Kconfig: Remove useless "default N" lines

A number of Kconfig entries default to (uppercase) "N". It was clearly
intended to use "default n". But since (lowercase) "n" is the default
anyway, these lines might as well be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 9063ae6553ccb7a0a220b8db667ac770627addbf..3d7f1137a21b01620b3b36b0a52dadf5e8f4850f 100644 (file)
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -356,7 +356,6 @@ config ARC_CURR_IN_REG
 
 config ARC_MISALIGN_ACCESS
        bool "Emulate unaligned memory access (userspace only)"
-       default N
        select SYSCTL_ARCH_UNALIGN_NO_WARN
        select SYSCTL_ARCH_UNALIGN_ALLOW
        help

diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 6792503aaf79effd5adfcf50591d0978de6c729c..15a9ed1d579cf8ca10cbc38795c7a2b775449012 100644 (file)
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -11,7 +11,6 @@ config ETRAX_ETHERNET
 config ETRAX_NO_PHY
        bool "PHY not present"
        depends on ETRAX_ETHERNET
-       default N
        help
          This option disables all MDIO communication with an ethernet
          transceiver connected to the MII interface. This option shall
@@ -116,7 +115,6 @@ config ETRAX_AXISFLASHMAP
 config ETRAX_AXISFLASHMAP_MTD0WHOLE
        bool "MTD0 is whole boot flash device"
        depends on ETRAX_AXISFLASHMAP
-       default N
        help
          When this option is not set, mtd0 refers to the first partition
          on the boot flash device. When set, mtd0 refers to the whole

diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
index e42b331edbc60316b56ed7739e6cb22a6b6bc140..462a5b1d8651746c9d653efa7f01dab88f100e8d 100644 (file)
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@@ -4,7 +4,6 @@ config INTEL_MIC_HOST
        tristate "Intel MIC Host Driver"
        depends on 64BIT && PCI && X86
        select VHOST_RING
-       default N
        help
          This enables Host Driver support for the Intel Many Integrated
          Core (MIC) family of PCIe form factor coprocessor devices that
@@ -25,7 +24,6 @@ config INTEL_MIC_CARD
        tristate "Intel MIC Card Driver"
        depends on 64BIT && X86
        select VIRTIO
-       default N
        help
          This enables card driver support for the Intel Many Integrated
          Core (MIC) device family. The card driver communicates shutdown/

diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index 1e9ab6dfc90d446f84fdec75891a30683bb13927..22cf17dcb7da6e4b17ff3e40ab487409e2ae75ec 100644 (file)
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -2,7 +2,6 @@ menu "Android"
 
 config ANDROID
        bool "Android Drivers"
-       default N
        ---help---
          Enable support for various drivers needed on the Android platform
 
@@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO
 
 config ANDROID_LOW_MEMORY_KILLER
        bool "Android Low Memory Killer"
-       default N
        ---help---
          Registers processes to be killed when memory is low
 

diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig
index 83c9752504d47cd16d45f369bd7842917e9288ff..8acf4b24a7c97114c4be5eafc4da7cad3818ccf6 100644 (file)
--- a/drivers/staging/bcm/Kconfig
+++ b/drivers/staging/bcm/Kconfig
@@ -1,7 +1,6 @@
 config BCM_WIMAX
        tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support"
        depends on USB && NET
-       default N
        help
          This is an experimental driver for the Beceem WIMAX chipset used
         by Sprint 4G.

diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig
index 7121853bd39741845fd390a258cefeaf8cc18ce6..4da290b2f5bd072679c6ea57879077f029e49de8 100644 (file)
--- a/drivers/staging/frontier/Kconfig
+++ b/drivers/staging/frontier/Kconfig
@@ -1,6 +1,5 @@
 config TRANZPORT
        tristate "Frontier Tranzport and Alphatrack support"
        depends on USB
-       default N
        ---help---
          Enable support for the Frontier Tranzport and Alphatrack devices.

diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig
index 04bd0fba7b1f3441c5f986aca803ad9be71374aa..95a3af644a9240f36fae7eddac3d62cdc6c8d7cb 100644 (file)
--- a/drivers/staging/media/go7007/Kconfig
+++ b/drivers/staging/media/go7007/Kconfig
@@ -13,7 +13,6 @@ config VIDEO_GO7007
        select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
        select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
        select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
-       default N
        ---help---
          This is a video4linux driver for the WIS GO7007 MPEG
          encoder chip.
@@ -24,7 +23,6 @@ config VIDEO_GO7007
 config VIDEO_GO7007_USB
        tristate "WIS GO7007 USB support"
        depends on VIDEO_GO7007 && USB
-       default N
        ---help---
          This is a video4linux driver for the WIS GO7007 MPEG
          encoder chip over USB.
@@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER
 config VIDEO_GO7007_USB_S2250_BOARD
        tristate "Sensoray 2250/2251 support"
        depends on VIDEO_GO7007_USB && USB
-       default N
        ---help---
          This is a video4linux driver for the Sensoray 2250/2251 device.
 

diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 3162aabbeb07811faaceb2cf5ccaaec7a1c29950..ff8d41ebca36a091e8e2c8658716971fdfd5db2e 100644 (file)
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -6,6 +6,5 @@ config R8187SE
        select WEXT_PRIV
        select EEPROM_93CX6
        select CRYPTO
-       default N
        ---help---
          If built as a module, it will be called r8187se.ko.

diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
index c9c548f174949b1e570d346217d32a8b9565b8e5..70fecfabc0c7c5caaba5517049bc27f75b8ed840 100644 (file)
--- a/drivers/staging/rtl8188eu/Kconfig
+++ b/drivers/staging/rtl8188eu/Kconfig
@@ -3,7 +3,6 @@ config R8188EU
        depends on WLAN && USB
        select WIRELESS_EXT
        select WEXT_PRIV
-       default N
        ---help---
        This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
        If built as a module, it will be called r8188eu.

diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig
index 50e0d91a409a4affffe4389d733bb765a3df9373..ad82bc348a75cc89d680196a330e41cec9429c05 100644 (file)
--- a/drivers/staging/rtl8192e/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig
@@ -5,5 +5,4 @@ config RTL8192E
        select WIRELESS_EXT
        select WEXT_PRIV
        select CRYPTO
-       default N
        ---help---

diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig
index 3f055091b35f6aaa6e8619f131d3af18ff335c37..3ee9d0d00fb67ca05c4c0ac6e9745c4c384b3064 100644 (file)
--- a/drivers/staging/rtl8192u/Kconfig
+++ b/drivers/staging/rtl8192u/Kconfig
@@ -5,5 +5,4 @@ config RTL8192U
        select WIRELESS_EXT
        select WEXT_PRIV
        select CRYPTO
-       default N
        ---help---

diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
index 6a43312380e0a6e7f7e9e8086f9d17d174285352..f160eee52f0950066af880c652119797abaa6672 100644 (file)
--- a/drivers/staging/rtl8712/Kconfig
+++ b/drivers/staging/rtl8712/Kconfig
@@ -4,7 +4,6 @@ config R8712U
        select WIRELESS_EXT
        select WEXT_PRIV
        select FW_LOADER
-       default N
        ---help---
        This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
        If built as a module, it will be called r8712u.
@@ -12,7 +11,6 @@ config R8712U
 config R8712_TX_AGGR
        bool "Realtek RTL8712U Transmit Aggregation code"
        depends on R8712U && BROKEN
-       default N
        ---help---
        This option provides transmit aggregation for the Realtek RTL8712 USB device.
 

diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig
index 886000980474a43b081cc6547a26a9fe12f76be2..bd99e9e47e50982523e9b5fc4e27533d2b060f25 100644 (file)
--- a/drivers/staging/usbip/Kconfig
+++ b/drivers/staging/usbip/Kconfig
@@ -1,7 +1,6 @@
 config USBIP_CORE
        tristate "USB/IP support"
        depends on USB && NET
-       default N
        ---help---
          This enables pushing USB packets over IP to allow remote
          machines direct access to USB devices. It provides the
@@ -18,7 +17,6 @@ config USBIP_CORE
 config USBIP_VHCI_HCD
        tristate "VHCI hcd"
        depends on USBIP_CORE
-       default N
        ---help---
          This enables the USB/IP virtual host controller driver,
          which is run on the remote machine.
@@ -29,7 +27,6 @@ config USBIP_VHCI_HCD
 config USBIP_HOST
        tristate "Host driver"
        depends on USBIP_CORE
-       default N
        ---help---
          This enables the USB/IP host driver, which is run on the
          machine that is sharing the USB devices.
@@ -40,6 +37,5 @@ config USBIP_HOST
 config USBIP_DEBUG
        bool "Debug messages for USB/IP"
        depends on USBIP_CORE
-       default N
        ---help---
          This enables the debug messages from the USB/IP drivers.

diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index fed7f68d025d1174e9e6882c3cba59a94de8220d..cb8e99156f5a711b0e9154ecd7f5acbc3e82b2ab 100644 (file)
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -10,7 +10,6 @@ config USB_DEBUG
 
 config USB_ANNOUNCE_NEW_DEVICES
        bool "USB announce new devices"
-       default N
        help
          Say Y here if you want the USB core to always announce the
          idVendor, idProduct, Manufacturer, Product, and SerialNumber

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a9707da7da0bff969c68d6d5a0fa66f2816ef8b7..c8b4161613cf8a63b94d88512062a0fc04f5d029 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -314,7 +314,6 @@ config USB_ISP1760_HCD
 
 config USB_ISP1362_HCD
        tristate "ISP1362 HCD support"
-       default N
        ---help---
          Supports the Philips ISP1362 chip as a host controller
 
@@ -326,7 +325,6 @@ config USB_ISP1362_HCD
 config USB_FUSBH200_HCD
        tristate "FUSBH200 HCD support"
        depends on USB
-       default N
        ---help---
        Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
        with minor modification.
@@ -337,7 +335,6 @@ config USB_FUSBH200_HCD
 config USB_FOTG210_HCD
        tristate "FOTG210 HCD support"
        depends on USB
-       default N
        ---help---
          Faraday FOTG210 is an OTG controller which can be configured as
          an USB2.0 host. It is designed to meet USB2.0 EHCI specification