#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+
+#define TEST_FIRMWARE_NAME "test-firmware.bin"
+#define TEST_FIRMWARE_NUM_REQS 4
static DEFINE_MUTEX(test_fw_mutex);
static const struct firmware *test_firmware;
+struct test_batched_req {
+ u8 idx;
+ int rc;
+ bool sent;
+ const struct firmware *fw;
+ const char *name;
+ struct completion completion;
+ struct task_struct *task;
+ struct device *dev;
+};
+
+/**
+ * test_config - represents configuration for the test for different triggers
+ *
+ * @name: the name of the firmware file to look for
+ * @sync_direct: when the sync trigger is used if this is true
+ * request_firmware_direct() will be used instead.
+ * @send_uevent: whether or not to send a uevent for async requests
+ * @num_requests: number of requests to try per test case. This is trigger
+ * specific.
+ * @reqs: stores all requests information
+ * @read_fw_idx: index of thread from which we want to read firmware results
+ * from through the read_fw trigger.
+ * @test_result: a test may use this to collect the result from the call
+ * of the request_firmware*() calls used in their tests. In order of
+ * priority we always keep first any setup error. If no setup errors were
+ * found then we move on to the first error encountered while running the
+ * API. Note that for async calls this typically will be a successful
+ * result (0) unless of course you've used bogus parameters, or the system
+ * is out of memory. In the async case the callback is expected to do a
+ * bit more homework to figure out what happened, unfortunately the only
+ * information passed today on error is the fact that no firmware was
+ * found so we can only assume -ENOENT on async calls if the firmware is
+ * NULL.
+ *
+ * Errors you can expect:
+ *
+ * API specific:
+ *
+ * 0: success for sync, for async it means request was sent
+ * -EINVAL: invalid parameters or request
+ * -ENOENT: files not found
+ *
+ * System environment:
+ *
+ * -ENOMEM: memory pressure on system
+ * -ENODEV: out of number of devices to test
+ * -EINVAL: an unexpected error has occurred
+ * @req_firmware: if @sync_direct is true this is set to
+ * request_firmware_direct(), otherwise request_firmware()
+ */
+struct test_config {
+ char *name;
+ bool sync_direct;
+ bool send_uevent;
+ u8 num_requests;
+ u8 read_fw_idx;
+
+ /*
+ * These below don't belong her but we'll move them once we create
+ * a struct fw_test_device and stuff the misc_dev under there later.
+ */
+ struct test_batched_req *reqs;
+ int test_result;
+ int (*req_firmware)(const struct firmware **fw, const char *name,
+ struct device *device);
+};
+
+struct test_config *test_fw_config;
+
static ssize_t test_fw_misc_read(struct file *f, char __user *buf,
size_t size, loff_t *offset)
{
.read = test_fw_misc_read,
};
+static void __test_release_all_firmware(void)
+{
+ struct test_batched_req *req;
+ u8 i;
+
+ if (!test_fw_config->reqs)
+ return;
+
+ for (i = 0; i < test_fw_config->num_requests; i++) {
+ req = &test_fw_config->reqs[i];
+ if (req->fw)
+ release_firmware(req->fw);
+ }
+
+ vfree(test_fw_config->reqs);
+ test_fw_config->reqs = NULL;
+}
+
+static void test_release_all_firmware(void)
+{
+ mutex_lock(&test_fw_mutex);
+ __test_release_all_firmware();
+ mutex_unlock(&test_fw_mutex);
+}
+
+
+static void __test_firmware_config_free(void)
+{
+ __test_release_all_firmware();
+ kfree_const(test_fw_config->name);
+ test_fw_config->name = NULL;
+}
+
+/*
+ * XXX: move to kstrncpy() once merged.
+ *
+ * Users should use kfree_const() when freeing these.
+ */
+static int __kstrncpy(char **dst, const char *name, size_t count, gfp_t gfp)
+{
+ *dst = kstrndup(name, count, gfp);
+ if (!*dst)
+ return -ENOSPC;
+ return count;
+}
+
+static int __test_firmware_config_init(void)
+{
+ int ret;
+
+ ret = __kstrncpy(&test_fw_config->name, TEST_FIRMWARE_NAME,
+ strlen(TEST_FIRMWARE_NAME), GFP_KERNEL);
+ if (ret < 0)
+ goto out;
+
+ test_fw_config->num_requests = TEST_FIRMWARE_NUM_REQS;
+ test_fw_config->send_uevent = true;
+ test_fw_config->sync_direct = false;
+ test_fw_config->req_firmware = request_firmware;
+ test_fw_config->test_result = 0;
+ test_fw_config->reqs = NULL;
+
+ return 0;
+
+out:
+ __test_firmware_config_free();
+ return ret;
+}
+
+static ssize_t reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+
+ mutex_lock(&test_fw_mutex);
+
+ __test_firmware_config_free();
+
+ ret = __test_firmware_config_init();
+ if (ret < 0) {
+ ret = -ENOMEM;
+ pr_err("could not alloc settings for config trigger: %d\n",
+ ret);
+ goto out;
+ }
+
+ pr_info("reset\n");
+ ret = count;
+
+out:
+ mutex_unlock(&test_fw_mutex);
+
+ return ret;
+}
+static DEVICE_ATTR_WO(reset);
+
+static ssize_t config_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int len = 0;
+
+ mutex_lock(&test_fw_mutex);
+
+ len += snprintf(buf, PAGE_SIZE,
+ "Custom trigger configuration for: %s\n",
+ dev_name(dev));
+
+ if (test_fw_config->name)
+ len += snprintf(buf+len, PAGE_SIZE,
+ "name:\t%s\n",
+ test_fw_config->name);
+ else
+ len += snprintf(buf+len, PAGE_SIZE,
+ "name:\tEMTPY\n");
+
+ len += snprintf(buf+len, PAGE_SIZE,
+ "num_requests:\t%u\n", test_fw_config->num_requests);
+
+ len += snprintf(buf+len, PAGE_SIZE,
+ "send_uevent:\t\t%s\n",
+ test_fw_config->send_uevent ?
+ "FW_ACTION_HOTPLUG" :
+ "FW_ACTION_NOHOTPLUG");
+ len += snprintf(buf+len, PAGE_SIZE,
+ "sync_direct:\t\t%s\n",
+ test_fw_config->sync_direct ? "true" : "false");
+ len += snprintf(buf+len, PAGE_SIZE,
+ "read_fw_idx:\t%u\n", test_fw_config->read_fw_idx);
+
+ mutex_unlock(&test_fw_mutex);
+
+ return len;
+}
+static DEVICE_ATTR_RO(config);
+
+static ssize_t config_name_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+
+ mutex_lock(&test_fw_mutex);
+ kfree_const(test_fw_config->name);
+ ret = __kstrncpy(&test_fw_config->name, buf, count, GFP_KERNEL);
+ mutex_unlock(&test_fw_mutex);
+
+ return ret;
+}
+
+/*
+ * As per sysfs_kf_seq_show() the buf is max PAGE_SIZE.
+ */
+static ssize_t config_test_show_str(char *dst,
+ char *src)
+{
+ int len;
+
+ mutex_lock(&test_fw_mutex);
+ len = snprintf(dst, PAGE_SIZE, "%s\n", src);
+ mutex_unlock(&test_fw_mutex);
+
+ return len;
+}
+
+static int test_dev_config_update_bool(const char *buf, size_t size,
+ bool *cfg)
+{
+ int ret;
+
+ mutex_lock(&test_fw_mutex);
+ if (strtobool(buf, cfg) < 0)
+ ret = -EINVAL;
+ else
+ ret = size;
+ mutex_unlock(&test_fw_mutex);
+
+ return ret;
+}
+
+static ssize_t
+test_dev_config_show_bool(char *buf,
+ bool config)
+{
+ bool val;
+
+ mutex_lock(&test_fw_mutex);
+ val = config;
+ mutex_unlock(&test_fw_mutex);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t test_dev_config_show_int(char *buf, int cfg)
+{
+ int val;
+
+ mutex_lock(&test_fw_mutex);
+ val = cfg;
+ mutex_unlock(&test_fw_mutex);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
+{
+ int ret;
+ long new;
+
+ ret = kstrtol(buf, 10, &new);
+ if (ret)
+ return ret;
+
+ if (new > U8_MAX)
+ return -EINVAL;
+
+ mutex_lock(&test_fw_mutex);
+ *(u8 *)cfg = new;
+ mutex_unlock(&test_fw_mutex);
+
+ /* Always return full write size even if we didn't consume all */
+ return size;
+}
+
+static ssize_t test_dev_config_show_u8(char *buf, u8 cfg)
+{
+ u8 val;
+
+ mutex_lock(&test_fw_mutex);
+ val = cfg;
+ mutex_unlock(&test_fw_mutex);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t config_name_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return config_test_show_str(buf, test_fw_config->name);
+}
+static DEVICE_ATTR(config_name, 0644, config_name_show, config_name_store);
+
+static ssize_t config_num_requests_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rc;
+
+ mutex_lock(&test_fw_mutex);
+ if (test_fw_config->reqs) {
+ pr_err("Must call release_all_firmware prior to changing config\n");
+ rc = -EINVAL;
+ goto out;
+ }
+ mutex_unlock(&test_fw_mutex);
+
+ rc = test_dev_config_update_u8(buf, count,
+ &test_fw_config->num_requests);
+
+out:
+ return rc;
+}
+
+static ssize_t config_num_requests_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return test_dev_config_show_u8(buf, test_fw_config->num_requests);
+}
+static DEVICE_ATTR(config_num_requests, 0644, config_num_requests_show,
+ config_num_requests_store);
+
+static ssize_t config_sync_direct_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rc = test_dev_config_update_bool(buf, count,
+ &test_fw_config->sync_direct);
+
+ if (rc == count)
+ test_fw_config->req_firmware = test_fw_config->sync_direct ?
+ request_firmware_direct :
+ request_firmware;
+ return rc;
+}
+
+static ssize_t config_sync_direct_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return test_dev_config_show_bool(buf, test_fw_config->sync_direct);
+}
+static DEVICE_ATTR(config_sync_direct, 0644, config_sync_direct_show,
+ config_sync_direct_store);
+
+static ssize_t config_send_uevent_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return test_dev_config_update_bool(buf, count,
+ &test_fw_config->send_uevent);
+}
+
+static ssize_t config_send_uevent_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return test_dev_config_show_bool(buf, test_fw_config->send_uevent);
+}
+static DEVICE_ATTR(config_send_uevent, 0644, config_send_uevent_show,
+ config_send_uevent_store);
+
+static ssize_t config_read_fw_idx_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return test_dev_config_update_u8(buf, count,
+ &test_fw_config->read_fw_idx);
+}
+
+static ssize_t config_read_fw_idx_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return test_dev_config_show_u8(buf, test_fw_config->read_fw_idx);
+}
+static DEVICE_ATTR(config_read_fw_idx, 0644, config_read_fw_idx_show,
+ config_read_fw_idx_store);
+
+
static ssize_t trigger_request_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
}
static DEVICE_ATTR_WO(trigger_custom_fallback);
+static int test_fw_run_batch_request(void *data)
+{
+ struct test_batched_req *req = data;
+
+ if (!req) {
+ test_fw_config->test_result = -EINVAL;
+ return -EINVAL;
+ }
+
+ req->rc = test_fw_config->req_firmware(&req->fw, req->name, req->dev);
+ if (req->rc) {
+ pr_info("#%u: batched sync load failed: %d\n",
+ req->idx, req->rc);
+ if (!test_fw_config->test_result)
+ test_fw_config->test_result = req->rc;
+ } else if (req->fw) {
+ req->sent = true;
+ pr_info("#%u: batched sync loaded %zu\n",
+ req->idx, req->fw->size);
+ }
+ complete(&req->completion);
+
+ req->task = NULL;
+
+ return 0;
+}
+
+/*
+ * We use a kthread as otherwise the kernel serializes all our sync requests
+ * and we would not be able to mimic batched requests on a sync call. Batched
+ * requests on a sync call can for instance happen on a device driver when
+ * multiple cards are used and firmware loading happens outside of probe.
+ */
+static ssize_t trigger_batched_requests_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct test_batched_req *req;
+ int rc;
+ u8 i;
+
+ mutex_lock(&test_fw_mutex);
+
+ test_fw_config->reqs = vzalloc(sizeof(struct test_batched_req) *
+ test_fw_config->num_requests * 2);
+ if (!test_fw_config->reqs) {
+ rc = -ENOMEM;
+ goto out_unlock;
+ }
+
+ pr_info("batched sync firmware loading '%s' %u times\n",
+ test_fw_config->name, test_fw_config->num_requests);
+
+ for (i = 0; i < test_fw_config->num_requests; i++) {
+ req = &test_fw_config->reqs[i];
+ if (!req) {
+ WARN_ON(1);
+ rc = -ENOMEM;
+ goto out_bail;
+ }
+ req->fw = NULL;
+ req->idx = i;
+ req->name = test_fw_config->name;
+ req->dev = dev;
+ init_completion(&req->completion);
+ req->task = kthread_run(test_fw_run_batch_request, req,
+ "%s-%u", KBUILD_MODNAME, req->idx);
+ if (!req->task || IS_ERR(req->task)) {
+ pr_err("Setting up thread %u failed\n", req->idx);
+ req->task = NULL;
+ rc = -ENOMEM;
+ goto out_bail;
+ }
+ }
+
+ rc = count;
+
+ /*
+ * We require an explicit release to enable more time and delay of
+ * calling release_firmware() to improve our chances of forcing a
+ * batched request. If we instead called release_firmware() right away
+ * then we might miss on an opportunity of having a successful firmware
+ * request pass on the opportunity to be come a batched request.
+ */
+
+out_bail:
+ for (i = 0; i < test_fw_config->num_requests; i++) {
+ req = &test_fw_config->reqs[i];
+ if (req->task || req->sent)
+ wait_for_completion(&req->completion);
+ }
+
+ /* Override any worker error if we had a general setup error */
+ if (rc < 0)
+ test_fw_config->test_result = rc;
+
+out_unlock:
+ mutex_unlock(&test_fw_mutex);
+
+ return rc;
+}
+static DEVICE_ATTR_WO(trigger_batched_requests);
+
+/*
+ * We wait for each callback to return with the lock held, no need to lock here
+ */
+static void trigger_batched_cb(const struct firmware *fw, void *context)
+{
+ struct test_batched_req *req = context;
+
+ if (!req) {
+ test_fw_config->test_result = -EINVAL;
+ return;
+ }
+
+ /* forces *some* batched requests to queue up */
+ if (!req->idx)
+ ssleep(2);
+
+ req->fw = fw;
+
+ /*
+ * Unfortunately the firmware API gives us nothing other than a null FW
+ * if the firmware was not found on async requests. Best we can do is
+ * just assume -ENOENT. A better API would pass the actual return
+ * value to the callback.
+ */
+ if (!fw && !test_fw_config->test_result)
+ test_fw_config->test_result = -ENOENT;
+
+ complete(&req->completion);
+}
+
+static
+ssize_t trigger_batched_requests_async_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct test_batched_req *req;
+ bool send_uevent;
+ int rc;
+ u8 i;
+
+ mutex_lock(&test_fw_mutex);
+
+ test_fw_config->reqs = vzalloc(sizeof(struct test_batched_req) *
+ test_fw_config->num_requests * 2);
+ if (!test_fw_config->reqs) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ pr_info("batched loading '%s' custom fallback mechanism %u times\n",
+ test_fw_config->name, test_fw_config->num_requests);
+
+ send_uevent = test_fw_config->send_uevent ? FW_ACTION_HOTPLUG :
+ FW_ACTION_NOHOTPLUG;
+
+ for (i = 0; i < test_fw_config->num_requests; i++) {
+ req = &test_fw_config->reqs[i];
+ if (!req) {
+ WARN_ON(1);
+ goto out_bail;
+ }
+ req->name = test_fw_config->name;
+ req->fw = NULL;
+ req->idx = i;
+ init_completion(&req->completion);
+ rc = request_firmware_nowait(THIS_MODULE, send_uevent,
+ req->name,
+ dev, GFP_KERNEL, req,
+ trigger_batched_cb);
+ if (rc) {
+ pr_info("#%u: batched async load failed setup: %d\n",
+ i, rc);
+ req->rc = rc;
+ goto out_bail;
+ } else
+ req->sent = true;
+ }
+
+ rc = count;
+
+out_bail:
+
+ /*
+ * We require an explicit release to enable more time and delay of
+ * calling release_firmware() to improve our chances of forcing a
+ * batched request. If we instead called release_firmware() right away
+ * then we might miss on an opportunity of having a successful firmware
+ * request pass on the opportunity to be come a batched request.
+ */
+
+ for (i = 0; i < test_fw_config->num_requests; i++) {
+ req = &test_fw_config->reqs[i];
+ if (req->sent)
+ wait_for_completion(&req->completion);
+ }
+
+ /* Override any worker error if we had a general setup error */
+ if (rc < 0)
+ test_fw_config->test_result = rc;
+
+out:
+ mutex_unlock(&test_fw_mutex);
+
+ return rc;
+}
+static DEVICE_ATTR_WO(trigger_batched_requests_async);
+
+static ssize_t test_result_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return test_dev_config_show_int(buf, test_fw_config->test_result);
+}
+static DEVICE_ATTR_RO(test_result);
+
+static ssize_t release_all_firmware_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ test_release_all_firmware();
+ return count;
+}
+static DEVICE_ATTR_WO(release_all_firmware);
+
+static ssize_t read_firmware_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct test_batched_req *req;
+ u8 idx;
+ ssize_t rc = 0;
+
+ mutex_lock(&test_fw_mutex);
+
+ idx = test_fw_config->read_fw_idx;
+ if (idx >= test_fw_config->num_requests) {
+ rc = -ERANGE;
+ goto out;
+ }
+
+ if (!test_fw_config->reqs) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ req = &test_fw_config->reqs[idx];
+ if (!req->fw) {
+ pr_err("#%u: failed to async load firmware\n", idx);
+ rc = -ENOENT;
+ goto out;
+ }
+
+ pr_info("#%u: loaded %zu\n", idx, req->fw->size);
+
+ if (req->fw->size > PAGE_SIZE) {
+ pr_err("Testing interface must use PAGE_SIZE firmware for now\n");
+ rc = -EINVAL;
+ }
+ memcpy(buf, req->fw->data, req->fw->size);
+
+ rc = req->fw->size;
+out:
+ mutex_unlock(&test_fw_mutex);
+
+ return rc;
+}
+static DEVICE_ATTR_RO(read_firmware);
+
#define TEST_FW_DEV_ATTR(name) &dev_attr_##name.attr
static struct attribute *test_dev_attrs[] = {
+ TEST_FW_DEV_ATTR(reset),
+
+ TEST_FW_DEV_ATTR(config),
+ TEST_FW_DEV_ATTR(config_name),
+ TEST_FW_DEV_ATTR(config_num_requests),
+ TEST_FW_DEV_ATTR(config_sync_direct),
+ TEST_FW_DEV_ATTR(config_send_uevent),
+ TEST_FW_DEV_ATTR(config_read_fw_idx),
+
+ /* These don't use the config at all - they could be ported! */
TEST_FW_DEV_ATTR(trigger_request),
TEST_FW_DEV_ATTR(trigger_async_request),
TEST_FW_DEV_ATTR(trigger_custom_fallback),
+
+ /* These use the config and can use the test_result */
+ TEST_FW_DEV_ATTR(trigger_batched_requests),
+ TEST_FW_DEV_ATTR(trigger_batched_requests_async),
+
+ TEST_FW_DEV_ATTR(release_all_firmware),
+ TEST_FW_DEV_ATTR(test_result),
+ TEST_FW_DEV_ATTR(read_firmware),
NULL,
};
{
int rc;
+ test_fw_config = kzalloc(sizeof(struct test_config), GFP_KERNEL);
+ if (!test_fw_config)
+ return -ENOMEM;
+
+ rc = __test_firmware_config_init();
+ if (rc)
+ return rc;
+
rc = misc_register(&test_fw_misc_device);
if (rc) {
+ kfree(test_fw_config);
pr_err("could not register misc device: %d\n", rc);
return rc;
}
static void __exit test_firmware_exit(void)
{
+ mutex_lock(&test_fw_mutex);
release_firmware(test_firmware);
misc_deregister(&test_fw_misc_device);
+ __test_firmware_config_free();
+ kfree(test_fw_config);
+ mutex_unlock(&test_fw_mutex);
+
pr_warn("removed interface\n");
}
fi
# CONFIG_FW_LOADER_USER_HELPER has a sysfs class under /sys/class/firmware/
-# These days no one enables CONFIG_FW_LOADER_USER_HELPER so check for that
-# as an indicator for CONFIG_FW_LOADER_USER_HELPER.
+# These days most distros enable CONFIG_FW_LOADER_USER_HELPER but disable
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK. We use /sys/class/firmware/ as an
+# indicator for CONFIG_FW_LOADER_USER_HELPER.
HAS_FW_LOADER_USER_HELPER=$(if [ -d /sys/class/firmware/ ]; then echo yes; else echo no; fi)
if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
echo "$0: async filesystem loading works"
fi
+### Batched requests tests
+test_config_present()
+{
+ if [ ! -f $DIR/reset ]; then
+ echo "Configuration triggers not present, ignoring test"
+ exit 0
+ fi
+}
+
+# Defaults :
+#
+# send_uevent: 1
+# sync_direct: 0
+# name: test-firmware.bin
+# num_requests: 4
+config_reset()
+{
+ echo 1 > $DIR/reset
+}
+
+release_all_firmware()
+{
+ echo 1 > $DIR/release_all_firmware
+}
+
+config_set_name()
+{
+ echo -n $1 > $DIR/config_name
+}
+
+config_set_sync_direct()
+{
+ echo 1 > $DIR/config_sync_direct
+}
+
+config_unset_sync_direct()
+{
+ echo 0 > $DIR/config_sync_direct
+}
+
+config_set_uevent()
+{
+ echo 1 > $DIR/config_send_uevent
+}
+
+config_unset_uevent()
+{
+ echo 0 > $DIR/config_send_uevent
+}
+
+config_trigger_sync()
+{
+ echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null
+}
+
+config_trigger_async()
+{
+ echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null
+}
+
+config_set_read_fw_idx()
+{
+ echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null
+}
+
+read_firmwares()
+{
+ for i in $(seq 0 3); do
+ config_set_read_fw_idx $i
+ # Verify the contents are what we expect.
+ # -Z required for now -- check for yourself, md5sum
+ # on $FW and DIR/read_firmware will yield the same. Even
+ # cmp agrees, so something is off.
+ if ! diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
+ echo "request #$i: firmware was not loaded" >&2
+ exit 1
+ fi
+ done
+}
+
+read_firmwares_expect_nofile()
+{
+ for i in $(seq 0 3); do
+ config_set_read_fw_idx $i
+ # Ensures contents differ
+ if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
+ echo "request $i: file was not expected to match" >&2
+ exit 1
+ fi
+ done
+}
+
+test_batched_request_firmware_nofile()
+{
+ echo -n "Batched request_firmware() nofile try #$1: "
+ config_reset
+ config_set_name nope-test-firmware.bin
+ config_trigger_sync
+ read_firmwares_expect_nofile
+ release_all_firmware
+ echo "OK"
+}
+
+test_batched_request_firmware_direct_nofile()
+{
+ echo -n "Batched request_firmware_direct() nofile try #$1: "
+ config_reset
+ config_set_name nope-test-firmware.bin
+ config_set_sync_direct
+ config_trigger_sync
+ release_all_firmware
+ echo "OK"
+}
+
+test_request_firmware_nowait_uevent_nofile()
+{
+ echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: "
+ config_reset
+ config_set_name nope-test-firmware.bin
+ config_trigger_async
+ release_all_firmware
+ echo "OK"
+}
+
+test_wait_and_cancel_custom_load()
+{
+ if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then
+ return
+ fi
+ local timeout=10
+ name=$1
+ while [ ! -e "$DIR"/"$name"/loading ]; do
+ sleep 0.1
+ timeout=$(( $timeout - 1 ))
+ if [ "$timeout" -eq 0 ]; then
+ echo "firmware interface never appeared:" >&2
+ echo "$DIR/$name/loading" >&2
+ exit 1
+ fi
+ done
+ echo -1 >"$DIR"/"$name"/loading
+}
+
+test_request_firmware_nowait_custom_nofile()
+{
+ echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: "
+ config_unset_uevent
+ config_set_name nope-test-firmware.bin
+ config_trigger_async &
+ test_wait_and_cancel_custom_load nope-test-firmware.bin
+ wait
+ release_all_firmware
+ echo "OK"
+}
+
+test_batched_request_firmware()
+{
+ echo -n "Batched request_firmware() try #$1: "
+ config_reset
+ config_trigger_sync
+ read_firmwares
+ release_all_firmware
+ echo "OK"
+}
+
+test_batched_request_firmware_direct()
+{
+ echo -n "Batched request_firmware_direct() try #$1: "
+ config_reset
+ config_set_sync_direct
+ config_trigger_sync
+ release_all_firmware
+ echo "OK"
+}
+
+test_request_firmware_nowait_uevent()
+{
+ echo -n "Batched request_firmware_nowait(uevent=true) try #$1: "
+ config_reset
+ config_trigger_async
+ release_all_firmware
+ echo "OK"
+}
+
+test_request_firmware_nowait_custom()
+{
+ echo -n "Batched request_firmware_nowait(uevent=false) try #$1: "
+ config_unset_uevent
+ config_trigger_async
+ release_all_firmware
+ echo "OK"
+}
+
+# Only continue if batched request triggers are present on the
+# test-firmware driver
+test_config_present
+
+# test with the file present
+echo
+echo "Testing with the file present..."
+for i in $(seq 1 5); do
+ test_batched_request_firmware $i
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_direct $i
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_uevent $i
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_custom $i
+done
+
+# Test for file not found, errors are expected, the failure would be
+# a hung task, which would require a hard reset.
+echo
+echo "Testing with the file missing..."
+for i in $(seq 1 5); do
+ test_batched_request_firmware_nofile $i
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_direct_nofile $i
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_uevent_nofile $i
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_custom_nofile $i
+done
+
exit 0
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff