+++ /dev/null
-/*
- * m32r_sio.c
- *
- * Driver for M32R serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/8250.c.
- *
- * Copyright (C) 2001 Russell King.
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/*
- * A note about mapbase / membase
- *
- * mapbase is the physical address of the IO port. Currently, we don't
- * support this very well, and it may well be dropped from this driver
- * in future. As such, mapbase should be NULL.
- *
- * membase is an 'ioremapped' cookie. This is compatible with the old
- * serial.c driver, and is currently the preferred form.
- */
-
-#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/delay.h>
-
-#include <asm/m32r.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define PORT_M32R_BASE PORT_M32R_SIO
-#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1)
-#define BAUD_RATE 115200
-
-#include <linux/serial_core.h>
-#include "m32r_sio.h"
-#include "m32r_sio_reg.h"
-
-/*
- * Debugging.
- */
-#if 0
-#define DEBUG_AUTOCONF(fmt...) printk(fmt)
-#else
-#define DEBUG_AUTOCONF(fmt...) do { } while (0)
-#endif
-
-#if 0
-#define DEBUG_INTR(fmt...) printk(fmt)
-#else
-#define DEBUG_INTR(fmt...) do { } while (0)
-#endif
-
-#define PASS_LIMIT 256
-
-/*
- * We default to IRQ0 for the "no irq" hack. Some
- * machine types want others as well - they're free
- * to redefine this in their header file.
- */
-#define is_real_interrupt(irq) ((irq) != 0)
-
-#define BASE_BAUD 115200
-
-/* Standard COM flags */
-#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
-
-/*
- * SERIAL_PORT_DFNS tells us about built-in ports that have no
- * standard enumeration mechanism. Platforms that can find all
- * serial ports via mechanisms like ACPI or PCI need not supply it.
- */
-#if defined(CONFIG_PLAT_USRV)
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
-
-#else /* !CONFIG_PLAT_USRV */
-
-#if defined(CONFIG_SERIAL_M32R_PLDSIO)
-#define SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \
- STD_COM_FLAGS }, /* ttyS0 */
-#else
-#define SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \
- STD_COM_FLAGS }, /* ttyS0 */
-#endif
-
-#endif /* !CONFIG_PLAT_USRV */
-
-static struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS
-};
-
-#define UART_NR ARRAY_SIZE(old_serial_port)
-
-struct uart_sio_port {
- struct uart_port port;
- struct timer_list timer; /* "no irq" timer */
- struct list_head list; /* ports on this IRQ */
- unsigned short rev;
- unsigned char acr;
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr_mask; /* mask of user bits */
- unsigned char mcr_force; /* mask of forced bits */
- unsigned char lsr_break_flag;
-
- /*
- * We provide a per-port pm hook.
- */
- void (*pm)(struct uart_port *port,
- unsigned int state, unsigned int old);
-};
-
-struct irq_info {
- spinlock_t lock;
- struct list_head *head;
-};
-
-static struct irq_info irq_lists[NR_IRQS];
-
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial_uart_config uart_config[] = {
- [PORT_UNKNOWN] = {
- .name = "unknown",
- .dfl_xmit_fifo_size = 1,
- .flags = 0,
- },
- [PORT_INDEX(PORT_M32R_SIO)] = {
- .name = "M32RSIO",
- .dfl_xmit_fifo_size = 1,
- .flags = 0,
- },
-};
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-
-#define __sio_in(x) inw((unsigned long)(x))
-#define __sio_out(v,x) outw((v),(unsigned long)(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
- unsigned short sbaud;
- sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1;
- __sio_out(sbaud, PLD_ESIO0BAUR);
-}
-
-static void sio_reset(void)
-{
- unsigned short tmp;
-
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0CR);
- sio_set_baud_rate(BAUD_RATE);
- __sio_out(0x0300, PLD_ESIO0CR);
- __sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_init(void)
-{
- unsigned short tmp;
-
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0CR);
- __sio_out(0x0300, PLD_ESIO0CR);
- __sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_error(int *status)
-{
- printk("SIO0 error[%04x]\n", *status);
- do {
- sio_init();
- } while ((*status = __sio_in(PLD_ESIO0CR)) != 3);
-}
-
-#else /* not CONFIG_SERIAL_M32R_PLDSIO */
-
-#define __sio_in(x) inl(x)
-#define __sio_out(v,x) outl((v),(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
- unsigned long i, j;
-
- i = boot_cpu_data.bus_clock / (baud * 16);
- j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud;
- i -= 1;
- j = (j + 1) >> 1;
-
- __sio_out(i, M32R_SIO0_BAUR_PORTL);
- __sio_out(j, M32R_SIO0_RBAUR_PORTL);
-}
-
-static void sio_reset(void)
-{
- __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */
- __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */
- __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */
- sio_set_baud_rate(BAUD_RATE);
- __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL);
- __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */
-}
-
-static void sio_init(void)
-{
- unsigned int tmp;
-
- tmp = __sio_in(M32R_SIO0_RXB_PORTL);
- tmp = __sio_in(M32R_SIO0_RXB_PORTL);
- tmp = __sio_in(M32R_SIO0_STS_PORTL);
- __sio_out(0x00000003, M32R_SIO0_CR_PORTL);
-}
-
-static void sio_error(int *status)
-{
- printk("SIO0 error[%04x]\n", *status);
- do {
- sio_init();
- } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3);
-}
-
-#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-
-static unsigned int sio_in(struct uart_sio_port *up, int offset)
-{
- return __sio_in(up->port.iobase + offset);
-}
-
-static void sio_out(struct uart_sio_port *up, int offset, int value)
-{
- __sio_out(value, up->port.iobase + offset);
-}
-
-static unsigned int serial_in(struct uart_sio_port *up, int offset)
-{
- if (!offset)
- return 0;
-
- return __sio_in(offset);
-}
-
-static void serial_out(struct uart_sio_port *up, int offset, int value)
-{
- if (!offset)
- return;
-
- __sio_out(value, offset);
-}
-
-static void m32r_sio_stop_tx(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- if (up->ier & UART_IER_THRI) {
- up->ier &= ~UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- }
-}
-
-static void m32r_sio_start_tx(struct uart_port *port)
-{
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- struct circ_buf *xmit = &up->port.state->xmit;
-
- if (!(up->ier & UART_IER_THRI)) {
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- }
- while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
-#else
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- if (!(up->ier & UART_IER_THRI)) {
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- }
-#endif
-}
-
-static void m32r_sio_stop_rx(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- up->ier &= ~UART_IER_RLSI;
- up->port.read_status_mask &= ~UART_LSR_DR;
- serial_out(up, UART_IER, up->ier);
-}
-
-static void m32r_sio_enable_ms(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- up->ier |= UART_IER_MSI;
- serial_out(up, UART_IER, up->ier);
-}
-
-static void receive_chars(struct uart_sio_port *up, int *status)
-{
- struct tty_struct *tty = up->port.state->port.tty;
- unsigned char ch;
- unsigned char flag;
- int max_count = 256;
-
- do {
- ch = sio_in(up, SIORXB);
- flag = TTY_NORMAL;
- up->port.icount.rx++;
-
- if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
- UART_LSR_FE | UART_LSR_OE))) {
- /*
- * For statistics only
- */
- if (*status & UART_LSR_BI) {
- *status &= ~(UART_LSR_FE | UART_LSR_PE);
- up->port.icount.brk++;
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(&up->port))
- goto ignore_char;
- } else if (*status & UART_LSR_PE)
- up->port.icount.parity++;
- else if (*status & UART_LSR_FE)
- up->port.icount.frame++;
- if (*status & UART_LSR_OE)
- up->port.icount.overrun++;
-
- /*
- * Mask off conditions which should be ingored.
- */
- *status &= up->port.read_status_mask;
-
- if (up->port.line == up->port.cons->index) {
- /* Recover the break flag from console xmit */
- *status |= up->lsr_break_flag;
- up->lsr_break_flag = 0;
- }
-
- if (*status & UART_LSR_BI) {
- DEBUG_INTR("handling break....");
- flag = TTY_BREAK;
- } else if (*status & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (*status & UART_LSR_FE)
- flag = TTY_FRAME;
- }
- if (uart_handle_sysrq_char(&up->port, ch))
- goto ignore_char;
- if ((*status & up->port.ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
-
- if (*status & UART_LSR_OE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
- ignore_char:
- *status = serial_in(up, UART_LSR);
- } while ((*status & UART_LSR_DR) && (max_count-- > 0));
- tty_flip_buffer_push(tty);
-}
-
-static void transmit_chars(struct uart_sio_port *up)
-{
- struct circ_buf *xmit = &up->port.state->xmit;
- int count;
-
- if (up->port.x_char) {
-#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */
- serial_out(up, UART_TX, up->port.x_char);
-#endif
- up->port.icount.tx++;
- up->port.x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- m32r_sio_stop_tx(&up->port);
- return;
- }
-
- count = up->port.fifosize;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- while (!(serial_in(up, UART_LSR) & UART_LSR_THRE));
-
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-
- DEBUG_INTR("THRE...");
-
- if (uart_circ_empty(xmit))
- m32r_sio_stop_tx(&up->port);
-}
-
-/*
- * This handles the interrupt from one port.
- */
-static inline void m32r_sio_handle_port(struct uart_sio_port *up,
- unsigned int status)
-{
- DEBUG_INTR("status = %x...", status);
-
- if (status & 0x04)
- receive_chars(up, &status);
- if (status & 0x01)
- transmit_chars(up);
-}
-
-/*
- * This is the serial driver's interrupt routine.
- *
- * Arjan thinks the old way was overly complex, so it got simplified.
- * Alan disagrees, saying that need the complexity to handle the weird
- * nature of ISA shared interrupts. (This is a special exception.)
- *
- * In order to handle ISA shared interrupts properly, we need to check
- * that all ports have been serviced, and therefore the ISA interrupt
- * line has been de-asserted.
- *
- * This means we need to loop through all ports. checking that they
- * don't have an interrupt pending.
- */
-static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
-{
- struct irq_info *i = dev_id;
- struct list_head *l, *end = NULL;
- int pass_counter = 0;
-
- DEBUG_INTR("m32r_sio_interrupt(%d)...", irq);
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-// if (irq == PLD_IRQ_SIO0_SND)
-// irq = PLD_IRQ_SIO0_RCV;
-#else
- if (irq == M32R_IRQ_SIO0_S)
- irq = M32R_IRQ_SIO0_R;
-#endif
-
- spin_lock(&i->lock);
-
- l = i->head;
- do {
- struct uart_sio_port *up;
- unsigned int sts;
-
- up = list_entry(l, struct uart_sio_port, list);
-
- sts = sio_in(up, SIOSTS);
- if (sts & 0x5) {
- spin_lock(&up->port.lock);
- m32r_sio_handle_port(up, sts);
- spin_unlock(&up->port.lock);
-
- end = NULL;
- } else if (end == NULL)
- end = l;
-
- l = l->next;
-
- if (l == i->head && pass_counter++ > PASS_LIMIT) {
- if (sts & 0xe0)
- sio_error(&sts);
- break;
- }
- } while (l != end);
-
- spin_unlock(&i->lock);
-
- DEBUG_INTR("end.\n");
-
- return IRQ_HANDLED;
-}
-
-/*
- * To support ISA shared interrupts, we need to have one interrupt
- * handler that ensures that the IRQ line has been deasserted
- * before returning. Failing to do this will result in the IRQ
- * line being stuck active, and, since ISA irqs are edge triggered,
- * no more IRQs will be seen.
- */
-static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up)
-{
- spin_lock_irq(&i->lock);
-
- if (!list_empty(i->head)) {
- if (i->head == &up->list)
- i->head = i->head->next;
- list_del(&up->list);
- } else {
- BUG_ON(i->head != &up->list);
- i->head = NULL;
- }
-
- spin_unlock_irq(&i->lock);
-}
-
-static int serial_link_irq_chain(struct uart_sio_port *up)
-{
- struct irq_info *i = irq_lists + up->port.irq;
- int ret, irq_flags = 0;
-
- spin_lock_irq(&i->lock);
-
- if (i->head) {
- list_add(&up->list, i->head);
- spin_unlock_irq(&i->lock);
-
- ret = 0;
- } else {
- INIT_LIST_HEAD(&up->list);
- i->head = &up->list;
- spin_unlock_irq(&i->lock);
-
- ret = request_irq(up->port.irq, m32r_sio_interrupt,
- irq_flags, "SIO0-RX", i);
- ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt,
- irq_flags, "SIO0-TX", i);
- if (ret < 0)
- serial_do_unlink(i, up);
- }
-
- return ret;
-}
-
-static void serial_unlink_irq_chain(struct uart_sio_port *up)
-{
- struct irq_info *i = irq_lists + up->port.irq;
-
- BUG_ON(i->head == NULL);
-
- if (list_empty(i->head)) {
- free_irq(up->port.irq, i);
- free_irq(up->port.irq + 1, i);
- }
-
- serial_do_unlink(i, up);
-}
-
-/*
- * This function is used to handle ports that do not have an interrupt.
- */
-static void m32r_sio_timeout(unsigned long data)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)data;
- unsigned int timeout;
- unsigned int sts;
-
- sts = sio_in(up, SIOSTS);
- if (sts & 0x5) {
- spin_lock(&up->port.lock);
- m32r_sio_handle_port(up, sts);
- spin_unlock(&up->port.lock);
- }
-
- timeout = up->port.timeout;
- timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
- mod_timer(&up->timer, jiffies + timeout);
-}
-
-static unsigned int m32r_sio_tx_empty(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- unsigned long flags;
- unsigned int ret;
-
- spin_lock_irqsave(&up->port.lock, flags);
- ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- return ret;
-}
-
-static unsigned int m32r_sio_get_mctrl(struct uart_port *port)
-{
- return 0;
-}
-
-static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-
-}
-
-static void m32r_sio_break_ctl(struct uart_port *port, int break_state)
-{
-
-}
-
-static int m32r_sio_startup(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- int retval;
-
- sio_init();
-
- /*
- * If the "interrupt" for this port doesn't correspond with any
- * hardware interrupt, we use a timer-based system. The original
- * driver used to do this with IRQ0.
- */
- if (!is_real_interrupt(up->port.irq)) {
- unsigned int timeout = up->port.timeout;
-
- timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
-
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies + timeout);
- } else {
- retval = serial_link_irq_chain(up);
- if (retval)
- return retval;
- }
-
- /*
- * Finally, enable interrupts. Note: Modem status interrupts
- * are set via set_termios(), which will be occurring imminently
- * anyway, so we don't enable them here.
- * - M32R_SIO: 0x0c
- * - M32R_PLDSIO: 0x04
- */
- up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
- sio_out(up, SIOTRCR, up->ier);
-
- /*
- * And clear the interrupt registers again for luck.
- */
- sio_reset();
-
- return 0;
-}
-
-static void m32r_sio_shutdown(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- /*
- * Disable interrupts from this port
- */
- up->ier = 0;
- sio_out(up, SIOTRCR, 0);
-
- /*
- * Disable break condition and FIFOs
- */
-
- sio_init();
-
- if (!is_real_interrupt(up->port.irq))
- del_timer_sync(&up->timer);
- else
- serial_unlink_irq_chain(up);
-}
-
-static unsigned int m32r_sio_get_divisor(struct uart_port *port,
- unsigned int baud)
-{
- return uart_get_divisor(port, baud);
-}
-
-static void m32r_sio_set_termios(struct uart_port *port,
- struct ktermios *termios, struct ktermios *old)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- unsigned char cval = 0;
- unsigned long flags;
- unsigned int baud, quot;
-
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
-
- if (termios->c_cflag & CSTOPB)
- cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB)
- cval |= UART_LCR_PARITY;
- if (!(termios->c_cflag & PARODD))
- cval |= UART_LCR_EPAR;
-#ifdef CMSPAR
- if (termios->c_cflag & CMSPAR)
- cval |= UART_LCR_SPAR;
-#endif
-
- /*
- * Ask the core to calculate the divisor for us.
- */
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
-#else
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-#endif
- quot = m32r_sio_get_divisor(port, baud);
-
- /*
- * Ok, we're now changing the port state. Do it with
- * interrupts disabled.
- */
- spin_lock_irqsave(&up->port.lock, flags);
-
- sio_set_baud_rate(baud);
-
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (termios->c_iflag & INPCK)
- up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
- up->port.read_status_mask |= UART_LSR_BI;
-
- /*
- * Characteres to ignore
- */
- up->port.ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
- if (termios->c_iflag & IGNBRK) {
- up->port.ignore_status_mask |= UART_LSR_BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_OE;
- }
-
- /*
- * ignore all characters if CREAD is not set
- */
- if ((termios->c_cflag & CREAD) == 0)
- up->port.ignore_status_mask |= UART_LSR_DR;
-
- /*
- * CTS flow control flag and modem status interrupts
- */
- up->ier &= ~UART_IER_MSI;
- if (UART_ENABLE_MS(&up->port, termios->c_cflag))
- up->ier |= UART_IER_MSI;
-
- serial_out(up, UART_IER, up->ier);
-
- up->lcr = cval; /* Save LCR */
- spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static void m32r_sio_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- if (up->pm)
- up->pm(port, state, oldstate);
-}
-
-/*
- * Resource handling. This is complicated by the fact that resources
- * depend on the port type. Maybe we should be claiming the standard
- * 8250 ports, and then trying to get other resources as necessary?
- */
-static int
-m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res)
-{
- unsigned int size = 8 << up->port.regshift;
-#ifndef CONFIG_SERIAL_M32R_PLDSIO
- unsigned long start;
-#endif
- int ret = 0;
-
- switch (up->port.iotype) {
- case UPIO_MEM:
- if (up->port.mapbase) {
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- *res = request_mem_region(up->port.mapbase, size, "serial");
-#else
- start = up->port.mapbase;
- *res = request_mem_region(start, size, "serial");
-#endif
- if (!*res)
- ret = -EBUSY;
- }
- break;
-
- case UPIO_PORT:
- *res = request_region(up->port.iobase, size, "serial");
- if (!*res)
- ret = -EBUSY;
- break;
- }
- return ret;
-}
-
-static void m32r_sio_release_port(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- unsigned long start, offset = 0, size = 0;
-
- size <<= up->port.regshift;
-
- switch (up->port.iotype) {
- case UPIO_MEM:
- if (up->port.mapbase) {
- /*
- * Unmap the area.
- */
- iounmap(up->port.membase);
- up->port.membase = NULL;
-
- start = up->port.mapbase;
-
- if (size)
- release_mem_region(start + offset, size);
- release_mem_region(start, 8 << up->port.regshift);
- }
- break;
-
- case UPIO_PORT:
- start = up->port.iobase;
-
- if (size)
- release_region(start + offset, size);
- release_region(start + offset, 8 << up->port.regshift);
- break;
-
- default:
- break;
- }
-}
-
-static int m32r_sio_request_port(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- struct resource *res = NULL;
- int ret = 0;
-
- ret = m32r_sio_request_std_resource(up, &res);
-
- /*
- * If we have a mapbase, then request that as well.
- */
- if (ret == 0 && up->port.flags & UPF_IOREMAP) {
- int size = resource_size(res);
-
- up->port.membase = ioremap(up->port.mapbase, size);
- if (!up->port.membase)
- ret = -ENOMEM;
- }
-
- if (ret < 0) {
- if (res)
- release_resource(res);
- }
-
- return ret;
-}
-
-static void m32r_sio_config_port(struct uart_port *port, int unused)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- unsigned long flags;
-
- spin_lock_irqsave(&up->port.lock, flags);
-
- up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
- up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
-
- spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static int
-m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- if (ser->irq >= nr_irqs || ser->irq < 0 ||
- ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
- ser->type >= ARRAY_SIZE(uart_config))
- return -EINVAL;
- return 0;
-}
-
-static const char *
-m32r_sio_type(struct uart_port *port)
-{
- int type = port->type;
-
- if (type >= ARRAY_SIZE(uart_config))
- type = 0;
- return uart_config[type].name;
-}
-
-static struct uart_ops m32r_sio_pops = {
- .tx_empty = m32r_sio_tx_empty,
- .set_mctrl = m32r_sio_set_mctrl,
- .get_mctrl = m32r_sio_get_mctrl,
- .stop_tx = m32r_sio_stop_tx,
- .start_tx = m32r_sio_start_tx,
- .stop_rx = m32r_sio_stop_rx,
- .enable_ms = m32r_sio_enable_ms,
- .break_ctl = m32r_sio_break_ctl,
- .startup = m32r_sio_startup,
- .shutdown = m32r_sio_shutdown,
- .set_termios = m32r_sio_set_termios,
- .pm = m32r_sio_pm,
- .type = m32r_sio_type,
- .release_port = m32r_sio_release_port,
- .request_port = m32r_sio_request_port,
- .config_port = m32r_sio_config_port,
- .verify_port = m32r_sio_verify_port,
-};
-
-static struct uart_sio_port m32r_sio_ports[UART_NR];
-
-static void __init m32r_sio_init_ports(void)
-{
- struct uart_sio_port *up;
- static int first = 1;
- int i;
-
- if (!first)
- return;
- first = 0;
-
- for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port);
- i++, up++) {
- up->port.iobase = old_serial_port[i].port;
- up->port.irq = irq_canonicalize(old_serial_port[i].irq);
- up->port.uartclk = old_serial_port[i].baud_base * 16;
- up->port.flags = old_serial_port[i].flags;
- up->port.membase = old_serial_port[i].iomem_base;
- up->port.iotype = old_serial_port[i].io_type;
- up->port.regshift = old_serial_port[i].iomem_reg_shift;
- up->port.ops = &m32r_sio_pops;
- }
-}
-
-static void __init m32r_sio_register_ports(struct uart_driver *drv)
-{
- int i;
-
- m32r_sio_init_ports();
-
- for (i = 0; i < UART_NR; i++) {
- struct uart_sio_port *up = &m32r_sio_ports[i];
-
- up->port.line = i;
- up->port.ops = &m32r_sio_pops;
- init_timer(&up->timer);
- up->timer.function = m32r_sio_timeout;
-
- up->mcr_mask = ~0;
- up->mcr_force = 0;
-
- uart_add_one_port(drv, &up->port);
- }
-}
-
-#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE
-
-/*
- * Wait for transmitter & holding register to empty
- */
-static inline void wait_for_xmitr(struct uart_sio_port *up)
-{
- unsigned int status, tmout = 10000;
-
- /* Wait up to 10ms for the character(s) to be sent. */
- do {
- status = sio_in(up, SIOSTS);
-
- if (--tmout == 0)
- break;
- udelay(1);
- } while ((status & UART_EMPTY) != UART_EMPTY);
-
- /* Wait up to 1s for flow control if necessary */
- if (up->port.flags & UPF_CONS_FLOW) {
- tmout = 1000000;
- while (--tmout)
- udelay(1);
- }
-}
-
-static void m32r_sio_console_putchar(struct uart_port *port, int ch)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- wait_for_xmitr(up);
- sio_out(up, SIOTXB, ch);
-}
-
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- */
-static void m32r_sio_console_write(struct console *co, const char *s,
- unsigned int count)
-{
- struct uart_sio_port *up = &m32r_sio_ports[co->index];
- unsigned int ier;
-
- /*
- * First save the UER then disable the interrupts
- */
- ier = sio_in(up, SIOTRCR);
- sio_out(up, SIOTRCR, 0);
-
- uart_console_write(&up->port, s, count, m32r_sio_console_putchar);
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the IER
- */
- wait_for_xmitr(up);
- sio_out(up, SIOTRCR, ier);
-}
-
-static int __init m32r_sio_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index >= UART_NR)
- co->index = 0;
- port = &m32r_sio_ports[co->index].port;
-
- /*
- * Temporary fix.
- */
- spin_lock_init(&port->lock);
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver m32r_sio_reg;
-static struct console m32r_sio_console = {
- .name = "ttyS",
- .write = m32r_sio_console_write,
- .device = uart_console_device,
- .setup = m32r_sio_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &m32r_sio_reg,
-};
-
-static int __init m32r_sio_console_init(void)
-{
- sio_reset();
- sio_init();
- m32r_sio_init_ports();
- register_console(&m32r_sio_console);
- return 0;
-}
-console_initcall(m32r_sio_console_init);
-
-#define M32R_SIO_CONSOLE &m32r_sio_console
-#else
-#define M32R_SIO_CONSOLE NULL
-#endif
-
-static struct uart_driver m32r_sio_reg = {
- .owner = THIS_MODULE,
- .driver_name = "sio",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = UART_NR,
- .cons = M32R_SIO_CONSOLE,
-};
-
-/**
- * m32r_sio_suspend_port - suspend one serial port
- * @line: serial line number
- *
- * Suspend one serial port.
- */
-void m32r_sio_suspend_port(int line)
-{
- uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
-/**
- * m32r_sio_resume_port - resume one serial port
- * @line: serial line number
- *
- * Resume one serial port.
- */
-void m32r_sio_resume_port(int line)
-{
- uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
-static int __init m32r_sio_init(void)
-{
- int ret, i;
-
- printk(KERN_INFO "Serial: M32R SIO driver\n");
-
- for (i = 0; i < nr_irqs; i++)
- spin_lock_init(&irq_lists[i].lock);
-
- ret = uart_register_driver(&m32r_sio_reg);
- if (ret >= 0)
- m32r_sio_register_ports(&m32r_sio_reg);
-
- return ret;
-}
-
-static void __exit m32r_sio_exit(void)
-{
- int i;
-
- for (i = 0; i < UART_NR; i++)
- uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port);
-
- uart_unregister_driver(&m32r_sio_reg);
-}
-
-module_init(m32r_sio_init);
-module_exit(m32r_sio_exit);
-
-EXPORT_SYMBOL(m32r_sio_suspend_port);
-EXPORT_SYMBOL(m32r_sio_resume_port);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic M32R SIO serial driver");
+++ /dev/null
-/*
- * m32r_sio.h
- *
- * Driver for M32R serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/8250.h.
- *
- * Copyright (C) 2001 Russell King.
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-
-struct m32r_sio_probe {
- struct module *owner;
- int (*pci_init_one)(struct pci_dev *dev);
- void (*pci_remove_one)(struct pci_dev *dev);
- void (*pnp_init)(void);
-};
-
-int m32r_sio_register_probe(struct m32r_sio_probe *probe);
-void m32r_sio_unregister_probe(struct m32r_sio_probe *probe);
-void m32r_sio_get_irq_map(unsigned int *map);
-void m32r_sio_suspend_port(int line);
-void m32r_sio_resume_port(int line);
-
-struct old_serial_port {
- unsigned int uart;
- unsigned int baud_base;
- unsigned int port;
- unsigned int irq;
- unsigned int flags;
- unsigned char io_type;
- unsigned char __iomem *iomem_base;
- unsigned short iomem_reg_shift;
-};
-
-#define _INLINE_ inline
-
-#define PROBE_RSA (1 << 0)
-#define PROBE_ANY (~0)
-
-#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
+++ /dev/null
-/*
- * m32r_sio_reg.h
- *
- * Copyright (C) 1992, 1994 by Theodore Ts'o.
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- *
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- *
- * These are the UART port assignments, expressed as offsets from the base
- * register. These assignments should hold for any serial port based on
- * a 8250, 16450, or 16550(A).
- */
-
-#ifndef _M32R_SIO_REG_H
-#define _M32R_SIO_REG_H
-
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-
-#define SIOCR 0x000
-#define SIOMOD0 0x002
-#define SIOMOD1 0x004
-#define SIOSTS 0x006
-#define SIOTRCR 0x008
-#define SIOBAUR 0x00a
-// #define SIORBAUR 0x018
-#define SIOTXB 0x00c
-#define SIORXB 0x00e
-
-#define UART_RX ((unsigned long) PLD_ESIO0RXB)
- /* In: Receive buffer (DLAB=0) */
-#define UART_TX ((unsigned long) PLD_ESIO0TXB)
- /* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
-#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
- * In: Fifo count
- * Out: Fifo custom trigger levels
- * XR16C85x only */
-
-#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER ((unsigned long) PLD_ESIO0INTCR)
- /* Out: Interrupt Enable Register */
-#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
- * XR16C85x only */
-
-#define UART_IIR 0 /* In: Interrupt ID Register */
-#define UART_FCR 0 /* Out: FIFO Control Register */
-#define UART_EFR 0 /* I/O: Extended Features Register */
- /* (DLAB=1, 16C660 only) */
-
-#define UART_LCR 0 /* Out: Line Control Register */
-#define UART_MCR 0 /* Out: Modem Control Register */
-#define UART_LSR ((unsigned long) PLD_ESIO0STS)
- /* In: Line Status Register */
-#define UART_MSR 0 /* In: Modem Status Register */
-#define UART_SCR 0 /* I/O: Scratch Register */
-#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
- * FCTR bit 6 selects SCR or EMSR
- * XR16c85x only */
-
-#else /* not CONFIG_SERIAL_M32R_PLDSIO */
-
-#define SIOCR 0x000
-#define SIOMOD0 0x004
-#define SIOMOD1 0x008
-#define SIOSTS 0x00c
-#define SIOTRCR 0x010
-#define SIOBAUR 0x014
-#define SIORBAUR 0x018
-#define SIOTXB 0x01c
-#define SIORXB 0x020
-
-#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */
-#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
-#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
- * In: Fifo count
- * Out: Fifo custom trigger levels
- * XR16C85x only */
-
-#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */
-#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
- * XR16C85x only */
-
-#define UART_IIR 0 /* In: Interrupt ID Register */
-#define UART_FCR 0 /* Out: FIFO Control Register */
-#define UART_EFR 0 /* I/O: Extended Features Register */
- /* (DLAB=1, 16C660 only) */
-
-#define UART_LCR 0 /* Out: Line Control Register */
-#define UART_MCR 0 /* Out: Modem Control Register */
-#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */
-#define UART_MSR 0 /* In: Modem Status Register */
-#define UART_SCR 0 /* I/O: Scratch Register */
-#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
- * FCTR bit 6 selects SCR or EMSR
- * XR16c85x only */
-
-#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-
-#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-/*
- * These are the definitions for the Line Control Register
- *
- * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
- * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
- */
-#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-#define UART_LCR_SBC 0x40 /* Set break control */
-#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
-#define UART_LCR_EPAR 0x10 /* Even parity select */
-#define UART_LCR_PARITY 0x08 /* Parity Enable */
-#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
-#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
-#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
-#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-
-/*
- * These are the definitions for the Line Status Register
- */
-#define UART_LSR_TEMT 0x02 /* Transmitter empty */
-#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */
-#define UART_LSR_BI 0x00 /* Break interrupt indicator */
-#define UART_LSR_FE 0x80 /* Frame error indicator */
-#define UART_LSR_PE 0x40 /* Parity error indicator */
-#define UART_LSR_OE 0x20 /* Overrun error indicator */
-#define UART_LSR_DR 0x04 /* Receiver data ready */
-
-/*
- * These are the definitions for the Interrupt Identification Register
- */
-#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
-
-#define UART_IIR_MSI 0x00 /* Modem status interrupt */
-#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
-#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
-#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
-
-/*
- * These are the definitions for the Interrupt Enable Register
- */
-#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */
-#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */
-#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */
-#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */
-
-#endif /* _M32R_SIO_REG_H */
--- /dev/null
+/*
+ * m32r_sio.c
+ *
+ * Driver for M32R serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/serial/8250.c.
+ *
+ * Copyright (C) 2001 Russell King.
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/*
+ * A note about mapbase / membase
+ *
+ * mapbase is the physical address of the IO port. Currently, we don't
+ * support this very well, and it may well be dropped from this driver
+ * in future. As such, mapbase should be NULL.
+ *
+ * membase is an 'ioremapped' cookie. This is compatible with the old
+ * serial.c driver, and is currently the preferred form.
+ */
+
+#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/delay.h>
+
+#include <asm/m32r.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define PORT_M32R_BASE PORT_M32R_SIO
+#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1)
+#define BAUD_RATE 115200
+
+#include <linux/serial_core.h>
+#include "m32r_sio.h"
+#include "m32r_sio_reg.h"
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#define PASS_LIMIT 256
+
+/*
+ * We default to IRQ0 for the "no irq" hack. Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq) ((irq) != 0)
+
+#define BASE_BAUD 115200
+
+/* Standard COM flags */
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+
+/*
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism. Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
+ */
+#if defined(CONFIG_PLAT_USRV)
+
+#define SERIAL_PORT_DFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
+
+#else /* !CONFIG_PLAT_USRV */
+
+#if defined(CONFIG_SERIAL_M32R_PLDSIO)
+#define SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \
+ STD_COM_FLAGS }, /* ttyS0 */
+#else
+#define SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \
+ STD_COM_FLAGS }, /* ttyS0 */
+#endif
+
+#endif /* !CONFIG_PLAT_USRV */
+
+static struct old_serial_port old_serial_port[] = {
+ SERIAL_PORT_DFNS
+};
+
+#define UART_NR ARRAY_SIZE(old_serial_port)
+
+struct uart_sio_port {
+ struct uart_port port;
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned short rev;
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char lsr_break_flag;
+
+ /*
+ * We provide a per-port pm hook.
+ */
+ void (*pm)(struct uart_port *port,
+ unsigned int state, unsigned int old);
+};
+
+struct irq_info {
+ spinlock_t lock;
+ struct list_head *head;
+};
+
+static struct irq_info irq_lists[NR_IRQS];
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial_uart_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .dfl_xmit_fifo_size = 1,
+ .flags = 0,
+ },
+ [PORT_INDEX(PORT_M32R_SIO)] = {
+ .name = "M32RSIO",
+ .dfl_xmit_fifo_size = 1,
+ .flags = 0,
+ },
+};
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+
+#define __sio_in(x) inw((unsigned long)(x))
+#define __sio_out(v,x) outw((v),(unsigned long)(x))
+
+static inline void sio_set_baud_rate(unsigned long baud)
+{
+ unsigned short sbaud;
+ sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1;
+ __sio_out(sbaud, PLD_ESIO0BAUR);
+}
+
+static void sio_reset(void)
+{
+ unsigned short tmp;
+
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0CR);
+ sio_set_baud_rate(BAUD_RATE);
+ __sio_out(0x0300, PLD_ESIO0CR);
+ __sio_out(0x0003, PLD_ESIO0CR);
+}
+
+static void sio_init(void)
+{
+ unsigned short tmp;
+
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0CR);
+ __sio_out(0x0300, PLD_ESIO0CR);
+ __sio_out(0x0003, PLD_ESIO0CR);
+}
+
+static void sio_error(int *status)
+{
+ printk("SIO0 error[%04x]\n", *status);
+ do {
+ sio_init();
+ } while ((*status = __sio_in(PLD_ESIO0CR)) != 3);
+}
+
+#else /* not CONFIG_SERIAL_M32R_PLDSIO */
+
+#define __sio_in(x) inl(x)
+#define __sio_out(v,x) outl((v),(x))
+
+static inline void sio_set_baud_rate(unsigned long baud)
+{
+ unsigned long i, j;
+
+ i = boot_cpu_data.bus_clock / (baud * 16);
+ j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud;
+ i -= 1;
+ j = (j + 1) >> 1;
+
+ __sio_out(i, M32R_SIO0_BAUR_PORTL);
+ __sio_out(j, M32R_SIO0_RBAUR_PORTL);
+}
+
+static void sio_reset(void)
+{
+ __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */
+ __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */
+ __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */
+ sio_set_baud_rate(BAUD_RATE);
+ __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL);
+ __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */
+}
+
+static void sio_init(void)
+{
+ unsigned int tmp;
+
+ tmp = __sio_in(M32R_SIO0_RXB_PORTL);
+ tmp = __sio_in(M32R_SIO0_RXB_PORTL);
+ tmp = __sio_in(M32R_SIO0_STS_PORTL);
+ __sio_out(0x00000003, M32R_SIO0_CR_PORTL);
+}
+
+static void sio_error(int *status)
+{
+ printk("SIO0 error[%04x]\n", *status);
+ do {
+ sio_init();
+ } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3);
+}
+
+#endif /* CONFIG_SERIAL_M32R_PLDSIO */
+
+static unsigned int sio_in(struct uart_sio_port *up, int offset)
+{
+ return __sio_in(up->port.iobase + offset);
+}
+
+static void sio_out(struct uart_sio_port *up, int offset, int value)
+{
+ __sio_out(value, up->port.iobase + offset);
+}
+
+static unsigned int serial_in(struct uart_sio_port *up, int offset)
+{
+ if (!offset)
+ return 0;
+
+ return __sio_in(offset);
+}
+
+static void serial_out(struct uart_sio_port *up, int offset, int value)
+{
+ if (!offset)
+ return;
+
+ __sio_out(value, offset);
+}
+
+static void m32r_sio_stop_tx(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void m32r_sio_start_tx(struct uart_port *port)
+{
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ struct circ_buf *xmit = &up->port.state->xmit;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ }
+ while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
+#else
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+#endif
+}
+
+static void m32r_sio_stop_rx(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void m32r_sio_enable_ms(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void receive_chars(struct uart_sio_port *up, int *status)
+{
+ struct tty_struct *tty = up->port.state->port.tty;
+ unsigned char ch;
+ unsigned char flag;
+ int max_count = 256;
+
+ do {
+ ch = sio_in(up, SIORXB);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ *status &= up->port.read_status_mask;
+
+ if (up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+
+ if (*status & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ flag = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch))
+ goto ignore_char;
+ if ((*status & up->port.ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ if (*status & UART_LSR_OE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ ignore_char:
+ *status = serial_in(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
+ tty_flip_buffer_push(tty);
+}
+
+static void transmit_chars(struct uart_sio_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count;
+
+ if (up->port.x_char) {
+#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */
+ serial_out(up, UART_TX, up->port.x_char);
+#endif
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ m32r_sio_stop_tx(&up->port);
+ return;
+ }
+
+ count = up->port.fifosize;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ while (!(serial_in(up, UART_LSR) & UART_LSR_THRE));
+
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ DEBUG_INTR("THRE...");
+
+ if (uart_circ_empty(xmit))
+ m32r_sio_stop_tx(&up->port);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline void m32r_sio_handle_port(struct uart_sio_port *up,
+ unsigned int status)
+{
+ DEBUG_INTR("status = %x...", status);
+
+ if (status & 0x04)
+ receive_chars(up, &status);
+ if (status & 0x01)
+ transmit_chars(up);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ *
+ * Arjan thinks the old way was overly complex, so it got simplified.
+ * Alan disagrees, saying that need the complexity to handle the weird
+ * nature of ISA shared interrupts. (This is a special exception.)
+ *
+ * In order to handle ISA shared interrupts properly, we need to check
+ * that all ports have been serviced, and therefore the ISA interrupt
+ * line has been de-asserted.
+ *
+ * This means we need to loop through all ports. checking that they
+ * don't have an interrupt pending.
+ */
+static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
+{
+ struct irq_info *i = dev_id;
+ struct list_head *l, *end = NULL;
+ int pass_counter = 0;
+
+ DEBUG_INTR("m32r_sio_interrupt(%d)...", irq);
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+// if (irq == PLD_IRQ_SIO0_SND)
+// irq = PLD_IRQ_SIO0_RCV;
+#else
+ if (irq == M32R_IRQ_SIO0_S)
+ irq = M32R_IRQ_SIO0_R;
+#endif
+
+ spin_lock(&i->lock);
+
+ l = i->head;
+ do {
+ struct uart_sio_port *up;
+ unsigned int sts;
+
+ up = list_entry(l, struct uart_sio_port, list);
+
+ sts = sio_in(up, SIOSTS);
+ if (sts & 0x5) {
+ spin_lock(&up->port.lock);
+ m32r_sio_handle_port(up, sts);
+ spin_unlock(&up->port.lock);
+
+ end = NULL;
+ } else if (end == NULL)
+ end = l;
+
+ l = l->next;
+
+ if (l == i->head && pass_counter++ > PASS_LIMIT) {
+ if (sts & 0xe0)
+ sio_error(&sts);
+ break;
+ }
+ } while (l != end);
+
+ spin_unlock(&i->lock);
+
+ DEBUG_INTR("end.\n");
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * To support ISA shared interrupts, we need to have one interrupt
+ * handler that ensures that the IRQ line has been deasserted
+ * before returning. Failing to do this will result in the IRQ
+ * line being stuck active, and, since ISA irqs are edge triggered,
+ * no more IRQs will be seen.
+ */
+static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up)
+{
+ spin_lock_irq(&i->lock);
+
+ if (!list_empty(i->head)) {
+ if (i->head == &up->list)
+ i->head = i->head->next;
+ list_del(&up->list);
+ } else {
+ BUG_ON(i->head != &up->list);
+ i->head = NULL;
+ }
+
+ spin_unlock_irq(&i->lock);
+}
+
+static int serial_link_irq_chain(struct uart_sio_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+ int ret, irq_flags = 0;
+
+ spin_lock_irq(&i->lock);
+
+ if (i->head) {
+ list_add(&up->list, i->head);
+ spin_unlock_irq(&i->lock);
+
+ ret = 0;
+ } else {
+ INIT_LIST_HEAD(&up->list);
+ i->head = &up->list;
+ spin_unlock_irq(&i->lock);
+
+ ret = request_irq(up->port.irq, m32r_sio_interrupt,
+ irq_flags, "SIO0-RX", i);
+ ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt,
+ irq_flags, "SIO0-TX", i);
+ if (ret < 0)
+ serial_do_unlink(i, up);
+ }
+
+ return ret;
+}
+
+static void serial_unlink_irq_chain(struct uart_sio_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+
+ BUG_ON(i->head == NULL);
+
+ if (list_empty(i->head)) {
+ free_irq(up->port.irq, i);
+ free_irq(up->port.irq + 1, i);
+ }
+
+ serial_do_unlink(i, up);
+}
+
+/*
+ * This function is used to handle ports that do not have an interrupt.
+ */
+static void m32r_sio_timeout(unsigned long data)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)data;
+ unsigned int timeout;
+ unsigned int sts;
+
+ sts = sio_in(up, SIOSTS);
+ if (sts & 0x5) {
+ spin_lock(&up->port.lock);
+ m32r_sio_handle_port(up, sts);
+ spin_unlock(&up->port.lock);
+ }
+
+ timeout = up->port.timeout;
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+ mod_timer(&up->timer, jiffies + timeout);
+}
+
+static unsigned int m32r_sio_tx_empty(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int m32r_sio_get_mctrl(struct uart_port *port)
+{
+ return 0;
+}
+
+static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+
+}
+
+static void m32r_sio_break_ctl(struct uart_port *port, int break_state)
+{
+
+}
+
+static int m32r_sio_startup(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ int retval;
+
+ sio_init();
+
+ /*
+ * If the "interrupt" for this port doesn't correspond with any
+ * hardware interrupt, we use a timer-based system. The original
+ * driver used to do this with IRQ0.
+ */
+ if (!is_real_interrupt(up->port.irq)) {
+ unsigned int timeout = up->port.timeout;
+
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies + timeout);
+ } else {
+ retval = serial_link_irq_chain(up);
+ if (retval)
+ return retval;
+ }
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ * - M32R_SIO: 0x0c
+ * - M32R_PLDSIO: 0x04
+ */
+ up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
+ sio_out(up, SIOTRCR, up->ier);
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ sio_reset();
+
+ return 0;
+}
+
+static void m32r_sio_shutdown(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ sio_out(up, SIOTRCR, 0);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+
+ sio_init();
+
+ if (!is_real_interrupt(up->port.irq))
+ del_timer_sync(&up->timer);
+ else
+ serial_unlink_irq_chain(up);
+}
+
+static unsigned int m32r_sio_get_divisor(struct uart_port *port,
+ unsigned int baud)
+{
+ return uart_get_divisor(port, baud);
+}
+
+static void m32r_sio_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned char cval = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
+#else
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+#endif
+ quot = m32r_sio_get_divisor(port, baud);
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ sio_set_baud_rate(baud);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ up->lcr = cval; /* Save LCR */
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void m32r_sio_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ if (up->pm)
+ up->pm(port, state, oldstate);
+}
+
+/*
+ * Resource handling. This is complicated by the fact that resources
+ * depend on the port type. Maybe we should be claiming the standard
+ * 8250 ports, and then trying to get other resources as necessary?
+ */
+static int
+m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res)
+{
+ unsigned int size = 8 << up->port.regshift;
+#ifndef CONFIG_SERIAL_M32R_PLDSIO
+ unsigned long start;
+#endif
+ int ret = 0;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ if (up->port.mapbase) {
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+ *res = request_mem_region(up->port.mapbase, size, "serial");
+#else
+ start = up->port.mapbase;
+ *res = request_mem_region(start, size, "serial");
+#endif
+ if (!*res)
+ ret = -EBUSY;
+ }
+ break;
+
+ case UPIO_PORT:
+ *res = request_region(up->port.iobase, size, "serial");
+ if (!*res)
+ ret = -EBUSY;
+ break;
+ }
+ return ret;
+}
+
+static void m32r_sio_release_port(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned long start, offset = 0, size = 0;
+
+ size <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ if (up->port.mapbase) {
+ /*
+ * Unmap the area.
+ */
+ iounmap(up->port.membase);
+ up->port.membase = NULL;
+
+ start = up->port.mapbase;
+
+ if (size)
+ release_mem_region(start + offset, size);
+ release_mem_region(start, 8 << up->port.regshift);
+ }
+ break;
+
+ case UPIO_PORT:
+ start = up->port.iobase;
+
+ if (size)
+ release_region(start + offset, size);
+ release_region(start + offset, 8 << up->port.regshift);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int m32r_sio_request_port(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ struct resource *res = NULL;
+ int ret = 0;
+
+ ret = m32r_sio_request_std_resource(up, &res);
+
+ /*
+ * If we have a mapbase, then request that as well.
+ */
+ if (ret == 0 && up->port.flags & UPF_IOREMAP) {
+ int size = resource_size(res);
+
+ up->port.membase = ioremap(up->port.mapbase, size);
+ if (!up->port.membase)
+ ret = -ENOMEM;
+ }
+
+ if (ret < 0) {
+ if (res)
+ release_resource(res);
+ }
+
+ return ret;
+}
+
+static void m32r_sio_config_port(struct uart_port *port, int unused)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
+ up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int
+m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq >= nr_irqs || ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+ ser->type >= ARRAY_SIZE(uart_config))
+ return -EINVAL;
+ return 0;
+}
+
+static const char *
+m32r_sio_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct uart_ops m32r_sio_pops = {
+ .tx_empty = m32r_sio_tx_empty,
+ .set_mctrl = m32r_sio_set_mctrl,
+ .get_mctrl = m32r_sio_get_mctrl,
+ .stop_tx = m32r_sio_stop_tx,
+ .start_tx = m32r_sio_start_tx,
+ .stop_rx = m32r_sio_stop_rx,
+ .enable_ms = m32r_sio_enable_ms,
+ .break_ctl = m32r_sio_break_ctl,
+ .startup = m32r_sio_startup,
+ .shutdown = m32r_sio_shutdown,
+ .set_termios = m32r_sio_set_termios,
+ .pm = m32r_sio_pm,
+ .type = m32r_sio_type,
+ .release_port = m32r_sio_release_port,
+ .request_port = m32r_sio_request_port,
+ .config_port = m32r_sio_config_port,
+ .verify_port = m32r_sio_verify_port,
+};
+
+static struct uart_sio_port m32r_sio_ports[UART_NR];
+
+static void __init m32r_sio_init_ports(void)
+{
+ struct uart_sio_port *up;
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port);
+ i++, up++) {
+ up->port.iobase = old_serial_port[i].port;
+ up->port.irq = irq_canonicalize(old_serial_port[i].irq);
+ up->port.uartclk = old_serial_port[i].baud_base * 16;
+ up->port.flags = old_serial_port[i].flags;
+ up->port.membase = old_serial_port[i].iomem_base;
+ up->port.iotype = old_serial_port[i].io_type;
+ up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ up->port.ops = &m32r_sio_pops;
+ }
+}
+
+static void __init m32r_sio_register_ports(struct uart_driver *drv)
+{
+ int i;
+
+ m32r_sio_init_ports();
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_sio_port *up = &m32r_sio_ports[i];
+
+ up->port.line = i;
+ up->port.ops = &m32r_sio_pops;
+ init_timer(&up->timer);
+ up->timer.function = m32r_sio_timeout;
+
+ up->mcr_mask = ~0;
+ up->mcr_force = 0;
+
+ uart_add_one_port(drv, &up->port);
+ }
+}
+
+#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_sio_port *up)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = sio_in(up, SIOSTS);
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & UART_EMPTY) != UART_EMPTY);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout)
+ udelay(1);
+ }
+}
+
+static void m32r_sio_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ wait_for_xmitr(up);
+ sio_out(up, SIOTXB, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void m32r_sio_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_sio_port *up = &m32r_sio_ports[co->index];
+ unsigned int ier;
+
+ /*
+ * First save the UER then disable the interrupts
+ */
+ ier = sio_in(up, SIOTRCR);
+ sio_out(up, SIOTRCR, 0);
+
+ uart_console_write(&up->port, s, count, m32r_sio_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ sio_out(up, SIOTRCR, ier);
+}
+
+static int __init m32r_sio_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ port = &m32r_sio_ports[co->index].port;
+
+ /*
+ * Temporary fix.
+ */
+ spin_lock_init(&port->lock);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver m32r_sio_reg;
+static struct console m32r_sio_console = {
+ .name = "ttyS",
+ .write = m32r_sio_console_write,
+ .device = uart_console_device,
+ .setup = m32r_sio_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &m32r_sio_reg,
+};
+
+static int __init m32r_sio_console_init(void)
+{
+ sio_reset();
+ sio_init();
+ m32r_sio_init_ports();
+ register_console(&m32r_sio_console);
+ return 0;
+}
+console_initcall(m32r_sio_console_init);
+
+#define M32R_SIO_CONSOLE &m32r_sio_console
+#else
+#define M32R_SIO_CONSOLE NULL
+#endif
+
+static struct uart_driver m32r_sio_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "sio",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = UART_NR,
+ .cons = M32R_SIO_CONSOLE,
+};
+
+/**
+ * m32r_sio_suspend_port - suspend one serial port
+ * @line: serial line number
+ *
+ * Suspend one serial port.
+ */
+void m32r_sio_suspend_port(int line)
+{
+ uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
+}
+
+/**
+ * m32r_sio_resume_port - resume one serial port
+ * @line: serial line number
+ *
+ * Resume one serial port.
+ */
+void m32r_sio_resume_port(int line)
+{
+ uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
+}
+
+static int __init m32r_sio_init(void)
+{
+ int ret, i;
+
+ printk(KERN_INFO "Serial: M32R SIO driver\n");
+
+ for (i = 0; i < nr_irqs; i++)
+ spin_lock_init(&irq_lists[i].lock);
+
+ ret = uart_register_driver(&m32r_sio_reg);
+ if (ret >= 0)
+ m32r_sio_register_ports(&m32r_sio_reg);
+
+ return ret;
+}
+
+static void __exit m32r_sio_exit(void)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++)
+ uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port);
+
+ uart_unregister_driver(&m32r_sio_reg);
+}
+
+module_init(m32r_sio_init);
+module_exit(m32r_sio_exit);
+
+EXPORT_SYMBOL(m32r_sio_suspend_port);
+EXPORT_SYMBOL(m32r_sio_resume_port);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic M32R SIO serial driver");
--- /dev/null
+/*
+ * m32r_sio.h
+ *
+ * Driver for M32R serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/serial/8250.h.
+ *
+ * Copyright (C) 2001 Russell King.
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+struct m32r_sio_probe {
+ struct module *owner;
+ int (*pci_init_one)(struct pci_dev *dev);
+ void (*pci_remove_one)(struct pci_dev *dev);
+ void (*pnp_init)(void);
+};
+
+int m32r_sio_register_probe(struct m32r_sio_probe *probe);
+void m32r_sio_unregister_probe(struct m32r_sio_probe *probe);
+void m32r_sio_get_irq_map(unsigned int *map);
+void m32r_sio_suspend_port(int line);
+void m32r_sio_resume_port(int line);
+
+struct old_serial_port {
+ unsigned int uart;
+ unsigned int baud_base;
+ unsigned int port;
+ unsigned int irq;
+ unsigned int flags;
+ unsigned char io_type;
+ unsigned char __iomem *iomem_base;
+ unsigned short iomem_reg_shift;
+};
+
+#define _INLINE_ inline
+
+#define PROBE_RSA (1 << 0)
+#define PROBE_ANY (~0)
+
+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
--- /dev/null
+/*
+ * m32r_sio_reg.h
+ *
+ * Copyright (C) 1992, 1994 by Theodore Ts'o.
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * Redistribution of this file is permitted under the terms of the GNU
+ * Public License (GPL)
+ *
+ * These are the UART port assignments, expressed as offsets from the base
+ * register. These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#ifndef _M32R_SIO_REG_H
+#define _M32R_SIO_REG_H
+
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+
+#define SIOCR 0x000
+#define SIOMOD0 0x002
+#define SIOMOD1 0x004
+#define SIOSTS 0x006
+#define SIOTRCR 0x008
+#define SIOBAUR 0x00a
+// #define SIORBAUR 0x018
+#define SIOTXB 0x00c
+#define SIORXB 0x00e
+
+#define UART_RX ((unsigned long) PLD_ESIO0RXB)
+ /* In: Receive buffer (DLAB=0) */
+#define UART_TX ((unsigned long) PLD_ESIO0TXB)
+ /* Out: Transmit buffer (DLAB=0) */
+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
+#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels
+ * XR16C85x only */
+
+#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
+#define UART_IER ((unsigned long) PLD_ESIO0INTCR)
+ /* Out: Interrupt Enable Register */
+#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
+ * XR16C85x only */
+
+#define UART_IIR 0 /* In: Interrupt ID Register */
+#define UART_FCR 0 /* Out: FIFO Control Register */
+#define UART_EFR 0 /* I/O: Extended Features Register */
+ /* (DLAB=1, 16C660 only) */
+
+#define UART_LCR 0 /* Out: Line Control Register */
+#define UART_MCR 0 /* Out: Modem Control Register */
+#define UART_LSR ((unsigned long) PLD_ESIO0STS)
+ /* In: Line Status Register */
+#define UART_MSR 0 /* In: Modem Status Register */
+#define UART_SCR 0 /* I/O: Scratch Register */
+#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
+ * FCTR bit 6 selects SCR or EMSR
+ * XR16c85x only */
+
+#else /* not CONFIG_SERIAL_M32R_PLDSIO */
+
+#define SIOCR 0x000
+#define SIOMOD0 0x004
+#define SIOMOD1 0x008
+#define SIOSTS 0x00c
+#define SIOTRCR 0x010
+#define SIOBAUR 0x014
+#define SIORBAUR 0x018
+#define SIOTXB 0x01c
+#define SIORXB 0x020
+
+#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */
+#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */
+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
+#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels
+ * XR16C85x only */
+
+#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
+#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */
+#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
+ * XR16C85x only */
+
+#define UART_IIR 0 /* In: Interrupt ID Register */
+#define UART_FCR 0 /* Out: FIFO Control Register */
+#define UART_EFR 0 /* I/O: Extended Features Register */
+ /* (DLAB=1, 16C660 only) */
+
+#define UART_LCR 0 /* Out: Line Control Register */
+#define UART_MCR 0 /* Out: Modem Control Register */
+#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */
+#define UART_MSR 0 /* In: Modem Status Register */
+#define UART_SCR 0 /* I/O: Scratch Register */
+#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
+ * FCTR bit 6 selects SCR or EMSR
+ * XR16c85x only */
+
+#endif /* CONFIG_SERIAL_M32R_PLDSIO */
+
+#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * These are the definitions for the Line Control Register
+ *
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
+#define UART_LCR_SBC 0x40 /* Set break control */
+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR 0x10 /* Even parity select */
+#define UART_LCR_PARITY 0x08 /* Parity Enable */
+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_TEMT 0x02 /* Transmitter empty */
+#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */
+#define UART_LSR_BI 0x00 /* Break interrupt indicator */
+#define UART_LSR_FE 0x80 /* Frame error indicator */
+#define UART_LSR_PE 0x40 /* Parity error indicator */
+#define UART_LSR_OE 0x20 /* Overrun error indicator */
+#define UART_LSR_DR 0x04 /* Receiver data ready */
+
+/*
+ * These are the definitions for the Interrupt Identification Register
+ */
+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
+
+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+
+/*
+ * These are the definitions for the Interrupt Enable Register
+ */
+#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */
+#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */
+#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */
+
+#endif /* _M32R_SIO_REG_H */
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff