[PATCH] scsi: remove meaningless scsi_cmnd->serial_number_at_timeout field
author <htejun@gmail.com> <>
Sun, 3 Apr 2005 19:59:11 +0000 (14:59 -0500)
committerJames Bottomley <jejb@titanic>
Mon, 18 Apr 2005 17:33:15 +0000 (12:33 -0500)
scsi_cmnd->serial_number_at_timeout doesn't serve any purpose
anymore.  All serial_number == serial_number_at_timeout tests
are always true in abort callbacks.  Kill the field.  Also, as
->pid always equals ->serial_number and ->serial_number
doesn't have any special meaning anymore, update comments
above ->serial_number accordingly.  Once we remove all uses of
this field from all lldd's, this field should go.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/BusLogic.c
drivers/scsi/advansys.c
drivers/scsi/ips.c
drivers/scsi/ncr53c8xx.c
drivers/scsi/qla2xxx/qla_dbg.c
drivers/scsi/scsi.c
drivers/scsi/scsi_error.c
drivers/scsi/scsi_lib.c
drivers/scsi/sym53c8xx_2/sym_glue.c
include/scsi/scsi_cmnd.h

index 41b5197ce4e6c01cb5de40f8482fb47f43aaa376..15e4b122d56e93c4330fbbfd1871e6d2c164b7a0 100644 (file)
@@ -2957,13 +2957,6 @@ static int BusLogic_AbortCommand(struct scsi_cmnd *Command)
        int TargetID = Command->device->id;
        struct BusLogic_CCB *CCB;
        BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsRequested);
-       /*
-          If this Command has already completed, then no Abort is necessary.
-        */
-       if (Command->serial_number != Command->serial_number_at_timeout) {
-               BusLogic_Warning("Unable to Abort Command to Target %d - " "Already Completed\n", HostAdapter, TargetID);
-               return SUCCESS;
-       }
        /*
           Attempt to find an Active CCB for this Command.  If no Active CCB for this
           Command is found, then no Abort is necessary.
index edeb333d816172e8779244084257ccfecc323c56..04cb5c405a2db94a232f7621c2e09f1f5599cd14 100644 (file)
@@ -9198,9 +9198,8 @@ asc_prt_scsi_cmnd(struct scsi_cmnd *s)
         s->use_sg, s->sglist_len, s->abort_reason);
 
     printk(
-" serial_number 0x%x, serial_number_at_timeout 0x%x, retries %d, allowed %d\n",
-        (unsigned) s->serial_number, (unsigned) s->serial_number_at_timeout,
-         s->retries, s->allowed);
+" serial_number 0x%x, retries %d, allowed %d\n",
+        (unsigned) s->serial_number, s->retries, s->allowed);
 
     printk(
 " timeout_per_command %d, timeout_total %d, timeout %d\n",
index e46096da8db2d96b8dffff85f174964416d6d0a5..47c263e5cd39d355e15b061d6564cd131b47c249 100644 (file)
@@ -833,13 +833,6 @@ ips_eh_abort(Scsi_Cmnd * SC)
        if (!ha->active)
                return (FAILED);
 
-       if (SC->serial_number != SC->serial_number_at_timeout) {
-               /* HMM, looks like a bogus command */
-               DEBUG(1, "Abort called with bogus scsi command");
-
-               return (FAILED);
-       }
-
        /* See if the command is on the copp queue */
        item = ha->copp_waitlist.head;
        while ((item) && (item->scsi_cmd != SC))
index 7ae13236788ec961c80720654ed9b9d6e0f2b236..2a0e42ec27d3e8bc5a66baf424f990516632a0e4 100644 (file)
@@ -7486,24 +7486,14 @@ static int ncr53c8xx_abort(struct scsi_cmnd *cmd)
        struct scsi_cmnd *done_list;
 
 #if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
-       printk("ncr53c8xx_abort: pid=%lu serial_number=%ld serial_number_at_timeout=%ld\n",
-               cmd->pid, cmd->serial_number, cmd->serial_number_at_timeout);
+       printk("ncr53c8xx_abort: pid=%lu serial_number=%ld\n",
+               cmd->pid, cmd->serial_number);
 #else
        printk("ncr53c8xx_abort: command pid %lu\n", cmd->pid);
 #endif
 
        NCR_LOCK_NCB(np, flags);
 
-#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
-       /*
-        * We have to just ignore abort requests in some situations.
-        */
-       if (cmd->serial_number != cmd->serial_number_at_timeout) {
-               sts = SCSI_ABORT_NOT_RUNNING;
-               goto out;
-       }
-#endif
-
        sts = ncr_abort_command(np, cmd);
 out:
        done_list     = np->done_list;
index dcc33daa5913dbd558d3f3178ae9868698561337..0e8ebbc56e81c67affd7a6f996490db57cf33cd0 100644 (file)
@@ -1050,10 +1050,8 @@ qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd)
        for (i = 0; i < cmd->cmd_len; i++) {
                printk("0x%02x ", cmd->cmnd[i]);
        }
-       printk("\n  seg_cnt=%d, allowed=%d, retries=%d, "
-           "serial_number_at_timeout=0x%lx\n",
-           cmd->use_sg, cmd->allowed, cmd->retries,
-           cmd->serial_number_at_timeout);
+       printk("\n  seg_cnt=%d, allowed=%d, retries=%d\n",
+           cmd->use_sg, cmd->allowed, cmd->retries);
        printk("  request buffer=0x%p, request buffer len=0x%x\n",
            cmd->request_buffer, cmd->request_bufflen);
        printk("  tag=%d, transfersize=0x%x\n",
index 95de4d0f4fd1613c1ec16895bce5c8039459074c..05d2bd075fd4e27a6f954e2b0662c400733790f9 100644 (file)
@@ -686,7 +686,6 @@ void scsi_init_cmd_from_req(struct scsi_cmnd *cmd, struct scsi_request *sreq)
        cmd->request = sreq->sr_request;
        memcpy(cmd->data_cmnd, sreq->sr_cmnd, sizeof(cmd->data_cmnd));
        cmd->serial_number = 0;
-       cmd->serial_number_at_timeout = 0;
        cmd->bufflen = sreq->sr_bufflen;
        cmd->buffer = sreq->sr_buffer;
        cmd->retries = 0;
@@ -765,7 +764,6 @@ void __scsi_done(struct scsi_cmnd *cmd)
         * Set the serial numbers back to zero
         */
        cmd->serial_number = 0;
-       cmd->serial_number_at_timeout = 0;
        cmd->state = SCSI_STATE_BHQUEUE;
        cmd->owner = SCSI_OWNER_BH_HANDLER;
 
index 173abb88e3e8f8414daf6e5ff97a3a34060c77ec..13bac93fc3971260b5fd47f19cfd478285d35c31 100644 (file)
@@ -79,11 +79,6 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag)
         */
        scmd->owner = SCSI_OWNER_ERROR_HANDLER;
        scmd->state = SCSI_STATE_FAILED;
-       /*
-        * Set the serial_number_at_timeout to the current
-        * serial_number
-        */
-       scmd->serial_number_at_timeout = scmd->serial_number;
        list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
        set_bit(SHOST_RECOVERY, &shost->shost_state);
        shost->host_failed++;
@@ -1061,7 +1056,6 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
        SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
                                          __FUNCTION__));
        scmd->owner = SCSI_OWNER_LOWLEVEL;
-       scmd->serial_number_at_timeout = scmd->serial_number;
 
        if (!scmd->device->host->hostt->eh_bus_reset_handler)
                return FAILED;
@@ -1093,7 +1087,6 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd)
        SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
                                          __FUNCTION__));
        scmd->owner = SCSI_OWNER_LOWLEVEL;
-       scmd->serial_number_at_timeout = scmd->serial_number;
 
        if (!scmd->device->host->hostt->eh_host_reset_handler)
                return FAILED;
index 19dd911d9f7ad27cb45b642a325f0981a73178f0..619d3fb7a2f056bdfdde5f103d618a2b566fb949 100644 (file)
@@ -298,7 +298,6 @@ static int scsi_init_cmd_errh(struct scsi_cmnd *cmd)
 {
        cmd->owner = SCSI_OWNER_MIDLEVEL;
        cmd->serial_number = 0;
-       cmd->serial_number_at_timeout = 0;
        cmd->abort_reason = 0;
 
        memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer);
index a1dff6d437bc22b066a123e2332526fdb7cc4d13..5ff83d214f128eed2ca780cf50fbc8f12a6fa07e 100644 (file)
@@ -799,12 +799,6 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
 
        dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname);
 
-#if 0
-       /* This one should be the result of some race, thus to ignore */
-       if (cmd->serial_number != cmd->serial_number_at_timeout)
-               goto prepare;
-#endif
-
        /* This one is queued in some place -> to wait for completion */
        FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
                struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
index ae45d6f8f98cb39c111956ceb4de4730cace92df..07f5c699eaa7b365468150dc81bb0ce7bf05b46f 100644 (file)
@@ -43,21 +43,17 @@ struct scsi_cmnd {
        void (*done) (struct scsi_cmnd *);      /* Mid-level done function */
 
        /*
-        * A SCSI Command is assigned a nonzero serial_number when internal_cmnd
-        * passes it to the driver's queue command function.  The serial_number
-        * is cleared when scsi_done is entered indicating that the command has
-        * been completed.  If a timeout occurs, the serial number at the moment
-        * of timeout is copied into serial_number_at_timeout.  By subsequently
-        * comparing the serial_number and serial_number_at_timeout fields
-        * during abort or reset processing, we can detect whether the command
-        * has already completed.  This also detects cases where the command has
-        * completed and the SCSI Command structure has already being reused
-        * for another command, so that we can avoid incorrectly aborting or
-        * resetting the new command.
-        * The serial number is only unique per host.
+        * A SCSI Command is assigned a nonzero serial_number before passed
+        * to the driver's queue command function.  The serial_number is
+        * cleared when scsi_done is entered indicating that the command
+        * has been completed.  It currently doesn't have much use other
+        * than printk's.  Some lldd's use this number for other purposes.
+        * It's almost certain that such usages are either incorrect or
+        * meaningless.  Please kill all usages other than printk's.  Also,
+        * as this number is always identical to ->pid, please convert
+        * printk's to use ->pid, so that we can kill this field.
         */
        unsigned long serial_number;
-       unsigned long serial_number_at_timeout;
 
        int retries;
        int allowed;