&priv->rx_ring_dma);
if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
- printk(KERN_ERR "%s: Cannot allocate RX ring\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "cannot allocate rx ring\n");
return -ENOMEM;
}
ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma);
if (!ring || (unsigned long)ring & 0xFF) {
- printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n",
- wiphy_name(dev->wiphy), prio);
+ wiphy_err(dev->wiphy, "cannot allocate tx ring (prio = %d)\n",
+ prio);
return -ENOMEM;
}
ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (ret) {
- printk(KERN_ERR "%s: failed to register IRQ handler\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "failed to register irq handler\n");
goto err_free_rings;
}
goto err_iounmap;
}
- printk(KERN_INFO "%s: hwaddr %pM, %s + %s\n",
- wiphy_name(dev->wiphy), mac_addr,
- chip_name, priv->rf->name);
+ wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n",
+ mac_addr, chip_name, priv->rf->name);
return 0;
} while (--i);
if (!i) {
- printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "reset timeout!\n");
return -ETIMEDOUT;
}
} while (--i);
if (!i) {
- printk(KERN_ERR "%s: eeprom reset timeout!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "eeprom reset timeout!\n");
return -ETIMEDOUT;
}
mutex_init(&priv->conf_mutex);
skb_queue_head_init(&priv->b_tx_status.queue);
- printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s, rfkill mask %d\n",
- wiphy_name(dev->wiphy), mac_addr,
- chip_name, priv->asic_rev, priv->rf->name, priv->rfkill_mask);
+ wiphy_info(dev->wiphy, "hwaddr %pm, %s v%d + %s, rfkill mask %d\n",
+ mac_addr, chip_name, priv->asic_rev, priv->rf->name,
+ priv->rfkill_mask);
#ifdef CONFIG_RTL8187_LEDS
eeprom_93cx6_read(&eeprom, 0x3F, ®);
rtl8225_write(dev, 0x02, 0x044d);
msleep(100);
if (!(rtl8225_read(dev, 6) & (1 << 7)))
- printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
- wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
+ wiphy_warn(dev->wiphy, "rf calibration failed! %x\n",
+ rtl8225_read(dev, 6));
}
rtl8225_write(dev, 0x0, 0x127);
rtl8225_write(dev, 0x02, 0x044D);
msleep(100);
if (!(rtl8225_read(dev, 6) & (1 << 7)))
- printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
- wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
+ wiphy_warn(dev->wiphy, "rf calibration failed! %x\n",
+ rtl8225_read(dev, 6));
}
msleep(200);
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff