if( VFL_TYPE_GRABBER == type ) {
vv->video_minor = vfd->minor;
INFO(("%s: registered device video%d [v4l2]\n",
- dev->name, vfd->minor & 0x1f));
+ dev->name, vfd->num));
} else {
vv->vbi_minor = vfd->minor;
INFO(("%s: registered device vbi%d [v4l2]\n",
- dev->name, vfd->minor & 0x1f));
+ dev->name, vfd->num));
}
*vid = vfd;
}
printk("video%d: Found M64278 VGA (IRQ %d, Freq %dMHz).\n",
- ar->vdev->minor, M32R_IRQ_INT3, freq);
+ ar->vdev->num, M32R_IRQ_INT3, freq);
return 0;
video_nr[btv->c.nr]) < 0)
goto err;
printk(KERN_INFO "bttv%d: registered device video%d\n",
- btv->c.nr,btv->video_dev->minor & 0x1f);
+ btv->c.nr, btv->video_dev->num);
if (device_create_file(&btv->video_dev->dev,
&dev_attr_card)<0) {
printk(KERN_ERR "bttv%d: device_create_file 'card' "
vbi_nr[btv->c.nr]) < 0)
goto err;
printk(KERN_INFO "bttv%d: registered device vbi%d\n",
- btv->c.nr,btv->vbi_dev->minor & 0x1f);
+ btv->c.nr, btv->vbi_dev->num);
if (!btv->has_radio)
return 0;
radio_nr[btv->c.nr]) < 0)
goto err;
printk(KERN_INFO "bttv%d: registered device radio%d\n",
- btv->c.nr,btv->radio_dev->minor & 0x1f);
+ btv->c.nr, btv->radio_dev->num);
/* all done */
return 0;
}
printk(KERN_INFO "video%d: Colour QuickCam found on %s\n",
- qcam->vdev.minor, qcam->pport->name);
+ qcam->vdev.num, qcam->pport->name);
qcams[num_cams++] = qcam;
if (!cafe_dfs_root)
return;
- sprintf(fname, "regs-%d", cam->v4ldev.minor);
+ sprintf(fname, "regs-%d", cam->v4ldev.num);
cam->dfs_regs = debugfs_create_file(fname, 0444, cafe_dfs_root,
cam, &cafe_dfs_reg_ops);
- sprintf(fname, "cam-%d", cam->v4ldev.minor);
+ sprintf(fname, "cam-%d", cam->v4ldev.num);
cam->dfs_cam_regs = debugfs_create_file(fname, 0444, cafe_dfs_root,
cam, &cafe_dfs_cam_ops);
}
if (!cpia_proc_root || !cam)
return;
- snprintf(name, sizeof(name), "video%d", cam->vdev.minor);
+ snprintf(name, sizeof(name), "video%d", cam->vdev.num);
ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root);
if (!ent)
if (!cam || !cam->proc_entry)
return;
- snprintf(name, sizeof(name), "video%d", cam->vdev.minor);
+ snprintf(name, sizeof(name), "video%d", cam->vdev.num);
remove_proc_entry(name, cpia_proc_root);
cam->proc_entry = NULL;
}
}
#ifdef CONFIG_PROC_FS
- DBG("destroying /proc/cpia/video%d\n", cam->vdev.minor);
+ DBG("destroying /proc/cpia/video%d\n", cam->vdev.num);
destroy_proc_cpia_cam(cam);
#endif
if (!cam->open_count) {
} else {
LOG("/dev/video%d removed while open, "
"deferring video_unregister_device\n",
- cam->vdev->minor);
+ cam->vdev->num);
}
}
cx23885_mc417_init(dev);
printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
- dev->name, dev->v4l_device->minor & 0x1f);
+ dev->name, dev->v4l_device->num);
return 0;
}
goto fail_unreg;
}
printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n",
- dev->name, dev->video_dev->minor & 0x1f);
+ dev->name, dev->video_dev->num);
/* initial device configuration */
mutex_lock(&dev->lock);
cx23885_set_tvnorm(dev, dev->tvnorm);
return err;
}
printk(KERN_INFO "%s/2: registered device video%d [mpeg]\n",
- dev->core->name,dev->mpeg_dev->minor & 0x1f);
+ dev->core->name, dev->mpeg_dev->num);
return 0;
}
goto fail_unreg;
}
printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n",
- core->name,dev->video_dev->minor & 0x1f);
+ core->name, dev->video_dev->num);
dev->vbi_dev = cx88_vdev_init(core,dev->pci,&cx8800_vbi_template,"vbi");
err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
goto fail_unreg;
}
printk(KERN_INFO "%s/0: registered device vbi%d\n",
- core->name,dev->vbi_dev->minor & 0x1f);
+ core->name, dev->vbi_dev->num);
if (core->board.radio.type == CX88_RADIO) {
dev->radio_dev = cx88_vdev_init(core,dev->pci,
goto fail_unreg;
}
printk(KERN_INFO "%s/0: registered device radio%d\n",
- core->name,dev->radio_dev->minor & 0x1f);
+ core->name, dev->radio_dev->num);
}
/* everything worked */
goto fail_unreg;
}
em28xx_info("Registered radio device as /dev/radio%d\n",
- dev->radio_dev->minor & 0x1f);
+ dev->radio_dev->num);
}
/* init video dma queues */
cam->state |= DEV_MISCONFIGURED;
DBG(1, "URB timeout reached. The camera is misconfigured. To "
"use it, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -EIO;
}
cam = container_of(kref, struct et61x251_device, kref);
- DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+ DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
usb_put_dev(cam->usbdev);
if (cam->users) {
DBG(2, "Device /dev/video%d is already in use",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
DBG(3, "Simultaneous opens are not supported");
if ((filp->f_flags & O_NONBLOCK) ||
(filp->f_flags & O_NDELAY)) {
cam->frame_count = 0;
et61x251_empty_framequeues(cam);
- DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+ DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
out:
mutex_unlock(&cam->open_mutex);
cam->users--;
wake_up_interruptible_nr(&cam->wait_open, 1);
- DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+ DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
kref_put(&cam->kref, et61x251_release_resources);
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -EIO;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -ENOMEM;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -EIO;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -ENOMEM;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
"problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor);
+ "/dev/video%d again.", cam->v4ldev->num);
return -EIO;
}
goto fail;
}
- DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+ DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
cam->module_param.force_munmap = force_munmap[dev_nr];
cam->module_param.frame_timeout = frame_timeout[dev_nr];
if (cam->users) {
DBG(2, "Device /dev/video%d is open! Deregistration and "
"memory deallocation are deferred.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
cam->state |= DEV_MISCONFIGURED;
et61x251_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip)
{
- int minor_id = dip->devbase.minor;
+ int num = dip->devbase.num;
struct pvr2_hdw *hdw = dip->v4lp->channel.mc_head->hdw;
enum pvr2_config cfg = dip->config;
int v4l_type = dip->v4l_type;
video_unregister_device(&dip->devbase);
printk(KERN_INFO "pvrusb2: unregistered device %s%u [%s]\n",
- get_v4l_name(v4l_type),minor_id & 0x1f,
+ get_v4l_name(v4l_type), num,
pvr2_config_get_name(cfg));
}
}
printk(KERN_INFO "pvrusb2: registered device %s%u [%s]\n",
- get_v4l_name(dip->v4l_type),dip->devbase.minor & 0x1f,
+ get_v4l_name(dip->v4l_type), dip->devbase.num,
pvr2_config_get_name(dip->config));
pvr2_hdw_v4l_store_minor_number(vp->channel.mc_head->hdw,
goto err;
}
else {
- PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F);
+ PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->num);
}
/* occupy slot */
goto fail4;
}
printk(KERN_INFO "%s: registered device video%d [v4l2]\n",
- dev->name,dev->video_dev->minor & 0x1f);
+ dev->name, dev->video_dev->num);
dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
if (err < 0)
goto fail4;
printk(KERN_INFO "%s: registered device vbi%d\n",
- dev->name,dev->vbi_dev->minor & 0x1f);
+ dev->name, dev->vbi_dev->num);
if (card_has_radio(dev)) {
dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio");
if (err < 0)
goto fail4;
printk(KERN_INFO "%s: registered device radio%d\n",
- dev->name,dev->radio_dev->minor & 0x1f);
+ dev->name, dev->radio_dev->num);
}
/* everything worked */
return err;
}
printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
- dev->name,dev->empress_dev->minor & 0x1f);
+ dev->name, dev->empress_dev->num);
videobuf_queue_sg_init(&dev->empress_tsq, &saa7134_ts_qops,
&dev->pci->dev, &dev->slock,
return -EIO;
}
dev_info(&intf->dev, "registered new video device: video%d\n",
- se401->vdev.minor);
+ se401->vdev.num);
usb_set_intfdata (intf, se401);
return 0;
cam->state |= DEV_MISCONFIGURED;
DBG(1, "URB timeout reached. The camera is misconfigured. "
"To use it, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -EIO;
}
cam = container_of(kref, struct sn9c102_device, kref);
- DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+ DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
usb_put_dev(cam->usbdev);
if (cam->users) {
DBG(2, "Device /dev/video%d is already in use",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
DBG(3, "Simultaneous opens are not supported");
/*
open() must follow the open flags and should block
cam->frame_count = 0;
sn9c102_empty_framequeues(cam);
- DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+ DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
out:
mutex_unlock(&cam->open_mutex);
cam->users--;
wake_up_interruptible_nr(&cam->wait_open, 1);
- DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+ DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
kref_put(&cam->kref, sn9c102_release_resources);
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -EIO;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -ENOMEM;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -EIO;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -ENOMEM;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
"problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor);
+ "/dev/video%d again.", cam->v4ldev->num);
return -EIO;
}
goto fail;
}
- DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+ DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
video_set_drvdata(cam->v4ldev, cam);
cam->module_param.force_munmap = force_munmap[dev_nr];
if (cam->users) {
DBG(2, "Device /dev/video%d is open! Deregistration and "
"memory deallocation are deferred.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
cam->state |= DEV_MISCONFIGURED;
sn9c102_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
STK_ERROR("v4l registration failed\n");
else
STK_INFO("Syntek USB2.0 Camera is now controlling video device"
- " /dev/video%d\n", dev->vdev.minor);
+ " /dev/video%d\n", dev->vdev.num);
return err;
}
stk_remove_sysfs_files(&dev->vdev);
STK_INFO("Syntek USB2.0 Camera release resources "
- "video device /dev/video%d\n", dev->vdev.minor);
+ "video device /dev/video%d\n", dev->vdev.num);
video_unregister_device(&dev->vdev);
}
retval = -EIO;
goto error_vdev;
}
- PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor);
+ PDEBUG(0, "STV(i): registered new video device: video%d",
+ stv680->vdev->num);
usb_set_intfdata (intf, stv680);
retval = stv680_create_sysfs_files(stv680->vdev);
dev_info(&uvd->dev->dev, "%s on /dev/video%d: canvas=%s videosize=%s\n",
(uvd->handle != NULL) ? uvd->handle->drvName : "???",
- uvd->vdev.minor, tmp2, tmp1);
+ uvd->vdev.num, tmp2, tmp1);
usb_get_dev(uvd->dev);
return 0;
return -EIO;
}
- printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor);
+ printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",
+ cam->vdev.num);
usb_set_intfdata (intf, cam);
sizeof(struct i2c_client));
sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name),
- " #%d", usbvision->vdev->minor & 0x1f);
+ " #%d", usbvision->vdev->num);
PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name);
usbvision->i2c_adap.dev.parent = &usbvision->dev->dev;
// vbi Device:
if (usbvision->vbi) {
PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]",
- usbvision->vbi->minor & 0x1f);
+ usbvision->vbi->num);
if (usbvision->vbi->minor != -1) {
video_unregister_device(usbvision->vbi);
} else {
// Radio Device:
if (usbvision->rdev) {
PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]",
- usbvision->rdev->minor & 0x1f);
+ usbvision->rdev->num);
if (usbvision->rdev->minor != -1) {
video_unregister_device(usbvision->rdev);
} else {
// Video Device:
if (usbvision->vdev) {
PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]",
- usbvision->vdev->minor & 0x1f);
+ usbvision->vdev->num);
if (usbvision->vdev->minor != -1) {
video_unregister_device(usbvision->vdev);
} else {
goto err_exit;
}
printk(KERN_INFO "USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]\n",
- usbvision->nr,usbvision->vdev->minor & 0x1f);
+ usbvision->nr, usbvision->vdev->num);
// Radio Device:
if (usbvision_device_data[usbvision->DevModel].Radio) {
goto err_exit;
}
printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]\n",
- usbvision->nr, usbvision->rdev->minor & 0x1f);
+ usbvision->nr, usbvision->rdev->num);
}
// vbi Device:
if (usbvision_device_data[usbvision->DevModel].vbi) {
goto err_exit;
}
printk(KERN_INFO "USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)\n",
- usbvision->nr,usbvision->vbi->minor & 0x1f);
+ usbvision->nr, usbvision->vbi->num);
}
// all done
return 0;
if (-1 != dev->vfd->minor) {
printk(KERN_INFO "%s: unregistering /dev/video%d\n",
- VIVI_MODULE_NAME, dev->vfd->minor);
+ VIVI_MODULE_NAME, dev->vfd->num);
video_unregister_device(dev->vfd);
} else {
printk(KERN_INFO "%s: releasing /dev/video%d\n",
- VIVI_MODULE_NAME, dev->vfd->minor);
+ VIVI_MODULE_NAME, dev->vfd->num);
video_device_release(dev->vfd);
}
dev->vfd = vfd;
printk(KERN_INFO "%s: V4L2 device registered as /dev/video%d\n",
- VIVI_MODULE_NAME, vfd->minor);
+ VIVI_MODULE_NAME, vfd->num);
}
if (ret < 0) {
cam->sensor = CC_UNKNOWN;
DBG(1, "Image sensor initialization failed for %s (/dev/video%d). "
"Try to detach and attach this device again",
- symbolic(camlist, cam->id), cam->v4ldev->minor)
+ symbolic(camlist, cam->id), cam->v4ldev->num)
return err;
}
{
mutex_lock(&w9968cf_devlist_mutex);
- DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor)
+ DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->num)
video_unregister_device(cam->v4ldev);
list_del(&cam->v4llist);
DBG(2, "No supported image sensor has been detected by the "
"'ovcamchip' module for the %s (/dev/video%d). Make "
"sure it is loaded *before* (re)connecting the camera.",
- symbolic(camlist, cam->id), cam->v4ldev->minor)
+ symbolic(camlist, cam->id), cam->v4ldev->num)
mutex_unlock(&cam->dev_mutex);
up_read(&w9968cf_disconnect);
return -ENODEV;
if (cam->users) {
DBG(2, "%s (/dev/video%d) has been already occupied by '%s'",
- symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command)
+ symbolic(camlist, cam->id), cam->v4ldev->num, cam->command)
if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) {
mutex_unlock(&cam->dev_mutex);
up_read(&w9968cf_disconnect);
}
DBG(5, "Opening '%s', /dev/video%d ...",
- symbolic(camlist, cam->id), cam->v4ldev->minor)
+ symbolic(camlist, cam->id), cam->v4ldev->num)
cam->streaming = 0;
cam->misconfigured = 0;
.minheight = cam->minheight,
};
sprintf(cap.name, "W996[87]CF USB Camera #%d",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
cap.maxwidth = (cam->upscaling && w9968cf_vpp)
? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
: cam->maxwidth;
goto fail;
}
- DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor)
+ DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->num)
/* Set some basic constants */
w9968cf_configure_camera(cam, udev, mod_id, dev_nr);
DBG(2, "The device is open (/dev/video%d)! "
"Process name: %s. Deregistration and memory "
"deallocation are deferred on close.",
- cam->v4ldev->minor, cam->command)
+ cam->v4ldev->num, cam->command)
cam->misconfigured = 1;
w9968cf_stop_transfer(cam);
wake_up_interruptible(&cam->wait_queue);
cam->state |= DEV_MISCONFIGURED;
DBG(1, "URB timeout reached. The camera is misconfigured. To "
"use it, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -EIO;
}
{
struct zc0301_device *cam = container_of(kref, struct zc0301_device,
kref);
- DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+ DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
usb_put_dev(cam->usbdev);
}
if (cam->users) {
- DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+ DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->num);
DBG(3, "Simultaneous opens are not supported");
if ((filp->f_flags & O_NONBLOCK) ||
(filp->f_flags & O_NDELAY)) {
cam->frame_count = 0;
zc0301_empty_framequeues(cam);
- DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+ DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
out:
mutex_unlock(&cam->open_mutex);
cam->users--;
wake_up_interruptible_nr(&cam->wait_open, 1);
- DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+ DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
kref_put(&cam->kref, zc0301_release_resources);
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -EIO;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -ENOMEM;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -EIO;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
"use the camera, close and open /dev/video%d again.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
return -ENOMEM;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
"problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor);
+ "/dev/video%d again.", cam->v4ldev->num);
return -EIO;
}
goto fail;
}
- DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+ DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
cam->module_param.force_munmap = force_munmap[dev_nr];
cam->module_param.frame_timeout = frame_timeout[dev_nr];
if (cam->users) {
DBG(2, "Device /dev/video%d is open! Deregistration and "
"memory deallocation are deferred.",
- cam->v4ldev->minor);
+ cam->v4ldev->num);
cam->state |= DEV_MISCONFIGURED;
zc0301_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
usb_set_intfdata(intf, cam);
dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n",
- cam->vdev->minor);
+ cam->vdev->num);
return 0;
}