x86: separate generic_processor_info into its own function

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse_32.c
index c487bc99d7a368d3b4cf35f1c960f9aa1ca26cb8..b0aed978eef1de37980544c8cbcdc82540729378 100644 (file)
--- a/arch/x86/kernel/mpparse_32.c
+++ b/arch/x86/kernel/mpparse_32.c
@@ -109,12 +109,91 @@ static int mpc_record;
 static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
 #endif
 
-static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
+static void __cpuinit generic_processor_info(int apicid, int version)
 {
-       int ver, apicid, cpu;
+       int cpu;
        cpumask_t tmp_map;
        physid_mask_t phys_cpu;
        
+
+       /*
+        * Validate version
+        */
+       if (version == 0x0) {
+               printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+                               "fixing up to 0x10. (tell your hw vendor)\n",
+                               version);
+               version = 0x10;
+       }
+       apic_version[apicid] = version;
+
+       phys_cpu = apicid_to_cpu_present(apicid);
+       physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+       if (num_processors >= NR_CPUS) {
+               printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+                       "  Processor ignored.\n", NR_CPUS);
+               return;
+       }
+
+       if (num_processors >= maxcpus) {
+               printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+                       " Processor ignored.\n", maxcpus);
+               return;
+       }
+
+       num_processors++;
+       cpus_complement(tmp_map, cpu_present_map);
+       cpu = first_cpu(tmp_map);
+
+       if (apicid == boot_cpu_physical_apicid)
+               /*
+                * x86_bios_cpu_apicid is required to have processors listed
+                * in same order as logical cpu numbers. Hence the first
+                * entry is BSP, and so on.
+                */
+               cpu = 0;
+
+       /*
+        * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+        * but we need to work other dependencies like SMP_SUSPEND etc
+        * before this can be done without some confusion.
+        * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+        *       - Ashok Raj <ashok.raj@intel.com>
+        */
+       if (num_processors > 8) {
+               switch (boot_cpu_data.x86_vendor) {
+               case X86_VENDOR_INTEL:
+                       if (!APIC_XAPIC(version)) {
+                               def_to_bigsmp = 0;
+                               break;
+                       }
+                       /* If P4 and above fall through */
+               case X86_VENDOR_AMD:
+                       def_to_bigsmp = 1;
+               }
+       }
+#ifdef CONFIG_SMP
+       /* are we being called early in kernel startup? */
+       if (x86_cpu_to_apicid_early_ptr) {
+               u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
+               u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+
+               cpu_to_apicid[cpu] = apicid;
+               bios_cpu_apicid[cpu] = apicid;
+       } else {
+               per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+               per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
+       }
+#endif
+       cpu_set(cpu, cpu_possible_map);
+       cpu_set(cpu, cpu_present_map);
+}
+
+static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
+{
+       int apicid;
+
        if (!(m->mpc_cpuflag & CPU_ENABLED)) {
                disabled_cpus++;
                return;
@@ -184,80 +263,7 @@ static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
                boot_cpu_physical_apicid = m->mpc_apicid;
        }
 
-       ver = m->mpc_apicver;
-
-       /*
-        * Validate version
-        */
-       if (ver == 0x0) {
-               printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
-                               "fixing up to 0x10. (tell your hw vendor)\n",
-                               m->mpc_apicid);
-               ver = 0x10;
-       }
-       apic_version[m->mpc_apicid] = ver;
-
-       phys_cpu = apicid_to_cpu_present(apicid);
-       physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
-       if (num_processors >= NR_CPUS) {
-               printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-                       "  Processor ignored.\n", NR_CPUS);
-               return;
-       }
-
-       if (num_processors >= maxcpus) {
-               printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-                       " Processor ignored.\n", maxcpus);
-               return;
-       }
-
-       num_processors++;
-       cpus_complement(tmp_map, cpu_present_map);
-       cpu = first_cpu(tmp_map);
-
-       if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
-               /*
-                * x86_bios_cpu_apicid is required to have processors listed
-                * in same order as logical cpu numbers. Hence the first
-                * entry is BSP, and so on.
-                */
-               cpu = 0;
-
-       /*
-        * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
-        * but we need to work other dependencies like SMP_SUSPEND etc
-        * before this can be done without some confusion.
-        * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
-        *       - Ashok Raj <ashok.raj@intel.com>
-        */
-       if (num_processors > 8) {
-               switch (boot_cpu_data.x86_vendor) {
-               case X86_VENDOR_INTEL:
-                       if (!APIC_XAPIC(ver)) {
-                               def_to_bigsmp = 0;
-                               break;
-                       }
-                       /* If P4 and above fall through */
-               case X86_VENDOR_AMD:
-                       def_to_bigsmp = 1;
-               }
-       }
-#ifdef CONFIG_SMP
-       /* are we being called early in kernel startup? */
-       if (x86_cpu_to_apicid_early_ptr) {
-               u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
-               u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
-
-               cpu_to_apicid[cpu] = m->mpc_apicid;
-               bios_cpu_apicid[cpu] = m->mpc_apicid;
-       } else {
-               per_cpu(x86_cpu_to_apicid, cpu) = m->mpc_apicid;
-               per_cpu(x86_bios_cpu_apicid, cpu) = m->mpc_apicid;
-       }
-#endif
-       cpu_set(cpu, cpu_possible_map);
-       cpu_set(cpu, cpu_present_map);
+       generic_processor_info(apicid, m->mpc_apicver);
 }
 
 static void __init MP_bus_info (struct mpc_config_bus *m)