This ugly hack was long overdue to die.
It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels. These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.
The idea now is that we will increase NR_IRQS a little bit and use a
virtual<-->real IRQ number mapping scheme similar to PowerPC.
That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.
Signed-off-by: David S. Miller <davem@davemloft.net>
return 1 << irq_nr;
}
-static inline char *pcic_irq_itoa(unsigned int irq)
-{
- static char buff[16];
- sprintf(buff, "%d", irq);
- return buff;
-}
-
static void pcic_disable_irq(unsigned int irq_nr)
{
unsigned long mask, flags;
BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM);
- BTFIXUPSET_CALL(__irq_itoa, pcic_irq_itoa, BTFIXUPCALL_NORM);
}
int pcibios_assign_resource(struct pci_dev *pdev, int resource)
#endif
EXPORT_SYMBOL(BTFIXUP_CALL(enable_irq));
EXPORT_SYMBOL(BTFIXUP_CALL(disable_irq));
-EXPORT_SYMBOL(BTFIXUP_CALL(__irq_itoa));
EXPORT_SYMBOL(BTFIXUP_CALL(mmu_unlockarea));
EXPORT_SYMBOL(BTFIXUP_CALL(mmu_lockarea));
EXPORT_SYMBOL(BTFIXUP_CALL(mmu_get_scsi_sgl));
static void sun4c_nop(void) {}
#endif
-extern char *sun4m_irq_itoa(unsigned int irq);
-
void __init sun4c_init_IRQ(void)
{
struct linux_prom_registers int_regs[2];
BTFIXUPSET_CALL(clear_clock_irq, sun4c_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_profile_irq, sun4c_clear_profile_irq, BTFIXUPCALL_NOP);
BTFIXUPSET_CALL(load_profile_irq, sun4c_load_profile_irq, BTFIXUPCALL_NOP);
- BTFIXUPSET_CALL(__irq_itoa, sun4m_irq_itoa, BTFIXUPCALL_NORM);
sparc_init_timers = sun4c_init_timers;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4c_nop, BTFIXUPCALL_NOP);
}
}
-static char *sun4d_irq_itoa(unsigned int irq)
-{
- static char buff[16];
-
- if (irq < (1 << 5))
- sprintf(buff, "%d", irq);
- else
- sprintf(buff, "%d,%x", sbus_to_pil[(irq >> 2) & 7], irq);
- return buff;
-}
-
void __init sun4d_init_IRQ(void)
{
local_irq_disable();
BTFIXUPSET_CALL(clear_clock_irq, sun4d_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_profile_irq, sun4d_clear_profile_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4d_load_profile_irq, BTFIXUPCALL_NORM);
- BTFIXUPSET_CALL(__irq_itoa, sun4d_irq_itoa, BTFIXUPCALL_NORM);
sparc_init_timers = sun4d_init_timers;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4d_set_cpu_int, BTFIXUPCALL_NORM);
sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit;
}
-char *sun4m_irq_itoa(unsigned int irq)
-{
- static char buff[16];
- sprintf(buff, "%d", irq);
- return buff;
-}
-
static void __init sun4m_init_timers(irqreturn_t (*counter_fn)(int, void *, struct pt_regs *))
{
int reg_count, irq, cpu;
BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
- BTFIXUPSET_CALL(__irq_itoa, sun4m_irq_itoa, BTFIXUPCALL_NORM);
sparc_init_timers = sun4m_init_timers;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4m_send_ipi, BTFIXUPCALL_NORM);
static char*
fore200e_irq_itoa(int irq)
{
-#if defined(__sparc_v9__)
- return __irq_itoa(irq);
-#else
static char str[8];
sprintf(str, "%d", irq);
return str;
-#endif
}
* PCI Slot 2 INTA# (and some INTx# in Slot 1).
*/
if (request_irq(rtc_irq, rtc_interrupt, SA_SHIRQ, "rtc", (void *)&rtc_port)) {
- /*
- * Standard way for sparc to print irq's is to use
- * __irq_itoa(). I think for EBus it's ok to use %d.
- */
printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq);
return -EIO;
}
return;
}
- SOD(("SOC uses IRQ%s\n", __irq_itoa(irq)))
+ SOD(("SOC uses IRQ %d\n", irq))
s->port[0].fc.irq = irq;
s->port[1].fc.irq = irq;
return;
}
- SOD(("SOCAL uses IRQ %s\n", __irq_itoa(irq)))
+ SOD(("SOCAL uses IRQ %d\n", irq))
s->port[0].fc.irq = irq;
s->port[1].fc.irq = irq;
spin_unlock_irq(&ide_lock);
}
-#if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__)
+#if !defined(__mc68000__) && !defined(CONFIG_APUS)
printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET],
hwif->io_ports[IDE_DATA_OFFSET]+7,
hwif->io_ports[IDE_CONTROL_OFFSET], hwif->irq);
-#elif defined(__sparc__)
- printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %s", hwif->name,
- hwif->io_ports[IDE_DATA_OFFSET],
- hwif->io_ports[IDE_DATA_OFFSET]+7,
- hwif->io_ports[IDE_CONTROL_OFFSET], __irq_itoa(hwif->irq));
#else
printk("%s at 0x%08lx on irq %d", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET], hwif->irq);
goto out;
}
if (noisy)
-#ifdef __sparc__
- printk(KERN_INFO "%s: 100%% native mode on irq %s\n",
- d->name, __irq_itoa(pciirq));
-#else
printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
d->name, pciirq);
-#endif
}
/* FIXME: silent failure can happen */
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable);
buf = reg_read(ohci, OHCI1394_Version);
-#ifndef __sparc__
sprintf (irq_buf, "%d", ohci->dev->irq);
-#else
- sprintf (irq_buf, "%s", __irq_itoa(ohci->dev->irq));
-#endif
PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%s] "
"MMIO=[%lx-%lx] Max Packet=[%d] IR/IT contexts=[%d/%d]",
((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10),
/* Fix buggy cards with autoboot pin not tied low: */
reg_write(lynx, DMA0_CHAN_CTRL, 0);
-#ifndef __sparc__
sprintf (irq_buf, "%d", dev->irq);
-#else
- sprintf (irq_buf, "%s", __irq_itoa(dev->irq));
-#endif
if (!request_irq(dev->irq, lynx_irq_handler, SA_SHIRQ,
PCILYNX_DRIVER_NAME, lynx)) {
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
-#ifdef __sparc__
-#include <asm/irq.h> /* needed for __irq_itoa() proto */
-#endif
#include "mptbase.h"
r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc);
if (r < 0) {
-#ifndef __sparc__
printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %d!\n",
ioc->name, pdev->irq);
-#else
- printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %s!\n",
- ioc->name, __irq_itoa(pdev->irq));
-#endif
list_del(&ioc->list);
iounmap(mem);
kfree(ioc);
pci_set_master(pdev); /* ?? */
pci_set_drvdata(pdev, ioc);
-#ifndef __sparc__
dprintk((KERN_INFO MYNAM ": %s installed at interrupt %d\n", ioc->name, pdev->irq));
-#else
- dprintk((KERN_INFO MYNAM ": %s installed at interrupt %s\n", ioc->name, __irq_itoa(pdev->irq)));
-#endif
}
/* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
a[5], a[4], a[3], a[2], a[1], a[0]);
}
-#ifndef __sparc__
y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
-#else
- y += sprintf(buffer+len+y, ", IRQ=%s", __irq_itoa(ioc->pci_irq));
-#endif
if (!ioc->active)
y += sprintf(buffer+len+y, " (disabled)");
for (i = 0; i < 6; i++)
iowrite8(dev->dev_addr[i], ioaddr + i);
-#ifdef __sparc__
- if (print_info)
- printk(", IRQ %s\n", __irq_itoa(dev->irq));
-#else
if (print_info)
printk(", IRQ %d\n", dev->irq);
/* Tell them about an invalid IRQ. */
if (dev->irq <= 0 || dev->irq >= NR_IRQS)
printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n",
dev->irq);
-#endif
EL3WINDOW(4);
step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
}
printk("Gigabit Ethernet at 0x%08lx, ", dev->base_addr);
-#ifdef __sparc__
- printk("irq %s\n", __irq_itoa(pdev->irq));
-#else
- printk("irq %i\n", pdev->irq);
-#endif
+ printk("irq %d\n", pdev->irq);
#ifdef CONFIG_ACENIC_OMIT_TIGON_I
if ((readl(&ap->regs->HostCtrl) >> 28) == 4) {
if (request_irq(dev->irq, &happy_meal_interrupt,
SA_SHIRQ, dev->name, (void *)dev)) {
HMD(("EAGAIN\n"));
-#ifdef __sparc__
- printk(KERN_ERR "happy_meal(SBUS): Can't order irq %s to go.\n",
- __irq_itoa(dev->irq));
-#else
printk(KERN_ERR "happy_meal(SBUS): Can't order irq %d to go.\n",
dev->irq);
-#endif
return -EAGAIN;
}
if (request_irq(dev->irq, &lance_interrupt, SA_SHIRQ,
lancestr, (void *) dev)) {
- printk(KERN_ERR "Lance: Can't get irq %s\n", __irq_itoa(dev->irq));
+ printk(KERN_ERR "Lance: Can't get irq %d\n", dev->irq);
return -EAGAIN;
}
SA_SHIRQ,
WD_OBPNAME,
(void *)wd_dev.regs)) {
- printk("%s: Cannot register IRQ %s\n",
- WD_OBPNAME, __irq_itoa(wd_dev.irq));
+ printk("%s: Cannot register IRQ %d\n",
+ WD_OBPNAME, wd_dev.irq);
return(-EBUSY);
}
wd_dev.initialized = 1;
}
driver->regs->uctrl_intr = UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK;
- printk("uctrl: 0x%x (irq %s)\n", driver->regs, __irq_itoa(driver->irq));
+ printk("uctrl: 0x%x (irq %d)\n", driver->regs, driver->irq);
uctrl_get_event_status();
uctrl_get_external_status();
return 0;
return -1;
}
- printk("esp%d: IRQ %s ", esp->esp_id,
- __irq_itoa(esp->ehost->irq));
+ printk("esp%d: IRQ %d ", esp->esp_id,
+ esp->ehost->irq);
return 0;
}
SA_SHIRQ, "Qlogic/PTI", qpti))
goto fail;
- printk("qpti%d: IRQ %s ", qpti->qpti_id, __irq_itoa(qpti->irq));
+ printk("qpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
return 0;
static char buf[80];
struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
- sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %s regs at %p",
- __irq_itoa(qpti->qhost->irq), qpti->qregs);
+ sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %d regs at %p",
+ qpti->qhost->irq, qpti->qregs);
return buf;
}
#define NAME53C "sym53c"
#define NAME53C8XX "sym53c8xx"
-/* SPARC just has to be different ... */
-#ifdef __sparc__
-#define IRQ_FMT "%s"
-#define IRQ_PRM(x) __irq_itoa(x)
-#else
#define IRQ_FMT "%d"
#define IRQ_PRM(x) (x)
-#endif
struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP;
unsigned int sym_debug_flags = 0;
if (up->port.type == PORT_UNKNOWN)
return -1;
- printk(KERN_INFO "su%d at 0x%p (irq = %s) is a %s\n",
+ printk(KERN_INFO "su%d at 0x%p (irq = %d) is a %s\n",
channel,
- up->port.membase, __irq_itoa(up->port.irq),
+ up->port.membase, up->port.irq,
sunsu_type(&up->port));
#ifdef CONFIG_SERIO
up->cflag = B4800 | CS8 | CLOCAL | CREAD;
baud = 4800;
}
- printk(KERN_INFO "zs%d at 0x%p (irq = %s) is a SunZilog\n",
- channel, up->port.membase, __irq_itoa(zilog_irq));
+ printk(KERN_INFO "zs%d at 0x%p (irq = %d) is a SunZilog\n",
+ channel, up->port.membase, zilog_irq);
up->curregs[R15] = BRKIE;
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
/* enable irqs just before we start the controller */
if (hcd->driver->irq) {
- char buf[8], *bufp = buf;
-
-#ifdef __sparc__
- bufp = __irq_itoa(irqnum);
-#else
- sprintf(buf, "%d", irqnum);
-#endif
-
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
hcd->irq_descr, hcd)) != 0) {
dev_err(hcd->self.controller,
- "request interrupt %s failed\n", bufp);
+ "request interrupt %d failed\n", irqnum);
goto err_request_irq;
}
hcd->irq = irqnum;
- dev_info(hcd->self.controller, "irq %s, %s 0x%08llx\n", bufp,
+ dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
(hcd->driver->flags & HCD_MEMORY) ?
"io mem" : "io base",
(unsigned long long)hcd->rsrc_start);
unsigned long resource, len;
void __iomem *base = NULL;
int retval;
- char buf [8], *bufp;
/* if you want to support more than one controller in a system,
* usb_gadget_driver_{register,unregister}() must change.
pci_set_drvdata(pdev, dev);
INFO(dev, "%s\n", driver_desc);
INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr());
-#ifndef __sparc__
- scnprintf(buf, sizeof buf, "%d", pdev->irq);
- bufp = buf;
-#else
- bufp = __irq_itoa(pdev->irq);
-#endif
- INFO(dev, "irq %s, pci mem %p\n", bufp, base);
+ INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
/* init to known state, then setup irqs */
udc_reset(dev);
udc_reinit (dev);
if (request_irq(pdev->irq, goku_irq, SA_SHIRQ/*|SA_SAMPLE_RANDOM*/,
driver_name, dev) != 0) {
- DBG(dev, "request interrupt %s failed\n", bufp);
+ DBG(dev, "request interrupt %d failed\n", pdev->irq);
retval = -EBUSY;
goto done;
}
unsigned long resource, len;
void __iomem *base = NULL;
int retval, i;
- char buf [8], *bufp;
/* if you want to support more than one controller in a system,
* usb_gadget_driver_{register,unregister}() must change.
retval = -ENODEV;
goto done;
}
-#ifndef __sparc__
- scnprintf (buf, sizeof buf, "%d", pdev->irq);
- bufp = buf;
-#else
- bufp = __irq_itoa(pdev->irq);
-#endif
+
if (request_irq (pdev->irq, net2280_irq, SA_SHIRQ, driver_name, dev)
!= 0) {
- ERROR (dev, "request interrupt %s failed\n", bufp);
+ ERROR (dev, "request interrupt %d failed\n", pdev->irq);
retval = -EBUSY;
goto done;
}
/* done */
INFO (dev, "%s\n", driver_desc);
- INFO (dev, "irq %s, pci mem %p, chip rev %04x\n",
- bufp, base, dev->chiprev);
+ INFO (dev, "irq %d, pci mem %p, chip rev %04x\n",
+ pdev->irq, base, dev->chiprev);
INFO (dev, "version: " DRIVER_VERSION "; dma %s\n",
use_dma
? (use_dma_chaining ? "chaining" : "enabled")
#define __irq_ino(irq) irq
#define __irq_pil(irq) irq
-BTFIXUPDEF_CALL(char *, __irq_itoa, unsigned int)
-#define __irq_itoa(irq) BTFIXUP_CALL(__irq_itoa)(irq)
#define NR_IRQS 16
#define __bucket(irq) ((struct ino_bucket *)(unsigned long)(irq))
#define __irq(bucket) ((unsigned int)(unsigned long)(bucket))
-static __inline__ char *__irq_itoa(unsigned int irq)
-{
- static char buff[16];
-
- sprintf(buff, "%d,%x", __irq_pil(irq), (unsigned int)__irq_ino(irq));
- return buff;
-}
-
#define NR_IRQS 16
#define irq_canonicalize(irq) (irq)
if (request_irq(irq_prop->pri, snd_amd7930_interrupt,
SA_INTERRUPT | SA_SHIRQ, "amd7930", amd)) {
- snd_printk("amd7930-%d: Unable to grab IRQ %s\n",
+ snd_printk("amd7930-%d: Unable to grab IRQ %d\n",
dev,
- __irq_itoa(irq_prop->pri));
+ irq_prop->pri);
snd_amd7930_free(amd);
return -EBUSY;
}
strcpy(card->driver, "AMD7930");
strcpy(card->shortname, "Sun AMD7930");
- sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %s",
+ sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %d",
card->shortname,
rp->flags & 0xffL,
rp->start,
- __irq_itoa(irq_prop.pri));
+ irq_prop.pri);
if ((err = snd_amd7930_create(card, sdev, rp, reg_prop.reg_size,
&irq_prop, dev, &amd)) < 0)
if (request_irq(sdev->irqs[0], snd_cs4231_sbus_interrupt,
SA_SHIRQ, "cs4231", chip)) {
- snd_printdd("cs4231-%d: Unable to grab SBUS IRQ %s\n",
- dev,
- __irq_itoa(sdev->irqs[0]));
+ snd_printdd("cs4231-%d: Unable to grab SBUS IRQ %d\n",
+ dev, sdev->irqs[0]);
snd_cs4231_sbus_free(chip);
return -EBUSY;
}
if (err)
return err;
- sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %s",
+ sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %d",
card->shortname,
rp->flags & 0xffL,
rp->start,
- __irq_itoa(sdev->irqs[0]));
+ sdev->irqs[0]);
if ((err = snd_cs4231_sbus_create(card, sdev, dev, &cp)) < 0) {
snd_card_free(card);
if (err)
return err;
- sprintf(card->longname, "%s at 0x%lx, irq %s",
+ sprintf(card->longname, "%s at 0x%lx, irq %d",
card->shortname,
edev->resource[0].start,
- __irq_itoa(edev->irqs[0]));
+ edev->irqs[0]);
if ((err = snd_cs4231_ebus_create(card, edev, dev, &chip)) < 0) {
snd_card_free(card);
strcpy(card->driver, "DBRI");
strcpy(card->shortname, "Sun DBRI");
rp = &sdev->resource[0];
- sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %s",
+ sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %d",
card->shortname,
- rp->flags & 0xffL, rp->start, __irq_itoa(irq.pri));
+ rp->flags & 0xffL, rp->start, irq.pri);
if ((err = snd_dbri_create(card, sdev, &irq, dev)) < 0) {
snd_card_free(card);