MIPS: SEAD3: Use register-bit-led driver via DT for LEDs
authorPaul Burton <paul.burton@imgtec.com>
Fri, 26 Aug 2016 14:17:41 +0000 (15:17 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Tue, 4 Oct 2016 23:31:20 +0000 (01:31 +0200)
Probe a driver for the PLED & FLED LEDs found on the SEAD3 board using
the register-bit-led driver via device tree, rather than a custom driver
via platform code. Enable support for the register-bit-led driver & its
prerequisite syscon in sead3_defconfig.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14054/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/boot/dts/mti/sead3.dts
arch/mips/configs/sead3_defconfig
arch/mips/mti-sead3/Makefile
arch/mips/mti-sead3/sead3-platform.c [deleted file]

index 8844cc0066769bdfff22b36a3b68e1804cb7cd22..0159450418edf8d3b7db8f531c9ff69672e8800c 100644 (file)
                };
        };
 
+       system-controller@1f000200 {
+               compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+               reg = <0x1f000200 0x300>;
+
+               led@10.0 {
+                       compatible = "register-bit-led";
+                       offset = <0x10>;
+                       mask = <0x1>;
+                       label = "pled0";
+               };
+               led@10.1 {
+                       compatible = "register-bit-led";
+                       offset = <0x10>;
+                       mask = <0x2>;
+                       label = "pled1";
+               };
+               led@10.2 {
+                       compatible = "register-bit-led";
+                       offset = <0x10>;
+                       mask = <0x4>;
+                       label = "pled2";
+               };
+               led@10.3 {
+                       compatible = "register-bit-led";
+                       offset = <0x10>;
+                       mask = <0x8>;
+                       label = "pled3";
+               };
+               led@10.4 {
+                       compatible = "register-bit-led";
+                       offset = <0x10>;
+                       mask = <0x10>;
+                       label = "pled4";
+               };
+               led@10.5 {
+                       compatible = "register-bit-led";
+                       offset = <0x10>;
+                       mask = <0x20>;
+                       label = "pled5";
+               };
+               led@10.6 {
+                       compatible = "register-bit-led";
+                       offset = <0x10>;
+                       mask = <0x40>;
+                       label = "pled6";
+               };
+               led@10.7 {
+                       compatible = "register-bit-led";
+                       offset = <0x10>;
+                       mask = <0x80>;
+                       label = "pled7";
+               };
+
+               led@18.0 {
+                       compatible = "register-bit-led";
+                       offset = <0x18>;
+                       mask = <0x1>;
+                       label = "fled0";
+               };
+               led@18.1 {
+                       compatible = "register-bit-led";
+                       offset = <0x18>;
+                       mask = <0x2>;
+                       label = "fled1";
+               };
+               led@18.2 {
+                       compatible = "register-bit-led";
+                       offset = <0x18>;
+                       mask = <0x4>;
+                       label = "fled2";
+               };
+               led@18.3 {
+                       compatible = "register-bit-led";
+                       offset = <0x18>;
+                       mask = <0x8>;
+                       label = "fled3";
+               };
+               led@18.4 {
+                       compatible = "register-bit-led";
+                       offset = <0x18>;
+                       mask = <0x10>;
+                       label = "fled4";
+               };
+               led@18.5 {
+                       compatible = "register-bit-led";
+                       offset = <0x18>;
+                       mask = <0x20>;
+                       label = "fled5";
+               };
+               led@18.6 {
+                       compatible = "register-bit-led";
+                       offset = <0x18>;
+                       mask = <0x40>;
+                       label = "fled6";
+               };
+               led@18.7 {
+                       compatible = "register-bit-led";
+                       offset = <0x18>;
+                       mask = <0x80>;
+                       label = "fled7";
+               };
+       };
+
        /* UART connected to FTDI & miniUSB socket */
        uart0: uart@1f000900 {
                compatible = "ns16550a";
index 23cce819d669c3fed5b9123b9f6f2d5318ba0374..e1c6582ac7108d6671d2eb60db8f37dd299200bf 100644 (file)
@@ -81,6 +81,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_SPI=y
 CONFIG_SENSORS_ADT7475=y
+CONFIG_MFD_SYSCON=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -95,6 +96,7 @@ CONFIG_MMC_DEBUG=y
 CONFIG_MMC_SPI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
index a58b6d9648464a5e0345ab2ed7bd065b2bd30018..04ea002f9df2690baca44b9a0024007354a6a6c5 100644 (file)
@@ -13,7 +13,6 @@ obj-y += sead3-display.o
 obj-y += sead3-dtshim.o
 obj-y += sead3-init.o
 obj-y += sead3-int.o
-obj-y += sead3-platform.o
 obj-y += sead3-reset.o
 obj-y += sead3-setup.o
 obj-y += sead3-time.o
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
deleted file mode 100644 (file)
index 5c1f42a..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#define LEDFLAGS(bits, shift)          \
-       ((bits << 8) | (shift << 8))
-
-#define LEDBITS(id, shift, bits)       \
-       .name = id #shift,              \
-       .flags = LEDFLAGS(bits, shift)
-
-static struct led_info led_data_info[] = {
-       { LEDBITS("bit", 0, 1) },
-       { LEDBITS("bit", 1, 1) },
-       { LEDBITS("bit", 2, 1) },
-       { LEDBITS("bit", 3, 1) },
-       { LEDBITS("bit", 4, 1) },
-       { LEDBITS("bit", 5, 1) },
-       { LEDBITS("bit", 6, 1) },
-       { LEDBITS("bit", 7, 1) },
-       { LEDBITS("all", 0, 8) },
-};
-
-static struct led_platform_data led_data = {
-       .num_leds       = ARRAY_SIZE(led_data_info),
-       .leds           = led_data_info
-};
-
-static struct resource pled_resources[] = {
-       {
-               .start  = 0x1f000210,
-               .end    = 0x1f000217,
-               .flags  = IORESOURCE_MEM
-       }
-};
-
-static struct platform_device pled_device = {
-       .name                   = "sead3::pled",
-       .id                     = 0,
-       .dev                    = {
-               .platform_data  = &led_data,
-       },
-       .num_resources          = ARRAY_SIZE(pled_resources),
-       .resource               = pled_resources
-};
-
-
-static struct resource fled_resources[] = {
-       {
-               .start                  = 0x1f000218,
-               .end                    = 0x1f00021f,
-               .flags                  = IORESOURCE_MEM
-       }
-};
-
-static struct platform_device fled_device = {
-       .name                   = "sead3::fled",
-       .id                     = 0,
-       .dev                    = {
-               .platform_data  = &led_data,
-       },
-       .num_resources          = ARRAY_SIZE(fled_resources),
-       .resource               = fled_resources
-};
-
-static struct platform_device sead3_led_device = {
-        .name   = "sead3-led",
-        .id     = -1,
-};
-
-static struct platform_device *sead3_platform_devices[] __initdata = {
-       &pled_device,
-       &fled_device,
-       &sead3_led_device,
-};
-
-static int __init sead3_platforms_device_init(void)
-{
-       return platform_add_devices(sead3_platform_devices,
-                                   ARRAY_SIZE(sead3_platform_devices));
-}
-
-device_initcall(sead3_platforms_device_init);