#include <linux/byteorder/generic.h>
#include <linux/errno.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/fs.h>
#include <linux/if_ether.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
+#include <linux/kref.h>
#include <linux/netdevice.h>
#include <linux/random.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
+#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/workqueue.h>
+#include <net/cfg80211.h>
#include "bat_algo.h"
#include "bat_v_ogm.h"
msecs_to_jiffies(msecs));
}
+/**
+ * batadv_v_elp_get_throughput - get the throughput towards a neighbour
+ * @neigh: the neighbour for which the throughput has to be obtained
+ *
+ * Return: The throughput towards the given neighbour in multiples of 100kpbs
+ * (a value of '1' equals to 0.1Mbps, '10' equals 1Mbps, etc).
+ */
+static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
+{
+ struct batadv_hard_iface *hard_iface = neigh->if_incoming;
+ struct ethtool_link_ksettings link_settings;
+ struct station_info sinfo;
+ u32 throughput;
+ int ret;
+
+ /* if the user specified a customised value for this interface, then
+ * return it directly
+ */
+ throughput = atomic_read(&hard_iface->bat_v.throughput_override);
+ if (throughput != 0)
+ return throughput;
+
+ /* if this is a wireless device, then ask its throughput through
+ * cfg80211 API
+ */
+ if (batadv_is_wifi_netdev(hard_iface->net_dev)) {
+ if (hard_iface->net_dev->ieee80211_ptr) {
+ ret = cfg80211_get_station(hard_iface->net_dev,
+ neigh->addr, &sinfo);
+ if (ret == -ENOENT) {
+ /* Node is not associated anymore! It would be
+ * possible to delete this neighbor. For now set
+ * the throughput metric to 0.
+ */
+ return 0;
+ }
+ if (!ret)
+ return sinfo.expected_throughput / 100;
+ }
+
+ /* unsupported WiFi driver version */
+ goto default_throughput;
+ }
+
+ /* if not a wifi interface, check if this device provides data via
+ * ethtool (e.g. an Ethernet adapter)
+ */
+ memset(&link_settings, 0, sizeof(link_settings));
+ rtnl_lock();
+ ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings);
+ rtnl_unlock();
+ if (ret == 0) {
+ /* link characteristics might change over time */
+ if (link_settings.base.duplex == DUPLEX_FULL)
+ hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
+ else
+ hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
+
+ throughput = link_settings.base.speed;
+ if (throughput && (throughput != SPEED_UNKNOWN))
+ return throughput * 10;
+ }
+
+default_throughput:
+ if (!(hard_iface->bat_v.flags & BATADV_WARNING_DEFAULT)) {
+ batadv_info(hard_iface->soft_iface,
+ "WiFi driver or ethtool info does not provide information about link speeds on interface %s, therefore defaulting to hardcoded throughput values of %u.%1u Mbps. Consider overriding the throughput manually or checking your driver.\n",
+ hard_iface->net_dev->name,
+ BATADV_THROUGHPUT_DEFAULT_VALUE / 10,
+ BATADV_THROUGHPUT_DEFAULT_VALUE % 10);
+ hard_iface->bat_v.flags |= BATADV_WARNING_DEFAULT;
+ }
+
+ /* if none of the above cases apply, return the base_throughput */
+ return BATADV_THROUGHPUT_DEFAULT_VALUE;
+}
+
+/**
+ * batadv_v_elp_throughput_metric_update - worker updating the throughput metric
+ * of a single hop neighbour
+ * @work: the work queue item
+ */
+void batadv_v_elp_throughput_metric_update(struct work_struct *work)
+{
+ struct batadv_hardif_neigh_node_bat_v *neigh_bat_v;
+ struct batadv_hardif_neigh_node *neigh;
+
+ neigh_bat_v = container_of(work, struct batadv_hardif_neigh_node_bat_v,
+ metric_work);
+ neigh = container_of(neigh_bat_v, struct batadv_hardif_neigh_node,
+ bat_v);
+
+ ewma_throughput_add(&neigh->bat_v.throughput,
+ batadv_v_elp_get_throughput(neigh));
+
+ /* decrement refcounter to balance increment performed before scheduling
+ * this task
+ */
+ batadv_hardif_neigh_put(neigh);
+}
+
/**
* batadv_v_elp_periodic_work - ELP periodic task per interface
* @work: work queue item
*/
static void batadv_v_elp_periodic_work(struct work_struct *work)
{
+ struct batadv_hardif_neigh_node *hardif_neigh;
struct batadv_hard_iface *hard_iface;
struct batadv_hard_iface_bat_v *bat_v;
struct batadv_elp_packet *elp_packet;
atomic_inc(&hard_iface->bat_v.elp_seqno);
+ /* The throughput metric is updated on each sent packet. This way, if a
+ * node is dead and no longer sends packets, batman-adv is still able to
+ * react timely to its death.
+ *
+ * The throughput metric is updated by following these steps:
+ * 1) if the hard_iface is wifi => send a number of unicast ELPs for
+ * probing/sampling to each neighbor
+ * 2) update the throughput metric value of each neighbor (note that the
+ * value retrieved in this step might be 100ms old because the
+ * probing packets at point 1) could still be in the HW queue)
+ */
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(hardif_neigh, &hard_iface->neigh_list, list) {
+ if (!kref_get_unless_zero(&hardif_neigh->refcount))
+ continue;
+
+ /* Reading the estimated throughput from cfg80211 is a task that
+ * may sleep and that is not allowed in an rcu protected
+ * context. Therefore schedule a task for that.
+ */
+ queue_work(batadv_event_workqueue,
+ &hardif_neigh->bat_v.metric_work);
+ }
+ rcu_read_unlock();
+
restart_timer:
batadv_v_elp_start_timer(hard_iface);
out:
atomic_set(&hard_iface->bat_v.elp_seqno, random_seqno);
atomic_set(&hard_iface->bat_v.elp_interval, 500);
+ /* assume full-duplex by default */
+ hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
+
+ /* warn the user (again) if there is no throughput data is available */
+ hard_iface->bat_v.flags &= ~BATADV_WARNING_DEFAULT;
+
+ if (batadv_is_wifi_netdev(hard_iface->net_dev))
+ hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
+
INIT_DELAYED_WORK(&hard_iface->bat_v.elp_wq,
batadv_v_elp_periodic_work);
batadv_v_elp_start_timer(hard_iface);
atomic_t ogm_seqno;
};
+/**
+ * enum batadv_v_hard_iface_flags - interface flags useful to B.A.T.M.A.N. V
+ * @BATADV_FULL_DUPLEX: tells if the connection over this link is full-duplex
+ * @BATADV_WARNING_DEFAULT: tells whether we have warned the user that no
+ * throughput data is available for this interface and that default values are
+ * assumed.
+ */
+enum batadv_v_hard_iface_flags {
+ BATADV_FULL_DUPLEX = BIT(0),
+ BATADV_WARNING_DEFAULT = BIT(1),
+};
+
/**
* struct batadv_hard_iface_bat_v - per hard-interface B.A.T.M.A.N. V data
* @elp_interval: time interval between two ELP transmissions
* @elp_skb: base skb containing the ELP message to send
* @elp_wq: workqueue used to schedule ELP transmissions
* @throughput_override: throughput override to disable link auto-detection
+ * @flags: interface specific flags
*/
struct batadv_hard_iface_bat_v {
atomic_t elp_interval;
struct sk_buff *elp_skb;
struct delayed_work elp_wq;
atomic_t throughput_override;
+ u8 flags;
};
/**
* @elp_interval: time interval between two ELP transmissions
* @elp_latest_seqno: latest and best known ELP sequence number
* @last_unicast_tx: when the last unicast packet has been sent to this neighbor
+ * @metric_work: work queue callback item for metric update
*/
struct batadv_hardif_neigh_node_bat_v {
struct ewma_throughput throughput;
u32 elp_interval;
u32 elp_latest_seqno;
unsigned long last_unicast_tx;
+ struct work_struct metric_work;
};
/**
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff