#include <linux/device-mapper.h>
#define DM_MSG_PREFIX "raid"
+#define MAX_RAID_DEVICES 253 /* raid4/5/6 limit */
static bool devices_handle_discard_safely = false;
};
/*
- * Flags for rs->print_flags field.
+ * Flags for rs->ctr_flags field.
*/
-#define DMPF_SYNC 0x1
-#define DMPF_NOSYNC 0x2
-#define DMPF_REBUILD 0x4
-#define DMPF_DAEMON_SLEEP 0x8
-#define DMPF_MIN_RECOVERY_RATE 0x10
-#define DMPF_MAX_RECOVERY_RATE 0x20
-#define DMPF_MAX_WRITE_BEHIND 0x40
-#define DMPF_STRIPE_CACHE 0x80
-#define DMPF_REGION_SIZE 0x100
-#define DMPF_RAID10_COPIES 0x200
-#define DMPF_RAID10_FORMAT 0x400
+#define CTR_FLAG_SYNC 0x1
+#define CTR_FLAG_NOSYNC 0x2
+#define CTR_FLAG_REBUILD 0x4
+#define CTR_FLAG_DAEMON_SLEEP 0x8
+#define CTR_FLAG_MIN_RECOVERY_RATE 0x10
+#define CTR_FLAG_MAX_RECOVERY_RATE 0x20
+#define CTR_FLAG_MAX_WRITE_BEHIND 0x40
+#define CTR_FLAG_STRIPE_CACHE 0x80
+#define CTR_FLAG_REGION_SIZE 0x100
+#define CTR_FLAG_RAID10_COPIES 0x200
+#define CTR_FLAG_RAID10_FORMAT 0x400
struct raid_set {
struct dm_target *ti;
uint32_t bitmap_loaded;
- uint32_t print_flags;
+ uint32_t ctr_flags;
struct mddev md;
struct raid_type *raid_type;
{
unsigned n = 1, f = 1;
- if (!strcmp("near", format))
+ if (!strcasecmp("near", format))
n = copies;
else
f = copies;
- if (!strcmp("offset", format))
+ if (!strcasecmp("offset", format))
return 0x30000 | (f << 8) | n;
- if (!strcmp("far", format))
+ if (!strcasecmp("far", format))
return 0x20000 | (f << 8) | n;
return (f << 8) | n;
for (i = 0; i < num_raid_params; i++) {
if (!strcasecmp(argv[i], "nosync")) {
rs->md.recovery_cp = MaxSector;
- rs->print_flags |= DMPF_NOSYNC;
+ rs->ctr_flags |= CTR_FLAG_NOSYNC;
continue;
}
if (!strcasecmp(argv[i], "sync")) {
rs->md.recovery_cp = 0;
- rs->print_flags |= DMPF_SYNC;
+ rs->ctr_flags |= CTR_FLAG_SYNC;
continue;
}
return -EINVAL;
}
raid10_format = argv[i];
- rs->print_flags |= DMPF_RAID10_FORMAT;
+ rs->ctr_flags |= CTR_FLAG_RAID10_FORMAT;
continue;
}
}
clear_bit(In_sync, &rs->dev[value].rdev.flags);
rs->dev[value].rdev.recovery_offset = 0;
- rs->print_flags |= DMPF_REBUILD;
+ rs->ctr_flags |= CTR_FLAG_REBUILD;
} else if (!strcasecmp(key, "write_mostly")) {
if (rs->raid_type->level != 1) {
rs->ti->error = "write_mostly option is only valid for RAID1";
rs->ti->error = "max_write_behind option is only valid for RAID1";
return -EINVAL;
}
- rs->print_flags |= DMPF_MAX_WRITE_BEHIND;
+ rs->ctr_flags |= CTR_FLAG_MAX_WRITE_BEHIND;
/*
* In device-mapper, we specify things in sectors, but
}
rs->md.bitmap_info.max_write_behind = value;
} else if (!strcasecmp(key, "daemon_sleep")) {
- rs->print_flags |= DMPF_DAEMON_SLEEP;
+ rs->ctr_flags |= CTR_FLAG_DAEMON_SLEEP;
if (!value || (value > MAX_SCHEDULE_TIMEOUT)) {
rs->ti->error = "daemon sleep period out of range";
return -EINVAL;
}
rs->md.bitmap_info.daemon_sleep = value;
} else if (!strcasecmp(key, "stripe_cache")) {
- rs->print_flags |= DMPF_STRIPE_CACHE;
+ rs->ctr_flags |= CTR_FLAG_STRIPE_CACHE;
/*
* In device-mapper, we specify things in sectors, but
return -EINVAL;
}
} else if (!strcasecmp(key, "min_recovery_rate")) {
- rs->print_flags |= DMPF_MIN_RECOVERY_RATE;
+ rs->ctr_flags |= CTR_FLAG_MIN_RECOVERY_RATE;
if (value > INT_MAX) {
rs->ti->error = "min_recovery_rate out of range";
return -EINVAL;
}
rs->md.sync_speed_min = (int)value;
} else if (!strcasecmp(key, "max_recovery_rate")) {
- rs->print_flags |= DMPF_MAX_RECOVERY_RATE;
+ rs->ctr_flags |= CTR_FLAG_MAX_RECOVERY_RATE;
if (value > INT_MAX) {
rs->ti->error = "max_recovery_rate out of range";
return -EINVAL;
}
rs->md.sync_speed_max = (int)value;
} else if (!strcasecmp(key, "region_size")) {
- rs->print_flags |= DMPF_REGION_SIZE;
+ rs->ctr_flags |= CTR_FLAG_REGION_SIZE;
region_size = value;
} else if (!strcasecmp(key, "raid10_copies") &&
(rs->raid_type->level == 10)) {
rs->ti->error = "Bad value for 'raid10_copies'";
return -EINVAL;
}
- rs->print_flags |= DMPF_RAID10_COPIES;
+ rs->ctr_flags |= CTR_FLAG_RAID10_COPIES;
raid10_copies = value;
} else {
DMERR("Unable to parse RAID parameter: %s", key);
return -EINVAL;
}
- if (!(rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC)))
+ if (!(rs->ctr_flags & (CTR_FLAG_SYNC | CTR_FLAG_NOSYNC)))
mddev->recovery_cp = le64_to_cpu(sb->array_resync_offset);
/*
freshest = NULL;
rdev_for_each_safe(rdev, tmp, mddev) {
/*
- * Skipping super_load due to DMPF_SYNC will cause
+ * Skipping super_load due to CTR_FLAG_SYNC will cause
* the array to undergo initialization again as
* though it were new. This is the intended effect
* of the "sync" directive.
* that the "sync" directive is disallowed during the
* reshape.
*/
- if (rs->print_flags & DMPF_SYNC)
+ if (rs->ctr_flags & CTR_FLAG_SYNC)
continue;
if (!rdev->meta_bdev)
}
if ((kstrtoul(argv[num_raid_params], 10, &num_raid_devs) < 0) ||
- (num_raid_devs >= INT_MAX)) {
+ (num_raid_devs > MAX_RAID_DEVICES)) {
ti->error = "Cannot understand number of raid devices";
return -EINVAL;
}
case STATUSTYPE_TABLE:
/* The string you would use to construct this array */
for (i = 0; i < rs->md.raid_disks; i++) {
- if ((rs->print_flags & DMPF_REBUILD) &&
+ if ((rs->ctr_flags & CTR_FLAG_REBUILD) &&
rs->dev[i].data_dev &&
!test_bit(In_sync, &rs->dev[i].rdev.flags))
raid_param_cnt += 2; /* for rebuilds */
raid_param_cnt += 2;
}
- raid_param_cnt += (hweight32(rs->print_flags & ~DMPF_REBUILD) * 2);
- if (rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC))
+ raid_param_cnt += (hweight32(rs->ctr_flags & ~CTR_FLAG_REBUILD) * 2);
+ if (rs->ctr_flags & (CTR_FLAG_SYNC | CTR_FLAG_NOSYNC))
raid_param_cnt--;
DMEMIT("%s %u %u", rs->raid_type->name,
raid_param_cnt, rs->md.chunk_sectors);
- if ((rs->print_flags & DMPF_SYNC) &&
+ if ((rs->ctr_flags & CTR_FLAG_SYNC) &&
(rs->md.recovery_cp == MaxSector))
DMEMIT(" sync");
- if (rs->print_flags & DMPF_NOSYNC)
+ if (rs->ctr_flags & CTR_FLAG_NOSYNC)
DMEMIT(" nosync");
for (i = 0; i < rs->md.raid_disks; i++)
- if ((rs->print_flags & DMPF_REBUILD) &&
+ if ((rs->ctr_flags & CTR_FLAG_REBUILD) &&
rs->dev[i].data_dev &&
!test_bit(In_sync, &rs->dev[i].rdev.flags))
DMEMIT(" rebuild %u", i);
- if (rs->print_flags & DMPF_DAEMON_SLEEP)
+ if (rs->ctr_flags & CTR_FLAG_DAEMON_SLEEP)
DMEMIT(" daemon_sleep %lu",
rs->md.bitmap_info.daemon_sleep);
- if (rs->print_flags & DMPF_MIN_RECOVERY_RATE)
+ if (rs->ctr_flags & CTR_FLAG_MIN_RECOVERY_RATE)
DMEMIT(" min_recovery_rate %d", rs->md.sync_speed_min);
- if (rs->print_flags & DMPF_MAX_RECOVERY_RATE)
+ if (rs->ctr_flags & CTR_FLAG_MAX_RECOVERY_RATE)
DMEMIT(" max_recovery_rate %d", rs->md.sync_speed_max);
for (i = 0; i < rs->md.raid_disks; i++)
test_bit(WriteMostly, &rs->dev[i].rdev.flags))
DMEMIT(" write_mostly %u", i);
- if (rs->print_flags & DMPF_MAX_WRITE_BEHIND)
+ if (rs->ctr_flags & CTR_FLAG_MAX_WRITE_BEHIND)
DMEMIT(" max_write_behind %lu",
rs->md.bitmap_info.max_write_behind);
- if (rs->print_flags & DMPF_STRIPE_CACHE) {
+ if (rs->ctr_flags & CTR_FLAG_STRIPE_CACHE) {
struct r5conf *conf = rs->md.private;
/* convert from kiB to sectors */
conf ? conf->max_nr_stripes * 2 : 0);
}
- if (rs->print_flags & DMPF_REGION_SIZE)
+ if (rs->ctr_flags & CTR_FLAG_REGION_SIZE)
DMEMIT(" region_size %lu",
rs->md.bitmap_info.chunksize >> 9);
- if (rs->print_flags & DMPF_RAID10_COPIES)
+ if (rs->ctr_flags & CTR_FLAG_RAID10_COPIES)
DMEMIT(" raid10_copies %u",
raid10_md_layout_to_copies(rs->md.layout));
- if (rs->print_flags & DMPF_RAID10_FORMAT)
+ if (rs->ctr_flags & CTR_FLAG_RAID10_FORMAT)
DMEMIT(" raid10_format %s",
raid10_md_layout_to_format(rs->md.layout));