power: supply: ltc2941-battery-gauge: Add vendor to compatibles in binding

The DT binding document for LTC2941 and LTC2943 battery gauges did not use
a vendor prefix in the listed compatible strings. The driver says that the
manufacturer is Linear Technology which is "lltc" in vendor-prefixes.txt.

There isn't an upstream Device Tree source file that has nodes defined for
these devices, so there's no need to keep the old compatible strings.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
index ea42ae12d92451579e0af57ee2bdfb886e60ad0a..a9d7aa60558b739ca312f86826b72cb247b111c0 100644 (file)
--- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt
+++ b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
@@ -6,8 +6,8 @@ temperature monitoring, and uses a slightly different conversion
 formula for the charge counter.
 
 Required properties:
-- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the
-    type of I2C chip attached.
+- compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also
+    indicates the type of I2C chip attached.
 - reg: The 7-bit I2C address.
 - lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
     negative value when the battery has been connected to the wrong end of the
@@ -20,7 +20,7 @@ Required properties:
 Example from the Topic Miami Florida board:
 
        fuelgauge: ltc2943@64 {
-               compatible = "ltc2943";
+               compatible = "lltc,ltc2943";
                reg = <0x64>;
                lltc,resistor-sense = <15>;
                lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */