u32 Addr[2];
u32 i, Control;
u16 Register;
- u8 EthAddr[NODE_ADDRESS_SIZE];
+ u8 EthAddr[ETH_ALEN];
bool KeyValid;
if (is_valid_ether_addr(hw->perm_mac_addr))
*(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
if (is_valid_ether_addr(EthAddr)) {
- memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
+ memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN);
return 0;
}
return 1;
*(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
*(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *)&Addr[1]);
if (is_valid_ether_addr(EthAddr)) {
- memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
+ memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN);
return 0;
}
/* maybe MAC-address is from BIOS */
*(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
if (is_valid_ether_addr(EthAddr)) {
- memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
+ memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN);
return 0;
}
*/
static s32 atl2_read_mac_addr(struct atl2_hw *hw)
{
- u16 i;
-
if (get_permanent_address(hw)) {
/* for test */
/* FIXME: shouldn't we use random_ether_addr() here? */
hw->perm_mac_addr[5] = 0x38;
}
- for (i = 0; i < NODE_ADDRESS_SIZE; i++)
- hw->mac_addr[i] = hw->perm_mac_addr[i];
+ memcpy(hw->mac_addr, hw->perm_mac_addr, ETH_ALEN);
return 0;
}
#define PCI_COMMAND_REGISTER PCI_COMMAND
#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
-#define ETH_ADDR_LEN ETH_ALEN
#define ATL2_WRITE_REG(a, reg, value) (iowrite32((value), \
((a)->hw_addr + (reg))))
u8 flash_vendor;
u8 dma_fairness;
- u8 mac_addr[NODE_ADDRESS_SIZE];
- u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+ u8 mac_addr[ETH_ALEN];
+ u8 perm_mac_addr[ETH_ALEN];
/* FIXME */
/* bool phy_preamble_sup; */