int continuous;
};
+/*
+ * This function looks for a board matching the supplied PCI device.
+ */
+static const struct dio200_board *
+dio200_find_pci_board(struct pci_dev *pci_dev)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(dio200_boards); i++)
+ if (dio200_boards[i].bustype == pci_bustype &&
+ pci_dev->device == dio200_boards[i].devid)
+ return &dio200_boards[i];
+ return NULL;
+}
+
/*
* This function looks for a PCI device matching the requested board name,
* bus and slot.
continue;
}
if (thisboard->model == anypci_model) {
- /* Match any supported model. */
- int i;
-
- for (i = 0; i < ARRAY_SIZE(dio200_boards); i++) {
- if (dio200_boards[i].bustype != pci_bustype)
- continue;
- if (pci_dev->device == dio200_boards[i].devid) {
- /* Change board_ptr to matched board. */
- dev->board_ptr = &dio200_boards[i];
- thisboard = comedi_board(dev);
- break;
- }
- }
- if (i == ARRAY_SIZE(dio200_boards))
+ /* Wildcard board matches any supported PCI board. */
+ const struct dio200_board *foundboard;
+
+ foundboard = dio200_find_pci_board(pci_dev);
+ if (foundboard == NULL)
continue;
+ /* Replace wildcard board_ptr. */
+ dev->board_ptr = foundboard;
+ thisboard = comedi_board(dev);
} else {
/* Match specific model name. */
if (pci_dev->device != thisboard->devid)
dev_info(dev->class_dev, "%s %sattached\n", dev->board_name, tmpbuf);
}
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board. If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static int dio200_common_attach(struct comedi_device *dev, unsigned long iobase,
+ unsigned int irq, unsigned long req_irq_flags)
{
const struct dio200_board *thisboard = comedi_board(dev);
- struct dio200_private *devpriv;
+ struct dio200_private *devpriv = dev->private;
+ const struct dio200_layout_struct *layout =
+ &dio200_layouts[thisboard->layout];
struct comedi_subdevice *s;
- unsigned long iobase = 0;
- unsigned int irq = 0;
- const struct dio200_layout_struct *layout;
- int share_irq = 0;
int sdx;
- unsigned n;
+ unsigned int n;
int ret;
- dev_info(dev->class_dev, DIO200_DRIVER_NAME ": attach\n");
-
- ret = alloc_private(dev, sizeof(struct dio200_private));
- if (ret < 0) {
- dev_err(dev->class_dev, "error! out of memory!\n");
- return ret;
- }
- devpriv = dev->private;
-
- /* Process options and reserve resources according to bus type. */
- if (IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_ISA) &&
- thisboard->bustype == isa_bustype) {
- iobase = it->options[0];
- irq = it->options[1];
- share_irq = 0;
- ret = dio200_request_region(dev, iobase, DIO200_IO_SIZE);
- if (ret < 0)
- return ret;
- } else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_PCI) &&
- thisboard->bustype == pci_bustype) {
- struct pci_dev *pci_dev;
- int bus, slot;
-
- bus = it->options[0];
- slot = it->options[1];
- share_irq = 1;
- pci_dev = dio200_find_pci(dev, bus, slot);
- if (pci_dev == NULL)
- return -EIO;
- thisboard = comedi_board(dev); /* replaced wildcard board */
- devpriv->pci_dev = pci_dev;
- ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME);
- if (ret < 0) {
- dev_err(dev->class_dev,
- "error! cannot enable PCI device and request regions!\n");
- return ret;
- }
- iobase = pci_resource_start(pci_dev, 2);
- irq = pci_dev->irq;
- } else {
- dev_err(dev->class_dev, DIO200_DRIVER_NAME
- ": BUG! cannot determine board type!\n");
- return -EINVAL;
- }
-
devpriv->intr_sd = -1;
-
dev->iobase = iobase;
-
- layout = &dio200_layouts[thisboard->layout];
-
+ dev->board_name = thisboard->name;
ret = alloc_subdevices(dev, layout->n_subdevs);
if (ret < 0) {
dev_err(dev->class_dev, "error! out of memory!\n");
return ret;
}
-
for (n = 0; n < dev->n_subdevices; n++) {
s = &dev->subdevices[n];
switch (layout->sdtype[n]) {
layout->has_clk_gat_sce);
if (ret < 0)
return ret;
-
break;
case sd_8255:
/* digital i/o subdevice (8255) */
iobase + layout->sdinfo[n]);
if (ret < 0)
return ret;
-
break;
case sd_intr:
/* 'INTERRUPT' subdevice */
has_int_sce);
if (ret < 0)
return ret;
-
devpriv->intr_sd = n;
} else {
s->type = COMEDI_SUBD_UNUSED;
break;
}
}
-
sdx = devpriv->intr_sd;
if (sdx >= 0 && sdx < dev->n_subdevices)
dev->read_subdev = &dev->subdevices[sdx];
-
- dev->board_name = thisboard->name;
-
if (irq) {
- unsigned long flags = share_irq ? IRQF_SHARED : 0;
-
- if (request_irq(irq, dio200_interrupt, flags,
+ if (request_irq(irq, dio200_interrupt, req_irq_flags,
DIO200_DRIVER_NAME, dev) >= 0) {
dev->irq = irq;
} else {
"warning! irq %u unavailable!\n", irq);
}
}
-
dio200_report_attach(dev, irq);
return 1;
}
+static int dio200_pci_common_attach(struct comedi_device *dev,
+ struct pci_dev *pci_dev)
+{
+ struct dio200_private *devpriv = dev->private;
+ unsigned long iobase;
+ int ret;
+
+ devpriv->pci_dev = pci_dev;
+ ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME);
+ if (ret < 0) {
+ dev_err(dev->class_dev,
+ "error! cannot enable PCI device and request regions!\n");
+ return ret;
+ }
+ iobase = pci_resource_start(pci_dev, 2);
+ return dio200_common_attach(dev, iobase, pci_dev->irq, IRQF_SHARED);
+}
+
+/*
+ * Attach is called by the Comedi core to configure the driver
+ * for a particular board. If you specified a board_name array
+ * in the driver structure, dev->board_ptr contains that
+ * address.
+ */
+static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+ const struct dio200_board *thisboard = comedi_board(dev);
+ int ret;
+
+ dev_info(dev->class_dev, DIO200_DRIVER_NAME ": attach\n");
+
+ ret = alloc_private(dev, sizeof(struct dio200_private));
+ if (ret < 0) {
+ dev_err(dev->class_dev, "error! out of memory!\n");
+ return ret;
+ }
+
+ /* Process options and reserve resources according to bus type. */
+ if (IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_ISA) &&
+ thisboard->bustype == isa_bustype) {
+ unsigned long iobase;
+ unsigned int irq;
+
+ iobase = it->options[0];
+ irq = it->options[1];
+ ret = dio200_request_region(dev, iobase, DIO200_IO_SIZE);
+ if (ret < 0)
+ return ret;
+ return dio200_common_attach(dev, iobase, irq, 0);
+ } else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_PCI) &&
+ thisboard->bustype == pci_bustype) {
+ struct pci_dev *pci_dev;
+ int bus, slot;
+
+ bus = it->options[0];
+ slot = it->options[1];
+ pci_dev = dio200_find_pci(dev, bus, slot);
+ if (pci_dev == NULL)
+ return -EIO;
+ return dio200_pci_common_attach(dev, pci_dev);
+ } else {
+ dev_err(dev->class_dev, DIO200_DRIVER_NAME
+ ": BUG! cannot determine board type!\n");
+ return -EINVAL;
+ }
+}
+
+/*
+ * The attach_pci hook (if non-NULL) is called at PCI probe time in preference
+ * to the "manual" attach hook. dev->board_ptr is NULL on entry. There should
+ * be a board entry matching the supplied PCI device.
+ */
+static int __devinit dio200_attach_pci(struct comedi_device *dev,
+ struct pci_dev *pci_dev)
+{
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_PCI))
+ return -EINVAL;
+
+ dev_info(dev->class_dev, DIO200_DRIVER_NAME ": attach pci %s\n",
+ pci_name(pci_dev));
+ ret = alloc_private(dev, sizeof(struct dio200_private));
+ if (ret < 0) {
+ dev_err(dev->class_dev, "error! out of memory!\n");
+ return ret;
+ }
+ dev->board_ptr = dio200_find_pci_board(pci_dev);
+ if (dev->board_ptr == NULL) {
+ dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
+ return -EINVAL;
+ }
+ return dio200_pci_common_attach(dev, pci_dev);
+}
+
static void dio200_detach(struct comedi_device *dev)
{
const struct dio200_board *thisboard = comedi_board(dev);
.driver_name = DIO200_DRIVER_NAME,
.module = THIS_MODULE,
.attach = dio200_attach,
+ .attach_pci = dio200_attach_pci,
.detach = dio200_detach,
.board_name = &dio200_boards[0].name,
.offset = sizeof(struct dio200_board),
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff