.read = mei_me_read_slots
};
+static bool mei_me_fw_type_nm(struct pci_dev *pdev)
+{
+ u32 reg;
+ pci_read_config_dword(pdev, PCI_CFG_HFS_2, ®);
+ /* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
+ return (reg & 0x600) == 0x200;
+}
+
+#define MEI_CFG_FW_NM \
+ .quirk_probe = mei_me_fw_type_nm
+
+static bool mei_me_fw_type_sps(struct pci_dev *pdev)
+{
+ u32 reg;
+ /* Read ME FW Status check for SPS Firmware */
+ pci_read_config_dword(pdev, PCI_CFG_HFS_1, ®);
+ /* if bits [19:16] = 15, running SPS Firmware */
+ return (reg & 0xf0000) == 0xf0000;
+}
+
+#define MEI_CFG_FW_SPS \
+ .quirk_probe = mei_me_fw_type_sps
+
+
#define MEI_CFG_LEGACY_HFS \
.fw_status.count = 0
MEI_CFG_PCH_HFS,
};
+
+/* PCH Cougar Point and Patsburg with quirk for Node Manager exclusion */
+const struct mei_cfg mei_me_pch_cpt_pbg_cfg = {
+ MEI_CFG_PCH_HFS,
+ MEI_CFG_FW_NM,
+};
+
+/* PCH Lynx Point with quirk for SPS Firmware exclusion */
+const struct mei_cfg mei_me_lpt_cfg = {
+ MEI_CFG_PCH_HFS,
+ MEI_CFG_FW_SPS,
+};
+
/**
* mei_me_dev_init - allocates and initializes the mei device structure
*
{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_1, mei_me_pch_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_2, mei_me_pch_cfg)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_CPT_1, mei_me_pch_cfg)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_PBG_1, mei_me_pch_cfg)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CPT_1, mei_me_pch_cpt_pbg_cfg)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_PBG_1, mei_me_pch_cpt_pbg_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_1, mei_me_pch_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_2, mei_me_pch_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_3, mei_me_pch_cfg)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_H, mei_me_pch_cfg)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_W, mei_me_pch_cfg)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_H, mei_me_lpt_cfg)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_W, mei_me_lpt_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_LPT_LP, mei_me_pch_cfg)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_HR, mei_me_pch_cfg)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_HR, mei_me_lpt_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP, mei_me_pch_cfg)},
/* required last entry */
* mei_quirk_probe - probe for devices that doesn't valid ME interface
*
* @pdev: PCI device structure
- * @ent: entry into pci_device_table
+ * @cfg: per generation config
*
* returns true if ME Interface is valid, false otherwise
*/
static bool mei_me_quirk_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+ const struct mei_cfg *cfg)
{
- u32 reg;
- /* Cougar Point || Patsburg */
- if (ent->device == MEI_DEV_ID_CPT_1 ||
- ent->device == MEI_DEV_ID_PBG_1) {
- pci_read_config_dword(pdev, PCI_CFG_HFS_2, ®);
- /* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
- if ((reg & 0x600) == 0x200)
- goto no_mei;
- }
-
- /* Lynx Point */
- if (ent->device == MEI_DEV_ID_LPT_H ||
- ent->device == MEI_DEV_ID_LPT_W ||
- ent->device == MEI_DEV_ID_LPT_HR) {
- /* Read ME FW Status check for SPS Firmware */
- pci_read_config_dword(pdev, PCI_CFG_HFS_1, ®);
- /* if bits [19:16] = 15, running SPS Firmware */
- if ((reg & 0xf0000) == 0xf0000)
- goto no_mei;
+ if (cfg->quirk_probe && cfg->quirk_probe(pdev)) {
+ dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n");
+ return false;
}
return true;
-
-no_mei:
- dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n");
- return false;
}
+
/**
* mei_probe - Device Initialization Routine
*
int err;
- if (!mei_me_quirk_probe(pdev, ent)) {
- err = -ENODEV;
- goto end;
- }
+ if (!mei_me_quirk_probe(pdev, cfg))
+ return -ENODEV;
/* enable pci dev */
err = pci_enable_device(pdev);