[PATCH] parport: buffer overflow fix
authorMarko Kohtala <marko.kohtala@gmail.com>
Fri, 6 Jan 2006 08:19:43 +0000 (00:19 -0800)
committerLinus Torvalds <torvalds@g5.osdl.org>
Fri, 6 Jan 2006 16:33:56 +0000 (08:33 -0800)
Fix potential buffer overflow in case the device ID did not end in semicolon.
Also might fail to negotiate back to IEEE1284_MODE_COMPAT in case of failure.
parport_device_id did not return what Documentation/parport-lowlevel.txt said,
so I changed it to match it.

Determining device ID length is overly complicated, but Tim Waugh recalled on
linux-parport seeing some buggy device that might need it.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/parport/probe.c

index 4b48b31ec235ae16457ccc0b31678f502db8d493..5c29e8222211b75bc47d8c42e12bb55ad742e6c3 100644 (file)
@@ -128,8 +128,131 @@ static void parse_data(struct parport *port, int device, char *str)
        kfree(txt);
 }
 
+/* Read up to count-1 bytes of device id. Terminate buffer with
+ * '\0'. Buffer begins with two Device ID length bytes as given by
+ * device. */
+static ssize_t parport_read_device_id (struct parport *port, char *buffer,
+                                      size_t count)
+{
+       unsigned char length[2];
+       unsigned lelen, belen;
+       size_t idlens[4];
+       unsigned numidlens;
+       unsigned current_idlen;
+       ssize_t retval;
+       size_t len;
+
+       /* First two bytes are MSB,LSB of inclusive length. */
+       retval = parport_read (port, length, 2);
+
+       if (retval < 0)
+               return retval;
+       if (retval != 2)
+               return -EIO;
+
+       if (count < 2)
+               return 0;
+       memcpy(buffer, length, 2);
+       len = 2;
+
+       /* Some devices wrongly send LE length, and some send it two
+        * bytes short. Construct a sorted array of lengths to try. */
+       belen = (length[0] << 8) + length[1];
+       lelen = (length[1] << 8) + length[0];
+       idlens[0] = min(belen, lelen);
+       idlens[1] = idlens[0]+2;
+       if (belen != lelen) {
+               int off = 2;
+               /* Don't try lenghts of 0x100 and 0x200 as 1 and 2 */
+               if (idlens[0] <= 2)
+                       off = 0;
+               idlens[off] = max(belen, lelen);
+               idlens[off+1] = idlens[off]+2;
+               numidlens = off+2;
+       }
+       else {
+               /* Some devices don't truly implement Device ID, but
+                * just return constant nibble forever. This catches
+                * also those cases. */
+               if (idlens[0] == 0 || idlens[0] > 0xFFF) {
+                       printk (KERN_DEBUG "%s: reported broken Device ID"
+                               " length of %#zX bytes\n",
+                               port->name, idlens[0]);
+                       return -EIO;
+               }
+               numidlens = 2;
+       }
+
+       /* Try to respect the given ID length despite all the bugs in
+        * the ID length. Read according to shortest possible ID
+        * first. */
+       for (current_idlen = 0; current_idlen < numidlens; ++current_idlen) {
+               size_t idlen = idlens[current_idlen];
+               if (idlen+1 >= count)
+                       break;
+
+               retval = parport_read (port, buffer+len, idlen-len);
+
+               if (retval < 0)
+                       return retval;
+               len += retval;
+
+               if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
+                       if (belen != len) {
+                               printk (KERN_DEBUG "%s: Device ID was %d bytes"
+                                       " while device told it would be %d"
+                                       " bytes\n",
+                                       port->name, len, belen);
+                       }
+                       goto done;
+               }
+
+               /* This might end reading the Device ID too
+                * soon. Hopefully the needed fields were already in
+                * the first 256 bytes or so that we must have read so
+                * far. */
+               if (buffer[len-1] == ';') {
+                       printk (KERN_DEBUG "%s: Device ID reading stopped"
+                               " before device told data not available. "
+                               "Current idlen %d of %d, len bytes %02X %02X\n",
+                               port->name, current_idlen, numidlens,
+                               length[0], length[1]);
+                       goto done;
+               }
+       }
+       if (current_idlen < numidlens) {
+               /* Buffer not large enough, read to end of buffer. */
+               size_t idlen, len2;
+               if (len+1 < count) {
+                       retval = parport_read (port, buffer+len, count-len-1);
+                       if (retval < 0)
+                               return retval;
+                       len += retval;
+               }
+               /* Read the whole ID since some devices would not
+                * otherwise give back the Device ID from beginning
+                * next time when asked. */
+               idlen = idlens[current_idlen];
+               len2 = len;
+               while(len2 < idlen && retval > 0) {
+                       char tmp[4];
+                       retval = parport_read (port, tmp,
+                                              min(sizeof tmp, idlen-len2));
+                       if (retval < 0)
+                               return retval;
+                       len2 += retval;
+               }
+       }
+       /* In addition, there are broken devices out there that don't
+          even finish off with a semi-colon. We do not need to care
+          about those at this time. */
+ done:
+       buffer[len] = '\0';
+       return len;
+}
+
 /* Get Std 1284 Device ID. */
-ssize_t parport_device_id (int devnum, char *buffer, size_t len)
+ssize_t parport_device_id (int devnum, char *buffer, size_t count)
 {
        ssize_t retval = -ENXIO;
        struct pardevice *dev = parport_open (devnum, "Device ID probe",
@@ -139,76 +262,20 @@ ssize_t parport_device_id (int devnum, char *buffer, size_t len)
 
        parport_claim_or_block (dev);
 
-       /* Negotiate to compatibility mode, and then to device ID mode.
-        * (This is in case we are already in device ID mode.) */
+       /* Negotiate to compatibility mode, and then to device ID
+        * mode. (This so that we start form beginning of device ID if
+        * already in device ID mode.) */
        parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
        retval = parport_negotiate (dev->port,
                                    IEEE1284_MODE_NIBBLE | IEEE1284_DEVICEID);
 
        if (!retval) {
-               int idlen;
-               unsigned char length[2];
-
-               /* First two bytes are MSB,LSB of inclusive length. */
-               retval = parport_read (dev->port, length, 2);
-
-               if (retval != 2) goto end_id;
-
-               idlen = (length[0] << 8) + length[1] - 2;
-               /*
-                * Check if the caller-allocated buffer is large enough
-                * otherwise bail out or there will be an at least off by one.
-                */
-               if (idlen + 1 < len)
-                       len = idlen;
-               else {
-                       retval = -EINVAL;
-                       goto out;
-               }
-               retval = parport_read (dev->port, buffer, len);
-
-               if (retval != len)
-                       printk (KERN_DEBUG "%s: only read %Zd of %Zd ID bytes\n",
-                               dev->port->name, retval,
-                               len);
-
-               /* Some printer manufacturers mistakenly believe that
-                   the length field is supposed to be _exclusive_.
-                  In addition, there are broken devices out there
-                   that don't even finish off with a semi-colon. */
-               if (buffer[len - 1] != ';') {
-                       ssize_t diff;
-                       diff = parport_read (dev->port, buffer + len, 2);
-                       retval += diff;
-
-                       if (diff)
-                               printk (KERN_DEBUG
-                                       "%s: device reported incorrect "
-                                       "length field (%d, should be %Zd)\n",
-                                       dev->port->name, idlen, retval);
-                       else {
-                               /* One semi-colon short of a device ID. */
-                               buffer[len++] = ';';
-                               printk (KERN_DEBUG "%s: faking semi-colon\n",
-                                       dev->port->name);
-
-                               /* If we get here, I don't think we
-                                   need to worry about the possible
-                                   standard violation of having read
-                                   more than we were told to.  The
-                                   device is non-compliant anyhow. */
-                       }
-               }
-
-       end_id:
-               buffer[len] = '\0';
+               retval = parport_read_device_id (dev->port, buffer, count);
                parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
+               if (retval > 2)
+                       parse_data (dev->port, dev->daisy, buffer+2);
        }
 
-       if (retval > 2)
-               parse_data (dev->port, dev->daisy, buffer);
-
-out:
        parport_release (dev);
        parport_close (dev);
        return retval;