static unsigned long get_uart_rate(struct clk *clk);
static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
-
+static int set_div_rate(struct clk *clk, unsigned long rate);
static struct clk clk_uart1 = {
.sw_locked = 1,
.rate = EP93XX_EXT_CLK_RATE,
};
+static struct clk clk_video = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_VIDCLKDIV,
+ .enable_mask = EP93XX_SYSCON_CLKDIV_ENABLE,
+ .set_rate = set_div_rate,
+};
+
/* DMA Clocks */
static struct clk clk_m2p0 = {
.enable_reg = EP93XX_SYSCON_PWRCNT,
INIT_CK(NULL, "pll2", &clk_pll2),
INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
INIT_CK("ep93xx-keypad", NULL, &clk_keypad),
+ INIT_CK("ep93xx-fb", NULL, &clk_video),
INIT_CK(NULL, "pwm_clk", &clk_pwm),
INIT_CK(NULL, "m2p0", &clk_m2p0),
INIT_CK(NULL, "m2p1", &clk_m2p1),
return 0;
}
+static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
+ int *pdiv, int *div)
+{
+ unsigned long max_rate, best_rate = 0,
+ actual_rate = 0, mclk_rate = 0, rate_err = -1;
+ int i, found = 0, __div = 0, __pdiv = 0;
+
+ /* Don't exceed the maximum rate */
+ max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
+ (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+ rate = min(rate, max_rate);
+
+ /*
+ * Try the two pll's and the external clock
+ * Because the valid predividers are 2, 2.5 and 3, we multiply
+ * all the clocks by 2 to avoid floating point math.
+ *
+ * This is based on the algorithm in the ep93xx raster guide:
+ * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
+ *
+ */
+ for (i = 0; i < 3; i++) {
+ if (i == 0)
+ mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+ else if (i == 1)
+ mclk_rate = clk_pll1.rate * 2;
+ else if (i == 2)
+ mclk_rate = clk_pll2.rate * 2;
+
+ /* Try each predivider value */
+ for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
+ __div = mclk_rate / (rate * __pdiv);
+ if (__div < 2 || __div > 127)
+ continue;
+
+ actual_rate = mclk_rate / (__pdiv * __div);
+
+ if (!found || abs(actual_rate - rate) < rate_err) {
+ *pdiv = __pdiv - 3;
+ *div = __div;
+ *psel = (i == 2);
+ *esel = (i != 0);
+ best_rate = actual_rate;
+ rate_err = abs(actual_rate - rate);
+ found = 1;
+ }
+ }
+ }
+
+ if (!found)
+ return 0;
+
+ return best_rate;
+}
+
+static int set_div_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long actual_rate;
+ int psel = 0, esel = 0, pdiv = 0, div = 0;
+ u32 val;
+
+ actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
+ if (actual_rate == 0)
+ return -EINVAL;
+ clk->rate = actual_rate;
+
+ /* Clear the esel, psel, pdiv and div bits */
+ val = __raw_readl(clk->enable_reg);
+ val &= ~0x7fff;
+
+ /* Set the new esel, psel, pdiv and div bits for the new clock rate */
+ val |= (esel ? EP93XX_SYSCON_CLKDIV_ESEL : 0) |
+ (psel ? EP93XX_SYSCON_CLKDIV_PSEL : 0) |
+ (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
+ ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+ return 0;
+}
+
int clk_set_rate(struct clk *clk, unsigned long rate)
{
if (clk->set_rate)
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
+#include <mach/fb.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+/*************************************************************************
+ * EP93xx video peripheral handling
+ *************************************************************************/
+static struct ep93xxfb_mach_info ep93xxfb_data;
+
+static struct resource ep93xx_fb_resource[] = {
+ {
+ .start = EP93XX_RASTER_PHYS_BASE,
+ .end = EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ep93xx_fb_device = {
+ .name = "ep93xx-fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xxfb_data,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask,
+ },
+ .num_resources = ARRAY_SIZE(ep93xx_fb_resource),
+ .resource = ep93xx_fb_resource,
+};
+
+void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
+{
+ ep93xxfb_data = *data;
+ platform_device_register(&ep93xx_fb_device);
+}
+
extern void ep93xx_gpio_init(void);
void __init ep93xx_init_devices(void)
#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
+#define EP93XX_RASTER_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00030000)
#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2)
#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1)
#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0)
+#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84)
+#define EP93XX_SYSCON_CLKDIV_ENABLE (1<<15)
+#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14)
+#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13)
+#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8
#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90)
#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31)
#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
--- /dev/null
+/*
+ * arch/arm/mach-ep93xx/include/mach/fb.h
+ */
+
+#ifndef __ASM_ARCH_EP93XXFB_H
+#define __ASM_ARCH_EP93XXFB_H
+
+struct platform_device;
+struct fb_videomode;
+struct fb_info;
+
+#define EP93XXFB_USE_MODEDB 0
+
+/* VideoAttributes flags */
+#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0)
+#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1)
+#define EP93XXFB_VSYNC_ENABLE (1 << 2)
+#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3)
+#define EP93XXFB_COMPOSITE_SYNC (1 << 4)
+#define EP93XXFB_SYNC_VERT_HIGH (1 << 5)
+#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6)
+#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7)
+#define EP93XXFB_PCLK_FALLING (1 << 8)
+#define EP93XXFB_ENABLE_AC (1 << 9)
+#define EP93XXFB_ENABLE_LCD (1 << 10)
+#define EP93XXFB_ENABLE_CCIR (1 << 12)
+#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13)
+#define EP93XXFB_ENABLE_INTERRUPT (1 << 14)
+#define EP93XXFB_USB_INTERLACE (1 << 16)
+#define EP93XXFB_USE_EQUALIZATION (1 << 17)
+#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18)
+#define EP93XXFB_USE_DOUBLE_VERT (1 << 19)
+#define EP93XXFB_USE_BLANK_PIXEL (1 << 20)
+#define EP93XXFB_USE_SDCSN0 (0 << 21)
+#define EP93XXFB_USE_SDCSN1 (1 << 21)
+#define EP93XXFB_USE_SDCSN2 (2 << 21)
+#define EP93XXFB_USE_SDCSN3 (3 << 21)
+
+#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \
+ EP93XXFB_PIXEL_CLOCK_ENABLE | \
+ EP93XXFB_VSYNC_ENABLE | \
+ EP93XXFB_PIXEL_DATA_ENABLE)
+
+struct ep93xxfb_mach_info {
+ unsigned int num_modes;
+ const struct fb_videomode *modes;
+ const struct fb_videomode *default_mode;
+ int bpp;
+ unsigned int flags;
+
+ int (*setup)(struct platform_device *pdev);
+ void (*teardown)(struct platform_device *pdev);
+ void (*blank)(int blank_mode, struct fb_info *info);
+};
+
+#endif /* __ASM_ARCH_EP93XXFB_H */
struct i2c_board_info;
struct platform_device;
+struct ep93xxfb_mach_info;
struct ep93xx_eth_data
{
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
void ep93xx_register_pwm(int pwm0, int pwm1);
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
void ep93xx_pwm_release_gpio(struct platform_device *pdev);
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff