ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs

As per mmc device tree binding documentation card detect gpio has
to be active low signal. When a hardware is designed with active
high card detect, gpio polarity has to be changed with
cd-inverted dt property.

In AM335x the card detect gpio is designed as active low gpio.
So correcting the dt card detect gpio definition.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index fec78349c1f3c895fbd1dcf36782d16b9c891d93..5d370d54bd30e18a42c675341ba57d9d82cf8783 100644 (file)
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -383,8 +383,7 @@
        bus-width = <0x4>;
        pinctrl-names = "default";
        pinctrl-0 = <&mmc1_pins>;
-       cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-       cd-inverted;
+       cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &aes {

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 1942a5c8132d74a3df239f99104ffd762a9b4f20..d9d00ab863a21735312ff2d53a6830c48ad425ff 100644 (file)
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -737,7 +737,7 @@
        bus-width = <4>;
        pinctrl-names = "default";
        pinctrl-0 = <&mmc1_pins>;
-       cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+       cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &mmc3 {

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 315bb02c99207ffe1934bb4a81de32857b3ca560..89442e98a8375c965dc117fd2e04da3be6e8d2de 100644 (file)
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -647,7 +647,7 @@
        bus-width = <4>;
        pinctrl-names = "default";
        pinctrl-0 = <&mmc1_pins>;
-       cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+       cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &sham {