ASoC: Factor out I2C usage in WM8962 driver

The chip can actually support SPI so we shouldn't assume we've got an I2C
device even though that's the most common configuration.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index f90ae427242b4a26c87b9aff56fe23cc09303645..b0cb4368d1b4aca2d498f29d15d7c99b6a831b6a 100644 (file)
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -78,6 +78,8 @@ struct wm8962_priv {
 #ifdef CONFIG_GPIOLIB
        struct gpio_chip gpio_chip;
 #endif
+
+       int irq;
 };
 
 /* We can't use the same notifier block for more than one supply and
@@ -3731,8 +3733,6 @@ static int wm8962_probe(struct snd_soc_codec *codec)
        int ret;
        struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
        struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
-       struct i2c_client *i2c = container_of(codec->dev, struct i2c_client,
-                                             dev);
        u16 *reg_cache = codec->reg_cache;
        int i, trigger, irq_pol;
        bool dmicclk, dmicdat;
@@ -3899,7 +3899,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
        wm8962_init_beep(codec);
        wm8962_init_gpio(codec);
 
-       if (i2c->irq) {
+       if (wm8962->irq) {
                if (pdata && pdata->irq_active_low) {
                        trigger = IRQF_TRIGGER_LOW;
                        irq_pol = WM8962_IRQ_POL;
@@ -3911,12 +3911,13 @@ static int wm8962_probe(struct snd_soc_codec *codec)
                snd_soc_update_bits(codec, WM8962_INTERRUPT_CONTROL,
                                    WM8962_IRQ_POL, irq_pol);
 
-               ret = request_threaded_irq(i2c->irq, NULL, wm8962_irq,
+               ret = request_threaded_irq(wm8962->irq, NULL, wm8962_irq,
                                           trigger | IRQF_ONESHOT,
                                           "wm8962", codec);
                if (ret != 0) {
                        dev_err(codec->dev, "Failed to request IRQ %d: %d\n",
-                               i2c->irq, ret);
+                               wm8962->irq, ret);
+                       wm8962->irq = 0;
                        /* Non-fatal */
                } else {
                        /* Enable some IRQs by default */
@@ -3941,12 +3942,10 @@ err:
 static int wm8962_remove(struct snd_soc_codec *codec)
 {
        struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
-       struct i2c_client *i2c = container_of(codec->dev, struct i2c_client,
-                                             dev);
        int i;
 
-       if (i2c->irq)
-               free_irq(i2c->irq, codec);
+       if (wm8962->irq)
+               free_irq(wm8962->irq, codec);
 
        cancel_delayed_work_sync(&wm8962->mic_work);
 
@@ -3986,6 +3985,8 @@ static __devinit int wm8962_i2c_probe(struct i2c_client *i2c,
 
        i2c_set_clientdata(i2c, wm8962);
 
+       wm8962->irq = i2c->irq;
+
        ret = snd_soc_register_codec(&i2c->dev,
                                     &soc_codec_dev_wm8962, &wm8962_dai, 1);
        if (ret < 0)